TRIO.BAS™ AIRBIO MONO AIR SAMPLER

Trio bas airbio mono air sampler primary applications are for pharmaceutical asepting filling suites, cleanrooms, biotech, IVF clinics, operating theaters, hospital, pharmacies, blood banks, clinical microbiological labs, HVAC systems monitoring, environmental labs.

TRIO.BAS™ Mini

This air sampler is especially for customers who usually make few number of tests.

TRIO.BAS™ Mono

This air sampler is for customers who make a large number of controls, in different environments (i.e. cleanroom), with a large staff rotation and that comply with the quality standards and QM/GMP.

TRIO.BAS™ Airbio

This air sampler is for customers who make a large number of controls, in different environments (i.e. cleanroom), with a large staff rotation and that comply with the quality standards and QM/GMP.

TRIO.BAS™ Duo

The two aspirating heads give the possibility to reduce sampling time / operate with different cultures at the same time / monitor at rest, in operation, at the end of shift.

TRIO.BAS™ Airbio Duo

The two aspirating heads give the possibility to reduce sampling time / operate with different cultures at the same time / monitor at rest, in operation, at the end of shift.

TRIO.BAS™ Trio

The three aspirating heads give the possibility to reduce sampling time / operate with different cultures at the same time / monitor at rest, in operation, at the end of shift.

TRIO.BAS™ Multistation

This Air sampler is for customers who make an average and high number of controls and that comply with the quality standards and QM GLP / GMP.

TRIO.BAS™ Isolator Rabs and Multiflex

This Air sampler is for customers who make an average and high number of controls and that comply with the quality standards and QM GLP / GMP.

Trio bas Airbio Mono Cable

A stationary and portable single aspirating head with Bluetooth capability and cable for charging

  • This air sampler is especially dedicated to customers who make a large number of controls, in different environments, with a large staff rotation in compliance with quality standards and QM/GMP.
  •  
  • Primary applications are for pharmaceutical asepting filling suites, cleanrooms, biotech, IVF clinics, operating theaters, hospital, pharmacies, blood banks, clinical microbiological labs, HVAC systems monitoring, environmental labs.
  •  
  • An optional barcode module, via the use of a scanner (barcode reader) with Bluetooth, automatically records the operator, place and plates used for the sampling. The data collected by the barcode reader is transmitted directly to the instrument. This solution is useful for those who already use culture plates with barcode or 2-D barcode (QR Quick Response Code).
  •  
  • The data is transferred via Bluetooth between the air sampler and a smartphone or tablet (Android version) and then to a PC or laptop, via a dedicated software installed.
  •  
  • The data may be transferred via cable, too. This is helpful for all companies that, due to internal policy, are not allowed to use wireless transfer.
  •  
  • The battery is recharged by a power cable connected directly to the air sampler.
  •  
  • It is possible to work either in manual or automatic mode.
  •  
  • The 200 lts/min air flow reduces the operators and time sampling.
  •  
  • The use of optional sterile “Daily Shift” aspirating heads reduces the risk of contamination.
  •  
  • Possibility to have the version with external HEPA filter that allows to retain the particulates.
  •  

IDENTIFICATION CODES

CodeAIRBIO ONE cable PACK (*)
445KAIRBIO ONE 100 Contact PACK with cable (100 litres/min flow rate)
446KAIRBIO ONE 100 Petri PACK with cable (100 litres/min flow rate)
447KAIRBIO ONE 200 Contact PACK with cable (200 litres/min flow rate)
448KAIRBIO ONE 200 Petri PACK with cable (200 litres/min flow rate)

(*) each pack consists of: 1 air sampler with Bluetooth and power battery charger, 1 s/s aspiration head with s/s cover head, 1 calibrate certificate, 1 cable for data transfer, 1 robustus carrying case.

Trio bas Mini Microbial Air Sampler

PERFORMANCES

Technopolymer shockproof body with antibacterial performances of surfaces
Compliant according to EN/ISO 14698-1, GMP and GLP
Stainless steel aspirating head with quick bayonet closure, identification number and stainless steel cover to prevent contaminations
Volume of aspirated air: 100 or 200 lt/m
Selected volumes from 30 to 2.000 litres and 17 prefixed programs
The aspirating chamber is suitable for 55 mm Contact plate or 90 mm Petri dish
Auto calibration: power/flow electronic real time control
Power supply system: the instrument can be charged continuously by AC powered source 110/240 volt 50/60 hz or by rechargeable battery (inserted inside the air sampler)
Battery cycles autonomy: 30.000 litres
IP65 protection certificate from dust and water
Language: English, French, German, Spanish, Italian
Manual and automatic passwords
Operative aspirating cycles: manual and automatic
Memorized data: up to 1.000 samples
Configuration users and places: 100
Delayed, remote, start, simultaneous or interval sampling
Bluetooth connection or cable for data transfer
Automatic next calibration reminder
Data integrity CFR 21 and GAMP5
CE mark
Continuous/trending analysis according to the USP
Dimension: 15x15x24h cm
Weight: 1600 gr
Built in ISO 9001 premises

Trio bas Airbio Mono Induction

A stationary and portable single aspirating head with Bluetooth capability and battery induction charger

  • This air sampler is especially dedicated to customers who make a large number of controls, in different environments, with a large staff rotation in compliance with quality standards and QM/GMP.
  • Primary applications are for pharmaceutical asepting filling suites, cleanrooms, biotech, IVF clinics, operating theaters, hospital, pharmacies, blood banks, clinical microbiological labs, HVAC systems monitoring, environmental labs.
  • An optional barcode module, via the use of a scanner (barcode reader) with Bluetooth, automatically records the operator, place and plates used for the sampling. The data collected by the barcode reader is transmitted directly to the instrument. This solution is useful for those who already use culture plates with barcode or 2-D barcode (QR Quick Response Code).
  • The data collected is transferred via Bluetooth from the air sampler to a PC or laptop via a dedicated software installed
  • The data is transferred via Bluetooth between the air sampler and a smartphone or tablet (Android version) and then to a PC or laptop.
  • It is possible to work either in manual or automatic mode.
  • The battery is recharged by a base station induction charger without any cable connection between the air sampler and the charger.
  • The 200 lts/min air flow reduces the operators and time sampling.
  • The use of optional sterile “Daily Shift” aspirating heads reduces the risk of contamination.
  • Possibility to have the version with external HEPA filter that allows to retain the particulates.

IDENTIFICATION CODES

CodeAIRBIO ONE induction PACK (*)
433KAIRBIO ONE 100 Contact PACK (100 litres/min flow rate)
434KAIRBIO ONE 100 Petri PACK (100 litres/min flow rate)
435KAIRBIO ONE 200 Contact PACK (200 litres/min flow rate)
436KAIRBIO ONE 200 Petri PACK (200 litres/min flow rate)

(*) each pack consists of: 1 air sampler with Bluetooth, 1 base station induction charger, 1 s/s aspiration head with s/s cover head, 1 calibrate certificate, 1 robustus carrying case.

PERFORMANCES

Technopolymer shockproof body with antibacterial performances of surfaces
Compliant according to EN/ISO 14698-1, GMP and GLP
Stainless steel aspirating head with quick bayonet closure, identification number and stainless steel cover to prevent contaminations
Volume of aspirated air: 100 or 200 lt/m
Selected volumes from 30 to 2.000 litres and 17 prefixed programs
The aspirating chamber is suitable for 55 mm Contact plate or 90 mm Petri dish
Auto calibration: power/flow electronic real time control
Battery cycles autonomy: 30.000 litres
IP65 protection certificate from dust and water
Language: English, French, German, Spanish, Italian
Manual and automatic passwords
Operative aspirating cycles: manual and automatic
Memorized data: up to 1.000 samples
Configuration users and places: 100
Delayed, remote, start, simultaneous or interval sampling
Bluetooth connection or cable for data transfer
Automatic next calibration reminder.
Data integrity CFR 21 and GAMP5
CE mark
Continuous/trending analysis according to the USP
Dimension: 15x15x24h cm
Weight:1600 gr. (with stainless steel aspiration head mounted)
Built in ISO 9001 premises

Trio bas Airbio Mono Microbial Air Sampler

Follow by Email
LinkedIn
LinkedIn
Share