COMPACT SYSTEMS
EF260 pH/ORP SERIES – COMPACT pH/ORP CONTROLLERS WITH CHLORINE DOSER CONTROL
Compact control unit for swimming pools, for pH / chlorine controls.
This model measures the pH with a special electrode and adjusts the acid dosage accordingly, while the chlorine concentration is determined indirectly, through ORP measurements (mV).
The acid dosage is performed by an integrated pump (electromagnetic or peristaltic), while the chlorine dosing device (for example, a salt chlorinator) is controlled by a special relay output.
- Compact system for pH and ORP measurements
- Version with electromagnetic pump (EF267) or peristaltic pump (EF266) for acid dosing
- 230V relay output for chlorine dosing device control
- Methacrylate electrode holder with pin for water sample analysis
- Multi-lingual menu
- Digital input OFF to be connected to the filter pump contactor
- Acid pump level probe input
- Power supply 230 V~, 50 Hz
- Compact IP65 case, for wall installation
- Included: Standard accessories for dosing pump (pipes, injection valve, foot filter), measuring sensors and calibration solutions
EF265 pH/ORP – COMPACT pH/ORP CONTROL UNIT WITH PERISTALTIC PUMPS
Compact swimming pool controller for pH / chlorine controls.
This model measures pH with a special electrode, while chlorine concentration is determined indirectly, through ORP (mV) measurements.
Acid and chlorine dosing is performed by two integrated peristaltic pumps.
- Compact system for pH and ORP measurements
- On-board peristaltic pumps, with Santoprene® internal tube
- 1.5 l/h pump for pH regulation (acid dosing) and 6 l/h pump for chlorine dosing
- Multi-lingual menu
- Digital input OFF to be connected to the filter pump contactor
- Two inputs for level probes
- Power supply 230 V~, 50 Hz
- Compact IP65 case, for wall installation
- Included: standard accessories for two dosing pumps (pipes, injection valve, bottom filter), calibration solutions, measuring sensors with 2.5 m cable and electrode holder with bracket for direct installation in the pipeline
EF270 / EF300 pH/ORP SERIES – COMPACT pH/ORP CONTROLLERS WITH TWO INTEGRATED DOSING HEADS
Compact control unit for swimming pools, for pH / chlorine controls.
These models measure the pH with a special electrode and adjust the acid dosage accordingly, while the chlorine concentration is determined indirectly, through ORP measurements (mV).
The acid and chlorine dosage is performed by two integrated electromagnetic or peristaltic heads
- Compact systems for pH and ORP measurements
- EF300 pH/ORP Series: version with two electromagnetic heads, 10 or 5 l/h
- Model EF270 pH/ORP: version with two peristaltic pumps, 1.5 l/h for acid dosing and 6 l/h for chlorine dosing
- Methacrylate electrode holder with pin for water sample analysis
- Multi-lingual menu
- Digital input OFF to be connected to the filter pump contactor
- Two inputs for level probes
- Optional RS232 serial port, for remote control
- Power supply 230 V~, 50 Hz
- Compact IP65 case, for wall installation
- Included: Standard accessories for two dosing pumps (pipes, injection valve, foot filter), measuring sensors and calibration solutions
EF300 pH/ CHLORINE SERIES – COMPACT CONTROL UNITS FOR pH/CHLORINE ( OR BROMINE) REGULATION IN POOLS
Compact control unit for swimming pools, for pH / chlorine controls.
These models measure the pH with a special electrode and adjust the acid dosage accordingly, while the chlorine concentration is determined with an amperometric cell (open or ion-selective membrane). Also available in a version for bromine measurement.
The control units are also equipped with a PT100 temperature probe and methacrylate probe holder with sample water flow regulation and proximity sensor.
Two outputs are available for controlling the acid and chlorine dosing pumps.
- Compact systems for pH and chlorine (or bromine) measurements
- Model EF300 pH/CLE/T: version with open amperometric cell
- Model EF300 pH/CAC/T: version with closed amperometric cell, with selective membrane
- Methacrylate probe holder with incoming sample water flow regulation and analysis pin
- Proximity sensor pre-wired and assembled in the probe holder
- Multi-lingual menu
- Two 230 V~ control outputs, for acid and oxidant dosing (chlorine or bromine)
- Two inputs for level probes
- RS232 serial port for remote control, optional or standard, depending on the model
- Power supply 230 V~, 50 Hz
- Compact IP65 case, for wall installation
- Control unit supplied with measurement sensors and calibration solutions
POOL-TIMER MINI – TIMED DOSING SYSTEM
Timed dosing system, suitable for example for adding an anti-algae agent to the pool.
Pool-Timer Mini includes a clock for setting the system activation times and a peristaltic pump for dosing the chemical product into the pool.
- Compact system with integrated timer and peristaltic pump
- Weekly scheduling of daily dosing times
- Peristaltic pump 2.4 l/h, with Santoprene tube
- Supplied complete with standard peristaltic pump accessories
- Power supply 230 V~ ±10 %, 50/60 Hz
- Wall Mounted Speaker
