Electronic meter
- Photometer
- Reagents
- Electronic meter
- Comparator
- Mini-kits
- Flexi Tester
- Flexi Tester Kits
- Pool Tester
- Test Strips
- Bacteria Testing
- Incubators
FT11
Electronic pH Meter Accuracy: +/- 0.1 pH Calibration: 1 point manual Battery life: 3 x 1.5 V (1.000 h) Environment: 0 – 50°C, RH 100% Dimensions (weight): 153 x 24 mm (45g) Reference solution: 7.00 pH (20 ml sachet) Without requiring additional reagents (tablets, drops, etc.), the Electronic Meters offer an absolutely professional way to measure various water values; such as, for example, conductivity, salinity (total dissolved solids), and pH value. The established value is displayed on the device within seconds after dipping the device in sample liquid. The sensitive electrodes, however, should always be kept damp. They should becalibrated at regular intervals, preferably before each measurement, by using a reference fluid. Both the batteries and the electrodes can be changed. The working range of the Electronic Meter is between 0 – 50°C; depending on the model temperature can be compensated for by determining the measurement value.
FT34
Electronic TDS Meter (Total Dissolved Solids) Accuracy: +/- 2% FS Calibration: 1 point manual Battery life: 3 x 1.5 V (250 h) Environment: 0 – 50°C, RH 100% Dimensions (Weight): 153 x 24 mm (45g) Reference solution: 1500 TDS (20 ml sachet) Without requiring additional reagents (tablets, drops, etc.), the Electronic Meters offer an absolutely professional way to measure various water values; such as, for example, conductivity, salinity (total dissolved solids), and pH value. The established value is displayed on the device within seconds after dipping the device in sample liquid. The sensitive electrodes, however, should always be kept damp. They should becalibrated at regular intervals, preferably before each measurement, by using a reference fluid. Both the batteries and the electrodes can be changed. The working range of the Electronic Meter is between 0 – 50°C; depending on the model temperature can be compensated for by determining the measurement value.
FT36
Electronic TDS Meter (Total Dissolved Solids) Accuracy: +/- 2% FS Calibration: 1 point manual Battery life: 3 x 1.5 V (250 h) Environment: 0 – 50°C, RH 100% Dimensions (Weight): 153 x 24 mm (45g) Reference solution: 6.44 TDS (20 ml sachet) Without requiring additional reagents (tablets, drops, etc.), the Electronic Meters offer an absolutely professional way to measure various water values; such as, for example, conductivity, salinity (total dissolved solids), and pH value. The established value is displayed on the device within seconds after dipping the device in sample liquid. The sensitive electrodes, however, should always be kept damp. They should becalibrated at regular intervals, preferably before each measurement, by using a reference fluid. Both the batteries and the electrodes can be changed. The working range of the Electronic Meter is between 0 – 50°C; depending on the model temperature can be compensated for by determining the measurement value.
FT33
Electronic EC Meter (Electronic Conductivity) Accuracy: +/- 2% FS Calibration: 1 point manual Battery life: 3 x 1.5 V (250 h) Environment: 0 – 50°C, RH 100% Dimensions (Weight): 153 x 24 mm (45g) Reference solution: 1313 µS/cm (20 ml sachet) Without requiring additional reagents (tablets, drops, etc.), the Electronic Meters offer an absolutely professional way to measure various water values; such as, for example, conductivity, salinity (total dissolved solids), and pH value. The established value is displayed on the device within seconds after dipping the device in sample liquid. The sensitive electrodes, however, should always be kept damp. They should becalibrated at regular intervals, preferably before each measurement, by using a reference fluid. Both the batteries and the electrodes can be changed. The working range of the Electronic Meter is between 0 – 50°C; depending on the model temperature can be compensated for by determining the measurement value.
FT35
Electronic EC Meter (Electronic Conductivity) Accuracy: +/- 2% FS Calibration: 1 point manual Aut. Temp. Comp.: aut. (0 – 50°C / ß=2%/°C) Battery life: 3 x 1.5 V (250 h) Environment: 0 – 50°C, RH 100% Dimensions (Weight): 153 x 24 mm (45g) Reference solution: 12.88 mS/cm (20 ml sachet) pH-value (pH) Without requiring additional reagents (tablets, drops, etc.), the Electronic Meters offer an absolutely professional way to measure various water values; such as, for example, conductivity, salinity (total dissolved solids), and pH value. The established value is displayed on the device within seconds after dipping the device in sample liquid. The sensitive electrodes, however, should always be kept damp. They should becalibrated at regular intervals, preferably before each measurement, by using a reference fluid. Both the batteries and the electrodes can be changed. The working range of the Electronic Meter is between 0 – 50°C; depending on the model temperature can be compensated for by determining the measurement value.
FT6011
Electronic meter for determining the pH-value Without requiring additional reagents (tablets, drops, etc.), the Electronic Meters offer an absolutely professional way to measure various water values; such as, for example, conductivity, salinity (total dissolved solids), and pH value. The established value is displayed on the device within seconds after dipping the device in sample liquid. The sensitive electrodes, however, should always be kept damp. They should becalibrated at regular intervals, preferably before each measurement, by using a reference fluid. Both the batteries and the electrodes can be changed. The working range of the Electronic Meter is between 0 – 50°C; depending on the model temperature can be compensated for by determining the measurement value.
FT6012
Electronic meter for determining the pH-value Without requiring additional reagents (tablets, drops, etc.), the Electronic Meters offer an absolutely professional way to measure various water values; such as, for example, conductivity, salinity (total dissolved solids), and pH value. The established value is displayed on the device within seconds after dipping the device in sample liquid. The sensitive electrodes, however, should always be kept damp. They should becalibrated at regular intervals, preferably before each measurement, by using a reference fluid. Both the batteries and the electrodes can be changed. The working range of the Electronic Meter is between 0 – 50°C; depending on the model temperature can be compensated for by determining the measurement value.
FT7011
Electronic Meter pH-, ORP-(Redox) Temperature Without requiring additional reagents (tablets, drops, etc.), the Electronic Meters offer an absolutely professional way to measure various water values; such as, for example, conductivity, salinity (total dissolved solids), and pH value. The established value is displayed on the device within seconds after dipping the device in sample liquid. The sensitive electrodes, however, should always be kept damp. They should becalibrated at regular intervals, preferably before each measurement, by using a reference fluid. Both the batteries and the electrodes can be changed. The working range of the Electronic Meter is between 0 – 50°C; depending on the model temperature can be compensated for by determining the measurement value.
FT7021
Electronic Meter EC, TDS, Salt Temperature Without requiring additional reagents (tablets, drops, etc.), the Electronic Meters offer an absolutely professional way to measure various water values; such as, for example, conductivity, salinity (total dissolved solids), and pH value. The established value is displayed on the device within seconds after dipping the device in sample liquid. The sensitive electrodes, however, should always be kept damp. They should becalibrated at regular intervals, preferably before each measurement, by using a reference fluid. Both the batteries and the electrodes can be changed. The working range of the Electronic Meter is between 0 – 50°C; depending on the model temperature can be compensated for by determining the measurement value.
FT7031
Electronic Meter DO, O2, Temperature Without requiring additional reagents (tablets, drops, etc.), the Electronic Meters offer an absolutely professional way to measure various water values; such as, for example, conductivity, salinity (total dissolved solids), and pH value. The established value is displayed on the device within seconds after dipping the device in sample liquid. The sensitive electrodes, however, should always be kept damp. They should becalibrated at regular intervals, preferably before each measurement, by using a reference fluid. Both the batteries and the electrodes can be changed. The working range of the Electronic Meter is between 0 – 50°C; depending on the model temperature can be compensated for by determining the measurement value.
FT7200
Electronic Meter pH, ORP, EC, TDS, Salt Temperature Without requiring additional reagents (tablets, drops, etc.), the Electronic Meters offer an absolutely professional way to measure various water values; such as, for example, conductivity, salinity (total dissolved solids), and pH value. The established value is displayed on the device within seconds after dipping the device in sample liquid. The sensitive electrodes, however, should always be kept damp. They should becalibrated at regular intervals, preferably before each measurement, by using a reference fluid. Both the batteries and the electrodes can be changed. The working range of the Electronic Meter is between 0 – 50°C; depending on the model temperature can be compensated for by determining the measurement value.
