Mycotoxin Test Kits
AgraStrip® lateral flow devices
AgraStrip® Lateral Flow Devices
AgraStrip® Aflatoxin WATEX® Quantitative Tests
AgraStrip® Deoxynivalenol WATEX® Quantitative Tests
AgraStrip® Fumonisin WATEX® Quantitative Tests
AgraStrip® Total Aflatoxin Qualitative Tests
AgraStrip® Zearalenone WATEX® Quantitative Tests
AgraStrip® Ochratoxin A WATEX® Quantitative Tests
AgraStrip® Pro Total Aflatoxin WATEX®
AgraStrip® Pro Deoxynivalenol WATEX®
AgraStrip® Pro Total Fumonisin WATEX®
AgraStrip® Pro Zearalenone WATEX®
AgraStrip® Pro Ochratoxin A WATEX®
AgraStrip® Pro T-2/HT-2 WATEX®
AgraVision Pro Reader
AgraVision™ Pro Printer
AgraVision™ Pro Scanner
AgraStrip® Aflatoxin WATEX® Quantitative Tests
The AgraStrip® WATEX® test kits are ready-to-use lateral flow devices (LFD) for on-site testing. These allow a rapid analysis of a wide range of food and feed samples with an assay time of 3 minutes. The eco-friendly One for All WATEX extraction makes the analysis of multiple mycotoxins possible from only a single water-based sample extract. The test kits are available in a quantitative format and are used with the AgraVision™ reader, to provide objective results and secure a consistent results documentation.
Item name | AgraStrip® Aflatoxin WATEX® Quantitative Test |
Storage temperature | 2°C – 8°C |
Quantitation range | 0-500 ppb |
Limit of detection | 3.3 ppb |
Limit of quantitation | 5.0 ppb |
Materials supplied in the standard product
- 1 tube containing 24 AgraStrip® Aflatoxin Strips
- 1 tube containing 24 AgraStrip® Aflatoxin WATEX® Conjugate wells
- 1 foil bag containing 24 AgraStrip® WATEX® Extraction Buffer Bags
- 1 bottle of 30 ml AgraStrip® Aflatoxin WATEX® Dilution Buffer
- 1 bag of 48 yellow or white pipette tips
- 1 bag of 24 blue pipette tips
- 1 bag of 24 microcentrifuge tubes (dilution tubes)
- 1 roll of 24 pieces of Filter Whirl-Pak® Bags
- 1 SD card for the AgraVisionTM Reader
- 1 tube holder
Materials required but not supplied
- Balance – 400g
- Graduated cylinder: 100 mL
- Distilled or de-ionized or bottled water for extraction
- Timer
- AgraVisionTM reader
- AgraStrip® Incubator incl. Heat Block and Tweezer
- Single channel pipettes capable of pipetting up to 1000 µL or
- Fixed 50 µL pipette
- Fixed 100 µL pipette
- Fixed 1000 µL pipette
AgraStrip® Deoxynivalenol WATEX® Quantitative Tests
The AgraStrip® WATEX® test kits are ready-to-use lateral flow devices (LFD) for on-site testing. These allow a rapid analysis of a wide range of food and feed samples with an assay time of 3 minutes. The eco-friendly One for All WATEX extraction makes the analysis of multiple mycotoxins possible from only a single water-based sample extract. The test kits are available in a quantitative format and are used with the AgraVision™ reader, to provide objective results and secure a consistent results documentation.
Item name | AgraStrip® Deoxynivalenol WATEX® Quantitative Test |
Storage temperature | 2°C – 8°C |
Quantitation range | 0-30 ppm |
Limit of detection | 0.25 ppm |
Limit of quantitation | 0.25 ppm |
Analyte | deoxynivalenol |
Materials supplied in the standard product
- 1 tube containing 24 AgraStrip® Deoxynivalenol Strips
- 1 tube containing 24 AgraStrip® Deoxynivalenol WATEX® Conjugate wells
- 1 foil bag containing 24 AgraStrip® WATEX® Extraction Buffer Bags
- 1 bottle of 30 ml AgraStrip® Deoxynivalenol WATEX® Dilution Buffer
- 1 bag of 48 yellow or white pipette tips
- 1 bag of 24 blue pipette tips
- 1 bag of 24 microcentrifuge tubes (dilution tubes)
- 1 roll of 24 pieces of Filter Whirl-Pak® Bags
- 1 SD card for the AgraVisionTM Reader
- 1 tube holder
Materials required but not supplied
- Balance – 400g
- Graduated cylinder: 100 mL
- Distilled or de-ionized or bottled water for extraction
- Timer
- AgraVisionTM reader
- AgraStrip® Incubator incl. Heat Block and Tweezer
- Single channel pipettes capable of pipetting up to 1000 µL or
- Fixed 50 µL pipette
- Fixed 100 µL pipette
- Fixed 1000 µL pipette
AgraStrip® Fumonisin WATEX® Quantitative Tests
The AgraStrip® WATEX® test kits are ready-to-use lateral flow devices (LFD) for on-site testing. These allow a rapid analysis of a wide range of food and feed samples with an assay time of 3 minutes. The eco-friendly One for All WATEX extraction makes the analysis of multiple mycotoxins possible from only a single water-based sample extract. The test kits are available in a quantitative format and are used with the AgraVisionTM reader, to provide objective results and secure a consistent results documentation.
|
| ||||||||||
|
| ||||||||||
|
| ||||||||||
|
| ||||||||||
|
|
Materials supplied in the standard product
- 1 tube containing 24 AgraStrip® Fumonisin Strips
- 1 tube containing 24 AgraStrip® Fumonisin WATEX® Conjugate wells
- 1 foil bag containing 24 AgraStrip® WATEX® Extraction Buffer Bags
- 1 bottle of 30 ml AgraStrip® Fumonisin WATEX® Dilution Buffer
- 1 bag of 48 yellow or white pipette tips
- 1 bag of 24 blue pipette tips
- 1 bag of 24 microcentrifuge tubes (dilution tubes)
- 1 roll of 24 pieces of Filter Whirl-Pak® Bags
- 1 SD card for the AgraVisionTM Reader
- 1 tube holder
Materials required but not supplied
- Balance – 400g
- Graduated cylinder: 100 mL
- Distilled or de-ionized or bottled water for extraction
- Timer
- AgraVisionTM reader
- AgraStrip® Incubator incl. Heat Block and Tweezer
AgraStrip® Total Aflatoxin Qualitative Tests
The AgraStrip® Aflatoxin Test is a one-step lateral flow immunochromatographic assay that determines the presence of total aflatoxin (B1, B2, G1 and G2) at a specific cutoff level in grains, cereals and other commodities. The AgraStrip® Aflatoxin Test has been validated for a variety of food products, such as corn, peanuts, rice, rice flour, wheat flour, semolina, almonds, among others.
Item name | AgraStrip® Aflatoxin Qualitative Test Kits |
Storage temperature | 2°C – 8°C |
Analyte | Total Aflatoxin |
Materials supplied in the standard product
- 1 tube containing 24 aflatoxin test strips
- 1 tube containing 24 microtiter wells coated with antibody-particle complex
- 1 bottle of 1.7 mL assay diluents
- 1 piece of microwell holder
- 1 bag of 48 pieces of pipette tips
Materials required but not supplied
- Romer Series II® Mill or equivalent
- Blender or a tightly sealing jar with lid
- Balance – 400 g
- Graduated cylinder: 100 mL
- 70 % methanol or ACS grade methanol for making 70 % methanol
- Distilled or de-ionized water for making 70 % methanol or 50% ethanol or Formula 3A ethanol for making 50 % ethanol
- Container with a minimum 50 mL capacity
- Whatman#1 filter paper or equivalent (optional)
- Filter funnel (optional)
- Single channel pipettor capable of pipetting 50 µL with tips
- Timer
AgraStrip® Zearalenone WATEX® Quantitative Tests
The AgraStrip® WATEX® test kits are ready-to-use lateral flow devices (LFD) for on-site testing. These allow a rapid analysis of a wide range of food and feed samples with an assay time of 3 minutes. The eco-friendly One for All WATEX extraction makes the analysis of multiple mycotoxins possible from only a single water-based sample extract. The test kits are available in a quantitative format and are used with the AgraVision™ reader, to provide objective results and secure a consistent results documentation.
Item name | AgraStrip® Zearalenone WATEX® Quantitative Test |
Storage temperature | 2°C – 8°C |
Quantitation range | 0-1000 ppb |
Limit of detection | 30 ppb |
Limit of quantitation | 40 ppb |
Materials supplied in the standard product
- 1 tube containing 24 AgraStrip® Zearalenone Strips
- 1 tube containing 24 AgraStrip® Zearalenone WATEX® Conjugate wells
- 1 foil bag containing 24 AgraStrip® WATEX® Extraction Buffer Bags
- 1 bottle of 30 ml AgraStrip® Zearalenone WATEX® Dilution Buffer
- 1 bag of 48 yellow or white pipette tips
- 1 bag of 24 blue pipette tips
- 1 bag of 24 microcentrifuge tubes (dilution tubes)
- 1 roll of 24 pieces of Filter Whirl-Pak® Bags
- 1 SD card for the AgraVisionTM Reader
- 1 tube holder
Materials required but not supplied
- Balance – 400g
- Graduated cylinder: 100 mL
- Distilled or de-ionized or bottled water for extraction
- Timer
- AgraVisionTM reader
- AgraStrip® Incubator incl. Heat Block and Tweezer
- Single channel pipettes capable of pipetting up to 1000 µL or
- Fixed 50 µL pipette
- Fixed 100 µL pipette
- Fixed 1000 µL pipette
AgraStrip® Ochratoxin A WATEX® Quantitative Tests
The AgraStrip® WATEX® test kits are ready-to-use lateral flow devices (LFD) for on-site testing. These allow a rapid analysis of a wide range of food and feed samples with an assay time of 3 minutes. The eco-friendly One for All WATEX extraction makes the analysis of multiple mycotoxins possible from only a single water-based sample extract. The test kits are available in a quantitative format and are used with the AgraVisionTM reader, to provide objective results and secure a consistent results documentation.
Item name | AgraStrip® Ochratoxin A WATEX® Quantitative Test |
Storage temperature | 2°C – 8°C |
Quantitation range | 0 – 100 ppb |
Limit of detection | 4 ppb |
Limit of quantitation | 4 ppb |
Analyte | ochratoxin |
Number of tests | 24 |
Materials supplied in the standard product
- 1 tube containing 24 AgraStrip® Ochratoxin A strips
- 1 tube containing 24 AgraStrip® Ochratoxin A WATEX® conjugate wells
- 1 foil bag containing 24 AgraStrip® WATEX® extraction buffer bags
- 1 bottle of 30 ml AgraStrip® Ochratoxin A WATEX® dilution buffer
- 1 bag of 48 yellow or white pipette tips
- 1 bag of 24 blue pipette tips
- 1 bag of 24 microcentrifuge tubes (dilution tubes)
- 1 roll of 24 pieces of filter Whirl-Pak® bags
- 1 SD card for the AgraVisionTM reader
- 1 tube holder
Materials required but not supplied
- Balance – 400g
- Graduated cylinder: 100 mL
- Distilled or de-ionized or bottled water for extraction
- Timer
- AgraVisionTM reader
- AgraStrip® incubator incl. heat block and tweezer
- Single channel pipettes capable of pipetting up to 1000 µL or fixed 50 µL pipette and fixed 100 µL pipette and fixed 1000 µL pipette
AgraStrip® Pro Total Aflatoxin WATEX®
The AgraStrip® Pro WATEX® test system enables the rapid and simple on-site quantification of mycotoxins in a variety of agricultural commodities. Both extraction and assay have been streamlined, reducing steps to a bare minimum while setting new standards in accuracy and usability. The test kits are available in a quantitative format and are used with the AgraVisionTM Pro reader, to provide objective results and secure a consistent results documentation.
Item name | AGRASTRIP PRO TOTAL AFLATOXIN WATEX |
Storage temperature | 2°C – 8°C |
Quantitation range | 0 – 460 ppb |
Limit of detection | 1 ppb |
Limit of quantitation | 1.5 ppb |
Analyte | Total Aflatoxin |
Number of tests | 40 |
Materials supplied
- 1 tube containing 40 AgraStrip® Pro Total Aflatoxin strips
- 1 bag containing 40 AgraStrip® Pro cartridges
- 1 foil bag containing 40 AgraStrip® WATEX® extraction buffer bags
- 1 bottle of 50 ml AgraStrip® Pro Total Aflatoxin ® dilution buffer
- 2 bags of 40 yellow or white pipette tips
- 1 bag of 40 blue pipette tips
- 1 bag of 40 microcentrifuge tubes (dilution tubes)
- 4 rolls of each 10 pieces of filter Whirl-Pak® bags
- 1 QR code card for the AgraVisionTM Pro reader
- 1 tube holder
Materials required but not supplied
- balance – 400g
- graduated cylinder: 100 mL
- distilled or de-ionized or bottled water for extraction
- timer
- AgraVisionTM Pro reader
- microcentrifuge
- single channel pipettes capable of pipetting up to 1000 µL or
- fixed 100 µL pipette
- fixed 1000 µL pipette
AgraStrip® Pro Deoxynivalenol WATEX®
The AgraStrip® Pro WATEX® test system enables the rapid and simple on-site quantification of mycotoxins in a variety of agricultural commodities. Both extraction and assay have been streamlined, reducing steps to a bare minimum while setting new standards in accuracy and usability. The test kits are available in a quantitative format and are used with the AgraVisionTM Pro reader, to provide objective results and secure a consistent results documentation.
Item name | AGRASTRIP PRO DEOXYNIVALENOL WATEX |
Storage temperature | 2°C – 8°C |
Quantitation range | 0 – 44 ppm |
Limit of detection | 0.1 ppm |
Limit of quantitation | 0.2 ppm |
Analyte | deoxynivalenol |
Number of tests | 40 |
Materials supplied
- 1 tube containing 40 AgraStrip® Pro Deoxynivalenol strips
- 1 bag containing 40 AgraStrip® Pro cartridges
- 1 foil bag containing 40 AgraStrip® WATEX® extraction buffer bags
- 1 bottle of 50 ml AgraStrip® Pro Deoxynivalenol ® dilution buffer
- 2 bags of 40 yellow or white pipette tips
- 1 bag of 40 blue pipette tips
- 1 bag of 40 microcentrifuge tubes (dilution tubes)
- 4 rolls of each 10 pieces of filter Whirl-Pak® bags
- 1 QR code card for the AgraVisionTM Pro reader
- 1 tube holder
Materials required but not supplied
- balance – 400g
- graduated cylinder: 100 mL
- distilled or de-ionized or bottled water for extraction
- timer
- AgraVisionTM Pro reader
- microcentrifuge
- single channel pipettes capable of pipetting up to 1000 µL or
- fixed 100 µL pipette
- fixed 1000 µL pipette
AgraStrip® Pro Total Fumonisin WATEX®
The AgraStrip® Pro WATEX® test system enables the rapid and simple on-site quantification of mycotoxins in a variety of agricultural commodities. Both extraction and assay have been streamlined, reducing steps to a bare minimum while setting new standards in accuracy and usability. The test kits are available in a quantitative format and are used with the AgraVisionTM Pro reader, to provide objective results and secure a consistent results documentation.
Item name | AGRASTRIP PRO TOTAL FUMONISIN WATEX |
Storage temperature | 2°C – 8°C |
Quantitation range | 0 – 44 ppm |
Limit of detection | 0.1 ppm |
Limit of quantitation | 0.2 ppm |
Analyte | total fumonisin |
Number of tests | 40 |
Materials supplied
- 1 tube containing 40 AgraStrip® Pro Fumonisin strips
- 1 bag containing 40 AgraStrip® Pro cartridges
- 1 foil bag containing 40 AgraStrip® WATEX® extraction buffer bags
- 1 bottle of 50 ml AgraStrip® Pro Total Fumonisin® dilution buffer
- 2 bags of 40 yellow or white pipette tips
- 1 bag of 40 blue pipette tips
- 1 bag of 40 microcentrifuge tubes (dilution tubes)
- 4 rolls of each 10 pieces of filter Whirl-Pak® bags
- 1 QR code card for the AgraVisionTM Pro reader
- 1 tube holder
Materials required but not supplied
- balance – 400g
- graduated cylinder: 100 mL
- distilled or de-ionized or bottled water for extraction
- timer
- AgraVisionTM Pro reader
- microcentrifuge
- single channel pipettes capable of pipetting up to 1000 µL or
- fixed 100 µL pipette
- fixed 1000 µL pipette
AgraStrip® Pro Zearalenone WATEX®
The AgraStrip® Pro WATEX® test system enables the rapid and simple on-site quantification of mycotoxins in a variety of agricultural commodities. Both extraction and assay have been streamlined, reducing steps to a bare minimum while setting new standards in accuracy and usability. The test kits are available in a quantitative format and are used with the AgraVisionTM Pro reader, to provide objective results and secure a consistent results documentation.
Item name | AGRASTRIP PRO ZEARALENONE WATEX |
Storage temperature | 2°C – 8°C |
Quantitation range | 0 – 1650 ppb |
Limit of detection | 25 ppm |
Limit of quantitation | 40 ppm |
Analyte | zearalenone |
Materials supplied
- 1 tube containing 40 AgraStrip® Pro Fumonisin strips
- 1 bag containing 40 AgraStrip® Pro cartridges
- 1 foil bag containing 40 AgraStrip® WATEX® extraction buffer bags
- 1 bottle of 50 ml AgraStrip® Pro Total Fumonisin® dilution buffer
- 2 bags of 40 yellow or white pipette tips
- 1 bag of 40 blue pipette tips
- 1 bag of 40 microcentrifuge tubes (dilution tubes)
- 4 rolls of each 10 pieces of filter Whirl-Pak® bags
- 1 QR code card for the AgraVisionTM Pro reader
- 1 tube holder
Materials required but not supplied
- balance – 400g
- graduated cylinder: 100 mL
- distilled or de-ionized or bottled water for extraction
- timer
- AgraVisionTM Pro reader
- microcentrifuge
- single channel pipettes capable of pipetting up to 1000 µL or
- fixed 100 µL pipette
- fixed 1000 µL pipette
AgraStrip® Pro Ochratoxin A WATEX®
The AgraStrip® Pro WATEX® test system enables the rapid and simple on-site quantification of mycotoxins in a variety of agricultural commodities. Both extraction and assay have been streamlined, reducing steps to a bare minimum while setting new standards in accuracy and usability. The test kits are available in a quantitative format and are used with the AgraVisionTM Pro reader, to provide objective results and secure a consistent results documentation.
Item name | AGRASTRIP PRO OCHRATOXIN A WATEX |
Storage temperature | 2°C – 8°C |
Quantitation range | 0 – 100 ppb |
Limit of detection | 0.5 ppb |
Limit of quantitation | 1 ppb |
Analyte | Ochratoxin A |
Number of tests | 40 |
Materials supplied
- 1 tube containing 40 AgraStrip® Pro Ochratoxin A strips
- 1 bag containing 40 AgraStrip® Pro cartridges
- 1 foil bag containing 40 AgraStrip® WATEX® extraction buffer bags
- 1 bottle of 50 ml AgraStrip® Pro Ochratoxin A ® dilution buffer
- 2 bags of 40 yellow or white pipette tips
- 1 bag of 40 blue pipette tips
- 1 bag of 40 microcentrifuge tubes (dilution tubes)
- 4 rolls of each 10 pieces of filter Whirl-Pak® bags
- 1 QR code card for the AgraVisionTM Pro reader
- 1 tube holder
Materials required but not supplied
- extraction
- timer
- AgraVisionTM Pro reader
- microcentrifuge
- single channel pipettes capable of pipetting up to 1000 µL or
- fixed 100 µL pipette
- fixed 1000 µL pipette
AgraStrip® Pro T-2/HT-2 WATEX®
The AgraStrip® Pro WATEX® test system enables the rapid and simple on-site quantification of mycotoxins in a variety of agricultural commodities. Both extraction and assay have been streamlined, reducing steps to a bare minimum while setting new standards in accuracy and usability. The test kits are available in a quantitative format and are used with the AgraVisionTM Pro reader, to provide objective results and secure a consistent results documentation.
Item name | AGRASTRIP PRO T-2/HT-2 WATEX |
Storage temperature | 2°C – 8°C |
Quantitation range | 0 – 1000 ppb |
Limit of detection | 15 ppb |
Limit of quantitation | 20 ppb |
Analyte | T-2/HT-2 |
Number of tests | 40 |
Materials supplied
- 1 tube containing 40 AgraStrip® Pro Ochratoxin A strips
- 1 bag containing 40 AgraStrip® Pro cartridges
- 1 foil bag containing 40 AgraStrip® WATEX® extraction buffer bags
- 1 bottle of 50 ml AgraStrip® Pro Ochratoxin A ® dilution buffer
- 2 bags of 40 yellow or white pipette tips
- 1 bag of 40 blue pipette tips
- 1 bag of 40 microcentrifuge tubes (dilution tubes)
- 4 rolls of each 10 pieces of filter Whirl-Pak® bags
- 1 QR code card for the AgraVisionTM Pro reader
- 1 tube holder
Materials required but not supplied
- extraction
- timer
- AgraVisionTM Pro reader
- microcentrifuge
- single channel pipettes capable of pipetting up to 1000 µL or
- fixed 100 µL pipette
- fixed 1000 µL pipette
AgraVision Pro Reader
AgraVisionTM Pro is a lateral flow device reader design specifically for the AgraStrip® Pro test system. The system features a shared extraction and dilution procedure and an intuitive walk-away operation to allow simple testing for several different mycotoxins in less than 10 minutes while helping to eliminate common handling errors. It can independently and simultaneously test up to 4 samples. This together with the 7” display, the easy user interface, the integrated incubator, simple connectivity and blockchain support, makes AgraStrip® Pro and AgraVisionTM Pro the unbeatable solution for your on-site mycotoxin testing needs.
Item name | AGRAVISION PRO READER |
Storage temperature | 15°C – 25°C |
Approvals | CE |
Analyte | mycotoxins |
Voltage | 100 to 240V AC ±10%, 50/60 Hz ±5% |
Ports | USB type A, USB type B |
AgraVision™ Pro Printer
The AgraVision™ Pro Printer can be connected to the AgraVision™ Pro reader to print out the test results.
Item name | AV Pro Printer |
Details | Printer |
AgraVision™ Pro Scanner
AgraVision™ Pro Scanner Scanner can be connected to the AgraVision™ Pro reader to simply scan in the sample ID. The AgraVision™ Pro Scanner can scan QR-codes and barcodes.
Item name | Inateck Barcode Scanner |
Details | Printer |
