Laboratory World
- Laboratory World
- Biotechnology
- Diagnostics
- Analytical
- Measurement and Testing
- Environmental Technology
Cooling and Freezing
LR / LF -series - Slimline laboratory freezers & refrigerators
Discover the powerful SCO- Tech Slimline Laboratory Freezers & Refrigerators for your laboratory. Space-saving design, precise temperature control and energy-efficient technology.
The Slimline laboratory refrigerators and freezers offer a wide range of configurations ranging from routine laboratory applications up to high demanding storage protocols for blood banking.
Temperature ranges which are available:
LR series + 1ºC / + 8°C
LF series -18ºC / -22ºC
Performance Features:
■ Standard stainless steel interior
■ Microprocessor control with digital display / controller;
■ Adjustable temperature set points;
■ High temperature alarm;
■ Low temperature alarm;
■ Date, time, alarm buzzer;
■ Infrared data transmission;
■ Dry contact for remote alarm;
■ Door open alarm;
■ Unique traceability of alarms with storage history of last 20 alarm events;
■ Auto switch off fan when door opens;
■ Chamber with rounded corners for easy cleaning;
■ 60 mm of CFC-free polyurethane foam insulation;
■ Always pass through standard doors because of Slimline design: only 80 cm wide and 198 cm high;
■ Standard fitted with heavy duty double-roll casters for easy transportation (lockable);
■ Flexible storage: you can mix drawers, grids and shelves in one cabinet without any internal modifications
Ordering information’s:
Scala laboratory refrigerators | |
| LR130 | Scala laboratory refrigerators, capacity 130 L |
| LR130G | Scala laboratory refrigerators, capacity 130 L with glass door |
| LR700 | Scala laboratory refrigerators, capacity 670 L |
| LR700G | Scala laboratory refrigerators, capacity 670 L with glass door |
| LR1400 | Scala laboratory refrigerators, capacity 1325 L, 2 doors |
| LR1400G | Scala laboratory refrigerators, capacity 1325 L with glass doors, 2 doors |
Scala laboratory -20°C freezers | |
| LF130 | Scala laboratory freezer, -18 to -22 °C, capacity 130 L |
| LF700 | Scala laboratory freezer, -18 to -22 °C, capacity 670 L |
| LF1400 | Scala laboratory freezer, -18 to -22 °C, capacity 1325 L, 2 doors |
Accessories | |
| SSPP130 | Stainless steel perforated shelve (including pair of guides) 130L series |
| DR130 | Stainless steel roll-our drawer (including pair of guides) 130L series |
| GR150 | Additional plastified grid / shelve (including pair of guides) |
| SSPP150 | Stainless steel perforated shelve (including pair of guides) |
| DR150 | Stainless steel roll-our drawer (including pair of guides) |
| DV44 | Flexible divider kit for DR150 drawer |
| ST100 | Sample throughput with hole (18 mm inner diam,) with stopper |
| PS050 | Vapour proof power socket (single) |
| PS100 | Vapour proof power socket (double) |
| PT100PS | Additional PTlOO sensor installed inside cabinet ( buffered solution) |
| RA200 | Power failure alarm with battery (audible and visual alarm) |
| PR200 | Heated pressure release valve (2 way) for -35QC cabinets |
RBB – series - Blood Bank Refrigerator
Discover the advanced RBB Series at SCO-Tech – the perfect solution for your demanding laboratory applications. Maximum performance, precise results, and reliable technology.
Blood Bank Refrigerator includes a stable cooling system. Equipped with LED Display and integrated printer. Temperature range +4°C with 0,1 °C accuracy, suitable for Blood bags.
Performance features:
■ Four sensors design: two for display and two for controlling.
■ Foam-glass door, easy to observe, also keep a better cooling temperature.
■ Forced air refrigeration system, ensure inner temperature constant and uniform.
■ Adjustable shelves, improve space utilization; blood storage baskets can be classified.
■ Individual transparent inner door, effectively reduce cool air loss when opening the door.
Temp. Range | 4.0 °C / ±1°C |
| Temp. Accuracy | 0.1°C |
| Control System | Microprocessor control |
| Display | Large screen LED display |
| Alarm | Audio and visual alarm for: High or low temperature, Sensor failure, System failure; Door ajar; Power failure (all models) Condenser abnormal (for model: RBB-160/210) Low battery (for model: RBB-120/300/400) |
| Refrigeration Type | Forced air refrigeration system |
| Refrigerant | R134a, CFC-Free |
| Compressor | International famous compressor |
| Condenser & Evaporator | High efficiency air-cooled condenser, made of copper |
| Defrost | Auto defrost |
| Construction | Unibody Design, Mono-assembly foaming
(Rigid polyurethane insulation material) |
| Internal Material | Stainless steel |
Shelves | Adjustable shelves |
| Casters | 4 casters |
| Power Supply | AC220V ±10%, 50/60Hz |
Order information:
| Article No. | Model | Description of Article |
| 2.217.120 | RBB-120 | Blood Bank Refrigerator, 120L, +4°C, for 66 blood bags |
| 2.217.160 | RBB-160 | Blood Bank Refrigerator, 160L, +4°C, for 80 blood bags |
| 2.217.210 | RBB-210 | Blood Bank Refrigerator, 210L, +4°C, for 132 blood bags |
| 2.217.250 | RBB-250 | Blood Bank Refrigerator, 250L, +4°C, for 120 blood bags |
| 2.217.310 | RBB-310 | Blood Bank Refrigerator, 310L, +4°C, for 150 blood bags |
| 2.217.650 | RBB-650 | Blood Bank Refrigerator, 650L, +4°C, for 360 blood bags |
| 2.217.001 | RBB-1000 | Blood Bank Refrigerator, 1000L, +4°C, for 576 blood bags |
Electrochemical Instruemnts
TR – 100 Portable Turbidity Meter
High-performance portable turbidity meter, 2 to 5 points calibration, selectable 4 turbidity units. The meter is suitable for process control and field use.
Complete set with:
■ Calibration Standards (0/10/ 200/1000 NTU)
■ Sample Vials
■ lint-free cloth
■ Batteries
■ Carrying Case
| Turbidity Range: | 0~1100 NTU/FNU, 0~275 EBC, 0~9999 ASBC |
| Accuracy: | ±2% (0~500 NTU), ±3% (501~1100 NTU) |
| Calibration: | 2 to 5 points |
| System menu: | contains 7 optional parameters |
| Stores: | up to 100 data sets |
| Interface: | USB communication Interface |
TR – 200 Bench Top Turbidity Meter
Multiparameters benchtop turbidity meter with the Total Suspended Solids measurement mode, 2 to 7 points calibration, selectable 4 turbidity units. This meter is suitable for laboratory use.
Discover the “TR-200” by SCO-Tech – your ultimate solution for top-notch performance and precision. This cutting-edge technology excels in handling complex applications, delivering exceptional results. With its user-friendly interface, operating the “TR-200” is a breeze, while its adaptability allows for flexible customization to meet your specific requirements. Built with durability and reliability in mind, the “TR-200” guarantees long-lasting performance and outstanding outcomes.
Complete set with:
■ Calibration Standards (0/10/200/1000/1500 NTU)
■ Sample Vials
■ lint-free cloth
■ Power Adapter
| Type: | Benchtop turbidity meter |
| Turbidity Range: | 0~2000 NTU/FNU, 0~500 EBC, 0~9999 ASBC |
| TSS Range: | Deponds on conversion factor |
| Accuracy: | ±2% (0~500 NTU), ±3% (501~2000 NTU) |
| Calibration: | 2 to 7 points |
| System menu: | contains 7 optional parameters |
| Stores: | up to 200 data sets |
| Interface: | USB communication Interface |
Lab Furniture
Emergency Shower / Eye & face
Emergency Wall Mounted Eye/Face Wash
Discover the premium “Emergency Shower & Eye/Face Wash” products by SCO-Tech – your reliable partners in emergency situations. Designed to provide immediate assistance during crises, these products ensure quick and efficient flushing of eyes, face, and body. With their user-friendly design, they enable swift activation to minimize injuries and prevent potential harm. The “Emergency Shower & Eye/Face Wash” products are robust and durable, catering to demanding work environments. Our dedicated team is always ready to provide excellent customer service.
Composite Eyewash
EW-001
Carbon steel and ABS composite eyewash.
Red eyes soft foam nozzle flow, improve the cleaning efficiency of 50% compared to ordinary wash nozzle. Performance: super acid, alkali, salt, oil and other corrosive chemical substances.
| EW-4011 | Eye wash station |
| Parent Metal: Stainless steel (AISI 304) | |
| Minimun Working Pressure(dymanic): 2.0 bar/ 29.4 psi | |
| Maximum Working Pressure: 7 bar/ 100 psi | |
| The surface can be polishing or epoxy resin | |
| Mounting Cutout Size: 12mm diameter,depth 40mmdiameter |
Safety Cabinets
Biological Safety Cabinet Class I
Discover the “Biological Safety Cabinet Class I” by SCO-Tech – your ultimate safeguard for a secure laboratory environment. This cutting-edge safety cabinet provides Class I protection, ensuring operator safety and preventing contamination. With its advanced features and top-notch engineering, it creates a controlled and sterile workspace for handling hazardous materials. The “Biological Safety Cabinet Class I” is user-friendly and easy to operate, making it an essential tool for researchers and scientists.
The Class I Biosafety Cabinet does not protect the product from contamination because the un-purified room air constantly enters into work area.
Bilogical Safety Cabinet Class II B2
Biological Safety Cabinet Class II B2 with protection for operator, sample and environment.
A Class II B2 BSC, also called a total exhaust cabinet, is necessary when significant amounts of radionuclides and volatile chemicals are expected to be used.
Almost ninety percent of biosafety cabinets worldwide are Class II biosafety cabinets. The SCO Tech Class II is a specified European standard product. The most popular Class II laboratory equipment offers four protection functions, the personal protection, the protection of the environment, the cross-contamination protection and product or sample protection.
Introducing the “Biological Safety Cabinet Class II B2” by SCO Tech – your ultimate defense for a safe and secure laboratory environment. This state-of-the-art safety cabinet offers Class II B2 protection, ensuring maximum operator safety and contamination prevention. With its advanced features and impeccable engineering, it provides a controlled and sterile workspace for handling hazardous materials. The “Biological Safety Cabinet Class II B2” is designed for ease of use and efficiency, making it an indispensable tool for researchers and scientists.
The SCO Tech units are used as “stand alone” devices, providing containment of almost all biological hazards. They are created to be used also with external exhaust systems for use with volatile toxic chemicals.
■ Motorized Front Window.
■ Time Reserve Function.
■ HEPA Filter life and UV Life indicator.
■ Automatic air speed adjustable with filter block.
■ Work area surrounded by negative pressure, it can ensure maximum safety in work area.
■ Audio and visual alarm (Filter replacement, Window over height, abnormal Air flow velocity etc).
■ Most accessories are standard. No need to pay more, save your money.
■ Remote Control. All functions can be realized with it, making the operation much easier and more convenient.
■ Foot Switch. Adjust front window height by foot during experiment, to avoid airflow turbulence caused by arm movement.
■ Interlock Function: UV lamp and front window; UV lamp and blower, fluorescent lamp; Blower and front window.
Order Information:
Article No. | Model | Description |
| . | ||
| 0.380.2211 | LF-II B2 1100 | Biosafety Cabinet (Class II B2) |
| 0.380.2213 | LF-II B2 1300 | Biosafety Cabinet (Class II B2) |
| 0.380.2215 | LF-II B2 1500 | Biosafety Cabinet (Class II B2) |
| 0.380.2218 | LF-II B2 1800 | Biosafety Cabinet (Class II B2) |
Biosafety Cabinets, Class II A2
SCO Tech’s Class II biosafety cabinets are a prominent choice worldwide, constituting nearly 90% of biosafety cabinets in laboratories. Compliant with specified European Standards, SCO Tech’s Class II biosafety cabinets offer unparalleled protection across four critical areas:
Personal protection, Environmental protection, Cross-contamination protection, and Product or sample protection.
As standalone devices, these cabinets ensure robust containment of diverse biological hazards. They also provide the flexibility to be utilized with external exhaust systems, making them suitable for handling volatile toxic chemicals while maintaining top-notch safety standards. Trust SCO Tech’s Class II biosafety cabinets for comprehensive protection and superior performance in your laboratory.
■ Motorized front window.
■ Large LCD display, all information displayed.
■ Automatic air speeds adjustable with filter block.
■ With memory function in case of power-failure.
■ Side & back wall is made of single piece stainless steel
■ Single piece SS removable work tray.
■ Interlock function: UV lamp and front window; UV lamp and blower, fluorescent lamp; blower and front window.
■ Front 100 slanted to offer operator comfort while working for long time, reduce glare and maximize reach in to work area.
■ Armrest is above the intake of grill to enable farther reach inside the cabinet without hampering safe airflows inside the cabinet working area.
■ All the positive pressure contaminated plenums within the cabinet are surrounded by a negative air pressure plenum thus ensuring that any leakage from a contaminated plenum will be drawn into the cabinet and not released to the environment. Also the plenum to be under negative pressure to the room.
■ Differential pressure sensor for monitoring of condition of HEPA filters
Biosafety Cabinets, Class III
Class III Biosafety Cabinet is totally enclosed and gas-tight with ULPA filtered supply and exhaust air. Work is performed with long-sleeved gloves. The cabinet is kept under negative pressure of at least 120Pa and the airflow is maintained by a dedicated exterior exhaust system. It can protect the operator, product and the environment.
Discover our top-of-the-line Biosafety Cabinets Class III at SCO Tech – the ultimate solution for maximum protection in your research. With their airtight construction, these safety cabinets offer the highest level of security when handling hazardous biological substances. Designed to meet the strictest standards, they ensure complete separation between the user and the samples, preventing cross-contamination. Rely on the reliability and performance of our Biosafety Cabinets Class III for your most demanding laboratory requirements.
■ With memory function in case of power-failure.
■ UV lamp ensures work area sterilization effectively.
■ An angled cabinet front ensure an ergonomic working posture.
■ Exhaust air is double-filtered through high-quality HEPA filters with typical efficiency of 99.999% for 0.3μmparticles.
Cytotoxic Safety Cabinet
The Cytotoxic Safety Cabinet is the premium solution for cytotoxic / antineoplastic drug processing, providing the highest level of patient, pharmacist and environmental protection.
The unique demands of handling and preparing cytotoxic drugs for use in chemotherapy require a specialized cabinet.
Remote Control
All functions can be realized with it,making the operation much easeir and more convenient.
LCD Display
Large digital display is easy to monitor all the safety Parameters at a glance and ergonomically sizedcontrol panel improves users interface.
UV Lamp
Emission of 253.7 nanometers for most efficient decontamination.
Water and Gas Taps
High quality stainless steel.
Front Window
Motorized ,Two-layer laminated toughened glass＞5mm,anti UV.
Bag In and Bag Out Fliter
The PVC bag can ensure the safety of the personnel and the environment, and make the replacement process convenient and quick.
Horizontal Laminar Air Flow Cabinets, class 100
Class 100 with Stainless Steel work surface (CROSS FLOW) with Lateral Flow Concept side walls.
AURA HZ HORIZONTAL LAMINAR FLOW CABINET, A COMPLETE AND USER FRIENDLY TOOL FOR THE PROTECTION OF HIGHLY SENSITIVE PRODUCTS.
Explore our advanced Horizontal Laminar Air Flow Cabinets Class 100 at SCO Tech – the ultimate solution for a sterile and controlled laboratory environment. These cutting-edge cabinets provide a Class 100 clean room standard, ensuring a contamination-free workspace for sensitive operations. With horizontal airflow, they offer uniform distribution of filtered air, safeguarding your samples and procedures. Count on our Horizontal Laminar Air Flow Cabinets Class 100 to elevate your lab’s precision and reliability.
The internal design, the air flow aerodynamics and monitoring, the special H14 filter with Micromesh downstream equalizing plenum, guarantees the highest performances at the most stringent safety levels and operator comfort.
■ H14 class HEPA filter
■ Electronic control air speed
■ Working surface in stainless-steel (AISI304)
■ Side panels in tempered glass
■ Micromesh membrane on HEPA filter downstream surface for perfect airspeed distribution
■ Up to four plugs installable near the light on the ceiling of the cabinet to leave working surface free
■ Sizes: 1.2, 1.8
PCR Cabinet
These state of the art PCR cabinets are specially designed for pre-amplifi cation sample preparation in controlled environment in order to prevent DNA carry-over. Any aerosol generated during the handling of the post amplification samples can not enter the cupboard; any molecule of DNA herein contained is subsequently neutralised with the help of UV radiations.
These state-of-the-art PCR cabinets are specially designed for preapplication sample preparation in a controlled environment in order to prevent DNA carry-over.
Any aerosol generated during the handling of the post amplification samples cannot enter the cupboard; any molecule of DNA herein contained is subsequently neutralized with the help of UV radiations.
■ Passive PCR enclosure (non ventilated)
■ Fluorescent light turns on automatically when opening the front glass or when UV lights turn off (user selectable)
■ Digital timer for UV lights with memory of the last setpoint
■ 100% UV-safe
■ Front glass divided in three hinged sectors
■ Internal foldable shelf in glass
■ Working surface in chemical resistant polyethylene
Vacuum Glove Box
A stainless steel Vacuum Glove Box with Airlock chamber, heavy duty, with vacuum system.
Discover the VGB-series, SCO Tech’s stainless steel glove box with Airlock Chamber, Gauges, and vacuum flanges, providing the capability to operate under vacuum and eliminate moisture and oxygen without the need for expensive inert gas purging. This innovative glove box is a valuable asset for material and chemical researchers, facilitating the processing of air-sensitive materials and solutions with precision and safety. Experience the efficiency and reliability of the VGB-series for your critical research applications.
Vertical Laminar Air Flow Cabinets, class 100
Introducing the Vertical Laminar Air Flow Cabinets Class 100 by SCO Tech – the epitome of clean and sterile laboratory environments. These advanced cabinets adhere to the Class 100 cleanroom standard, ensuring a contamination-free workspace for delicate operations. With vertical airflow, they create a uniform distribution of filtered air, safeguarding your samples and processes with precision. Rely on the excellence and reliability of SCO Tech’s Vertical Laminar Air Flow Cabinets Class 100 to elevate your lab’s standards of precision and cleanliness.
■ Elapsed time-meter
■ Exhaust filter
■ Removable perforated work surface and back wall of the work chamber made of AISI 304 stainless steel
■ Cabinet outer surfaces made of cold rolled steel with paint finish
■ Front and side panels in 5mm thick tempered glass
■ H14 class HEPA (EN1822-1)
■ Exhaust filter (or pre-filter) type Filtrete® with a gravimetric efficiency higher than 99% on 3 μm particles
■ Optional cover with UV light (includes safety switch to turn off UV if cover is removed from the cabinet)
Ducted Fume Cupboard
Fume Hood is used to protect lab environment and operator during general chemical applications. It actively protects operator from inhaling toxic vapors and dramatically reduces the risk of fire and explosion. By installing proper filter, it can also protect Environment.
Explore the Ducted Fume Cupboard by SCO Tech – the ultimate solution for safe and efficient handling of hazardous fumes in your laboratory. This advanced fume cupboard is equipped with a ventilation system that directs harmful fumes away from the workspace, ensuring a secure and clean environment for researchers. With its user-friendly design and precise controls, it allows for optimal control and containment of harmful substances.
There are different types according to applications:
■ Auxiliary air
■ Constant air volume (CAV)
■ Non-bypass CAV
■ Bypass CAV
■ Reduced air volume (RAV)
■ Variable air volume (VAV)
■ Canopy fume hoods
Ductless Fume Cupboard
Discover the Ductless Fume Cupboard by SCO Tech – the cutting-edge solution for safe and versatile handling of hazardous substances in your laboratory. This innovative fume cupboard is designed with advanced filtration technology, eliminating the need for external ducting and offering flexibility in positioning within your workspace. With its efficient air purification system, it ensures maximum containment of harmful fumes, safeguarding both researchers and the environment.
■ Manufactured acc to Standards, BS7258 and BS 7989
■ Glass side walls for excelent visibility and easy cleaning
■ Integral fluorescence lighting
■ Visual and acoustic alarm
■ Soft-touch control panel with fan on-off switch, alarm mute and separate main switch
■ Epoxy painted cold rolled steel main body
■ Different kind of working surface ( Stainless, Polypropilene or Ceramic )
■ Water sink installed on work surface ( only SS Work Surface Model )
Safety Sotorage Cabinet
All safety storage Cabinets are manufacturer in accordance with the European standard DIN EN 14470 Part 1 and Part 2.
Our cabinetes are suitable for storage of hazardous materials and divided into
■ Fire resistant storage Cabinets
■ Non- Fire resistant storage cabinets
Features:
■ Two-layer anti-fire steel plate with 38mm between two steel plates for insulation.
■ Main body material: 1.0mm steel plate panted with epoxy resin.
■ Safety: Three-linkage lock. The door has two keys and is available to use padlock which realize safe management of double-locked with two key holders.
■ 50mm height anti-leakage liquid tank ensures no liquid overflow.
■ Specific warning labels for different no liquid overflow.
■ Specific warning labels for different kinds of safety storage cabinet.
■ Installed with double air vents which are set with anti-fire devices.
■ Adjustable anti-leakage shelves.
■ An electrostatic grounded conductive port for easy connection to an electrostatic ground wire
Incubation - Drying - Heating - Ashing
Universal Drying Oven
Whatever you want to perform: material tests, ageing of computer chips, run complex experiments with highly sensitive loads, drying or tempering electronic components, hardening plastic resin or heating plasticine.
The universal heating oven / drying oven stands for unparalleled precise, even and gentle temperature control.
■ Different model sizes / volume
■ Natural convection or forced air circulation N/F
■ Ovens with forced air circulation
■ Ovens with forced adjustable air circulation (with fan speed controller)
■ Ovens with forced adjustable air circulation and textured stainless steel exterior
■ Multi-chamber ovens forced air circulation
purposes in natural air-flow environment up to 350°C. Good technical parameters ensure to high-quality results.
This oven can be used in scientific laboratories, educational institutions, medicine and industry.
■ Mild steel chamber
■ Heating from four sides,
■ Natural air circulation without air fan,
■ Insulation – rock wool (complete lack of asbestos),
■ 3 shelves,
■ Outside casing – metal sheet, powder painted grey,
■ Door opening on the right, inner door in stainless steel, silicon joint,
■ Control panel is placed on the left side of the oven,
■ Non-programmable temperature controller – Omron E5CC,
■ Short heating up / cooling down period,
■ Low electric power usage for increased energy efficiency
Ashing Furnaces
High accuracy electric chamber furnaces with Ceramic Chamber up to 1300°C.
Ashing furnaces are manufactured using high quality and heavy duty metal parts and environmental friendly insolution materials.
Fit with a selection of preceise digital contollers and certified heating elements to ensure excellent temperature stability.
Fan-assisted chimney permits to eliminate smoke from the chamber during thermal processing. Ashing process is possible with several types of furnaces:
muffel furnaces, fiber-insulated chamber furnaces and ceramic chamber furnaces. This series of furnaces is suitable for ashing and burn off process in temperature of 900 – 1300°C.
■ Chamber made of vacuum-formed ceramic fiber / fiber thermal insulation plates / solid ceramic
■ Continous air change in the Chmaber
■ Door safety interlock switch
■ Non-programmable controller Omron E5C
■ Fan-assisted chimney for air extraction
■ Fast heating time due to low thermal mass construction
■ Good stability and uniformity
■ Low power consumption
■ Outside casing – metal sheet, powder painted grey
Additional ceramic hearth plates
■ Buzzer
■ Calibration of temperature measurement system
■ Data communication/USB
■ Data recorder
■ Digital timer
■ Gas box up to 1100 °C
■ Over temperature protection
■ Outside casing made of stainless steel
■ Process observation window (Ø 35 mm) up to 1100 °C
■ Protective gas injection system ( Nitrogen or Argon )
■ Metal tray
■ Table for supporting the oven
Ceramic Chamber Furnaces
High accuracy electric chamber furnaces with solid Ceramic Chamber up to 1300°C.
LF -series is manufactured using high quality and heavy duty metal parts and environmental friendly insolution materials.
Fit with a selection of preceise digital contollers and certified heating elements to ensure excellent temperature stability.
The furnaces include ceramic hearth plates. To eliminate gases or smoke that are released during thermal processing a ventilation
■ Ceramic bottom plate
■ Solid ceramic Chmaber
■ Outside casing – metal sheet, powder painted grey
■ Door opens sideway
■ Door safety interlock switch
■ Non-programmable controller Omron E5CC
■ Fast heating time due to low thermal mass construction
■ Good stability and uniformity
■ Heating elements partially exposed od enclosed in 4 sides of chamber
■ Low power consumption
■ Additional ceramic hearth plates
■ Buzzer
■ Calibration of temperature measurement system
■ Data communication/USB
■ Data recorder
■ Digital timer
■ Fan-assisted chimney for air extraction
■ Gas box up to 1100 °C
■ Over temperature protection
■ Outside casing made of stainless steel
■ Process observation window (Ø 35 mm) up to 1100 °C
■ Protective gas injection system ( Nitrogen or Argon )
■ Metal tray
■ Table for supporting the oven
Ceramic Furnace LF.XB
Flex Muffle Furnaces
■ 1000ºC – 1200ºC
■ Side swing door
■ Brick insulation (23/26)
Experience the precision and reliability of the Ceramic Furnace LF-XB by SCO Tech – your ultimate solution for high-temperature applications. This advanced furnace boasts cutting-edge technology, ensuring accurate and consistent heating performance. With user-friendly programmable controls, researchers can achieve precise temperature profiles for a wide range of materials. Elevate your lab’s capabilities and achieve exceptional results with SCO Tech’s Ceramic Furnace LF-XB.
■ CE manufactured
■ Affordable basic line
■ Maximum operating temperature: 1150ºC and 1260ºC
■ Compact and lightweight
■ Designed for occasional intermittent work
■ 2 heating plates with KANTHAL AF
■ Double low thermal mass insulation ( optional: Fiber insulation )
■ Built with low density ceramic 23/26 bricks and ceramic fiber 2″
■ Outer case in painted metal sheet (inox optional)
■ Ceramic chimney
■ Thermocouple type K, S
■ Spare parts easily replaceable by end user
■ Solid state relay
■ Ramp Progammer 1 program / 8 segments
■ PID parameters
■ Non-volatile memory
■ Microprocessor-based temperature controls
■ Alarm
■ Optional:
– 4 program / 15 segments programmer
– Programmers up to 64 segments
– Data logger and programmer communication by Ethernet/ RS232
Safety Sut-off:
■ Turns off upon door openin
Flex Muffel Furnace LF.HD
Economy Serie Muffle Furnace Laboratory
■ 1000ºC – 1200ºC
■ Drop dow & Side swing door
■ Brick insulation (23)
Discover the Flex Muffle Furnace LF-HD by SCO Tech – the epitome of versatility and reliability for your laboratory. This advanced muffle furnace is engineered with cutting-edge technology, offering flexibility in temperature control and uniform heating performance. With its user-friendly interface and programmable settings, researchers can tailor the furnace to suit various applications.
■ Affordable basic line
■ Maximum operating temperature: 1200ºC
■ Compact and lightweight
■ Designed for occasional intermittent work
■ 2 or 3 heating plates with KANTHAL AF
■ Double insulation includes air chamber
■ Built with low density ceramic 23/26 bricks and ceramic fiber
■ Outer case in painted metal sheet (inox optional)
■ Ceramic chimney
■ Thermocouple type K
■ Spare parts easily replaceable by end user
■ Solid state relay
■ PA Analogical control or:
■ PAD Digital control : Microprocessor-based / PID parameters / Non-volatile memory / Alarm
Laboratory Muffel Furnace LF-MF
MUFFLE LABORATORY FURNACES 1000º C – 1200º C – 1300º C.
.
■ MF Series: High Quality 24/7 Continuos-Tº Muffle Furnaces
■ 1000ºC – 1200ºC –1300ºC
■ Vertical parallel lift door
■ Refined design
■ Ceramic fiber insulation
■ Manufactured according to the CEE standards BS EN 61010-1-2001
Introducing the Laboratory Muffle Furnace LF-MF by SCO Tech – the ultimate choice for reliable and efficient heating in your laboratory. This state-of-the-art muffle furnace is equipped with cutting-edge technology, delivering precise temperature control and uniform heating performance. With its user-friendly interface and programmable features, researchers can easily tailor the furnace to meet their specific needs.
■ Maximum operating temperature: 1000ºC – 1200ºC – 1300ºC
■ Rapid heating
■ Compact and lightweight
■ 24/7 continuous work capability
■ 4 heating plates with KANTHAL AF
■ Low thermal mass insulation
■ Built with low density ceramic bricks and ceramic fiber
■ Double insulation includes air chamber
■ Outer case in painted metal sheet (inox optional)
■ Rear ventilation via ceramic chimney
■ Ceramic tray included
■ Thermocouple type K or S
■ Spare parts easily replaceable by end user
■ Solid state relay
■ General safety switch
■ General safety contactor
■ PAD Digital control : Microprocessor-based / PID parameters / Non-volatile memory / Alarm
Safety Sut-off:
■ Turns off upon door opening
Muffel Furnace – LF.PR
■ 1000ºC – 1200ºC – 1300ºC
■ Pantograph side door
■ Sturdy design
■ Brick insulation (23/26)
■ Manufactured according to the CE standards BS EN 61010-1-2001
■ CE manufactured
■ Maximum operating temperature: 1000ºC – 1200ºC – 1300ºC
■ Rapid heating
■ Compact and lightweight
■ 24/7 continuous work capability
■ 4 heating plates with KANTHAL AF
■ Low thermal mass insulation
■ Built with low density ceramic bricks and ceramic fiber
■ Double insulation includes air chamber
■ Outer case in painted metal sheet (inox optional)
■ Rear ventilation via ceramic chimney
■ Ceramic tray included
■ Thermocouple type K or S
■ Spare parts easily replaceable by end user
■ Solid state relay
■ General safety switch
■ General safety contactor
■ PAD Digital control : Microprocessor-based / PID parameters / Non-volatile memory / Alarm
■ Turns off upon door opening
Muffel Furnaces
High accuracy electric muffel furnace with fiber insulated chambers up to 1300°C.
High accuracy electric furnace with fiber insulated chambers. LF -series is manufactured using high quality and heavy duty
metal parts and environmental friendly insolution materials. Fit with a selection of preceise digital contollers and certified
heating elements to ensure excellent temperature stability. The furnaces include ceramic hearth plates. To eliminate gases or
smoke that are released during thermal processing a ventilation hole and exhaust system may be additionally installed in the product.
The furnaces are an excellent for scientific laboratories, educational institutions, medicine and industry, to be used for hardening,
loosening, normalising and other thermal processing up to 1100°C or 1300°C.
BASIC MODEL
■ One piece high thermal efficiency, vacuum-formed ceramic fiber chamber
■ Outside casing – metal sheet, powder painted grey
■ Ceramic bottom plate
■ Door opens upwards
■ Door safety interlock switch
■ Non-programmable controller Omron E5CC
■ Fast heating time due to low thermal mass construction
■ Good stability and uniformity
■ Heating elements, embedded in a vacuum formed fiber, are inside four walls of the chamber on models up to 1100°C
■ Heating elements are exposed on ciramic tubes on two sides of chamber on models up to 1300°C
■ Low power consumption
Options:.
■ Additional ceramic hearth plates
■ Buzzer
■ Calibration of temperature measurement system
■ Data communication/USB
■ Data recorder
■ Digital timer
■ Fan-assisted chimney for air extraction
■ Gas box up to 1100 °C
■ Over temperature protection
■ Outside casing made of stainless steel
■ Process observation window (Ø 35 mm) up to 1100 °C
■ Protective gas injection system ( Nitrogen or Argon )
■ Metal tray
■ Table for supporting the furnace
High Temp. Furnace LF.JM
High Temperature Muffle Furnaces.
Maximum Temperature 1400ºC – 1500ºC – 1600ºC.
Silicon Carbide Heating Elements.
■ High Quality 24/7 Continuous-Tº Muffle Furnaces
■ Max. Temperature: 1400º-1500ºC-1600ºC
■ Heating elements (SiC) Silicon carbide
■ Vertical parallel lift door
■ Refined design
■ Ceramic fiber insulation
■ Maximum operating temperature: 1400ºC – 1500ºC – 1600ºC
■ Rapid heating
■ Compact and lightweight
■ 24/7 continuous work capability
■ Heated by KANTHAL SiC
■ Low thermal mass insulation
■ Built with low density ceramic bricks and ceramic fiber
■ Double insulation includes air chamber
■ Outer case in painted metal sheet (inox optional)
■ Rear ventilation via ceramic chimney
■ Ceramic tray included
■ Thermocouple type S
■ Spare parts easily replaceable by end user
■ Solid state relay
■ General safety switch
■ General safety contactor
■ PAD Digital control : Microprocessor-based / PID parameters / Non-volatile memory / Alarm
■ Control options:
– 1 program / 8 segments programmer
– 4 program / 15 segments programmer
– Programmers up to 64 segments
– Data logger and programmer communication by Ethernet/ RS232
Safety Sut-off:
■ Turns off upon door opening
High Temperature Furnace XG
High Temperature Muffle Furnaces
■ Maximum Temperature 1600º-1700ºC-1800ºC-1900ºC
■ Vertical Doors
■ Molybdenum Discilice Heating Elements
Explore the High-Temperature Solutions by SCO Tech – the ultimate answer to your demanding heat-related applications. Our advanced high-temperature products are engineered with cutting-edge technology, ensuring exceptional performance and accuracy in extreme temperature environments.
■ Maximum operating temperature: 1400ºC – 1500ºC – 1600ºC
■ Rapid heating
■ Compact and lightweight
■ 24/7 continuous work capability
■ Heated by KANTHAL SiC
■ Low thermal mass insulation
■ Built with low density ceramic bricks and ceramic fiber
■ Double insulation includes air chamber
■ Outer case in painted metal sheet (inox optional)
■ Rear ventilation via ceramic chimney
■ Ceramic tray included
■ Thermocouple type S
■ Spare parts easily replaceable by end user
■ Solid state relay
■ General safety switch
■ General safety contactor
■ PAD Digital control : Microprocessor-based / PID parameters / Non-volatile memory / Alarm
■ Control options:
– 1 program / 8 segments programmer
– 4 program / 15 segments programmer
– Programmers up to 64 segments
– Data logger and programmer communication by Ethernet/ RS232
Safety Shut-off:
■ Turns off upon door opening
Shaft Furnaces
Fit with a selection of preceise digital contollers and certified heating elements to ensure excellent temperature stability.
The furnaces are excellent for drying , hardening, preliminary heating, loosing, normalising and other thermal process up to 900°C
Main application in scientific laboratories, educational institutions, medicine and industry.
■ Outside casing – metal sheet, powder painted grey
■ Door safety interlock switch
■ Non-programmable controller Omron E5CC
■ Fast heating time due to low thermal mass construction
■ Good stability and uniformity
■ Low power consumption
■ Buzzer
■ Calibration of temperature measurement system
■ Data communication/USB
■ Data recorder
■ Digital time
■ Over temperature protection
■ Table for supporting the furnace
Bridgman Furnace
1650C Bridgman Furnace for Directional
Solidification of Polycrystalline Ingots
BFCRY-1500 is a 1650C max. Bridgman furnace for directional solidification of Polycrystalline Ingots up to 37 mm diameter. Three individual controlled heating modules & speed adjustable cooling fans at furance exit provide advantages to create larger temp. gradient at the melt/crystal interface as needed. Automatic crucible retrieving system enables the most convenient way for sample loading/unloading. An optional crucible rotation stage can be added at additional cost for single crystal ingot growth.
Features:
■ Three stacked heating modules with independent temperature measurement and control enable
the flexibility of creating various temperature gradients along the length of the heated area
■ Two speed adjustable cooling fans with TC at the exit of the furnace allow the better control over
the temperature gradient at the melt/crystal interface
■ φ42mm Alumina sample pulling stage with TC attachment for accurate temperature monitoring of
the crucible on top and generate instant temperature plot
■ Electric elevated crucible stage enable an automatic and convenient sample loading / retrieving
Power Requirements 220VAC single phase, 50/60Hz, 9.5KW
Working Temperature Heating Element: Silicon molybdenum rod
Max. Working Temperature: 1650°C ( <1hr)
Continuous Operating Temperature: 1600°C
Processing Tube & Flange High purity alumina furnace tube, Size: φ80mm O.D. x 1000mm L
A pair of stainless steel flange is connected to both end of the processing
tube which allows for inert gas purging or vacuum during the crystal
growing proces
Sample Stage φ42X40mm H Alumina Sample Stage
B type thermocouple insert from the bottom of the sample stage for
accurate temperature measurement of the crucible
Crucible Retrieving
Mechanism
Automatic sample retrieving system for easy crucible loading /
unloading, 700mm max. travel distance
Heating Zones Three heating zones with independent temperature measurement and control
Three zones: 300mm (12″) long in total
100mm long for each zone
Temperature Control Three PID temp. controller with 30 programmable segments for precise
control of heating, cooling rate and dwell time.
Built-in overheating & broken thermocouple protection.
European Temperature controller, with +/- 0.1 ºC temperature accuracy.
Three B type thermocouples (one for each zone).
Cooling Fans One speed adjustable cooling fans are installed at the bottom exit of the furnace
Furnace Travel
Distance & Speed
As the furnace heater moves upward, the crucible is moving toward the
bottom exit of the furnace where the lower temperature is seen.
The maximum travel distance of the furnace heater is 200 mm.
Travel speed: 0.03-3 mm/hr
Vacuum Pump
(Not included)
10E-2 torr via dual stage mechanical vacuum pump
10E-5 torr via Turbo pump
The vacuum pump is optional.
Dimension Controller stage: 860mm L x 600mm W x 1220mm H
Furnace stage: 1170mm L X 910mm W X 2500mm H
Horizontal Tube Furnace
■ High Quality 24/7 Continuos-Tº Tube Furnaces
■ Temperature range up to 1800ºc
■ Sturdy Design • Brick Insulation (23/26) And Fiber Insulation (300-400)
■ Split / Closed Models
Features:
■ CE manufactured
■ Maximum operating temperature: 1150ºC – 1800ºC
■ 1,2,3 or 4 independent heating zones
■ Compact and lightweight
■ 24/7 continuous work capability
■ Heated by KANTHAL AF, SiC and MoSi2
■ Low thermal mass insulation
■ Built with low density ceramic bricks and ceramic fiber
■ Double insulation includes air chamber
■ A-304 stainless steel outer case
■ Thermocouple type K,S and B
■ Spare parts easily replaceable by end user.
Control:
■ Independent control box / under the furnace
■ Solid state relay
■ General safety switch
■ General safety contactor
■ PAD Digital control : Microprocessor-based / PID parameters / Non-volatile memory / Alarm
■ Control options:
– 1 program / 8 segments programmer
– 4 program / 15 segments programmer
– Programmers up to 64 segments
– Data logger and programmer communication by Ethernet/ RS232
Safety Shut-off:
■ Thermocouple break shut-off
■ Turns off upon door opening
Tube Furnaces
Tube furnaces are suitable for purifications and syntheses, Temperature range 1250 °C.
Fit with a selection of precise digital controllers and certified heating elements to ensure excellent temperature stability.
The furnaces are an magnificent for scientific laboratories, educational institutions, medicine and industry for thermal processing up to 1250 °C.
■ Outside casing – metal sheet, powder painted grey
■ Solid ceramic chamber or made of stainless steel
■ Door opens from the top
■ Ceramic bottom plate
■ Non-programmable controller Omron E5CC
■ Good stability and uniformity
■ Enclosed heating elements
■ Fast heating time due to low thermal mass construction
■ Low power consumption
■ Additional ceramic bottom plates
■ Buzzer
■ Calibration of temperature measurement system
■ Data communication/USB
■ Data recorder
■ Digital timer
■ Gas box up to 1100 °C
■ Over temperature protection
■ Process observation window (Ø 35 mm) up to 1100 °C
■ Protective gas injection system ( Nitrogen or Argon )
■ Metal tray
■ Table for supporting the furnace
Vertical Tube Furnaces
High Quality 24/7 Continuos-Tº Tube Furnaces
■ TR series up to 1150ºc
■ ST VC VO series up to 1800ºc
■ Sturdy Design
■ Brick Insulation (23/26)
■ Fiber Insulation (300-400)
■ CE manufactured
■ Maximum operating temperature: 1150ºC – 1800ºC
■ 1,2,3 or 4 independent heating zones
■ Compact and lightweight
■ 24/7 continuous work capability
■ Heated by KANTHAL AF, SiC and MoSi2
■ Low thermal mass insulation
■ Built with low density ceramic bricks and ceramic fiber
■ Double insulation includes air chamber
■ A-304 stainless steel outer case
■ Thermocouple type K,S and B
■ Spare parts easily replaceable by end user
Control:
■ Independent control box / under the furnace
■ Solid state relay
■ General safety switch
■ General safety contactor
■ PAD Digital control : Microprocessor-based / PID parameters / Non-volatile memory / Alarm
■ Control options:
– 1 program / 8 segments programmer
– 4 program / 15 segments programmer
– Programmers up to 64 segments
– Data logger and programmer communication by Ethernet/ RS232
Safety Shut-off:
■ Thermocouple break shut-off
■ Turns off upon door opening
Weighing Furnaces
This Muffle furnace designed for combustion loss determination (loss on ignition) with the assistance of added balances, which weigh the materials before, during, and after the process.
High accuracy electric muffle furnace designed for combustion loss determination (loss on ignition) with the assistance of added balances, which weigh the materials before, during, and after the process. This could also inform about the completion of the process – as soon as the weight ceases to decrease. To eliminate gases or smoke that are released during thermal processing, an exhaust system may be installed additionally. It is used with a variety of materials like, for example, sediment, sludge, soil, waste, or inorganic materials such as cement, lime, calcinated bauxite, and refractories, firing up to 1100°C. The furnace is an excellent fit for scientific laboratories, educational institutions, ceramic studios and is used in medicine and industry.
■ One piece, high thermal efficiency, vacuum-formed ceramic fiber chamber
■ Outside casing – metal sheet, powder painted grey
■ Door opens upwards
■ Door safety interlock switch
■ Non-programmable controller Omron E5CC
■ Heating elements, embedded in a vacuum formed fiber, are inside four walls of the chamber
■ Good stability and uniformity
■ Fast heating time due to low thermal mass construction
■ Low power consumption
■ Additional ceramic bottom plates
■ Additional ceramic hearth plates
■ Buzzer
■ Calibration of temperature measurement system
■ Data communication/USB
■ Data recorder
■ Digital timer
■ Fan-assisted chimney for air extraction
■ Gas box up to 1100 °C
■ Over temperature protection
■ Process observation window (Ø 35 mm) up to 1100 °C
■ Protective gas injection system ( Nitrogen or Argon )
■ Metal tray
■ Table for supporting the furnace
Sterilization
Vertical Autoclave
– Safety door opening mechanism assures user’s safety as the door remains locked as long as there is excess residual pressure in the chamber
– Automatic safety relief valve is installed for over pressure protection
– Excellent temperature uniformity and accuracy
– Stainless steel inner chamber with baskets
– Arm Handle type door lock for convenient operation & plastic cover door cover for safety
– Safety assurance with C.E conformity
AH – B1 Series Professional dental autoclave
Professional dental autoclave in high quality for an economic price.
This new designed SCO Tech dental autoclave has a opening water tank on the top. It strictly meet the standard of EN13060,which makes washing and cleaning much more convenient. The SCO Tech dental autoclave adopts the European B standard with 3-times pre-vacuum perceding cacuum drying. Whether solid or A-type hollow,whether with multi-apertures or inset pipes, it efficiently tidy air from every hollow area Vacuum measurement with up to -0.8bar. It sterilizes and sanitizes miscellaneous packed or unpacked medical instruments of any hollow instrument, such as hand-piece, making sure that water steam reaches every corner. SCO Tech dental autoclaves are all-round computerized and fuzzy controled. The digital display is a modularized panel for a easy operation. It is installed with BOWIC&DICK which measures the penetration of water steam. A mini printer can be attached to record the process of sterilization.
AH-16 Portable Autoclave
Compact bench top autoclave, haevy duty with enhanced safety and simple operation.
Multipurpose laboratory use at effective price.
The SCO Tech AH-16 is a haevy duty, compact bench top autoclave, with enhanced safety and simple operation. It is desgined for multipurpose laboratory. The SCO Tech portable autoclave is manufactured in conformity with the 93/42/EEC. It combines, reliability, safety and a easy operation for the maintenance. SCO Tech autoclaves are high efficiency for sterilization of wrapped/ unwrapped/ liquid/ utensils etc., in dentist, hospital, clinic and laboratory centers. It includes stainless steel sheathed heater for easy maintenance.
Versatile programs for selection:
a) Sterilization pressure is adjustable form 0.9 – 2.1 kg/cm² associated with 118 – 134°C
b) Preset sterilization time at 4 / 15 / 30 minutes depending upon sterilization substances.
The SCO Tech portable autoclave works with microprocessor controlled sterilization. It uses automatic control from heating-up – sterilization to time-off. The sterilization starts the timing only when temperature reaches the set point. Safety valve , emergency exhaust valve , release valve, Door safety holder and a switch of pressure control completes the functions of the SCO Tech AH-16.
| • Fill Water System: | Manually |
| • Temperature Display: | Pressure / temoperature Gauge |
| • Pressure Display: | Pressure / temoperature Gauge |
| • Progrom(Function) Display: | LED Display |
| • lndicalor Light: | Power, heat, sterilization, complete |
| • Program for Select1on: | Wrapped / Unwrapped / Liquid |
| Sterilization tims select 4, 15, 30 min | |
| • Starilization Temp.Selection | 118-134 °C (0,9-2,1 kg/cm²) |
| Specifications: | |
| Model | AH-16 |
| Product name: | (Class-N) Bench-top Type Autoclave |
| Overall Dimensions: | 501 x 406 x 537 mm( W x H x D ) |
| Construction: | Chamber & Door: Stainelss steel 304 |
| Gross weight | 33 Kg |
| Chamber Dimensions: | 230 x 410 mm( Ø x D ) |
| Chamber Capacity: | 16 Liters |
| Max. Sterilization range: | 134°C / 2,0 bar |
| Capacity of water tank: | 4200 cc |
| Wafer consumption | |
| per cycle: | 250 cc |
| Power Supply: | 230 V, 50-60 Hz |
| Power Consumptions: | 1400 W, 7 A |
| Certificate: | CE |
| Safety Device: | |
| • Pressure Salety Valve: | Setup to 2,6 kg/cm² |
| • Over-pressure Protection: | Via Pressure Protection Switch |
| • Over-heated Protection: | Yes |
| • Electric Over | |
| load Protection: | 10 A, No Fuse Breaker X 2 |
| • Door Salety holder: | N/A |
| • Pressure Door Auto-Lock: | optional |
| • Emergency exhaust valve: | Yes |
| Standard Accessoires: | 1x Sterilization Box: ( LxWxH ): 336 x 174 x 118 mm |
| 1x Heater cover / Material: Stainless Steel 304 |
AH-16p Compact bench top autoclave
Heavy duty with hight safety and simple operation. Multipurpose laboratory use at effective price.
Discover the AH-16P by SCO Tech – a cutting-edge solution for precise and efficient high-temperature applications. This advanced equipment is engineered with state-of-the-art technology, delivering accurate temperature control and uniform heat distribution. The AH-16P is designed to meet the demands of your laboratory or industrial processes, offering versatility and reliability. With its user-friendly interface and programmable settings, researchers can achieve exceptional results for a wide range of materials.
| Features: | |
| • Fill Water System: | Manually |
| • Temperature Display: | Pressure / temperature Gauge |
| • Pressure Display: | Pressure / temperature Gauge |
| • Program (Function) Display: | LED Display |
| • Indicator Light: | Power, heat, sterilization, complete |
| • Program for Selection: | Sterilization time select 8, 33 min |
| • Sterilization Temp. Selection | 122 °C (1,4 kg/cm²) |
| • Dry Function | N/A |
| Specifications: | |
| Model | AH-16p |
| Product name: | (Class-N) Bench-top Type Autoclave |
| Overall Dimensions: | 335 X 430 x 600 mm (W x H x D) |
| Construction: | Chamber & Door: Stainless steel 304 |
| Gross weight | 15,5 kg |
| Chamber Dimensions: | 230 x 410 mm( Ø x D ) |
| Chamber Capacity: | 16 Liters |
| Max. Sterilization range: | 134°C / 2,0 bar |
| Capacity of water tank: | N/A |
| Wafer consumption per cycle: | 250 cc |
| Power Supply: | 230 V, 50-60 Hz |
| Power Consumption: | 1400 W, 7 A |
| Certificate: | CE |
| Safety Device: | |
| Pressure Safety Valve: | Setup to 1,7 kg/cm² |
| Over-pressure Protection: | Via Pressure Protection Switch |
| Over-heated Protection: | Yes |
| Electric Over load Protection: | 10 A, No Fuse Breaker X 2 |
| Door Safety holder: | Yes |
| Pressure Door Auto-Lock: | N/A |
| Emergency exhaust valve: | Yes |
| Standard Accessories: | 1x Sterilization Box: ( LxWxH ): 336 x 174 x 118 mm |
| 1x Heater cover / Material: Stainless Steel 304 |
| Optional Accessories | 1x Tray set : ( 3x Tray, 1x Tray frame, 1x Holder ) |
| 2x Spring Holder (Pouch Rack ) Material: Stainless Steel 304 |
Plasma Sterilization - STER-E 100
H2O2 Low Temperature Sterilizer with 105 l useable volume
■ Four preset cycles:
Short Cycle: for instruments with simple surfaces
Standard Cycle: for instruments with lumens
Endo Cycle: for max. 2 pcs of flexible endoscopes
Drying Cycle: for drying of pre-dried lumens
■ H2O2 concentration detection (optional)
■ Build-in biological incubator
■ Higher chamber humidity resistance, less cycle cancellations
■ Soft heating technology for even-distributed chamber temperature
■ Upgraded vacuum technology for better protection of instruments
■ Noise ≤55dB
■ Superior material: Aviation aluminum 5052 (T=16mm), Panel (T=6061, T=20mm)
■ Standard retractable loading shelves
■ Standard foot door switch for opening/closing chamber door
■ Standard build-in biological incubator
■ Display: 10 inch TFT touch screen
■ Capable to connect various HIS system, CSSD tracking system
Plasma Sterilization - STER-E 150
H2O2 Low Temperature Sterilizer with 105 l useable volume
■ Four preset cycles:
Short Cycle: for instruments with simple surfaces
Standard Cycle: for instruments with lumens
Endo Cycle: for max. 2 pcs of flexible endoscopes
Drying Cycle: for drying of pre-dried lumens
■ H2O2 concentration detection (optional)
■ Build-in biological incubator
■ Higher chamber humidity resistance, less cycle cancellations
■ Soft heating technology for even-distributed chamber temperature
■ Upgraded vacuum technology for better protection of instruments
■ Noise ≤55dB
■ Superior material: Aviation aluminum 5052 (T=16mm), Panel (T=6061, T=20mm)
■ Standard retractable loading shelves
■ Standard foot door switch for opening/closing chamber door
■ Standard build-in biological incubator
■ Display: 10 inch TFT touch screen
■ Capable to connect various HIS system, CSSD tracking system
Plasma Sterilization - STER-E 50
Bench top Plasma Sterilizer with Usable volume of 28 l.
■ Bench Top version
■ 7″ TFT touch screen
■ Hydrogen peroxide cassette
■ Built-in thermal mini printer
■ Build-in Memory for more than 20.000 cycle data
■ Efficient cycle time ( short: 21 min, Standard: 35 min )
■ Aeration and draining not required, By product are just water & oxygen
| Working Temperature: | 45 – 55 °C |
| Cycle time: | Short Cycle: 21 min.
Standard Cycle: 35 min. |
| Chamber Volume: | 39 L |
| Usable volume: | 28 L |
| Shelves: | 2 retractableshelves, 5Kg/shelf |
| Cassette: | for 12 capsules |
| Consumption: | Short Cycle: 1 capsule |
| Standard Cycle: 2 capsules | |
| Power supply: | AC 3 phase 380V-415V 50Hz / 220V 60Hz,3.6KVA |
| Dimensions: | 72 x 99 x 81 cm / 215 kg |
| Certification: | CE marked. |
Floor Standing Sterilizer - SAP – 600
CHAMBER SIZE: 610mm (DIA.) ~ 1200mm (DEP.), APPROX. 350L.
Discover the Floor Standing Sterilizer – a high-performance Horizontal Type Automatic Autoclave. With a large chamber size of 610mm (DIA.) x 1200mm (DEP.), approximately 350L capacity, it accommodates diverse materials. Enjoy auto features like water addition, low water indicator, and adjustable pressure settings (0.9 – 2.1 cm²). Standard accessories include one tray and two water viewing tubes. Trust in SCO Tech’s expertise for efficient and reliable sterilization in your lab.
| Order Information:
| |
| SAP – 600 | HORIZONTAL TYPE AUTOMATIC AUTOCLAVE STERILIZER |
| SAP – 600K | SAP]600 WITH PRESSURE DOOR AUTO]LOCK DEVICE |
| SAP – 600W | SAP]600 WITH ADD WATER PUMP |
| SAP – 600V | SAP]600 WITH DRY VACUUM PUMP |
| SAP – 600X | SAP]600 WITH 1]POINT SENSOR RECORDER |
| SAP – 600Y | SAP]600 WITH 6]POINT SENSOR RECORDER |
| SAP – 600T | SAP]600 WITH DIGITAL DISPLAYED TEMPERATURE CONTROLLER |
| SAP – 600D | SAP]600 WITH DOUBLE DOOR DEVICE |
Optional Accessory:
A. TROLLEY WITH LOADING PLATE (RAIL INCLUDED
B. BASKET × 3 (RAIL INCLUDED)
C. PLATE SET (PLATE × 2 + PLATE FRAME × 1)
Bacti-Cinerator / Loop Sterilizer
Bacti-cinerator / loop sterilizer based on infrared radiation, which easy and simple to use, convenient handle, no flame, no afraid wind and safe. it is widely used in biosafety cabinet, Cleaning bench, exhaust fan, movable cars etc environmental to do microbiology analysis.
Features:
.
■ Safety, easy to use, suitable for small tools like needle pincette etc,
■ Short sterilization time 5 – 7 seconds
■ Sterilization tube temperature up to 825 °C,
■ IR heating source Light weight, space safe, easy to clean. Long life time.
■ Could be used in anaerobic room and prevent cross contamination.
| BC-3000 | BC-3001 | |
| . | ||
| Power supply | 220V, 50 / 60Hz | 220V, 50 / 60Hz |
| Power | 170W | 195W |
| Max. temperature | 825°C ± 50°C ( at core ) | 825°C ± 50°C ( at core ) |
| Max. item Ø | 14mm | 35mm |
| Length of heating area | 150mm | 100mm |
| Heating time | 20min | 20min |
| Fuse | 250V 3A 5×20 | 250V 3A 5×20 |
| Ambient temperature | 5°C to 40°C | 5°C to 40°C |
| Dimensions | 100 x 185 x 180mm (W X D X H) | 162 x 98 x 192mm (W X D X H) |
| Net Weight | 1.1kg | 1.4kg |
Glass Bead Sterilizer - BC – 3002 / 3003
Glass beads sterilizer could rapidly sterilize all kinds of small laboratory equipments. It uses high temperature glass beads for the sterilization. compact appearance, can be placed in clean workbench. Only need 10 seconds, it could sterilize metal or glass material tools. Inside glass beads could be heated to 250 centigrade, effectively eliminate the bacteria and spores. Can be used in the forceps, scissors, tweezers, scalpel,needles, inoculating loop and inoculating needle etc. It is more widely used in the laboratory and research institutes.
Features:
■ Stainless steel container, high performance heating parts,
■ High accurate temperature controller and supper protection.
■ Inside container could bear 250 centigrade.
■ Small size, light weight, easy use, long lifetime.
| Model | BC-3002 | BC-3003 |
| . | ||
| Max. Temperature | 250°C | 250°C |
| Time heating | ca 10 min | ca 15 min |
| Sterilzation chamber | 40 x 80 mm ( Ø x D ) | 40 x 140 mm ( Ø x D ) |
| Power Consumption | 50W | 60W |
| Weight | 40 g | 150 g |
| Metal cover | Stainless Steel | Stainless Steel |
| Insulation material | Environmental mineral wool | Environmental mineral wool |
| Power | AC 220V, 50/60 Hz | AC 220V, 50/60 H |
Centrifuge
Clinical Centrifuge - C-412
The Clinical Centrifuge is ideal for the separation of serum, plasma, urea, blood samples and other routine applications in hospital and research laboratories.
The SCO Tech clinical centrifuges are optimized for use in clinical settings, such as hospitals, physicians’ offices and research laboratories, for processing blood and other clinical samples at lower speeds. Available in a variety of capacities and speed ranges, SCO Tech centrifuges are designed to meet the needs of clinical applications.
SCO Tech benchtop centrifuges are small and can be installed on the lab bench. They are robust, durable and have a high capacity. They are the standard equipment in clinical biology laboratories. Some models can be cooled for centrifugation of sensitive substances.
Advantages:
The C-412 satisfies the international safety standards and rules as well as the explosion-proof and bio-safe tests and other requirements for In-Vitro diagnostic equipments (IVD) . It is CE, TÜV certified and includes a high strength plastic rotor and excellent balance technology to guarantee a quiet and stable operation. The dual protection casing provides a safe and reliable running of the SCO Tech centrifuge. It got a brushless DC motor drive quickly and effortlessly accelerates the rotor to set the speed. This control is completed via CPU controls for speed and time with high accuracy for the centrifuge speed. The time adjustment from 30 seconds to 99 minutes or continuous running underlines the SCO Tech functions. Gentle braking at low speeds with efficient separation is also guaranteed. The ergonomic design, the user-friendly with large LCD display that show all parameters for time, rpm or G-force is made for your clarity. The parameters can also be modified after the set speed is reached. Quick spins are possible by pressing and holding PULSE key of the SCO Tech centrifuge. The centrifuge speed can be accelerated and held at the target speed. The automatic release the lid when operation has stopped to save processing time. It gots a easy-to-read processing display and a sound alert.
| Speed | 300-4500 rpm |
| Speed increment | 100 rpm |
| Max. RCF | 2490 × g, step: 100xg |
| Speed accuracy | ± 20 rpm |
| Capacity | 8 x 15ml, 12 x 10ml/7ml/5ml |
| Time Adjustment | Timer 30 sec to 99 min – HOLD – or |
| Continuous Operation | |
| Display | LCD |
| Drive | DC Brushless motor |
| Noise level | ≤ 56 dB |
| Power | AC 220 ~ 240V / 50-60Hz / 1 ph / 3A |
Hematocrit Centrifuge - CHM-24
The SCO Tech Hematocrit Centrifuge allows your lab to determine erythrocyte fractions in blood as well as micro solution separations.
Hematocrit centrifuges are very commonly used when diagnosing blood loss, polycythemia (an increase in the red cell count above normal), anemia, bone marrow failure, leukemia, and multiple myeloma.
For this, the SCO Tech hematocrit centrifuge provides hematocrit (HCT) values for tests in biochemistry, immunity, genetics, blood separation and for general other clinical tests.
SCO Tech benchtop centrifuge is small and can be installed on the lab bench. They are robust, durable and have a high capacity. They are the standard equipment in clinical biology laboratories.
THE CHM-24 Hematocrit Centrifuge is used for determination of volume fractions of erythrocytes in blood and also for separation of micro blood and solutions with precise control speed and time. The speed range from 200 to14000r rpm max, with RCF 18260×g for capacity of 24 capillary tubes or 2ml tubes suitable for extraction of DNA and RNA, completes the SCO Tech centrifuge.
Advantages:
The CHM- 24 satisfies the international safety standards and rules as well as the explosion-proof and bio-safe tests and other requirements for In-Vitro diagnostic equipments (IVD).
It is CE, TÜV certified.
High strength plastic rotor and excellent balance technology to guarantee a quiet and stable operation.
Dual protection casing provides safe and reliable running.
Brushless DC motor drive quickly and effortlessly accelerates the rotor to set speed.
Precise control via CPU controls for speed and time with high accuracy for speed. Time adjustment from 30 seconds to 99 minutes or continuous running.
Gentle braking at low speeds with efficient separation.
Ergonomic design, User-friendly with large LCD display show all parameters for time, rpm or G-force.
Parameters can be modified after the set speed is reached.
Quick spins are possible by pressing and holding PULSE key. The centrifuge speed can be accelerated and held at the target speed.
Automatic release the lid when operation has stopped to save processing time.
Easy-to-read processing display and sound alert.
Specifications:
| Speed Range | 200 to 14000 rpm, |
| Speed Resolution | 10 rpm |
| Max RCF | 18260 xg |
| Accuracy of speed | ± 30 rpm |
| Maximum capacity | 24 x hematocrit tubes ( 12.000 rpm ) |
| 24 x 1.5/2.0ml tubes (14.000 rpm ) | |
| Time Adjustment | Timer 30 sec to 99 min , HOLD. or |
| Continuous Operation | |
| Display | LCD |
| Drive | DC-Motor, brushless |
| Safety Features | Double door lock, |
| over temperature protection, | |
| over speed protection condition | |
| diagnosis system, | |
| rotor recognition | |
| Power | AC 220 ~ 240V / 50-60Hz / 1 ph / 5A |
| Noise level | ≤60 dB |
| Dimensions | (L）280×（W）364×（H）266 mm |
| Weight | 10 kg |
Micro Centrifuge - CM-mikro
The SCO Tech CM-mikro and CM-mikro R are small, compact bench-top centrifuges with 15.000 rpm, Complete with R24-2 rotor 24 tubes 2ml, 100-240V / 50-60Hz.
The SCO Tech CM-mikro and CM-mikro R are small, compact bench-top centrifuges for processing microlitre tubes of 0.2 ml to 2.0 ml.
This centrifuges are used for routine laboratory examination in the fields of genetic research, virology, cytology and bacteriology.
The capacity, cooling and performance of the CM-mikro are optimized to meet the demands of PCR examinations.
Rapid run-up and run-down times make the centrifuge process significantly without stirring the sediment during deceleration.
Features:
User-friendly large LCD display provides all visual informatlon
Quiet and stable operation benefit Iab environment
Brushless motor drives quickly and effortlessly accelerates the rotor to set speed
Fully autoclavable Bio-safe rotor
Dual door intertock design, more safe
The refrigerated model equipped with powerful cooling system guarantee under 4°C at max. speed
Unique temperature display to protect sensitive samples
Gently braking at low speed, better separation
Mini Centrifuge - C-mini
C-mini Centrifuges performance max. speed of 7000rpm. Ideal for quick spin downs of
micro-tubes and PCR tubes, available in four colours green, blue, yellow and pink.
Centrifuges performance max. speed of 7000rpm, 8 x 2ml/1.5ml, Ideal for quick spin downs of microtubes and PCR tubes, available in four colours green, blue, yellow and pink. including two rotors of R8-2 & R2-PCR8.
Features:
Supplied with an 8 place 1.5/2.0ml microtube rotor and PCR rotor.
Compact design.
Whisper quiet operation.
Simply close the lid for acceleration and close the lid for deceleration, or use the on/off switch.
Dual door interlock design, for safety.
Multi voltage operation with stable running and high accuracy of speed.
DC motor drive.
Quiet running, noise level <45 dB.
The rotor is seated on a tapered shaft which facilitates easy removal.
Ideal for quick spin downs and micro filtration.
Accelerates and brakes in seconds.
The centrifuge starts and stops by closing and opening lid or using the on/off switch.
Precise control of speed and run time with efficient separation.
| Specifications:
|
|
| Maximum Speed | 7000rpm |
| Maximum RCF | 2680 xg |
| Capacity | 8 x 1.5/2.0ml microtubes |
| (8 x 0.5/0.2ml tubes using optional adapters) | |
| Run Time | 30 seconds to 99 minutes or continuous operation |
| Dimensions | 150×150×117 mm |
| Weight | 0.5 kg |
| Power | 100-240VAC, 50/60 Hz |
Mini Centrifuge - CM-mini
Compact, light weight and powerful centrifuge for small sample volumes, complete with rotor 12x
2.0/1.5 ml. It is widely used in physical and chemistry analysis, biochemistry, cellular and molecular
biology, clinical Labs and blood donation centers, and is ideal for high-end research applications:
Sedimentation of cells and viruses Separation of sub-cellular organelles
Isolation of macromolecules such as DNA, RNA, proteins or lipids
High Speed Mini Centrifuge, max speed 15.000 rpm, Complete with R12-2 aluminum ( or plastic ) rotor 12 tubes x 2ml, , 100-240V / 50-60Hz.
Features:
- Powerful centrifugal force 15100 g, wide range of application
- Cast iron chassis with low gravity, provides stable and reliable running at maximum speed, low noise
- User-friendly with large LCD display
- Brushless motor drives quickly and effortlessly accelerates the rotor to set speed
- Unique cooling design, minimizes rotor heating
- Fully autoclavable high strength aluminum alloy rotor
- Compact design, save valuable space
- Conform to international safety standards and regulations
| Specifications:
| |
| Max Speed | 15.000 rpm (500-15000 rpm), increment: 100 rpm |
| Max RCF | 15100 xg, increment: 100 xg |
| Rotor | 12 x 2ml |
| Run Time | 30sec 99 min. – HOLD (Continuous Operation) |
| Driving Motor | Brushless DC motor |
| Safety Device | Door interlock. Over-speed detector |
| Over-Temperature detector; | |
| Automatic internal diagnosis | |
| Power Supply | AC 110-220V / 50-60Hz / 1 ph / 3 A |
| Noise | 58dB or ≤ 54 dB [ CM-mini plus ] |
| Dimension (LxDxH) | 255 x 245 x 140 mm |
| Weight | 6 kg |
Mixing, Shaking, Stirring, Dispersing, Homogenizing
Digital Tube Roller
The SCO Tech tube roller provides a gentle but highly efficient rocking and rolling motions, ideal for mixing blood samples, viscous substances and liquid-solid suspensions.
It is used in a variety applications, prevention of blood coagulation and immune precipitation etc.. The precise driven control keeps everything easy. Easy to operate and high safety.
There are two types of SCO Tech tube roller:
1) STR-1 Tube Roller
2) STR-1d Digital Tube Roller
The SCO Tech STR-1 Tube Roller:
Rocking and rolling motions for complete mixing
Speed range of 0-70rpm
Six roller design with small footprint and easy clean
DC brushless motor provides reliable and quiet running, maintenance free
Designed for continuous operation
Can be used in cold rooms or in incubators
The SCO Tech STR-1d Digital Tube Roller:
Rocking and rolling motions for complete mixing
Speed range of 10-70rpm
Six roller design with small footprint and easy clean
DC brushless motor provides reliable and quiet running, maintenance free
Designed for continuous or timed operation
Digital speed control and LCD displays, speed and timer can be viewed
simultaneously
With a drip tray to collect accidental spillages
Can be used in cold rooms or in incubators
| Specifications: | ||
| Model | STR -1d | STR-1 |
| Voltage : | VAC 100-240 V | |
| Frequency : | 50/60 Hz | |
| Power : | 30 W | 25 W |
| Motor type: | DC brushless motor | |
| Rocking motion: | Rocking & rolling | |
| Amplitude: | 24 mm | |
| Max. load capacity | 5.0 Kg | 4.0 Kg |
| Nunmber of rolls: | 6 | |
| Roller size: | 340 mm (L) | 280 mm (L) |
| Speed range : | 0 – 70 rpm | |
| Speed display: | LCD | scale |
| Timer: | Yes | — |
| Timer display: | LCD | — |
| Time setting range : | 1 – 1199 min | — |
| Run Type | Time / Continuous Operation | Continuous |
| Overall dimensions : | 530×260×120 mm | 450×260×120 mm |
| Weight : | 5.1 kg | 4,5 kg |
| Permissible ambient temp.: | 5－40 °C | |
| Permissible rH: | 80% | |
| Protection class: | IP21 acc. to DIN EN60529 | |
| Interface: | RS232 |
Digital Tube Roller - STR Series
The SCO Tech rotators give gentle but effective mixing of biological samples to be held in 1.5ml to 50ml micro tubes, used in a variety of applications including immune precipitations, prevention of blood coagulation, latex diagnostics etc. The LCD Digital display allow an accurate speed and running time. Easy to operate and high safety.
The SCO Tech STR Serie rotators have the following advantages:
The SCO Tech rotator comes with a disk type design Type STR-2D or with a rotisserie type design STR-3D
Digital control for speed and operation time via LCD Display
End-over-end or rolling action, gives gentle but effective mixing
Adjustable speed range of 10 to 70rpm for timed or continuous operation
Adjustable mixing angle between 0 and 90°
Used with a wide variety of accessories
Digital Tube Rotator with Disk / Rotisserie accessories, LCD display, variable speed, adjustable mixing angle, 220V, 50/60Hz, 40W.
| Specifications: | |
| Tilt angel | 0 – 9° |
| Speed range | 0 – 70 rpm |
| Speed display | LCD |
| Timer | Yes |
| Timer display | LCD |
| Time setting range | 1 – 1199 min |
| Run Type | Time / Continuous Operation |
| Voltage | 100-240 V |
| Frequency | 50/60 Hz |
| Power | 40 W |
| Motor type | DC brushless motor |
| Overall dimensions | (D×W×H) 510 × 190 × 260 mm |
| Weight | 8.0 kg |
| Permissible ambient temp. | 5－40 °C |
| Permissible rH | 80% |
| Protection class | IP21 acc. to DIN EN60529 |
| Interface | RS232 |
| Approval | CE |
Microplate Shaker - SMP-1
Microplate Mixer with Microplate clamp SMP-1.1, 110/220V 50/60Hz.
Compact, flat microplate shaker with accurate motion and electronic speed control. The SCO Tech microplate shaker is suitable for one or two microplates and the universal round top plate accept different tubes adapters. It combines multi-purpose applicationin life science field including microbiology, cell and molecular biology, immunology and biotechnology.
Advantages of the SCO Tech SMP-1:
The SCO Tech Microplate Shaker is compact and flat with an accurate motion speed control.
Electronic speed control.
Suitable for one or two microplates, and universal round top plate accept different tubes adapters.
Multi-purpose applicationin life science field including microbiology, cell and molecular biology, immunology and biotechnology.
| Specifications:
| |
| Shaking type | Orbital |
| Orbital diameter | 4.5 mm |
| Max. shaking weight | 0.5 Kg (with attachments) |
| Speed range | 0 – 1500 rpm ( single microplate ) |
| 0 – 1000 rpm ( double microplate ) | |
| Speed display | Scale |
| Motor type | DC brushless motor |
| Motor rating input | 18 W |
| Motor rating output | 10 W |
| Voltage | 100-240 V, 50/60 Hz |
| Power | 20 W |
| Overall dimensions | (DxWxH) 260 × 150 × 80 mm |
| Weight | 3 kg |
| Ambient temperature: | 5－40 °C |
| Permissible rH: | 80% |
| Protection class: | IP21 acc. to DIN EN60529 |
Platform shakers - Linear shaker
Digital linear shaker with Universal attachment, 110/220V 50/60Hz.
The SCO Tech platform shaker is a heavey duty compact, flat orbital / Linear shaker with accurate motion. The speed and time control is shown via a digital display. It is micro-processor driven controled with an extra overload control. A big variety of accessories can be choosed for the SCO Tech platform shaker to allow the user requirement. It is easy to operate and high safety.
Advantages of the SCO Tech Platform Shaker:
Compact, flat orbital / Linear shaker with an ideal swivel motion
Digital display for speed and time
Electrical adjustment of speeds
Time setting: 1 – 1199 min or continuous operation
With constant torque through micro-processor-driven control
Drive secured against overload
Intrinsically safe by permanent supervision of all electric components
Universal attachment (accessory) allows to use almost all shapes and sizes of vessels
An RS 232 interface makes it possible to control and document all functions with a PC
| Specifications:
| |
| Shaking typ | Linear |
| Max. shaking weight | SHH-1 2.5 kg (with attachment) |
| SHH-2 7.5 kg (with attachment) | |
| Speed range | 100 – 350 rpm |
| Speed display | LCD |
| Time setting range | 1 – 1199 min |
| Timer display | LCD |
| Run type | Timed / Continuous operation |
| Motor type | DC brushless motor |
| Voltage | 100-240 V, 50/60 Hz |
| Overall dimensions | (DxWxH) 340 × 30 0× 100 mm |
| Permissible ambient temperature | 5－40 °C |
| Permissible rH | 80% |
| Protection class | IP21 |
| Interface | RS232 |
| Approval | CE |
Platform shakers - Orbital shaker
Digital orbital shaker with Universal attachment, 110/220V 50/60Hz.
The SCO Tech platform shaker is a heavey duty compact, flat orbital / Linear shaker with accurate motion. The speed and time control is shown via a digital display. It is micro-processor driven controled with an extra overload control. A big variety of accessories can be choosed for the SCO Tech platform shaker to allow the user requirement. It is easy to operate and high safety.
Advantages of the SCO Tech Platform Shaker:
Compact, flat orbital / Linear shaker with an ideal swivel motion
Digital display for speed and time
Electrical adjustment of speeds
Time setting: 1 – 1199 min or continuous operation
With constant torque through micro-processor-driven control
Drive secured against overload
Intrinsically safe by permanent supervision of all electric components
Universal attachment (accessory) allows to use almost all shapes and sizes of vessels
An RS 232 interface makes it possible to control and document all functions with a PC
| Specifications:
| ||
| Model | SHO-1 | SHO-2 |
| Shaking type | Orbital | |
| Max. shaking weight* | 2.5 kg | 7.5 kg |
| Speed range | 100 – 800 rpm | 100 – 500 rpm |
| Orbital diameter | 4 mm | 10 mm |
| Speed display | LCD | |
| Time setting range | 1 – 1199 min | |
| Timer display | LCD | |
| Run type | Timed / Continuous operation | |
| Motor type | DC brushless motor | |
| Voltage | 100-240 V, 50/60 Hz | |
| Overall dimensions (DxWxH) | 340 × 30 0× 100 mm | |
| Permissible ambient temperature | 5－40 °C | |
| Permissible rH | 0,8 | |
| Protection class | IP21 | |
| Interface | RS232 | |
| Approval | CE | |
Rocking shakers
Digital rocking/3D shaker with Universal attachment 110/220V 50/60Hz.
Experience the precision and efficiency of our Rocking Shakers at SCO Tech – the ultimate solution for your laboratory’s mixing and shaking needs. Our cutting-edge rocking shakers are designed with state-of-the-art technology, ensuring reliable and consistent mixing performance. With customizable settings and user-friendly controls, you can achieve precise and repeatable results for a wide range of applications. Trust in SCO Tech’s expertise and commitment to excellence to elevate your lab’s mixing capabilities.
| Specifications:
| ||
| Model | SHR -1 | SR-3D |
| Shaking type | See-saw rocking | 3D-Orbital |
| Tile Angel | ±9° | |
| Max. shaking weight | 10 kg | 5 kg |
| Speed range | 0 – 70 rpm | |
| Orbital diameter | 4 mm | 10 mm |
| Speed display | LCD | |
| Time setting range | 1 – 1199 min | |
| Timer display | LCD | |
| Run type | Timed / Continuous operation | |
| Motor type | DC brushless motor | |
| Voltage | 100-240 V, 50/60 Hz | |
| Power | 40W | 5 W |
| Overall dimensions (DxWxH) | 410 × 360 × 200 mm | 430 × 360 × 106 mm |
| Weight | 9.0 kg | |
| Ambient temperature | 5－40 °C | |
| Permissible rH | 0,8 | |
| Protection class | IP21 | |
| Interface | RS232 | |
| Approval | CE | |
Test tube shaker / Vortex Mixer
The SCO Tech test tube shaker is an universal shaker for test tubes and small vessels for continuous operation or automatic mode of operation by pressure on the top attachment.
A big selection of attachments allows for an extensive range of applications. Variable of fixed speed adjustment. It is widely used in life science, physical and chemical analysis fields, for vigorous re-suspension of cells or chemical pellets in tubes up to 15ml.
Advantages of the SCO Tech STT Serie:
Heavy duty vortex mixers suitable for touch or continuous operation
Wide speed range: 0-2500 rpm/min, step less adjustable or fixed speed.
Various shaking applications with optional adapters for up to 48 tubes.
Adapters securely clicked onto appliance in any position
Specially designed vacuum suction feet hold to the work surface and prevent the unit from movement
Aluminium cast base avoids unnecessary “walking”
| Specifications:
| ||||
| Model | STT-50v | STT-50f | STT-60v | STT-60f |
| Voltage | 110-120/220-230 [VAC] | |||
| Frequency | 50 Hz | 60 Hz | ||
| Power | 60 W | |||
| Shaking movement | orbital | |||
| Orbital diameter | 4 mm | |||
| Power input of motor | 58 W | |||
| Power output of motor | 10 W | |||
| Permissible on time | 0,3 | |||
| Speed range | 0 – 2500 rpm | 0 – 2500 rpm | ||
| Speed display | Scale | fixed | Scale | fixed |
| Run type | Continuous / touch operation | |||
| Dimensions | 127 x 130 x 160 mm (W×H×D) | |||
| Weight | 3,5 kg | |||
| Ambient temperature | 5 ~ 40 °C | |||
| Permissible rH | 0,8 | |||
| Protection class | IP21 (acc. to DIN EN60529) | |||
Magnetic Stirrer Accessories
The SCO Tech Magnetic stirrer is suitable for routine laboratory operation with new stirring technology. Heavy duty instrument and easy operation. Available as a classic version or high advanced PC controlled. Wide range of selection to meet your requirement. With or without heating, Stainless steel or ceramic plate
surface. LCD, LED or analogue display
Magnetic stirrer - SMH Series
Magnetic stirrer’s are suitable for routine laboratory operation with new stirring technology.
The SCO Tech Magnetic stirrer’s are suitable for routine laboratory operation with new stirring technology.
They are heavy duty instruments and they got an easy operation system. SCO Tech stirrer are available as classic versions or high advanced PC controlled versions. The wide range of possible selections will meet your requirement. With or without heating, the stainless steel or ceramic plate surface will help you in your daily work. SMH stirrers can be with LCD, LED or analogue display.
Advantages of the SCO Tech SMH:
Heavy duty instrument and easy operation.
Available as a classic version or high advanced PC controlled.
Wide range of selection to meet your requirement.
Wihh or without heating, Stainless steel or ceramic plate surface.
LCD, LED or analogue display.
Specifications: | |
| Dimension of plate | Ø 135 mm |
| Work plate material | Stainless steel / or ceramic |
| Max. stirring quantity | 20 L (H2O) |
| Max. magnetic bar | 80 mm |
| Motor type | DC brushless motor |
| Motor rating input | 18 W |
| Motor rating output | 10 W |
| Speed range | 0 – 1500 rpm |
| Speed display | Scale / or LCD |
| Heating power | 500 W |
| Heating rate | (1L water) 6 K/min |
| Temperature range | RT – 340°C |
| Temperature display | Analog scale / or LCD |
| Temperature display accuracy | 0.1 °C |
| Dimensions | 280 x 160 x 85 mm |
| Weight | 2,8 kg |
| Permissible ambient T. | 5 – 40 °C |
| Permissible rH | 0,8 |
| Protection class | IP42 ( acc. to DIN EN60529 ) |
| Frequency | 50 / 60 Hz |
| Power | 530 W |
| Voltage | VAC 100-120/200-240 V |
Magnetic stirrer - SMH-10
Magnetic stirrer 10-Channel Analog Hpt plate Magnetic Stirrer stainless steel plate, 220V – 50/60Hz.
The SCO Tech Magnetic stirrer’s are suitable for routine laboratory operation with new stirring technology.
The SCO Tech Magnetic stirrer’s are suitable for routine laboratory operation with new stirring technology.
They are heavy duty instruments and they got an easy operation system. SCO Tech stirrer are available as classic versions or high advanced PC controlled versions. The wide range of possible selections will meet your requirement. With or without heating, the stainless steel or ceramic plate surface will help you in your daily work. SMH stirrers can be with LCD, LED or analogue display.
Specifications:
| |
| Dimension of plate | 180×450 mm |
| Work plate material | Stainless steel with silicon film |
| Motor type | DC brushless motor |
| Motor rating input | 12 W |
| Motor rating output | 4 W |
| Power | 490 W |
| Voltage | 200-240 V |
| Frequency | 50/60 |
| Stirring positions | 10 |
| Max. stirring quantity | 0,4 L [H2O] each position |
| Max. magnetic bar | 40 mm (L x Ø) |
| Speed range | 100-1100 rpm |
| Speed display | Scale |
| Heating power | 470 W |
| Temperature range | RT – 120°C increment 1 |
| Safety temperature | 140 °C |
| Temperature display | Scale |
| Temperature sensor | N/A |
| Heating warning | N/A |
| Remote control | N/A |
| Protection class | IP42 according to DIN EN60529 |
| Dimensions | (W x D x H) 180 x 552 x 65 mm |
| Weight | 3,2 kg |
| Perm. ambient Temp | 5 – 40 °C |
| Permissible rH | 0,8 |
Digital Hotplate Magnetic Stirrer - SMH-184 Series
Digital Hotplate Magnetic Stirrer working surface 184x184mm glass ceramic, 220V – 50/60Hz.
The SCO Tech Magnetic stirrer’s are suitable for routine laboratory operation with new stirring technology.
They are heavy duty instruments and they got an easy operation system. SCO Tech stirrer are available as classic versions or high advanced PC controlled versions. The wide range of possible selections will meet your requirement. With or without heating, the stainless steel or ceramic plate surface will help you in your daily work. SMH stirrers can be with LCD, LED or analogue display.
Specifications:
| |
| Dimension of plate | 184×184 mm (7 inch) |
| Work plate material | Glass ceramic |
| Motor type | DC brushless motor |
| Motor rating input | 18 W |
| Motor rating output | 10 W |
| Power | 1050 W |
| Voltage | 100-120/200-240 V |
| Frequency | 50/60 |
| Max. stirring quantity | 20 L [H2O] |
| Max. magnetic bar | 80 mm (L x Ø) |
| Speed range | 100-1500 rpm |
| Speed display | LCD / LED |
| Speed display resolution | ±1 rpm |
| Heating power | 1000 W |
| Temperature range | RT – 550°C increment 1 |
| Control accuracy of work plate | ±1(100 °C) |
| Safety temperature | 580 °C |
| Temperature display | LCD |
| Temp. display accuracy | ±0.1 °C |
| Temperature sensor | PT1000 External |
| Control accuracy | ±0.2 °C ( with external temperature sensor PT1000 ) |
| Heating warning | 50 °C |
| Remote control | Yes (RS232 interface) |
| Protection class | IP21 according to DIN EN60529 |
| Dimensions | (W x D x H) 215 x 360 x 112 mm |
| Weight | 5,3 kg |
| Perm. ambient Temp | 5 – 40 °C |
| Permissible rH | 0,8 |
Double LED Digital Hotplate Magnetic Stirrer - SMH-L Series
Double LED Digital Hotplate Magnetic Stirrer stainless steel surface, 200V-240V/50-60Hz.
The SCO Tech Magnetic stirrer’s are suitable for routine laboratory operation with new stirring technology.
They are heavy duty instruments and they got an easy operation system. SCO Tech stirrer are available as classic versions or high advanced PC controlled versions. The wide range of possible selections will meet your requirement. With or without heating, the stainless steel or ceramic plate surface will help you in your daily work. SMH stirrers can be with LCD, LED or analogue display.
Specifications: | |
| Dimension of plate | Ø 135 mm (5 inch) |
| Work plate material | Stainless steel / or ceramic coated |
| Motor type | DC motor |
| Motor rating input | 5 W |
| Motor rating output | 3 W |
| Power | 515 W |
| Voltage | 100-120/200-240 V |
| Frequency | 50/60 |
| Max. stirring quantity | 3 L [H2O] |
| Max. magnetic bar | 50 mm (L x Ø) |
| Speed range | 100-1500 rpm |
| Speed display | LED |
| Heating power | 500 W |
| Temperature range | RT – 280°C increment 1 |
| Control accuracy of work plate | ±1(100 °C) |
| Safety temperature | 320 °C |
| Temperature display | LED |
| Temp. display accuracy | ±1 °C |
| Temperature sensor | PT1000 External |
| Control accuracy | ±0.5 °C ( with external temperature sensor PT1000 ) |
| Heating warning | 50 °C |
| Remote control | N/A |
| Protection class | IP21 according to DIN EN60529 |
| Dimensions | (W x D x H) 150 x 260 x 80 mm |
| Weight | 2,8 kg |
| Perm. ambient Temp | 5 – 40 °C |
| Permissible rH | 0,8 |
LCD Magnetic stirrer with heating - SMH-p Series
LCD Magnetic stirrer with heating stainless steel surface, 200V-240V/50-60Hz.
The SCO Tech Magnetic stirrer’s are suitable for routine laboratory operation with new stirring technology.
They are heavy duty instruments and they got an easy operation system. SCO Tech stirrer are available as classic versions or high advanced PC controlled versions. The wide range of possible selections will meet your requirement. With or without heating, the stainless steel or ceramic plate surface will help you in your daily work. SMH stirrers can be with LCD, LED or analogue display.
Specifications:
| |
| Dimension of plate | Ø 135 mm (5 inch) |
| Work plate material | Stainless steel / or ceramic coated |
| Motor type | DC brushless motor |
| Motor rating input | 18 W |
| Motor rating output | 10 W |
| Power | 550 W |
| Voltage | 200-240 V |
| Frequency | 50/60 Hz |
| Max. stirring quantity | 20 L [H2O] |
| Max. magnetic bar | 80 mm (L x Ø) |
| Speed range | 100-1500 rpm |
| Speed display | LCD |
| Speed display resolution | ±1 rpm |
| Heating power | 500 W |
| Temperature range | RT – 340°C increment 1 |
| Control accuracy of work plate | ±1( ±1%(>100 °C) |
| Safety temperature | 360 °C |
| Temperature display | LCD |
| Temp. display accuracy | ±0.1 °C |
| Temperature sensor | PT1000 External |
| Control accuracy | ±0.2 °C ( with external temperature sensor PT1000 ) |
| Heating warning | 50 °C |
| Remote control | Yes (RS232 interface) |
| Protection class | IP42 according to DIN EN60529 |
| Dimensions | (W x D x H) 160 x 280 x 85 mm |
| Weight | 2,8 kg |
| Perm. ambient Temp | 5 – 40 °C |
| Permissible rH | 0,8 |
