ELECTROMAGNETIC DOSING PUMPS
Pumps for horizontal installation
PROXIMA PSP161 – MULTI-FUNCTION PUMP, WITH STROKE ADJUSTMENT
ROXIMA PSP161 is a professional electromagnetic pump, with multi-function electronics and high-level hydraulics.
It is equipped with mechanical adjustment of the stroke length (dosing volume), an internal system for anti-overheating safety , a dosing chamber built to prevent liquid leakage towards the magnet and a series of advanced functions, both standard and optional.
Available in different flow options , with dosing head in PVDF (standard) or methacrylate, also with self-bleeding valve , and models for dosing medium or high viscosity liquids.
Built for horizontal installation, it can also be mounted on the wall, using the appropriate bracket with rotating shelf .
Supplied with installation kit, including hoses, injection valve and foot filter.
Pump type
- Multi-function pump with pulse and mA inputs
- Working mode: constant, pulse control with dosage proportional to the flow rate or automatic calculation (ppm, %, ml/q); command from analogue input 0/40-20 mA; batch mode ; break-work cycle
- Supplied with suction, delivery and drain hoses (standard in PVC / PE, on request in PTFE); injection valve and bottom filter in PVDF with PTFE seals
Electronic features- Multi-lingual interface (Italian, English, Spanish, French, German)
- Two levels of password-protected programming
- Multi-voltage power supply 100 … 240 V~ 50/60 Hz, standard cable with Schuko plug
- Internal clock for programmed dosing at defined days and times
- Meters of liters injected, shots and working hours of the membrane
- “Service” menu
- “Autoset” function for quick configuration of the working mode
- Standard digital inputs for external consent and level control
- Available options:
- Input for injection flow control with Flow Control sensor and self-priming function
- Alarm relay or pulse repetition
- RS485 serial port , alternative to the relay, with galvanic separation and Modbus RTU communication protocol
Hydraulic characteristics- PVDF head; multi-layer membrane with part in contact with the liquid in PTFE; valves with PVDF body and ceramic balls; PTFE seals (FPM and EPDM)
- Available options:
- PVDF dosing head with 2-way self-bleeding valve
- Valves with spring for dosing medium viscous liquids
- Special head for high viscosity products , up to 3000 cP
- Reinforced “full PTFE” diaphragm
- PTFE ball valves for applications with aggressive substances
- Methacrylate head, also in 3-way self-bleeding version
PROXIMA PSP162 – PUMP WITH PH/RX INSTRUMENT AND STROKE ADJUSTMENT
PROXIMA PSP162 is a professional electromagnetic pump, with integrated pH/RX instrument and high-level hydraulics.
It is equipped with mechanical adjustment of the stroke length (dosing volume), an internal system for anti-overheating safety , a dosing chamber built to prevent liquid leakage towards the magnet and a series of advanced functions, both standard and optional.
Available in different flow options , with dosing head in PVDF (standard) or methacrylate, also with self-bleeding valve, and models for dosing medium or high viscosity liquids.
Built for horizontal installation, it can also be mounted on the wall, using the appropriate bracket with rotating shelf .
Supplied with installation kit, including hoses, injection valve and foot filter.
Pump type
- Dosing pump with integrated pH/RX instrument
- Sensor input on BNC connector
- Supplied with suction, delivery and drain hoses (standard in PVC / PE, on request in PTFE); injection valve and bottom filter in PVDF with PTFE seals
Electronic features- Multi-lingual interface (Italian, English, Spanish, French, German)
- Two levels of password-protected programming
- Multi-voltage power supply 100 … 240 V~ 50/60 Hz, standard cable with Schuko plug
- Internal clock for programmed dosing at defined days and times
- Meters of liters injected, shots and working hours of the membrane
- “Service” menu
- “Autoset” function for quick configuration of the working mode
- Standard digital inputs for external consent and level control
- Available options:
- Input for injection flow control with Flow Control sensor and self-priming function
- Alarm relay or pulse repetition
- RS485 serial port , alternative to the relay, with galvanic separation and Modbus RTU communication protocol
Hydraulic characteristics- PVDF head; multi-layer membrane with part in contact with the liquid in PTFE; valves with PVDF body and ceramic balls; PTFE seals (FPM and EPDM)
- Available options:
- PVDF dosing head with 2-way self-bleeding valve
- Valves with spring for dosing medium viscous liquids
- Special head for high viscosity products , up to 3000 cP
- Reinforced “full PTFE” diaphragm
- PTFE ball valves for applications with aggressive substances
- Methacrylate head, also in 3-way self-bleeding version
PROXIMA PSP163 – PUMP WITH CHLORINE METER AND STROKE ADJUSTMENT
PROXIMA PSP163 is a professional electromagnetic pump, with high-level hydraulics and integrated instrument for measuring chlorine with open amperometric cell.
It is equipped with mechanical adjustment of the stroke length (dosing volume), an internal system for anti-overheating safety , a dosing chamber built to prevent liquid leakage towards the magnet and a series of advanced functions, both standard and optional.
Available in different flow options , with dosing head in PVDF (standard) or methacrylate, also with self-bleeding valve , and models for dosing medium or high viscosity liquids.
Built for horizontal installation, it can also be mounted on the wall, using the appropriate bracket with rotating shelf .
Supplied with installation kit, including hoses, injection valve and foot filter.
Pump type
- Dosing pump with integrated instrument for measuring chlorine
- Input for open amperometric cell , available on M8 connector
- Model PSP163A with input for CLE11/CLE12 cell; PSP163B model with input for CLE16
- Measurement scale 0-1 ppm or 0-5 ppm
- Supplied with suction, delivery and drain hoses (standard in PVC / PE, on request in PTFE); injection valve and bottom filter in PVDF with PTFE seals
Electronic features- Multi-lingual interface (Italian, English, Spanish, French, German)
- Two levels of password-protected programming
- Multi-voltage power supply 100 … 240 V~ 50/60 Hz, standard cable with Schuko plug
- Internal clock for programmed dosing at defined days and times
- Meters of liters injected, shots and working hours of the membrane
- “Service” menu
- “Autoset” function for quick configuration of the working mode
- Standard digital inputs for external consent and level control
- Available options:
- Input for injection flow control with Flow Control sensor and self-priming function
- Alarm relay or pulse repetition
- RS485 serial port , alternative to the relay, with galvanic separation and Modbus RTU communication protocol
Hydraulic characteristics- PVDF head; multi-layer membrane with part in contact with the liquid in PTFE; valves with PVDF body and ceramic balls; PTFE seals (FPM and EPDM)
- Available options:
- PVDF dosing head with 2-way self-bleeding valve
- Valves with spring for dosing medium viscous liquids
- Special head for high viscosity products , up to 3000 cP
- Reinforced “full PTFE” diaphragm
- PTFE ball valves for applications with aggressive substances
- Methacrylate head, also in 3-way self-bleeding version
PROXIMA PSP164 – PUMP WITH CONDUCTIVITY METER AND STROKE ADJUSTMENT
PROXIMA PSP164 is a professional electromagnetic pump, with high-level hydraulics and integrated instrument for measuring conductivity with a two-electrode cell.
It is equipped with mechanical adjustment of the stroke length (dosing volume), an internal system for anti-overheating safety , a dosing chamber built to prevent liquid leakage towards the magnet and a series of advanced functions, both standard and optional.
Available in different flow options , with dosing head in PVDF (standard) or methacrylate, also with self-bleeding valve , and models for dosing medium or high viscosity liquids.
Built for horizontal installation, it can also be mounted on the wall, using the appropriate bracket with rotating shelf .
Supplied with installation kit, including hoses, injection valve and foot filter.
Pump type
- Dosing pump with integrated instrument for measuring conductivity
- Input for two electrode cell on M8 connector, also with integrated NTC sensor
- Supplied with suction, delivery and drain hoses (standard in PVC / PE, on request in PTFE); injection valve and bottom filter in PVDF with PTFE seals
Electronic features- Multi-lingual interface (Italian, English, Spanish, French, German)
- Two levels of password-protected programming
- Multi-voltage power supply 100 … 240 V~ 50/60 Hz, standard cable with Schuko plug
- Internal clock for programmed dosing at defined days and times
- Meters of liters injected, shots and working hours of the membrane
- “Service” menu
- “Autoset” function for quick configuration of the working mode
- Standard digital inputs for external consent and level control
- Available options:
- Input for injection flow control with Flow Control sensor and self-priming function
- Alarm relay or pulse repetition
- RS485 serial port , alternative to the relay, with galvanic separation and Modbus RTU communication protocol
Hydraulic characteristics- PVDF head; multi-layer membrane with part in contact with the liquid in PTFE; valves with PVDF body and ceramic balls; PTFE seals (FPM and EPDM)
- Available options:
- PVDF dosing head with 2-way self-bleeding valve
- Valves with spring for dosing medium viscous liquids
- Special head for high viscosity products , up to 3000 cP
- Reinforced “full PTFE” diaphragm
- PTFE ball valves for applications with aggressive substances
- Methacrylate head, also in 3-way self-bleeding version
