CHEMICAL/EQUIPMENT
MegaQuant™ Wave Spectrophotometer / MegaQuant™ Wave Starter Pack (Chemistry Analyzer)
| Supplier: | Megazyme |
| Warranty: | 1 year |
| Assay Format: | Spectrophotometer |
| Detection Method: | Absorbance |
| Features: |
|
| Specification: |
MegaQuant™ Wave Starter Pack Contents:
|
The MegaQuant™ Wave Spectrophotometer (Chemistry Analyzer) is a compact, economical, standalone benchtop visible spectrophotometer supplied with exclusive software offering the capability of up to 4 absorbance readings per sample to accommodate sequential reactions. An extensive and continually expanding range of pre-installed protocols for use with Megazyme test kits, is also included, offering ease of use for the analyst, providing on-board step-by-step instruction and fully automated calculation of results, even accounting for individual sample dilution.
Its streamlined design offers touch screen interface, superb optics, on-board curve-fitting software, and built-in printer to meet the requirements of modern laboratories and wineries.
Product Options:
The MegaQuant™ Wave is available as a single item spectrophotometer (D-MQWAVE-1) or as the MegaQuant™ Wave Starter Pack (D-MQWAVE-2).
The MegaQuant™ Wave Starter Pack provides all equipment and accessories needed for immediate sample analysis and includes the MegaQuant™ Wave Spectrophotmeter, pipettes, sample tubes, volumetric flasks, timer, PVPP tablets and filtration apparatus.
| Symbol : | Not Applicable |
| Signal Word : | Not Applicable |
| Hazard Statements : | Not Applicable |
| Precautionary Statements : | Not Applicable |
Tubes for MegaQuant™ Wave Spectrophotometer (Chemistry Analyzer)
| Supplier: | Megazyme |
| Specification: | Glass tubes (12 x 75 mm) |
Glass tubes (12 x 75 mm) for use with the MegaQuant™ Wave Spectrophotometer (Chemistry Analyzer)
| Symbol : | Not Applicable |
| Signal Word : | Not Applicable |
| Hazard Statements : | Not Applicable |
| Precautionary Statements : | Not Applicable |
Megazyme Incubation Bath MK III
| Manufacturer: | Megazyme |
| Supplier: | Megazyme |
| Warranty: | 1 year |
| Features: |
|
| Specification: | Temperatures up to 60oC |
This product has been discontinued
Megazyme Incubation Bath MK III is supplied with test-tube rack and 16 stirrer bars and tubes. With this bath and attachments, it is possible to stir 16 individual tubes and incubate at temperatures up to 60oC (+0.1oC). The magnetic stirrer and immersion heater must be purchased separately.
Symbol :Not ApplicableSignal Word :Not ApplicableHazard Statements :Not ApplicablePrecautionary Statements :Not Applicable
Water Bath for Total Dietary Fiber Procedures
| Supplier: | Megazyme |
| Warranty: | 1 year |
| Features: | Supplied with 4 recommended incubation bottles and stirrer bars, and 2 spatulas. It is possible to stir and incubate 15 samples concurrently. |
| Specification: | Temperatures up to 60oC |
| Symbol : | Not Applicable |
| Signal Word : | Not Applicable |
| Hazard Statements : | Not Applicable |
| Precautionary Statements : | Not Applicable |
Acetic Acid Standard Solution (1.8 g/L)
| Content: | 50 mL |
| Shipping Temperature: | Ambient |
| Storage Temperature: | 4oC |
| Physical Form: | Solution |
| Stability: | > 1 year under recommended storage conditions |
| CAS Number: | 64-19-7 |
| Synonyms: | Ethanoic acid |
| Molecular Formula: | C2H4O2 |
| Molecular Weight: | 60.05 |
| Concentration: | 1.8 g/L in 0.02% sodium azide |
RECOMMENDED APPLICATIONS:
Analytical standard solution for use as a control sample or calibrator with analytical test kits that measure acetic acid. Especially for use to generate calibration curves for auto-analyser
Symbol :Not ApplicableSignal Word :Not ApplicableHazard Statements :Not ApplicablePrecautionary Statements :Not Applicable
Ammonia Standard Solution (0.1 g/L)
| Content: | 50 mL |
| Shipping Temperature: | Ambient |
| Storage Temperature: | 4oC |
| Physical Form: | Solution |
| Stability: | > 1 year under recommended storage conditions |
| CAS Number: | 1336-21-6 |
| Synonyms: | Ammonia, aqueous solution |
| Molecular Formula: | NH3 |
| Molecular Weight: | 17.03 |
| Concentration: | 0.1 g/L in 0.02% sodium azide |
RECOMMENDED APPLICATIONS:
Analytical standard solution for use as a control sample or calibrator with analytical test kits that measure ammonia. Especially for use to generate calibration curves for auto-analyser or microplate assay formats with the following enzymatic tests kits
| Symbol : | Not Applicable |
| Signal Word : | Not Applicable |
| Hazard Statements : | Not Applicable |
| Precautionary Statements : | Not Applicable |
Citric Acid Standard Solution (3 g/L)
| Content: | 50 mL |
| Shipping Temperature: | Ambient |
| Storage Temperature: | 4oC |
| Physical Form: | Solution |
| Stability: | > 1 year under recommended storage conditions |
| CAS Number: | 77-92-9 |
| Synonyms: | 2-Hydroxypropane-1,2,3-tricarboxylic acid |
| Molecular Formula: | C6H8O7 |
| Molecular Weight: | 192.12 |
| Concentration: | 3 g/L in 0.02% sodium azide |
RECOMMENDED APPLICATIONS:
Analytical standard solution for use as a control sample or calibrator with analytical test kits that measure citric acid. Especially for use to generate calibration curves for auto-analyser or microplate assay formats with the following enzymatic tests kit
| Symbol : | Not Applicable |
| Signal Word : | Not Applicable |
| Hazard Statements : | Not Applicable |
| Precautionary Statements : | Not Applicable |
Ethanol Standard Solution (0.3 g/L)
| Content: | 50 mL |
| Shipping Temperature: | Ambient |
| Storage Temperature: | 4oC |
| Physical Form: | Solution |
| Stability: | > 1 year under recommended storage conditions |
| CAS Number: | 64-17-5 |
| Synonyms: | Ethyl alcohol |
| Molecular Formula: | C2H5OH |
| Molecular Weight: | 46.07 |
| Concentration: | 0.3 g/L in 0.02% sodium azide |
RECOMMENDED APPLICATIONS:
Analytical standard solution for use as a control sample or calibrator with analytical test kits that measure Ethanol. Especially for use to generate calibration curves for auto-analyser or microplate assay formats with the following enzymatic tests kits
| Symbol : | Not Applicable |
| Signal Word : | Not Applicable |
| Hazard Statements : | Not Applicable |
| Precautionary Statements : | Not Applicable |
D-Fructose Standard Solution (6 g/L)
| Content: | 50 mL |
| Shipping Temperature: | Ambient |
| Storage Temperature: | 4oC |
| Physical Form: | Solution |
| Stability: | > 1 year under recommended storage conditions |
| CAS Number: | 57-48-7 |
| Synonyms: | D-fructose |
| Molecular Formula: | C6H12O6 |
| Molecular Weight: | 180.16 |
| Concentration: | 6 g/L in 0.02% sodium azide |
| Symbol : | Not Applicable |
| Signal Word : | Not Applicable |
| Hazard Statements : | Not Applicable |
| Precautionary Statements : | Not Applicable |
D-Glucose Standard Solution (6 g/L)
| Content: | 50 mL |
| Shipping Temperature: | Ambient |
| Storage Temperature: | 4oC |
| Physical Form: | Solution |
| Stability: | > 1 year under recommended storage conditions |
| CAS Number: | 50-99-7 |
| Synonyms: | D-glucose |
| Molecular Formula: | C6H12O6 |
| Molecular Weight: | 180.16 |
| Concentration: | 6 g/L in 0.02% sodium azide |
| Symbol : | Not Applicable |
| Signal Word : | Not Applicable |
| Hazard Statements : | Not Applicable |
| Precautionary Statements : | Not Applicable |
Isoleucine Standard Solution (0.2 g N/L)
| Content: | 50 mL |
| Shipping Temperature: | Ambient |
| Storage Temperature: | 4oC |
| Physical Form: | Solution |
| Stability: | > 1 year under recommended storage conditions |
| CAS Number: | 73-32-5 |
| Synonyms: | (2S,3S)-2-Amino-3-methylpentanoic acid |
| Molecular Formula: | C6H13NO2 |
| Molecular Weight: | 131.17 |
| Concentration: | 0.2 g N/L in 0.02% sodium azide |
| Symbol : | Not Applicable |
| Signal Word : | Not Applicable |
| Hazard Statements : | Not Applicable |
| Precautionary Statements : | Not Applicable |
D-Lactic Acid Standard Solution (1 g/L)
| Content: | 50 mL |
| Shipping Temperature: | Ambient |
| Storage Temperature: | 4oC |
| Physical Form: | Solution |
| Stability: | > 1 year under recommended storage conditions |
| CAS Number: | 10326-41-7 |
| Synonyms: | (R)-lactic acid, (2R)-2-hydroxypropanoic acid |
| Molecular Formula: | C3H6O3 |
| Molecular Weight: | 98.08 |
| Concentration: | 1.0 g/L in 0.02% sodium azide |
RECOMMENDED APPLICATIONS:
| Symbol : | Not Applicable |
| Signal Word : | Not Applicable |
| Hazard Statements : | Not Applicable |
| Precautionary Statements : | Not Applicable |
L-Lactic Acid Standard Solution (1 g/L)
| Content: | 50 mL |
| Shipping Temperature: | Ambient |
| Storage Temperature: | 4oC |
| Physical Form: | Solution |
| Stability: | > 1 year under recommended storage conditions |
| CAS Number: | 79-33-4 |
| Synonyms: | L-(+)-lactic acid, (2S)-2-Hydroxypropionic acid |
| Molecular Formula: | C3H6O3 |
| Molecular Weight: | 98.08 |
| Concentration: | 1.0 g/L in 0.02% sodium azide |
| Symbol : | Not Applicable |
| Signal Word : | Not Applicable |
| Hazard Statements : | Not Applicable |
| Precautionary Statements : | Not Applicable |
L-Malic Acid Standard Solution (6 g/L)
| Content: | 50 mL |
| Shipping Temperature: | Ambient |
| Storage Temperature: | 4oC |
| Physical Form: | Solution |
| Stability: | > 1 year under recommended storage conditions |
| CAS Number: | 97-67-6 |
| Synonyms: | (S)-(-)-Malic acid, (S)-(-)-2-Hydroxysuccinic acid, L-Hydroxybutanedioic acid |
| Molecular Formula: | C4H6O5 |
| Molecular Weight: | 134.08 |
| Concentration: | 6 g/L in 0.02% sodium azide |
| Symbol : | Not Applicable |
| Signal Word : | Not Applicable |
| Hazard Statements : | Not Applicable |
| Precautionary Statements : | Not Applicable |
L-Tartaric Acid Standard Solution (10 g/L)
| Content: | 50 mL |
| Shipping Temperature: | Ambient |
| Storage Temperature: | 4oC |
| Physical Form: | Solution |
| Stability: | > 1 year under recommended storage conditions |
| CAS Number: | 87-69-4 |
| Synonyms: | 2,3-Dihydroxybutanedioic acid |
| Molecular Formula: | C4H6O6 |
| Molecular Weight: | 150.09 |
| Concentration: | 10 g/L |
| Symbol : | GHS07 |
| Signal Word : | Warning |
| Hazard Statements : | H319 |
| Precautionary Statements : | P264, P280, P305+P351+P338, P337+P313 |
MES monohydrate Buffer Salt
| Content: | 250 g |
| Shipping Temperature: | Ambient |
| Storage Temperature: | Ambient |
| Physical Form: | Solid |
| Stability: | > 5 years under recommended storage conditions |
| CAS Number: | 145224-94-8 |
| Molecular Formula: | C6H13NO4S.H2O |
| Molecular Weight: | 213.2 |
| Purity: | ≥ 99% |
| pKa: | 6.1 at 25oC |
| Useful pH Range: | 5.5-6.7 |
| Symbol : | GHS07 |
| Signal Word : | Warning |
| Hazard Statements : | H315, H319, H335 |
| Precautionary Statements : | P261, P264, P271, P280, P302+P352, P304+P340 |
TRIS Buffer Salt
| Content: | 500 g |
| Shipping Temperature: | Ambient |
| Storage Temperature: | Ambient |
| Physical Form: | Solid |
| Stability: | > 5 years under recommended storage conditions |
| CAS Number: | 77-86-1 |
| Molecular Formula: | C4H11NO3 |
| Molecular Weight: | 121.1 |
| Purity: | ≥ 99% |
| pKa: | 8.1 at 25oC |
| Useful pH Range: | 7.0-9.0 |
| Symbol : | Not Applicable |
| Signal Word : | Not Applicable |
| Hazard Statements : | Not Applicable |
| Precautionary Statements : | Not Applicable |
Amberlite FPA OH- Ion Exchange Resin
| Content: | 2.5 Kg |
| Shipping Temperature: | Ambient |
| Storage Temperature: | 2-8oC |
| Stability: | > 2 years under recommended storage conditions |
| Symbol : | Not Applicable |
| Signal Word : | Not Applicable |
| Hazard Statements : | Not Applicable |
| Precautionary Statements : | Not Applicable |
Ambersep 200 H+ Ion Exchange Resin
| Content: | 2.5 Kg |
| Shipping Temperature: | Ambient |
| Storage Temperature: | 2-8oC |
| Stability: | > 2 years under recommended storage conditions |
| Symbol : | GHS05, GHS07 |
| Signal Word : | Danger |
| Hazard Statements : | H315, H318, H335 |
| Precautionary Statements : | P261, P264, P271, P280, P302+P352, P304+P340 |
Celite
| Content: | 100 g or 500 g |
| Shipping Temperature: | Ambient |
| Storage Temperature: | Ambient |
| Physical Form: | Powder |
| Stability: | > 2 years under recommended storage conditions |
| CAS Number: | 61790-53-2 |
| Symbol : | GHS07, GHS08 |
| Signal Word : | Danger |
| Hazard Statements : | H319, H350, H372 |
| Precautionary Statements : | P201, P202, P260, P264, P270, P280 |
Concanavalin A (Con A)
| Content: | 1000 mg or 200 mg |
| Shipping Temperature: | Ambient |
| Storage Temperature: | Below -10oC |
| Physical Form: | Powder |
| Stability: | > 2 years under recommended storage conditions |
| CAS Number: | 11028-71-0 |
| Symbol : | GHS08 |
| Signal Word : | Danger |
| Hazard Statements : | H317, H334, H361 |
| Precautionary Statements : | P201, P202, P261, P272, P280, P284 |
L-Cysteine Hydrochloride Monohydrate
| Content: | 200 g |
| Shipping Temperature: | Ambient |
| Storage Temperature: | Ambient |
| Physical Form: | Powder |
| Stability: | > 5 years under recommended storage conditions |
| CAS Number: | 7048-04-6 |
| Molecular Formula: | C3H7NO2S.HCL.H2O |
| Molecular Weight: | 175.6 |
| Purity: | ≥ 99% |
| Symbol : | Not Applicable |
| Signal Word : | Not Applicable |
| Hazard Statements : | Not Applicable |
| Precautionary Statements : | Not Applicable |
Adenosine 5’-triphosphate (ATP), Disodium Salt
| Content: | 20 g or 100 g |
| Shipping Temperature: | Ambient |
| Storage Temperature: | Below -10oC |
| Physical Form: | Solid |
| Stability: | > 5 years under recommended storage conditions |
| CAS Number: | 51963-61-2, 34369-07-8 |
| Synonyms: | Adenosine 5’-triphosphate, disodium salt (ATP, 5’-ATP, ATP-Na2) |
| Molecular Formula: | C10H14N5Na2O13P3 |
| Molecular Weight: | 551.1 (anhydrous disodium salt) |
| Purity: | C-ATP-20G: ≥ 99% C-ATP-100G: ≥ 99% |
| Symbol : | Not Applicable |
| Signal Word : | Not Applicable |
| Hazard Statements : | Not Applicable |
| Precautionary Statements : | Not Applicable |
Calcofluor Fluorescent Stain
| Content: | 5 g or 10 g |
| Shipping Temperature: | Ambient |
| Storage Temperature: | Ambient |
| Physical Form: | Solid |
| Stability: | > 5 years under recommended storage conditions |
| CAS Number: | 4404-43-7 |
| Molecular Formula: | C40H44N12O10S2 |
| Molecular Weight: | 917.0 |
| Purity: | Not Applicable |
| Method recognition: | EBC Method 3.10.2, EBC Method 4.16.2, EBC Method 8.13.2, EBC Method 8.13.3, EBC Method 9.31.2 and ASBC Method Wort 18 |
| Symbol : | Not Applicable |
| Signal Word : | Not Applicable |
| Hazard Statements : | Not Applicable |
| Precautionary Statements : | Not Applicable |
COENZYME A (CoA), Trilithium Salt
| Content: | 500 mg |
| Shipping Temperature: | Ambient |
| Storage Temperature: | Below -10oC |
| Physical Form: | Solid |
| Stability: | > 5 years under recommended storage conditions |
| CAS Number: | 18439-24-2 |
| Synonyms: | Coenzyme A (trilithium)(Co A-Li) |
| Molecular Formula: | C21H33Li3N7O16P3S |
| Molecular Weight: | 785.3 (anhydrous trilithium salt) |
| Purity: | ≥ 98% |
| Symbol : | GHS07 |
| Signal Word : | Warning |
| Hazard Statements : | H315, H319, H335 |
| Precautionary Statements : | P261, P264, P271, P280, P302+P352, P304+P340 |
JIM5 [Anti-Homogalacturonan] Antibody
| Content: | 2 mL |
| Shipping Temperature: | Ambient |
| Storage Temperature: | Short term stability: 2-8oC, Long term stability: Below -10oC (Avoid freeze/thaw cycles) |
| Physical Form: | Liquid |
| Stability: | > 4 years at 4oC |
| Antibody Name: | JIM5 |
| Antigen: | Pectic polysaccharide / Homogalacturonan |
| Epitope: | Paritally methyl esterified and unesterfied homogalacturonan |
| Conjugate: | Unconjugated |
| Buffer: | Serum-free cell culture supernatant, 0.02% sodium azide |
| Tested Application: | Immunofluorescence (1:10); ELISA (1:10) |
| Positive Control: | Polygalacturonic Acid (P-PGACT) |
| Clonality: | Monoclonal |
| Isotype: | IgG |
| Host Species: | Rat |
The JIM5, rat, monoclonal antibody recognises the α-1,4-linked homogalacturonan domain of pectic polysaccharides. It has no known cross-reactivity with other polymers. It can recognise partially methyl esterified epitopes of pectic polysaccharides (homogalacturonan) in several species and also binds unesterified homogalacturonan.
LM19 is recommended for the detection of unesterified homogalacturonan.
From the laboratory of Paul Knox, PhD, University of Leeds.
| Symbol : | Not Applicable |
| Signal Word : | Not Applicable |
| Hazard Statements : | Not Applicable |
| Precautionary Statements : | Not Applicable |
LM6 [Anti-1,5-α-L-Arabinan] Antibody
| Content: | 2 mL |
| Shipping Temperature: | Ambient |
| Storage Temperature: | Short term stability: 2-8oC, Long term stability: Below -10oC (Avoid freeze/thaw cycles) |
| Physical Form: | Liquid |
| Stability: | > 4 years at 4oC |
| Antibody Name: | LM6 |
| Antigen: | Pectic polysaccahride / α-1,5-arabinan |
| Epitope: | Linear α-1,5-Arabinan |
| Conjugate: | Unconjugated |
| Buffer: | Serum-free cell culture supernatant, 0.02% sodium azide |
| Tested Application: | Immunofluorescence (1:10); ELISA (1:10) |
| Positive Control: | Arabinan (Sugar Beet) (P-ARAB) |
| Clonality: | Monoclonal |
| Isotype: | IgG |
| Host Species: | Rat |
The LM6, rat, monoclonal antibody was generated using a neoglycoprotein (arabinoheptaose-BSA) and is a high affinity antibody to (1,5)-α-L-arabinosyl residues found in the arabinan components of certain pectic polymers such as rhamnogalacturonan-I. The LM6 arabinan epitope is widely found in the cell walls of many plants and can also be present in isolated pectin preparations used for commercial purposes. LM6 antibody recognises a linear pentasaccharide in (1,5)-α-L-arabinans and can recognise pectic polysaccharides in several species. It has no cross-reactivity with gum arabic but may recognize arabinogalactan-proteins (AGPs) in some species. In competitive inhibition ELISAs, LM6 antibody binding to (1,5)-α-L-arabinan was inhibited (50%) by 40 ng/mL (1,5)-α-L-arabinopentaose and 19 ng/mL (1,5)-α-L-arabino-hexaose.
From the laboratory of Paul Knox, PhD, University of Leeds.
| Symbol : | Not Applicable |
| Signal Word : | Not Applicable |
| Hazard Statements : | Not Applicable |
| Precautionary Statements : | Not Applicable |
LM10 [Anti-Xylan] Antibody
| Content: | 2 mL |
| Shipping Temperature: | Ambient |
| Storage Temperature: | Short term stability: 2-8oC, Long term stability: Below -10oC (Avoid freeze/thaw cycles) |
| Physical Form: | Liquid |
| Stability: | > 4 years at 4oC |
| Antibody Name: | LM10 |
| Antigen: | Heteroxylan |
| Epitope: | Unsubstituted β-1,4-Xylan |
| Conjugate: | Unconjugated |
| Buffer: | Serum-free cell culture supernatant, 0.02% sodium azide |
| Tested Application: | Immunofluorescence (1:10); ELISA (1:10) |
| Positive Control: | Xylan (Beechwood; purified) (P-XYLNBE) |
| Clonality: | Monoclonal |
| Isotype: | IgG2c |
| Host Species: | Rat |
This product has been discontinued (read more).
The LM10, rat, monoclonal antibody was generated using a neoglycoprotein (xylopentaose-BSA) and is a high affinity antibody to the non-reducing end of (1,4)-β-D-xylosyl residues that constitute the backbone of xylans. LM10 antibody has no cross-reactivity to highly substituted xylan such as wheat arabinoxylan where the xylan backbone is substituted with sidechains of arabinofuranosyl residues.
From the laboratory of Paul Knox, PhD, University of Leeds.
| Symbol : | Not Applicable |
| Signal Word : | Not Applicable |
| Hazard Statements : | Not Applicable |
| Precautionary Statements : | Not Applicable |
LM11 [Anti-Xylan] Antibody
| Content: | 2 mL |
| Shipping Temperature: | Ambient |
| Storage Temperature: | Short term stability: 2-8oC, Long term stability: Below -10oC (Avoid freeze/thaw cycles) |
| Physical Form: | Liquid |
| Stability: | > 4 years at 4oC |
| Antibody Name: | LM11 |
| Antigen: | Heteroxylan |
| Epitope: | Unsubstituted and low substituted β-1,4-Xylan |
| Conjugate: | Unconjugated |
| Buffer: | Serum-free cell culture supernatant, 0.02% sodium azide |
| Tested Application: | Immunofluorescence (1:10); ELISA (1:10) |
| Positive Control: | Xylan (Beechwood; purified) (P-XYLNBE) |
| Clonality: | Monoclonal |
| Isotype: | IgM |
| Host Species: | Rat |
The LM11, rat, monoclonal antibody was generated using a neoglycoprotein (xylopentaose-BSA) and is a high affinity antibody to the non-reducing end of (1,4)-β-D-xylosyl residues that constitute the backbone of xylans. LM11 antibody can bind strongly to xylans that have a higher degree of substitution of the xylan backbone such as wheat arabinoxylan where the xylan backbone is substituted with sidechains of arabinofuranosyl residues.
From the laboratory of Paul Knox, PhD, University of Leeds.
| Symbol : | Not Applicable |
| Signal Word : | Not Applicable |
| Hazard Statements : | Not Applicable |
| Precautionary Statements : | Not Applicable |
LM15 [Anti-Xyloglucan] Antibody
| Content: | 2 mL |
| Shipping Temperature: | Ambient |
| Storage Temperature: | Short term stability: 2-8oC, Long term stability: Below -10oC (Avoid freeze/thaw cycles) |
| Physical Form: | Liquid |
| Stability: | > 4 years at 4oC |
| Antibody Name: | LM15 |
| Antigen: | Xyloglucan |
| Epitope: | Xylosyl residues in the XXXG motif of xyloglucan |
| Conjugate: | Unconjugated |
| Buffer: | Serum-free cell culture supernatant, 0.02% sodium azide |
| Tested Application: | Immunofluorescence (1:10); ELISA (1:10) |
| Positive Control: | Xyloglucan (Tamarind) (P-XYGLN) |
| Clonality: | Monoclonal |
| Isotype: | IgG2c |
| Host Species: | Rat |
The LM15, rat, monoclonal antibody was generated using a neoglycoprotein incorporating the xylosylated heptasaccharide from tamarind xyloglucan (XXXG-BSA) and is a high affinity antibody to xylosyl residues in the XXXG motif of xylglucan in several species.
From the laboratory of Paul Knox, PhD, University of Leeds.
| Symbol : | Not Applicable |
| Signal Word : | Not Applicable |
| Hazard Statements : | Not Applicable |
| Precautionary Statements : | Not Applicable |
LM20 [Anti-Homogalacturonan] Antibody
| Content: | 2 mL |
| Shipping Temperature: | Ambient |
| Storage Temperature: | Short term stability: 2-8oC, Long term stability: Below -10oC (Avoid freeze/thaw cycles) |
| Physical Form: | Liquid |
| Stability: | > 4 years at 4oC |
| Antibody Name: | LM20 |
| Antigen: | Pectic polysaccharide / Homogalacturonan (esterified) |
| Epitope: | Methyl esterified homogalacturonan |
| Conjugate: | Unconjugated |
| Buffer: | Serum-free cell culture supernatant, 0.02% sodium azide |
| Tested Application: | Immunofluorescence (1:10); ELISA (1:10) |
| Positive Control: | Citrus Pectin (Highly esterifed) |
| Clonality: | Monoclonal |
| Isotype: | IgM |
| Host Species: | Rat |
The LM20, rat, monoclonal antibody recognises the α-1,4-linked homogalacturonan domain of pectic polysaccharides in several species. It has no known cross-reactivity with other polymers. The LM20 antibody recognises and binds methyl esterified homogalacturonan, it does not bind to un-esterified homogalacturonan.
LM20 binds to a higher density esterified homogalacturonan epitope than JIM7.
From the laboratory of Paul Knox, PhD, University of Leeds.
| Symbol : | Not Applicable |
| Signal Word : | Not Applicable |
| Hazard Statements : | Not Applicable |
| Precautionary Statements : | Not Applicable |
β-Nicotinamide Adenine Dinucleotide (NAD+), Oxidised
| Content: | 5 g or 25 g |
| Shipping Temperature: | Ambient |
| Storage Temperature: | Below -10oC |
| Physical Form: | Solid |
| Stability: | > 5 years under recommended storage conditions |
| CAS Number: | 53-84-9 |
| Synonyms: | β-Nicotinamide adenine dinucleotide, oxidised hydrate (NAD+, β-NAD+, β-DPN+, Oxidised Coenzyme-I) |
| Molecular Formula: | C21H27N7O14P2 |
| Molecular Weight: | 663.4 (anhydrous) |
| Purity: | ≥ 99% |
High purity β-Nicotinamide Adenine Dinucleotide (NAD+), Oxidised, for use as a cofactor for research, biochemical enzyme assays and in vitro diagnostic analysis.
| Symbol : | Not Applicable |
| Signal Word : | Not Applicable |
| Hazard Statements : | Not Applicable |
| Precautionary Statements : | Not Applicable |
β-Nicotinamide Adenine Dinucleotide Phosphate (NADP+), Oxidised Sodium Salt
| Content: | 2 g or 10 g |
| Shipping Temperature: | Ambient |
| Storage Temperature: | Below -10oC |
| Physical Form: | Solid |
| Stability: | > 5 years under recommended storage conditions |
| CAS Number: | 1184-16-3 |
| Synonyms: | β-Nicotinamide adenine dinucleotide phosphate, oxidised sodium salt (NADP+, β-NADP+-Na, β-TPN+, Oxidised Coenzyme-II) |
| Molecular Formula: | C21H28N7NaO17P3 |
| Molecular Weight: | 765.4 (anhydrous sodium salt) |
| Purity: | C-NADP-10G: ≥ 99%, C-NADP-2G: ≥ 99% |
High purity β-Nicotinamide Adenine Dinucleotide Phosphate (NADP+), Oxidised Sodium Salt, for use as a cofactor for research, biochemical enzyme assays and in vitro diagnostic analysis.
| Symbol : | Not Applicable |
| Signal Word : | Not Applicable |
| Hazard Statements : | Not Applicable |
| Precautionary Statements : | Not Applicable |
β-Nicotinamide Adenine Dinucleotide (NADH), Reduced Disodium Salt
| Content: | 2 g or 10 g |
| Shipping Temperature: | Ambient |
| Storage Temperature: | Below -10oC |
| Physical Form: | Solid |
| Stability: | > 5 years under recommended storage conditions |
| CAS Number: | 1184-16-3 |
| Synonyms: | β-Nicotinamide adenine dinucleotide phosphate, oxidised sodium salt (NADP+, β-NADP+-Na, β-TPN+, Oxidised Coenzyme-II) |
| Molecular Formula: | C21H28N7NaO17P3 |
| Molecular Weight: | 765.4 (anhydrous sodium salt) |
| Purity: | C-NADP-10G: ≥ 99%, C-NADP-2G: ≥ 99% |
| Symbol : | Not Applicable |
| Signal Word : | Not Applicable |
| Hazard Statements : | Not Applicable |
| Precautionary Statements : | Not Applicable |
