Gas sensors
- Automatic air sampling pump GSP series
- Carbon monoxide detector
- Gas sensors
- Products related to gas collection
- Hydrogen Sulphide detector
- Calibration gas generation system
- Flammable gas detector
- Oxygen detector
- Multi gas detector
Oxygen sensorO2-208G
This galvanic cell sensor that measures oxygen concentration has been in use since the mid-1960s to detect (and alert) oxygen deficiency throughout all industries.
- No technical expertise is necessary
- Compact and lightweight
- Outstanding performance with instant real-time measurement
- Oxygen metre of intrinsically safe explosion-proof design
- No electric power is necessary to operate the sensor
- Low-priced oxygen metres are now a reality
φ15 x 14 x 20 4g : GOC-100,GOC-100-2
Oxygen sensorO2-206G
This galvanic cell sensor that measures oxygen concentration has been in use since the mid-1960s to detect (and alert) oxygen deficiency throughout all industries.
- No technical expertise is necessary
- Compact and lightweight
- Outstanding performance with instant real-time measurement
- Oxygen metre of intrinsically safe explosion-proof design
- No electric power is necessary to operate the sensor
- Low-priced oxygen metres are now a reality
sensor configuration
φ15 x 14 4g : GOT-110A / GOT-110A-2 / GOT-110B / GOT-110B-2
Oxygen sensorO2-204G
This galvanic cell sensor that measures oxygen concentration has been in use since the mid-1960s to detect (and alert) oxygen deficiency throughout all industries.
- No technical expertise is necessary
- Compact and lightweight
- Outstanding performance with instant real-time measurement
- Oxygen metre of intrinsically safe explosion-proof design
- No electric power is necessary to operate the sensor
- Low-priced oxygen metres are now a reality
sensor configuration
φ19 x 31 11g : GOA-6H/GOA-7H
Oxygen sensorO2-207G
This galvanic cell sensor that measures oxygen concentration has been in use since the mid-1960s to detect (and alert) oxygen deficiency throughout all industries.
- No technical expertise is necessary
- Compact and lightweight
- Outstanding performance with instant real-time measurement
- Oxygen metre of intrinsically safe explosion-proof design
- No electric power is necessary to operate the sensor
- Low-priced oxygen metres are now a reality
sensor configuration
φ24.5 x55 45g : GOA-40D-5
Oxygen sensorH-3A
This galvanic cell sensor that measures oxygen concentration has been in use since the mid-1960s to detect (and alert) oxygen deficiency throughout all industries.
- No technical expertise is necessary
- Compact and lightweight
- Outstanding performance with instant real-time measurement
- Oxygen metre of intrinsically safe explosion-proof design
- No electric power is necessary to operate the sensor
- Low-priced oxygen metres are now a reality
sensor configuration
33 x 30 x 36 23g : GOM-3A / GOMHC-3A etc.
Oxygen sensor25BE
This galvanic cell sensor that measures oxygen concentration has been in use since the mid-1960s to detect (and alert) oxygen deficiency throughout all industries.
- No technical expertise is necessary
- Compact and lightweight
- Outstanding performance with instant real-time measurement
- Oxygen metre of intrinsically safe explosion-proof design
- No electric power is necessary to operate the sensor
- Low-priced oxygen metres are now a reality
sensor configuration
φ36 x 38 110g : (Fixed -formula type)
Oxygen sensorD-III(3)
This galvanic cell sensor that measures oxygen concentration has been in use since the mid-1960s to detect (and alert) oxygen deficiency throughout all industries.
- No technical expertise is necessary
- Compact and lightweight
- Outstanding performance with instant real-time measurement
- Oxygen metre of intrinsically safe explosion-proof design
- No electric power is necessary to operate the sensor
- Low-priced oxygen metres are now a reality
sensor configuration
φ37 x 58 45g : GOA-40D-4 / GOA-40D-3
Oxygen sensorG
This galvanic cell sensor that measures oxygen concentration has been in use since the mid-1960s to detect (and alert) oxygen deficiency throughout all industries.
- No technical expertise is necessary
- Compact and lightweight
- Outstanding performance with instant real-time measurement
- Oxygen metre of intrinsically safe explosion-proof design
- No electric power is necessary to operate the sensor
- Low-priced oxygen metres are now a reality
sensor configuration
φ36 x 38 21g : GOH-1A / GOC-1A
Oxygen sensorCE
This galvanic cell sensor that measures oxygen concentration has been in use since the mid-1960s to detect (and alert) oxygen deficiency throughout all industries.
- No technical expertise is necessary
- Compact and lightweight
- Outstanding performance with instant real-time measurement
- Oxygen metre of intrinsically safe explosion-proof design
- No electric power is necessary to operate the sensor
- Low-priced oxygen metres are now a reality
sensor configuration
φ36 x 38 110g : GO-25C-2
Oxygen sensorKS
This galvanic cell sensor that measures oxygen concentration has been in use since the mid-1960s to detect (and alert) oxygen deficiency throughout all industries.
- No technical expertise is necessary
- Compact and lightweight
- Outstanding performance with instant real-time measurement
- Oxygen metre of intrinsically safe explosion-proof design
- No electric power is necessary to operate the sensor
- Low-priced oxygen metres are now a reality
sensor configuration
20 x 20 x 43 21g : GO-25KS
Carbon monoxide sensorCO-60AE
From the mid-1960s, controlled potential electrolysis type sensors have attracted much attention as a means for sensing and measuring air pollutants such as sulphur dioxide and nitrogen oxide right at the source where they are generated and they are increasingly being used in such contents. In the latter half of the 1970s, they came to be more widely accepted as carbon monoxide or hydrogen sulphide measuring instruments alongside other combustion type or galvanic sensors; not only for flue gas monitoring or occupational hygiene and safety applications.
Entering the 1980s, amid technical progress and development of new industries, the trend was towards enhanced sensitivity of existing sensors which was proactively pursued while the application range was also expanded greatly as sensors were developed for unusual gases, acidic gas, halogen, etc.
- An extremely wide range of gases can be sensed and measured
- High susceptibility to interference by similar gases, making individual measurement of gases of the same family quite difficult at times
- Selectivity can be enhanced by changing the electric potential, the electrode material, and the electrolyte solution
φ15 x 14 3g : CM-8A
Carbon monoxide sensorCO-608E
From the mid-1960s, controlled potential electrolysis type sensors have attracted much attention as a means for sensing and measuring air pollutants such as sulphur dioxide and nitrogen oxide right at the source where they are generated and they are increasingly being used in such contents. In the latter half of the 1970s, they came to be more widely accepted as carbon monoxide or hydrogen sulphide measuring instruments alongside other combustion type or galvanic sensors; not only for flue gas monitoring or occupational hygiene and safety applications.
Entering the 1980s, amid technical progress and development of new industries, the trend was towards enhanced sensitivity of existing sensors which was proactively pursued while the application range was also expanded greatly as sensors were developed for unusual gases, acidic gas, halogen, etc.
- An extremely wide range of gases can be sensed and measured
- High susceptibility to interference by similar gases, making individual measurement of gases of the same family quite difficult at times
- Selectivity can be enhanced by changing the electric potential, the electrode material, and the electrolyte solution
φ15 x 14 x 20 3g : GOC-100,GOC-100-2
Carbon monoxide sensorCO-607E
From the mid-1960s, controlled potential electrolysis type sensors have attracted much attention as a means for sensing and measuring air pollutants such as sulphur dioxide and nitrogen oxide right at the source where they are generated and they are increasingly being used in such contents. In the latter half of the 1970s, they came to be more widely accepted as carbon monoxide or hydrogen sulphide measuring instruments alongside other combustion type or galvanic sensors; not only for flue gas monitoring or occupational hygiene and safety applications.
Entering the 1980s, amid technical progress and development of new industries, the trend was towards enhanced sensitivity of existing sensors which was proactively pursued while the application range was also expanded greatly as sensors were developed for unusual gases, acidic gas, halogen, etc.
- An extremely wide range of gases can be sensed and measured
- High susceptibility to interference by similar gases, making individual measurement of gases of the same family quite difficult at times
- Selectivity can be enhanced by changing the electric potential, the electrode material, and the electrolyte solution
15 x 14 3g : GOT-110A / GOT-110A-2
Carbon monoxide sensorCO-604E
From the mid-1960s, controlled potential electrolysis type sensors have attracted much attention as a means for sensing and measuring air pollutants such as sulphur dioxide and nitrogen oxide right at the source where they are generated and they are increasingly being used in such contents. In the latter half of the 1970s, they came to be more widely accepted as carbon monoxide or hydrogen sulphide measuring instruments alongside other combustion type or galvanic sensors; not only for flue gas monitoring or occupational hygiene and safety applications.
Entering the 1980s, amid technical progress and development of new industries, the trend was towards enhanced sensitivity of existing sensors which was proactively pursued while the application range was also expanded greatly as sensors were developed for unusual gases, acidic gas, halogen, etc.
- An extremely wide range of gases can be sensed and measured
- High susceptibility to interference by similar gases, making individual measurement of gases of the same family quite difficult at times
- Selectivity can be enhanced by changing the electric potential, the electrode material, and the electrolyte solution
φ19 x 31 7g : CM-6B / CM7B
Carbon monoxide sensorCO-603E
From the mid-1960s, controlled potential electrolysis type sensors have attracted much attention as a means for sensing and measuring air pollutants such as sulphur dioxide and nitrogen oxide right at the source where they are generated and they are increasingly being used in such contents. In the latter half of the 1970s, they came to be more widely accepted as carbon monoxide or hydrogen sulphide measuring instruments alongside other combustion type or galvanic sensors; not only for flue gas monitoring or occupational hygiene and safety applications.
Entering the 1980s, amid technical progress and development of new industries, the trend was towards enhanced sensitivity of existing sensors which was proactively pursued while the application range was also expanded greatly as sensors were developed for unusual gases, acidic gas, halogen, etc.
- An extremely wide range of gases can be sensed and measured
- High susceptibility to interference by similar gases, making individual measurement of gases of the same family quite difficult at times
- Selectivity can be enhanced by changing the electric potential, the electrode material, and the electrolyte solution
33 x 30 x 36 17g : GOMHC-3A etc
Carbon monoxide sensorCO-529E
From the mid-1960s, controlled potential electrolysis type sensors have attracted much attention as a means for sensing and measuring air pollutants such as sulphur dioxide and nitrogen oxide right at the source where they are generated and they are increasingly being used in such contents. In the latter half of the 1970s, they came to be more widely accepted as carbon monoxide or hydrogen sulphide measuring instruments alongside other combustion type or galvanic sensors; not only for flue gas monitoring or occupational hygiene and safety applications.
Entering the 1980s, amid technical progress and development of new industries, the trend was towards enhanced sensitivity of existing sensors which was proactively pursued while the application range was also expanded greatly as sensors were developed for unusual gases, acidic gas, halogen, etc.
- An extremely wide range of gases can be sensed and measured
- High susceptibility to interference by similar gases, making individual measurement of gases of the same family quite difficult at times
- Selectivity can be enhanced by changing the electric potential, the electrode material, and the electrolyte solution
30 x 26 x 32 30g : CMCD-200
Carbon monoxide sensorCMF-D
From the mid-1960s, controlled potential electrolysis type sensors have attracted much attention as a means for sensing and measuring air pollutants such as sulphur dioxide and nitrogen oxide right at the source where they are generated and they are increasingly being used in such contents. In the latter half of the 1970s, they came to be more widely accepted as carbon monoxide or hydrogen sulphide measuring instruments alongside other combustion type or galvanic sensors; not only for flue gas monitoring or occupational hygiene and safety applications.
Entering the 1980s, amid technical progress and development of new industries, the trend was towards enhanced sensitivity of existing sensors which was proactively pursued while the application range was also expanded greatly as sensors were developed for unusual gases, acidic gas, halogen, etc.
- An extremely wide range of gases can be sensed and measured
- High susceptibility to interference by similar gases, making individual measurement of gases of the same family quite difficult at times
- Selectivity can be enhanced by changing the electric potential, the electrode material, and the electrolyte solution
32 x 26 x 75 80g : Fixed type
Carbon monoxide sensorCO-606E
From the mid-1960s, controlled potential electrolysis type sensors have attracted much attention as a means for sensing and measuring air pollutants such as sulphur dioxide and nitrogen oxide right at the source where they are generated and they are increasingly being used in such contents. In the latter half of the 1970s, they came to be more widely accepted as carbon monoxide or hydrogen sulphide measuring instruments alongside other combustion type or galvanic sensors; not only for flue gas monitoring or occupational hygiene and safety applications.
Entering the 1980s, amid technical progress and development of new industries, the trend was towards enhanced sensitivity of existing sensors which was proactively pursued while the application range was also expanded greatly as sensors were developed for unusual gases, acidic gas, halogen, etc.
- An extremely wide range of gases can be sensed and measured
- High susceptibility to interference by similar gases, making individual measurement of gases of the same family quite difficult at times
- Selectivity can be enhanced by changing the electric potential, the electrode material, and the electrolyte solution
18.2 x 18.3 4g : CM-7A
Carbon monoxide sensorCO-601E
From the mid-1960s, controlled potential electrolysis type sensors have attracted much attention as a means for sensing and measuring air pollutants such as sulphur dioxide and nitrogen oxide right at the source where they are generated and they are increasingly being used in such contents. In the latter half of the 1970s, they came to be more widely accepted as carbon monoxide or hydrogen sulphide measuring instruments alongside other combustion type or galvanic sensors; not only for flue gas monitoring or occupational hygiene and safety applications.
Entering the 1980s, amid technical progress and development of new industries, the trend was towards enhanced sensitivity of existing sensors which was proactively pursued while the application range was also expanded greatly as sensors were developed for unusual gases, acidic gas, halogen, etc.
- An extremely wide range of gases can be sensed and measured
- High susceptibility to interference by similar gases, making individual measurement of gases of the same family quite difficult at times
- Selectivity can be enhanced by changing the electric potential, the electrode material, and the electrolyte solution
φ18 x 20 4g : CM-6A-2 / CM-6A
Carbon monoxide sensorCO-505E
From the mid-1960s, controlled potential electrolysis type sensors have attracted much attention as a means for sensing and measuring air pollutants such as sulphur dioxide and nitrogen oxide right at the source where they are generated and they are increasingly being used in such contents. In the latter half of the 1970s, they came to be more widely accepted as carbon monoxide or hydrogen sulphide measuring instruments alongside other combustion type or galvanic sensors; not only for flue gas monitoring or occupational hygiene and safety applications.
Entering the 1980s, amid technical progress and development of new industries, the trend was towards enhanced sensitivity of existing sensors which was proactively pursued while the application range was also expanded greatly as sensors were developed for unusual gases, acidic gas, halogen, etc.
- An extremely wide range of gases can be sensed and measured
- High susceptibility to interference by similar gases, making individual measurement of gases of the same family quite difficult at times
- Selectivity can be enhanced by changing the electric potential, the electrode material, and the electrolyte solution
37 x 42 x 32 45g : GOC-1A
Carbon monoxide sensorCO-50AE
From the mid-1960s, controlled potential electrolysis type sensors have attracted much attention as a means for sensing and measuring air pollutants such as sulphur dioxide and nitrogen oxide right at the source where they are generated and they are increasingly being used in such contents. In the latter half of the 1970s, they came to be more widely accepted as carbon monoxide or hydrogen sulphide measuring instruments alongside other combustion type or galvanic sensors; not only for flue gas monitoring or occupational hygiene and safety applications.
Entering the 1980s, amid technical progress and development of new industries, the trend was towards enhanced sensitivity of existing sensors which was proactively pursued while the application range was also expanded greatly as sensors were developed for unusual gases, acidic gas, halogen, etc.
- An extremely wide range of gases can be sensed and measured
- High susceptibility to interference by similar gases, making individual measurement of gases of the same family quite difficult at times
- Selectivity can be enhanced by changing the electric potential, the electrode material, and the electrolyte solution
30 x 36 x 32 30g : CM-5B
Carbon monoxide sensorCO-51EE
From the mid-1960s, controlled potential electrolysis type sensors have attracted much attention as a means for sensing and measuring air pollutants such as sulphur dioxide and nitrogen oxide right at the source where they are generated and they are increasingly being used in such contents. In the latter half of the 1970s, they came to be more widely accepted as carbon monoxide or hydrogen sulphide measuring instruments alongside other combustion type or galvanic sensors; not only for flue gas monitoring or occupational hygiene and safety applications.
Entering the 1980s, amid technical progress and development of new industries, the trend was towards enhanced sensitivity of existing sensors which was proactively pursued while the application range was also expanded greatly as sensors were developed for unusual gases, acidic gas, halogen, etc.
- An extremely wide range of gases can be sensed and measured
- High susceptibility to interference by similar gases, making individual measurement of gases of the same family quite difficult at times
- Selectivity can be enhanced by changing the electric potential, the electrode material, and the electrolyte solution
30 x 36 x 32 30g : CMCD-11
Carbon monoxide sensorCO-501E
From the mid-1960s, controlled potential electrolysis type sensors have attracted much attention as a means for sensing and measuring air pollutants such as sulphur dioxide and nitrogen oxide right at the source where they are generated and they are increasingly being used in such contents. In the latter half of the 1970s, they came to be more widely accepted as carbon monoxide or hydrogen sulphide measuring instruments alongside other combustion type or galvanic sensors; not only for flue gas monitoring or occupational hygiene and safety applications.
Entering the 1980s, amid technical progress and development of new industries, the trend was towards enhanced sensitivity of existing sensors which was proactively pursued while the application range was also expanded greatly as sensors were developed for unusual gases, acidic gas, halogen, etc.
- An extremely wide range of gases can be sensed and measured
- High susceptibility to interference by similar gases, making individual measurement of gases of the same family quite difficult at times
- Selectivity can be enhanced by changing the electric potential, the electrode material, and the electrolyte solution
50 x 75 x 35 75g : CM-525HB
Carbon monoxide sensorCO-503E
From the mid-1960s, controlled potential electrolysis type sensors have attracted much attention as a means for sensing and measuring air pollutants such as sulphur dioxide and nitrogen oxide right at the source where they are generated and they are increasingly being used in such contents. In the latter half of the 1970s, they came to be more widely accepted as carbon monoxide or hydrogen sulphide measuring instruments alongside other combustion type or galvanic sensors; not only for flue gas monitoring or occupational hygiene and safety applications.
Entering the 1980s, amid technical progress and development of new industries, the trend was towards enhanced sensitivity of existing sensors which was proactively pursued while the application range was also expanded greatly as sensors were developed for unusual gases, acidic gas, halogen, etc.
- An extremely wide range of gases can be sensed and measured
- High susceptibility to interference by similar gases, making individual measurement of gases of the same family quite difficult at times
- Selectivity can be enhanced by changing the electric potential, the electrode material, and the electrolyte solution
50 x 75 x 35 75g : CM-525LB
Carbon monoxide sensorCM-105B
From the mid-1960s, controlled potential electrolysis type sensors have attracted much attention as a means for sensing and measuring air pollutants such as sulphur dioxide and nitrogen oxide right at the source where they are generated and they are increasingly being used in such contents. In the latter half of the 1970s, they came to be more widely accepted as carbon monoxide or hydrogen sulphide measuring instruments alongside other combustion type or galvanic sensors; not only for flue gas monitoring or occupational hygiene and safety applications.
Entering the 1980s, amid technical progress and development of new industries, the trend was towards enhanced sensitivity of existing sensors which was proactively pursued while the application range was also expanded greatly as sensors were developed for unusual gases, acidic gas, halogen, etc.
- An extremely wide range of gases can be sensed and measured
- High susceptibility to interference by similar gases, making individual measurement of gases of the same family quite difficult at times
- Selectivity can be enhanced by changing the electric potential, the electrode material, and the electrolyte solution
20 x 36 x 45 24g : CM-600
Carbon monoxide sensorCM-105B-H
From the mid-1960s, controlled potential electrolysis type sensors have attracted much attention as a means for sensing and measuring air pollutants such as sulphur dioxide and nitrogen oxide right at the source where they are generated and they are increasingly being used in such contents. In the latter half of the 1970s, they came to be more widely accepted as carbon monoxide or hydrogen sulphide measuring instruments alongside other combustion type or galvanic sensors; not only for flue gas monitoring or occupational hygiene and safety applications.
Entering the 1980s, amid technical progress and development of new industries, the trend was towards enhanced sensitivity of existing sensors which was proactively pursued while the application range was also expanded greatly as sensors were developed for unusual gases, acidic gas, halogen, etc.
- An extremely wide range of gases can be sensed and measured
- High susceptibility to interference by similar gases, making individual measurement of gases of the same family quite difficult at times
- Selectivity can be enhanced by changing the electric potential, the electrode material, and the electrolyte solution
20 x 36 x 45 24g : CM-6000
Hydrogen sulphide sensorH2S-604E
From the mid-1960s, controlled potential electrolysis type sensors have attracted much attention as a means for sensing and measuring air pollutants such as sulphur dioxide and nitrogen oxide right at the source where they are generated and they are increasingly being used in such contents. In the latter half of the 1970s, they came to be more widely accepted as carbon monoxide or hydrogen sulphide measuring instruments alongside other combustion type or galvanic sensors; not only for flue gas monitoring or occupational hygiene and safety applications.
Entering the 1980s, amid technical progress and development of new industries, the trend was towards enhanced sensitivity of existing sensors which was proactively pursued while the application range was also expanded greatly as sensors were developed for unusual gases, acidic gas, halogen, etc.
- An extremely wide range of gases can be sensed and measured
- High susceptibility to interference by similar gases, making individual measurement of gases of the same family quite difficult at times
- Selectivity can be enhanced by changing the electric potential, the electrode material, and the electrolyte solution
φ19 x 31 7g : HS-6A / HS-7A
Hydrogen sulphide sensorH2S-605E
From the mid-1960s, controlled potential electrolysis type sensors have attracted much attention as a means for sensing and measuring air pollutants such as sulphur dioxide and nitrogen oxide right at the source where they are generated and they are increasingly being used in such contents. In the latter half of the 1970s, they came to be more widely accepted as carbon monoxide or hydrogen sulphide measuring instruments alongside other combustion type or galvanic sensors; not only for flue gas monitoring or occupational hygiene and safety applications.
Entering the 1980s, amid technical progress and development of new industries, the trend was towards enhanced sensitivity of existing sensors which was proactively pursued while the application range was also expanded greatly as sensors were developed for unusual gases, acidic gas, halogen, etc.
- An extremely wide range of gases can be sensed and measured
- High susceptibility to interference by similar gases, making individual measurement of gases of the same family quite difficult at times
- Selectivity can be enhanced by changing the electric potential, the electrode material, and the electrolyte solution
15 x 14 3g : GOT-110B / GOT-110B-2
Hydrogen sulphide sensorH2S-603E
From the mid-1960s, controlled potential electrolysis type sensors have attracted much attention as a means for sensing and measuring air pollutants such as sulphur dioxide and nitrogen oxide right at the source where they are generated and they are increasingly being used in such contents. In the latter half of the 1970s, they came to be more widely accepted as carbon monoxide or hydrogen sulphide measuring instruments alongside other combustion type or galvanic sensors; not only for flue gas monitoring or occupational hygiene and safety applications.
Entering the 1980s, amid technical progress and development of new industries, the trend was towards enhanced sensitivity of existing sensors which was proactively pursued while the application range was also expanded greatly as sensors were developed for unusual gases, acidic gas, halogen, etc.
- An extremely wide range of gases can be sensed and measured
- High susceptibility to interference by similar gases, making individual measurement of gases of the same family quite difficult at times
- Selectivity can be enhanced by changing the electric potential, the electrode material, and the electrolyte solution
33 x 30 x 36 17g : GOMHC-3A
Hydrogen sulphide sensorHS-10
From the mid-1960s, controlled potential electrolysis type sensors have attracted much attention as a means for sensing and measuring air pollutants such as sulphur dioxide and nitrogen oxide right at the source where they are generated and they are increasingly being used in such contents. In the latter half of the 1970s, they came to be more widely accepted as carbon monoxide or hydrogen sulphide measuring instruments alongside other combustion type or galvanic sensors; not only for flue gas monitoring or occupational hygiene and safety applications.
Entering the 1980s, amid technical progress and development of new industries, the trend was towards enhanced sensitivity of existing sensors which was proactively pursued while the application range was also expanded greatly as sensors were developed for unusual gases, acidic gas, halogen, etc.
- An extremely wide range of gases can be sensed and measured
- High susceptibility to interference by similar gases, making individual measurement of gases of the same family quite difficult at times
- Selectivity can be enhanced by changing the electric potential, the electrode material, and the electrolyte solution
76 x 60 x 57 95g : HSS-1050HL
Hydrogen sulphide sensorHS-100
From the mid-1960s, controlled potential electrolysis type sensors have attracted much attention as a means for sensing and measuring air pollutants such as sulphur dioxide and nitrogen oxide right at the source where they are generated and they are increasingly being used in such contents. In the latter half of the 1970s, they came to be more widely accepted as carbon monoxide or hydrogen sulphide measuring instruments alongside other combustion type or galvanic sensors; not only for flue gas monitoring or occupational hygiene and safety applications.
Entering the 1980s, amid technical progress and development of new industries, the trend was towards enhanced sensitivity of existing sensors which was proactively pursued while the application range was also expanded greatly as sensors were developed for unusual gases, acidic gas, halogen, etc.
- An extremely wide range of gases can be sensed and measured
- High susceptibility to interference by similar gases, making individual measurement of gases of the same family quite difficult at times
- Selectivity can be enhanced by changing the electric potential, the electrode material, and the electrolyte solution
76 x 60 x 57 95g : HSS-1050HL
Hydrogen sulphide sensorH2S-501E
From the mid-1960s, controlled potential electrolysis type sensors have attracted much attention as a means for sensing and measuring air pollutants such as sulphur dioxide and nitrogen oxide right at the source where they are generated and they are increasingly being used in such contents. In the latter half of the 1970s, they came to be more widely accepted as carbon monoxide or hydrogen sulphide measuring instruments alongside other combustion type or galvanic sensors; not only for flue gas monitoring or occupational hygiene and safety applications.
Entering the 1980s, amid technical progress and development of new industries, the trend was towards enhanced sensitivity of existing sensors which was proactively pursued while the application range was also expanded greatly as sensors were developed for unusual gases, acidic gas, halogen, etc.
- An extremely wide range of gases can be sensed and measured
- High susceptibility to interference by similar gases, making individual measurement of gases of the same family quite difficult at times
- Selectivity can be enhanced by changing the electric potential, the electrode material, and the electrolyte solution
50 x 75 x 35 75g : HS-1050
Hydrogen sulphide sensorH2S-520E/H2S-521E/H2S-522E/H2S-523E/H2S-524E
From the mid-1960s, controlled potential electrolysis type sensors have attracted much attention as a means for sensing and measuring air pollutants such as sulphur dioxide and nitrogen oxide right at the source where they are generated and they are increasingly being used in such contents. In the latter half of the 1970s, they came to be more widely accepted as carbon monoxide or hydrogen sulphide measuring instruments alongside other combustion type or galvanic sensors; not only for flue gas monitoring or occupational hygiene and safety applications.
Entering the 1980s, amid technical progress and development of new industries, the trend was towards enhanced sensitivity of existing sensors which was proactively pursued while the application range was also expanded greatly as sensors were developed for unusual gases, acidic gas, halogen, etc.
- An extremely wide range of gases can be sensed and measured
- High susceptibility to interference by similar gases, making individual measurement of gases of the same family quite difficult at times
- Selectivity can be enhanced by changing the electric potential, the electrode material, and the electrolyte solution
30 x 30 x 26 25g : GHS-8AT
Hydrogen sulphide sensorH2S-502E
From the mid-1960s, controlled potential electrolysis type sensors have attracted much attention as a means for sensing and measuring air pollutants such as sulphur dioxide and nitrogen oxide right at the source where they are generated and they are increasingly being used in such contents. In the latter half of the 1970s, they came to be more widely accepted as carbon monoxide or hydrogen sulphide measuring instruments alongside other combustion type or galvanic sensors; not only for flue gas monitoring or occupational hygiene and safety applications.
Entering the 1980s, amid technical progress and development of new industries, the trend was towards enhanced sensitivity of existing sensors which was proactively pursued while the application range was also expanded greatly as sensors were developed for unusual gases, acidic gas, halogen, etc.
- An extremely wide range of gases can be sensed and measured
- High susceptibility to interference by similar gases, making individual measurement of gases of the same family quite difficult at times
- Selectivity can be enhanced by changing the electric potential, the electrode material, and the electrolyte solution
37 x 42 x 30 45g : GOH-1A
Hydrogen sulphide sensorH2S-50EE
From the mid-1960s, controlled potential electrolysis type sensors have attracted much attention as a means for sensing and measuring air pollutants such as sulphur dioxide and nitrogen oxide right at the source where they are generated and they are increasingly being used in such contents. In the latter half of the 1970s, they came to be more widely accepted as carbon monoxide or hydrogen sulphide measuring instruments alongside other combustion type or galvanic sensors; not only for flue gas monitoring or occupational hygiene and safety applications.
Entering the 1980s, amid technical progress and development of new industries, the trend was towards enhanced sensitivity of existing sensors which was proactively pursued while the application range was also expanded greatly as sensors were developed for unusual gases, acidic gas, halogen, etc.
- An extremely wide range of gases can be sensed and measured
- High susceptibility to interference by similar gases, making individual measurement of gases of the same family quite difficult at times
- Selectivity can be enhanced by changing the electric potential, the electrode material, and the electrolyte solution
30 x 30 x 26 25g : HS-5C
Flammable gas sensorFG-3A
Catalytic combustion sensors are classified according to the method employed to measure combustible gas, and they have come to be widely used to prevent methane explosions in coal mines from about 1959. Since then, they have been improved considerably and are now more widely used throughout various industrial sectors as reliable sensors.
- Accuracy and reproducibility are excellent
- Low power consumption allows devices to be more compact
- Hardly affected by ambient temperature and humidity
- The output curve (to just short of the explosion threshold) is almost a straight line
33 x 30 x 36 30g : MA-2510 / GOM-3A / GOMHC-3A
Flammable gas sensorFG-3AL
Catalytic combustion sensors are classified according to the method employed to measure combustible gas, and they have come to be widely used to prevent methane explosions in coal mines from about 1959. Since then, they have been improved considerably and are now more widely used throughout various industrial sectors as reliable sensors.
- Accuracy and reproducibility are excellent
- Low power consumption allows devices to be more compact
- Hardly affected by ambient temperature and humidity
- The output curve (to just short of the explosion threshold) is almost a straight line
33 x 30 x 36 30g : MA-0510 / GOM-3AL
Carbon monoxide sensorCO-801E
From the mid-1960s, controlled potential electrolysis type sensors have attracted much attention as a means for sensing and measuring air pollutants such as sulphur dioxide and nitrogen oxide right at the source where they are generated and they are increasingly being used in such contents. In the latter half of the 1970s, they came to be more widely accepted as carbon monoxide or hydrogen sulphide measuring instruments alongside other combustion type or galvanic sensors; not only for flue gas monitoring or occupational hygiene and safety applications.
Entering the 1980s, amid technical progress and development of new industries, the trend was towards enhanced sensitivity of existing sensors which was proactively pursued while the application range was also expanded greatly as sensors were developed for unusual gases, acidic gas, halogen, etc.
- An extremely wide range of gases can be sensed and measured
- High susceptibility to interference by similar gases, making individual measurement of gases of the same family quite difficult at times
- Selectivity can be enhanced by changing the electric potential, the electrode material, and the electrolyte solution
φ15 x 14 3g : GOC-200
Carbon dioxide sensor CO2-104R
Non-Dispersive Infrared Absorption Sensors
30 x 30 x 100 25g : CMCD-200
