TRIO.BAS MULTIFLEX AIR SAMPLER

TRIO.BAS™ Mini

This air sampler is especially for customers who usually make few number of tests.

TRIO.BAS™ Mono

This air sampler is for customers who make a large number of controls, in different environments (i.e. cleanroom), with a large staff rotation and that comply with the quality standards and QM/GMP.

TRIO.BAS™ Airbio

This air sampler is for customers who make a large number of controls, in different environments (i.e. cleanroom), with a large staff rotation and that comply with the quality standards and QM/GMP.

TRIO.BAS™ Duo

The two aspirating heads give the possibility to reduce sampling time / operate with different cultures at the same time / monitor at rest, in operation, at the end of shift.

TRIO.BAS™ Airbio Duo

The two aspirating heads give the possibility to reduce sampling time / operate with different cultures at the same time / monitor at rest, in operation, at the end of shift.

TRIO.BAS™ Trio

The three aspirating heads give the possibility to reduce sampling time / operate with different cultures at the same time / monitor at rest, in operation, at the end of shift.

TRIO.BAS™ Multistation

This Air sampler is for customers who make an average and high number of controls and that comply with the quality standards and QM GLP / GMP.

TRIO.BAS™ Isolator Rabs and Multiflex

This Air sampler is for customers who make an average and high number of controls and that comply with the quality standards and QM GLP / GMP.

Trio.bas Multiflex 1+2

Trio.bas Multiflex Air Sampler

One external command unit completely fabricated in stainless steel with cable for charging, connected to one fixed and two independent satellites

  • The MULTIFLEX 1+2 air sampler and satellites are fabricated in AISI 316 rated stainless steel.
  • This air sampler is especially dedicated to customers who make a large number of controls, in different environments, with a large staff rotation in compliance with the quality standards and QM/GMP.
  • Main customers are pharmaceuticals, cleanrooms and biotech industries.
  • A barcode module, thanks to the use of a scanner (barcode reader) with Bluetooth, automatically records the operator, place and plates used for the sampling. The data collected by the barcode reader are transmitted directly to the instrument. This solution is useful for those who already use culture plates with barcode or 2-D barcode (QR Quick Response Code). The data collected are transferred via Bluetooth from the air sampler to a PC or laptop. PC or laptop request a dedicated software installed.
  • The data is transferred via Bluetooth between the air sampler and a smartphone or tablet (Android version) and then to a PC or laptop.
  • It is possibile to work either in manual or automatic mode.
  • The data may be transferred via cable, too. This is helpful for all companies that, due to internal policy, are not allowed to use wireless transfer.
  • The battery is recharged by a power cable connected directly to the air sampler.
  • The 200 lts/min air flow reduces the operator time and the time sampling.
  • This air sampler allows to monitor separated cleanrooms with a single external command unit. The risk of human contamination is reduced, because the satellite units are permanently inside each cleanroom.
  • The use of sterile “Daily Shift” aspirating heads reduces the risk of contamination.
  • The possibility to use 2/3 different aspirating heads allows to have 2/3 different culture media at the same time or to make sampling BEFORE (at rest), DURING (in operation) and at the END of each processing cycle.

Trio.bas Multiflex Air Sampler

PERFORMANCES

AISI 316 rated stainless steel (command unit + satellite units)
Complaint according EN/ISO 14698-1, GMP and GLP
Stainless steel aspirating head with quick bayonet closure, identification number and stainless steel cover to prevent contamination
Volume of aspirated air: 100 or 200 l/m
Selected volumes from 30 to 2.000 litres and 17 preset programs
The aspirating chamber is suitable for 55 mm Contact plates or 90 mm Petri dishes
Auto calibration: power/flow electronic real time control
Power supply system: the instrument can be charged continuosly by AC powered source 110/240 Volt 50/60 Hz or by rechargeable batteries (inserted inside the air sampler)
Cycles battery autonomy: 60.000/70.000 litres
Language: English, French, German, Spanish, Italian
Manual and automatic passwords
Operative aspirating cycles: manual and automatic
Memorized data: up to 1.000 sampler
Configuration users and places: 100
Delayed, remote, start, simultaneous or interval sampling
Bluetooth connection or cable for data transfer
Automatic next calibration reminder
Data integrity CFR 21 and GAMP5
CE mark
Continuous/trending analysis according to the USP
Dimension: 25x13x18h cm
Weight: 4100 gr
Built in ISO 9001 premises

IDENTIFICATION CODES

CodeTRIO.BAS MULTIFLEX 1+2 PACK (*)
474KTRIO.BAS™ MULTIFLEX 1+2 100 Contact with cable (100 litres/min flow rate)
475KTRIO.BAS™ MULTIFLEX 1+2 100 Petri with cable (100 litres/min flow rate)
476KTRIO.BAS™ MULTIFLEX 1+2 200 Contact with cable (200 litres/min flow rate)
477KTRIO.BAS™ MULTIFLEX 1+2 200 Petri with cable (200 litres/min flow rate)

(*) each PACK consists of: 1 TRIO.BAS MULTIFLEX 1, 1 calibration certificate, 2 s/s satellite, 2 s/s aspirating head with s/s cover head, 2 cable connection (5 mt), 1 robustus carrying case.

CodeSATELLITE UNIT PACK(*)
260KSATELLITE UNIT Contact PACK
261KSATELLITE UNIT Petri PACK
262KSATELLITE with HEPA FILTER Contact PACK
263KSATELLITE with HEPA FILTER Petri PACK
258KSATELLITE WALL with HEPA filter Contact PACK
259KSATELLITE WALL with HEPA filter Petri PACK

(*) each PACK consists of: 1 s/s satellite, 1 s/s aspirating head with s/s cover head, 1 cable connection (5 mt).
(**) second or third satellite to be added to basic sampler.

CodeSATELLITE ACCESSORIES
273S/S HOLDER for lid of Petri plates for satellite
266S/S RIGID TUBE connection for cable satellite – 170 mm
267S/S TUBE WALL connection for cable satellite
265CABLE CONNECTION between the satellite and the command unit – 1 set of 5 meters
266CABLE CONNECTION between the satellite and the command unit – 1 set of 20 meters

Trio.bas Multiflex 1

Trio.bas Multiflex Air Sampler

Trio.bas Multiflex Air Sampler

Stainless steel command unit with one aspiration head incorporated and cable for charging

  • The MULTIFLEX 1 air sampler is made in AISI 316 rated stainless steel.
  • This air sampler is especially dedicated to customers who make a large number of controls, in different environments, with a large staff rotation and comply with the quality standards and QM/GMP.
  • Main customers are pharmaceuticals, cleanrooms and biotech industries.
  • A barcode module, thanks to the use of a scanner (barcode reader) with Bluetooth, automatically records the operator, place and plates used for the sampling. The data collected by the barcode reader is transmitted directly to the instrument. This solution is useful for those who already use culture plates with barcode or 2-D barcode (QR Quick Response Code). The data collected is transferred via Bluetooth from the air sampler to a PC or laptop via a dedicated software installed.
  • The data is transferred via Bluetooth between the air sampler and a smartphone or tablet (Android version) and then to a PC or laptop.
  • It is possibile to work either in manual or automatic mode.
  • The data may be transferred via cable, too. This is helpful for all companies that, due to internal policy, are not allowed to use wireless transfer.
  • The battery is recharged by a power cable connected directly to the air sampler.
  • While under charging, the air sampler can sample.
  • The 200 lts/min air flow reduces the operator time and the time sampling.
  • The use of sterile “Daily Shift” aspirating heads reduces the risk of contamination.
  • Possibility to add one/two satellites to monitor other points in the cleanroom.

Trio.bas Multiflex Air Sampler

PERFORMANCES

AISI 316 rated stainless steel
Compliant according EN/ISO 14698-1, GMP and GLP
Volume of aspirated air: 100 or 200 l/m
Selected volumes from 30 to 2.000 litres and 17 preset programs
The aspirating chamber is suitable for 55 mm Contact plates or 90 mm Petri dishes
Auto calibration: power/flow electronic real time control
Power supply system: the instrument can be charged continuosly by AC powered source 110/240 Volt 50/60 Hz or by rechargeable batteries (inserted inside the air sampler)
Cycles battery autonomy: 60.000/70.000 litres
Language: English, French, German, Spanish, Italian
Manual and automatic passwords
Operative aspirating cycles: manual and automatic
Memorized data: up to 1.000 samples
Configuration users and places: 100
Delayed, remote, start, simultaneous or interval sampling
Bluetooth connection or cable for data transfer
Automatic next calibration reminder
Data integrity CFR 21 and GAMP5
CE mark
Continuous/trending analysis according to USP
Dimension: 25x13x18h cm
Weight: 4100 gr
Built in ISO 9001 premises

IDENTIFICATION CODES

odeTRIO.BAS MULTIFLEX 1 PACK (*)
483KTRIO.BAS MULTIFLEX 1 100 Contact pack with cable (100 litres/min flow rate)
484KTRIO.BAS MULTIFLEX 1 100 Petri pack with cable (100 litres/min flow rate)
485KTRIO.BAS MULTIFLEX 1 200 Contact pack with cable (200 litres/min flow rate)
486KTRIO.BAS MULTIFLEX 1 200 Petri pack with cable (200 litres/min flow rate)

(*) each PACK consists of: 1 TRIO.BAS MULTIFLEX with battery charger, 1 aspirating head with s/s cover head, 1 robustus carrying case, 1 cable for data transfer, 1 calibration certificate.

Trio.bas Multiflex Air Sampler