TRIO.BAS MULTIFLEX AIR SAMPLER
MICROBIOLOGICAL AIR SAMPLERS
- TRIO.BAS™ Mini Microbial Air Sampler
- TRIO.BAS™ Mono Microbial Air Sampler
- TRIO.BAS™ Airbio Mono Air Sampler
- TRIO.BAS™ Duo Air Sampler
- TRIO.BAS™ Airbio Duo Air Sampler
- TRIO.BAS™ Trio Microbial Air Sampler
- TRIO.BAS™ Multistation Air Sampler
- TRIO.BAS™ Isolator Rabs Air Sampler
- TRIO.BAS™ Multiflex Air Sampler
Trio.bas Multiflex Air Sampler. One external command unit completely fabricated in stainless steel with cable for charging, connected to one fixed and two independent satellites
TRIO.BAS™ Mini
This air sampler is especially for customers who usually make few number of tests.
TRIO.BAS™ Mono
This air sampler is for customers who make a large number of controls, in different environments (i.e. cleanroom), with a large staff rotation and that comply with the quality standards and QM/GMP.
TRIO.BAS™ Airbio
This air sampler is for customers who make a large number of controls, in different environments (i.e. cleanroom), with a large staff rotation and that comply with the quality standards and QM/GMP.
TRIO.BAS™ Duo
The two aspirating heads give the possibility to reduce sampling time / operate with different cultures at the same time / monitor at rest, in operation, at the end of shift.
TRIO.BAS™ Airbio Duo
The two aspirating heads give the possibility to reduce sampling time / operate with different cultures at the same time / monitor at rest, in operation, at the end of shift.
TRIO.BAS™ Trio
The three aspirating heads give the possibility to reduce sampling time / operate with different cultures at the same time / monitor at rest, in operation, at the end of shift.
TRIO.BAS™ Multistation
This Air sampler is for customers who make an average and high number of controls and that comply with the quality standards and QM GLP / GMP.
TRIO.BAS™ Isolator Rabs and Multiflex
This Air sampler is for customers who make an average and high number of controls and that comply with the quality standards and QM GLP / GMP.
Trio.bas Multiflex 1+2
Trio.bas Multiflex Air Sampler
One external command unit completely fabricated in stainless steel with cable for charging, connected to one fixed and two independent satellites
- The MULTIFLEX 1+2 air sampler and satellites are fabricated in AISI 316 rated stainless steel.
- This air sampler is especially dedicated to customers who make a large number of controls, in different environments, with a large staff rotation in compliance with the quality standards and QM/GMP.
- Main customers are pharmaceuticals, cleanrooms and biotech industries.
- A barcode module, thanks to the use of a scanner (barcode reader) with Bluetooth, automatically records the operator, place and plates used for the sampling. The data collected by the barcode reader are transmitted directly to the instrument. This solution is useful for those who already use culture plates with barcode or 2-D barcode (QR Quick Response Code). The data collected are transferred via Bluetooth from the air sampler to a PC or laptop. PC or laptop request a dedicated software installed.
- The data is transferred via Bluetooth between the air sampler and a smartphone or tablet (Android version) and then to a PC or laptop.
- It is possibile to work either in manual or automatic mode.
- The data may be transferred via cable, too. This is helpful for all companies that, due to internal policy, are not allowed to use wireless transfer.
- The battery is recharged by a power cable connected directly to the air sampler.
- The 200 lts/min air flow reduces the operator time and the time sampling.
- This air sampler allows to monitor separated cleanrooms with a single external command unit. The risk of human contamination is reduced, because the satellite units are permanently inside each cleanroom.
- The use of sterile “Daily Shift” aspirating heads reduces the risk of contamination.
- The possibility to use 2/3 different aspirating heads allows to have 2/3 different culture media at the same time or to make sampling BEFORE (at rest), DURING (in operation) and at the END of each processing cycle.
Trio.bas Multiflex Air Sampler
PERFORMANCES
IDENTIFICATION CODES
| Code | TRIO.BAS MULTIFLEX 1+2 PACK (*) |
|---|---|
| 474K | TRIO.BAS™ MULTIFLEX 1+2 100 Contact with cable (100 litres/min flow rate) |
| 475K | TRIO.BAS™ MULTIFLEX 1+2 100 Petri with cable (100 litres/min flow rate) |
| 476K | TRIO.BAS™ MULTIFLEX 1+2 200 Contact with cable (200 litres/min flow rate) |
| 477K | TRIO.BAS™ MULTIFLEX 1+2 200 Petri with cable (200 litres/min flow rate) |
(*) each PACK consists of: 1 TRIO.BAS MULTIFLEX 1, 1 calibration certificate, 2 s/s satellite, 2 s/s aspirating head with s/s cover head, 2 cable connection (5 mt), 1 robustus carrying case.
| Code | SATELLITE UNIT PACK(*) |
|---|---|
| 260K | SATELLITE UNIT Contact PACK |
| 261K | SATELLITE UNIT Petri PACK |
| 262K | SATELLITE with HEPA FILTER Contact PACK |
| 263K | SATELLITE with HEPA FILTER Petri PACK |
| 258K | SATELLITE WALL with HEPA filter Contact PACK |
| 259K | SATELLITE WALL with HEPA filter Petri PACK |
(*) each PACK consists of: 1 s/s satellite, 1 s/s aspirating head with s/s cover head, 1 cable connection (5 mt).
(**) second or third satellite to be added to basic sampler.
| Code | SATELLITE ACCESSORIES |
|---|---|
| 273 | S/S HOLDER for lid of Petri plates for satellite |
| 266 | S/S RIGID TUBE connection for cable satellite – 170 mm |
| 267 | S/S TUBE WALL connection for cable satellite |
| 265 | CABLE CONNECTION between the satellite and the command unit – 1 set of 5 meters |
| 266 | CABLE CONNECTION between the satellite and the command unit – 1 set of 20 meters |
Trio.bas Multiflex 1
Trio.bas Multiflex Air Sampler
Trio.bas Multiflex Air Sampler
Stainless steel command unit with one aspiration head incorporated and cable for charging
- The MULTIFLEX 1 air sampler is made in AISI 316 rated stainless steel.
- This air sampler is especially dedicated to customers who make a large number of controls, in different environments, with a large staff rotation and comply with the quality standards and QM/GMP.
- Main customers are pharmaceuticals, cleanrooms and biotech industries.
- A barcode module, thanks to the use of a scanner (barcode reader) with Bluetooth, automatically records the operator, place and plates used for the sampling. The data collected by the barcode reader is transmitted directly to the instrument. This solution is useful for those who already use culture plates with barcode or 2-D barcode (QR Quick Response Code). The data collected is transferred via Bluetooth from the air sampler to a PC or laptop via a dedicated software installed.
- The data is transferred via Bluetooth between the air sampler and a smartphone or tablet (Android version) and then to a PC or laptop.
- It is possibile to work either in manual or automatic mode.
- The data may be transferred via cable, too. This is helpful for all companies that, due to internal policy, are not allowed to use wireless transfer.
- The battery is recharged by a power cable connected directly to the air sampler.
- While under charging, the air sampler can sample.
- The 200 lts/min air flow reduces the operator time and the time sampling.
- The use of sterile “Daily Shift” aspirating heads reduces the risk of contamination.
- Possibility to add one/two satellites to monitor other points in the cleanroom.
Trio.bas Multiflex Air Sampler
PERFORMANCES
IDENTIFICATION CODES
| ode | TRIO.BAS MULTIFLEX 1 PACK (*) |
|---|---|
| 483K | TRIO.BAS MULTIFLEX 1 100 Contact pack with cable (100 litres/min flow rate) |
| 484K | TRIO.BAS MULTIFLEX 1 100 Petri pack with cable (100 litres/min flow rate) |
| 485K | TRIO.BAS MULTIFLEX 1 200 Contact pack with cable (200 litres/min flow rate) |
| 486K | TRIO.BAS MULTIFLEX 1 200 Petri pack with cable (200 litres/min flow rate) |
(*) each PACK consists of: 1 TRIO.BAS MULTIFLEX with battery charger, 1 aspirating head with s/s cover head, 1 robustus carrying case, 1 cable for data transfer, 1 calibration certificate.
