Dry Bath Incubator
Ultimate Dry Bath Incubator, MC-01N
Ultimate Dry Bath Incubator is available with different heating and cooling profiles, along with a broad selection of interchangeable blocks.
The model is designed for a variety of applications including ligation, restriction digest, denaturing DNA, BUN, melting agar, coagulation studies, hybridization and hot start thermo-cycled reaction. The built-in 2.6″ LCD screen permit instant viewing and selection of operation modes: constant, programmable and annealing.
The microprocessor controller offers performance, precise control as well as rapid heating and cooling efficiency with excellent stability. The temperature can be set in 0.1°C increments, from -10°C to 100°C. Optional PC control software is available for real time data logging.
- Digital microprocessor offers performance and precise control
- Broad temperature control range & guaranteed uniformity
- Highly efficient heating & cooling rates
- Large LCD screen for easy selection of operation modes and setting inputs
- User temperature calibration
- Also a mini water bath and bead bath
- Optional PC recording software available
| Cat. No. | MC-01N |
|---|---|
| Chamber Dimension (WxLxH) | Approx. 5.1″x3.5″x2″ (130x90x50mm) |
| Display | 2.6″ LCD |
| Power | 400W |
| Dimension (WxLxH) | Approx. 7.9″x11.6″x5.5″ (200x295x140mm) |
| Controller | Digital microprocess controller |
| Heating Chamber | Molded Waterproof aluminum alloy coated with PTFE |
| Temperature Control Range | 30° below ambient temperature ( minimum -10° ) to 100° |
| Temperature Increment | 0.1° |
| Temperature Uniformity | ± 0.2° at 37° |
| Temperature Accuracy | ± 0.2° at 37° |
| Temperature Calibration | Yes |
| Operation Mode | Constant operation: constant temperature ( -10oC to 100oC ); Timer: 9999 (min) |
| Program operation: 1-4 steps and up to 9 cycles; timer: 9999 (min) | |
| Annealing program | |
| Safety Device | Leak proof heating chamber |
| Operating Temperature | Ambient to 40° |
| Special Feature | Can be used as water bath or bead bath incubator |
| Block Material | Aluminum alloy |
| Block Type | Standard and customized type are available |
| PC Connection | RS232 |
| Rated Voltage | 110V / 220V~ |
| Weight | Approx. 17.6lb (8kg) |
| Blocks | Ultimate MC Block |
| Dimension (WxLxH) | Approx. 3.5″x5.1″x1.8″ (89x129x46mm) |
| Block Material | Aluminum alloy |
| Block Lifter Well | Yes |
| Thermometer Well | Yes ( except microplate blocks ) |
Thermostirrer, TS-8W
Major Science Thermostirrers feature leading-edge speed performance and the broadest temperature control range to cover a variety of chemical and biological applications including synthesis of organic compounds, derivatization, drug solubility, protein crystallization and process optimization.
Mixing efficiency is maintained uniformly across the sample wells due to independent magnets under each well and thus ensures consistency of experimental results. Furthermore, Major Science designed a remote thermostirrer module for studies that require a thermostatic mixer to function as a part of an automated process such as a polymer viscometers.
- Microprocessor control with digital performance
- Brushless motor for individual well agitation
- Outstanding temp. control performance up to 200°C
- User temperature calibration
- Customization available
- Well-insulation around casework
- Over temperature protection
- LCD screen & timer (standalone model only)
- Highest stirring speed, 3500 rpm in the market
| Cat. No. | TS-8W-110 | TS-8W-220 |
|---|---|---|
| Controller | Digital microprocessor controller | |
| Display | 2.6” LCD monochrome display | |
| Motor | Brushless motor | |
| Number of position | 8 wells (2×4) with individual magnetic stirrer or customized | |
| Well diameter | Ø29.5mm, 62mm depth ** | |
| Stirring speed | 500 – 3500rpm | |
| Temperature control range | 5°C above ambient to 200°C | |
| Temperature increment | ± 0.1°C | |
| Temperature uniformity | ± 0.7°C @ 150°C | |
| Temperature accuracy | ± 0.2°C @ 150°C | |
| Temperature calibration | Yes | |
| Operating temperature | Ambient to 40°C | |
| Timer | 99 (hr): 59 (min) / Continuous | |
| Block material | PTFE coating with individual magnetic | |
| Data logging | RS 232 (Max. 2.5meter long) | |
| Safety | Insulated wells around casework | |
| Leakage proof for heating chamber | ||
| Over Temperature protection | ||
| Rated voltage | 110V~; 50/60Hz, 6.3A | 220V~; 50/60Hz, 3.15A |
| Dimension (WxLxH) | 8.97″x11.7″x6.24″ (230x300x160mm) | |
| Weight | Approx. 18.74lb (8.5kg) | |
| Power | 600W | |
| Vessel diameter | Max. 28.5mm or customized ** | |
| Communication port | RS-232 | |
* Temperature uniformity would be dependent on the integration to your automation system.
** Customized Specification.
*** cooling below ambient temperature is feasible with connection to a external chiller.
Mini Heating Dry Bath Incubator, MD-MINI
The Mini Heating Dry Bath Incubator incorporates innovative ideas of compactness, performance and versatility.
This palm-sized yet powerful device is designed to maximize benchtop space and enhance research productivity with ultra-precise temperature control. The interchangeable ability of heating blocks in various size permits accommodation of versatile tube sizes. Moreover, turn it into a water bath or bead bath with optional metallic thermal beads.
- Small size, fits in your palm
- User temperature calibration
- Single molded chamber, no cracks or welds
- PTFE coated chamber resists stains
- Can be used as a mini water bath or bead bath
- Outstanding heating rate
- Different sizes of heating block available for selection
- Clear cover to ensure temperature uniformity
- Optional in-car power adaptor provides portability on the road
| Cat. No. | MD-MINI |
|---|---|
| Display | LCD |
| Power | 50W |
| Dimension (WxLxH) | Approx. 6″x4.9″x3.8″ (153x125x97mm) |
| Controller | Digital microprocess controller |
| Heating chamber | Molded waterproof aluminum alloy coated with PTFE |
| Temperature control range | 5°C above ambient to 100°C |
| Temperature increment | 0.1°C |
| Temperature uniformity | ± 0.20°C at 37°C |
| Temperature accuracy | ± 0.20°C at 37°C |
| Temperature Calibration | Yes |
| Timer | 99 (hr): 59 (min) / Continuous |
| Safety | Leak proof heating chamber |
| Over temperature protection | |
| Operating temperature | Ambient to 40°C |
| Special Feature | Used as water bath or bead bath |
| Block material | Aluminum alloy |
| Block type | Standard and customized type are available |
| Rated voltage | 100V-240V~ |
| Weight | Approx. 1.3lb (0.6kg) |
| Blocks | |
| Block material | Aluminum alloy |
| Dimension (WxLxH) | Approx. 1.9″x2.8″x1.3″ (47x71x32mm) / Approx. 1.9″x2.8″x3″ (47x71x75mm) |
| Block lifter well | Yes |
| Thermometer well | Yes |
Mini Cooling Dry Bath Incubator, MC-0203
The Mini Heating Dry Bath Incubator incorporates innovative ideas of compactness, performance and versatility.
This palm-sized yet powerful device is designed to maximize benchtop space and enhance research productivity with ultra-precise temperature control. The interchangeable ability of heating blocks in various size permits accommodation of versatile tube sizes. Moreover, turn it into a water bath or bead bath with optional metallic thermal beads.
- Small size, fits in your palm
- User temperature calibration
- Single molded chamber, no cracks or welds
- PTFE coated chamber resists stains
- Can be used as a mini water bath or bead bath
- Outstanding heating and cooling rate
- Different sizes of aluminum alloy block available for selection
- Clear cover to ensure temperature uniformity
- Quick start / Constant mode / programmable mode / Annealing program operation mode
- Optional in car power adaptor provides portability on the road
| Cat. No. | MC-0203 |
|---|---|
| Display | LCD |
| Power | max. 60W |
| Dimension (WxLxH) | Approx. 5.3″x6″x7.3″ (135x152x185mm) (excluding lid) |
| Controller | High performance 32 bits microprocessor |
| Heating chamber | Molded waterproof aluminum alloy coated with PTFE |
| Temperature control range | 30°C below ambient temperature (minimum -10°C) to 100°C |
| Temperature Increment | 0.1°C |
| Temperature Uniformity | ± 0.2°C at 37°C |
| Temperature Accuracy | ± 0.2°C at 37°C |
| Temperature Calibration | 99 (hr): 59 (min) / Continuous |
| Heating Rate | Max. 5°C per min |
| Cooling Rate | Max. 4°C per min |
| Timer | 9999 (min) |
| Cooling/ Heating Parts | Peltier / Heating element |
| Operation Mode | Constant operation: constant temperature (-10°C to 100°C) |
| Program operation: 1-4 steps and up to 9 cycles | |
| Annealing program | |
| Quick start program: 4°C, 16°C, 37°C, 56°C, 95°C pre-set | |
| Safety | Leak proof heating chamber |
| Operating temperature | Ambient to 40°C |
| Special Feature | Can be used as water bath or bead bath incubator |
| Block material | Aluminum alloy |
| Block type | Standard and customized type are available |
| PC Connection | USB |
| Weight | Approx. 2.9lb (1.3kg) |
Genius Dry Bath Incubator, MD series, MD-01N / MD-02N
The Genius Dry Bath Incubators come in either single or dual block models, along with a complete set of interchangeable blocks.
It is designed for a variety of applications, including restriction digest, DNA denaturation, melting agar, coagulation studies, hybridization and hot start thermal-cycled reaction. The microprocessor controller offers highly accurate temperature control, rapid heating and excellent stability.
The temperature can be set in increments of 0.1°C from 5°C above ambient to 150°C. An optional temperature probe is available to place directly in samples. A timer can be set from 1- 999mins. The MD series Dry Bath Incubators can be used as a mini water bath or bead bath. Optional Function Control software allows the dry bath incubator to perform real-time data recording through a PC.
- Digital microprocessor offers precise performance control
- Highly accurate temperature control and broad control range
- Rapid heating rate
- Digital LED display & timer
- User temperature calibration
- Molded aluminum alloy chamber
- Function control software available
| Cat. No. | MD-01N (Single Block) | MD-02N (Dual Block) |
|---|---|---|
| Display | LCD | |
| Power | 125W | 200W |
| Dimension (WxLxH) | Approx. 7.9″x11.7″x3.2″ (200x298x88mm) | |
| Controller | Digital microprocess controller | |
| Heating chamber | Molded Waterproof aluminum alloy coated with PTFE | |
| Temperature control range | 5°C above ambient to 150°C | |
| Temperature Increment | 0.1°C | |
| Temperature Uniformity | ±0.2°C at 37°C | |
| Temperature Accuracy | ±0.2°C at 37°C | |
| Temperature Calibration | Yes | |
| Timer | 999 (min) / Continuous | |
| Safety | Leak proof heating chamber | |
| Over temperature protectionn | ||
| SSR failure detection | ||
| Operating temperature | Ambient to 40°C | |
| Special Feature | Can be used as water bath or bead bath incubator | |
| Block material | Aluminum alloy | |
| Block type | Standard and customized type are available | |
| PC Connection | RS232 | |
| Rated voltage | 110V / 220V | |
| Weight | Approx. 4.6lb (2.1kg) | Approx. 6.2lb (2.8kg) |
| Blocks | ||
| Block material | Aluminum alloy | |
| Dimension (WxLxH) | Approx. 3.1″x4.1″x2″ (79x104x50mm) for standard type | |
| Block lifter well | Yes | |
| Thermometer well | Yes (except microplate blocks) | |
Elite Dry Bath Incubator, EL series
The Elite Dry Bath Incubator comes in single or dual block modes along with a comprehensive set of interchangeable blocks.
It is designed for a variety of applications, including restriction digest, DNA denaturation, melting agar, coagulation studies, hybridization and hot start thermo-cycled reaction. Elite Dry Bath Incubator is recognized as the finest, fastest heating and smallest foot print dry bath incubator.
In addition, the aluminum blocks can be removed for the use of a mini water bath or a bead bath. The temperature setpoint can be set in increments of 0.1°C from 5°C above ambient to 150°C. Optional PC control software allows the dry bath incubator to perform real time data recording through a PC.
- Digital microprocessor controller confers performance and precise control
- Broad temperature control range & guaranteed uniformity
- Excellent heating rate
- Large LCD screen for instant observation
- User temperature calibration
- Can be used as a water bath or bead bath
- Molded aluminum alloy chamber
- Optional PC Control software available
| Cat. No. | EL-01 (Single Block) | EL-02 (Dual Block) |
|---|---|---|
| Display | LCD | |
| Power | 125W | 200W |
| Dimension (WxLxH) | 5.98″x5.91″x5.31″ (152x150x135mm) | 5.98″x9.06″x5.31″ (152x230x135mm) |
| Controller | Digital microprocess controller | |
| Heating chamber | Molded Waterproof aluminum alloy coated with PTFE | |
| Temperature control range | 5°C above ambient to 150°C | |
| Temperature increment | 0.1°C | |
| Temperature uniformity at 37°C | ± 0.2°C | |
| Temperature accuracy at 37°C | ± 0.2°C | |
| Timer | 99 (hr): 59 (min) / Continuous | |
| Safety | Leak proof heating chamber | |
| Over temperature protection | ||
| SSR failure detection | ||
| Operating temperature | Ambient to 40°C | |
| Block material | Aluminum alloy | |
| Block type | Standard and customized type are available | |
| PC Connection | RS232 | |
| Rated voltage | 110V / 220V | |
| Weight | Approx. 4.6lb (2.1kg) | Approx. 6.1lb (2.8kg) |
| Blocks | ||
| Block material | Aluminum alloy | |
| Dimension | (WxLxH) 3.11″x4.09″x1.97″ (79x104x50mm) | |
| Block lifter well | Yes | |
| Thermometer well | Yes (except microplate blocks) | |
