Colorimeters/Photometers
MD 100 Photometer
The MD 100 photometer is a convenient choice for testing up to 14 parameters on a single instrument, depending on the combination. The instrument has a simple user interface and is constructed for field use. Several industry specific versions are available the combine all of the tests you need.
The MD 100 has several key features that make it a favorite among users.
- Waterproof Design
The IP 68 design of this instrument ensures that the MD 100 remains water tight for up to 1 hour at 0.1 meter.
Don’t worry about dropping the instrument into a body of water – it floats! - Accurate, Reproducible Results
The optical system of the MD 100 utilizes LEDs and interference filters
which quickly gives you results that you can be confident in. You always measure in the spectral peak. - User Calibration Mode
A one-point calibration is possible.
Additionally, all MD 100 instruments have the ability to display readings directly in ABS or %T units. - One-time-Zero Function
Don’t waste time waiting for your instrument to Zero after each test.
When testing a new sample, zero the instrument once and all subsequent tests of that sample do not require you to re-zero the instrument. - Automatic Data Storage with Transfer Capabilities
The MD 100 automatically stores the last 16 readings with time and date stamp.
These results can be transferred to a spreadsheet using the IRiM accessory. - Ergonomic Design
Whether you’re using the MD 100 out in the field or in the lab, the design of the instrument makes it easy to handle and view the display.
If you’re using the instrument in the lab, the rubber feet on the bottom of the housing eliminates the need for two hand operation or to chase your instrument around the workbench. - Factory Programmed
All MD 100 instruments are supplied ready to use with up to 14 calibration curves.
All you need to do is select the test you need, prepare your sample and test! - Scroll Driven Menu System
The simple interface allows you to quickly reach the test you need.
When the instrument is turned on, it will automatically display the last test used.
MD 110 Photometer
ll MD 110 photometers have a Bluetooth® function. To make the most of it, Tintometer offers an app for mobile devices as well as a PC software with dongle. The measurement results are transmitted to external devices via the Bluetooth® interface for quick evaluation and processing so that all data can be evaluated and assigned directly on site.
App AquaLX®
The free app AquaLX® is ideally designed for use in on-site measurements. Compatible with IOS®– and Android®-based smartphones and tablets, it enables uncomplicated data transmission. It maps all measured values as an illustrative graphic with minimum and maximum limits and supports the export of the data as an Excel®-compatible CSV file.
PC Software
The PC software makes it possible to import data directly from the photometer to the Windows-based PC. As a stationary solution, it facilitates the transfer of data through a quickly established, permanently wireless connection. Further processing of the results can be done both in the software itself and by exporting the data to Excel or as a CSV file.
The set of software and Bluetooth® dongle is available as a separate accessory under item no. 2444480 available.
The MD 110 has several key features that make it a favorite among users.
- Waterproof Design
The IP 68 design of this instrument ensures that the MD 110 remains water tight for up to 1 hour at 0.1 meter. Don’t worry about dropping the instrument into a body of water – it floats! - Accurate, Reproducible Results
The optical system of the MD 110 utilizes LEDs and interference filters which quickly gives you results that you can be confident in. - User Calibration Mode
A one-point calibration is possible. Additionally, all MD 110 instruments have the ability to display readings directly in ABS or %T units. - One-time-Zero Function
Don’t waste time waiting for your instrument to Zero after each test. When testing a new sample, zero the instrument once and all subsequent tests of that sample do not require you to re-zero the instrument. - Automatic Data Storage with Transfer Capabilities
The MD 110 automatically stores the last 16 readings with time and date stamp. These results can be transferred to a spreadsheet using the IRiM accessory. - Ergonomic Design
Whether you’re using the MD 110 out in the field or in the lab, the design of the instrument makes it easy to handle and view the display. If you’re using the instrument in the lab, the rubber feet on the bottom of the housing eliminates the need for two hand operation or to chase your instrument around the workbench. - Factory Programmed
All MD 110 instruments are supplied ready to use with up to 14 calibration curves. All you need to do is select the test you need, prepare your sample and test! - Scroll Driven Menu System
The simple interface allows you to quickly reach the test you need. When the instrument is turned on, it will automatically display the last test used. - 2-Year Warranty
The MD 100 photometer is a convenient choice for testing up to 14 parameters on a single instrument, depending on the combination. The instrument has a simple user interface and is constructed for field use. Several industry specific versions are available the combine all of the tests you need.
The MD 100 has several key features that make it a favorite among users.
- Waterproof Design
The IP 68 design of this instrument ensures that the MD 100 remains water tight for up to 1 hour at 0.1 meter.
Don’t worry about dropping the instrument into a body of water – it floats! - Accurate, Reproducible Results
The optical system of the MD 100 utilizes LEDs and interference filters
which quickly gives you results that you can be confident in. You always measure in the spectral peak. - User Calibration Mode
A one-point calibration is possible.
Additionally, all MD 100 instruments have the ability to display readings directly in ABS or %T units. - One-time-Zero Function
Don’t waste time waiting for your instrument to Zero after each test.
When testing a new sample, zero the instrument once and all subsequent tests of that sample do not require you to re-zero the instrument. - Automatic Data Storage with Transfer Capabilities
The MD 100 automatically stores the last 16 readings with time and date stamp.
These results can be transferred to a spreadsheet using the IRiM accessory. - Ergonomic Design
Whether you’re using the MD 100 out in the field or in the lab, the design of the instrument makes it easy to handle and view the display.
If you’re using the instrument in the lab, the rubber feet on the bottom of the housing eliminates the need for two hand operation or to chase your instrument around the workbench. - Factory Programmed
All MD 100 instruments are supplied ready to use with up to 14 calibration curves.
All you need to do is select the test you need, prepare your sample and test! - Scroll Driven Menu System
The simple interface allows you to quickly reach the test you need.
When the instrument is turned on, it will automatically display the last test used.
MD 200 Photometer
Versatile, compact and: The benchtop photometer MD 200 combines high-quality interference filters with long-term stable LEDs as light sources in a high-precision optic. The result: precise measurement results at all times – no matter where you use it.
- Versatile use
The MD 200 photometer can be used in almost all areas of water analysis. - Precise and low maintenance
The high-precision optics, which in addition to long-term stable LEDs as light sources, also offer high-quality interference filters, ensure precise and reproducible measurement results. In addition, these components make the photometer low-maintenance. - User friendly
The devices impress with their ease of use, ergonomic design and compact dimensions, which makes handling the devices easy and safe. - Reagents
Use long-term stable Lovibond® reagent tablets (5-10 years guaranteed minimum durability) or Lovibond® liquid reagents.
MD 600 Photometer Series
You want to analyse and test wastewater, drinking water, industrial process water or water samples for science or research everywhere and at any time under laboratory conditions? Then the Lovibond® photometers of the MD 600 series are the perfect choice. MD 600, MD 610, MD 640: All measurement instruments have the analytical properties of a laboratory photometer for all important parameters in water analysis. Reliable and fast testing is guaranteed, thanks to long-term stable LEDs, interference filters, Bluetooth interface, mobile data management via app, more than 120 pre-programmed test methods and many more highlights.
Highlights
- Multi-Parameter Testing device combines all of the key water testing parameters and testing ranges
- Portable instrument for use in the lab, plant or out in the field
- User interface is intuitive and easy to navigate
- Easy Access to new testing parameter and ranges
Never have an outdated instrument again! As additional test methods become available, the new software update is available as a free download on our website. - On-screen access to important test information
Using the correct reagent and sample cell for a preprogrammed calibration curve is essential to achieving accurate results. With the push of a button, it’s easy to confirm what is required for the test. The method information will also show which conversion factors can be automatically applied to a method, so results are displayed in the required reporting units. - No Need to memorize method numbers to access a testing method
The scroll-driven menu system allows you to navigate to the test you need without the need to memorize the test method number. In addition, a Users Favorite Menu can be defined so that the instrument displays only the testing methods you want to see, - Data Storage and Transfer Capabilities
Store up to 1,000 readings with location ID, time and date stamp. Test data stored on the instrument can be easily exported using the IRiM accessory, which uses an infrared connection to export data directly to an Excel or .txt file. - Choice of Reagent Platforms
With over 120 pre-programmed testing methods on one instrument, many parameters offer the choice of using Tablet, Powder Pack or Liquid reagents. - Create User-Defined Calibration Curves
Have a proprietary testing method or a requirement to conform to a specific governmental or organizational standard method? Tired of converting ABS or %T values into meaningful values? It’s easy to create and store as many as 35 user-defined methods on the MD 600 series. Up to a 25 order polynomial along with test parameters such as wavelength, measuring range, unit type and number of decimals displayed can be defined and implemented. - Accurate, Reproducible Results
The optical system of the MD 600 series operates with six unique wavelengths. By utilizing LEDs and interference filters, the instrument quickly gives you results that you can be confident in. - One-time-Zero Function
Don’t waste time waiting for your instrument to Zero after each test. When testing a new sample, zero the instrument once and all subsequent tests of that sample do not require you to re-zero the instrument.
MultiDirect, with battery
The MultiDirect – a contemporay, microprocessor-controlled photometer with ergonomically designed keypad and largeformat graphic display
Highlights
- Dual Beam Technoloy and Interference Filters for highest accuracy
- A wide range of pre-programmed methods
- Long-term stable LEDsas light sources
- Update of new methods and languages via Internet (free of charge)
Applications
PM 600 Photometer Series
The requirements of demanding pool operators are met at all times with the photometers PM 600 and PM 620. The devices are equipped with up to 34 test methods and a memory for up to 1000 data sets. The PM 630 offers a Bluetooth® interface instead of infrared data transmission. Intuitive operation and a backlit display make this series particularly user-friendly.
Applications
- Big Memory
The devices of the PM 600 series store up to 1000 data sets. - Modern technology
Infrared (PM 600 / PM 620) or Bluetooth® (PM 630) are available for data transmission.
The PM 600 and PM 620 devices can be connected to the PC via a module, and the PM 630 can be connected to the AquaLX® app via Bluetooth®. - All important parameters
From A(lkalinity-m) to H(hydrogen peroxide), the most important pool parameters are measured.
Optionally, 10 (PM 600) or 34 parameters (PM 620 / PM 630) are available. - Illuminated display
Even in the dark, you can always measure: All devices have a backlit display, giving you more flexibility. - Flexibility
Choose from different dosage forms – tablet reagent, liquid indicator or powder reagent:
with the PM 600 series you can use all types of reagents.
Scuba II
Highlights
- Modern, ergonomic design
- User friendly handling
- Watertight housing*
- Large display
Floatable, waterproof and certainly a useful little helper for the pool: The Scuba II is for private pool owners the ideal companion for the bathing season. Measure the most important parameters and hold the results in your hands immediately.
- Main pool parameters
Whoever as a private pool owner value accurate measurement results of the important pool parameters, such as Chlorine or pH sets, gets with the Scuba II an ideal test device to the hand. The device works intuitively and measures the most important pool parameters of free chlorine, total chlorine, bromine, pH, alkalinity-m and cyanuric acid. - Waterproof
And if the device falls into the water? No problem – the Scuba II is not only waterproof but also buoyant. - Integrated measuring chamber
Take a sample by immersing the measuring chamber in the instrument. - Fast results
Add a reagent and press “Test” button. The result is available within a few seconds. Or in other words: measuring like the pros.
COD Set-Ups
The Lovibond® COD Setups allow highly sensitive and precise water testing with minimum effort. They measure the ST-COD concentration by photometric detection employing a linear relationship between absorbance and concentration.
After adding the sample to a Lovibond® COD tube test (LR, MR according to ISO 15705:2002), it is heated in the reactor for two hours at 150 °C and then analysed in the photometer.
The COD Setups comprise the photometer, 25 tube tests for each of the two lower measuring ranges, a reactor for sample digestion and a vial stand.
Highlights
- ST-COD sealed tubes ready for use
- Suppression of chloride interference up to 1000 mg/L (LR & MR) up to 10000 mg/L (HR)
- Mercury free tube tests,in absence of chloride interference
- 4 ranges:
- Low range: 3 – 150 mg/L, meets ISO 15705:2002
- Middle-low range: 15 – 300 mg/L, meets ISO 15705:2002
- Middle range: 20 – 1500 mg/L, meets ISO 15705:2002
- High range: 200 – 15000 mg/L
After adding the sample to a Lovibond® COD tube test (LR, MR according to ISO 15705:2002), it is heated in the reactor for two hours at 150 °C and then analysed in the photometer.
The COD Setups comprise the photometer, 25 tube tests for each of the two lower measuring ranges, a reactor for sample digestion and a vial stand.
Waste Water Set-Ups
Do you need to have continuous reliable data on the quality of your wastewater? You need to know allways whether your wastewater treatment plant is functioning properly? Here you can assemble waste water measuring stations for routine checks according to your individual requirements – the complete CSB-Laboratory from one source. Select the photometer with the desired measuring technology: MD 600 (infrared), MD 610 (Bluetooth®) or SpectroDirect (spectrophotometer). With the RD125 thermoreactor, suitable reagents and accessories, the determination of chemical oxygen demand (COD) and other important parameters for wastewater control is a safe and cost-effective affair.
Highlights
- Mobile photometer MD 600
- Memory capacity for 1,000 measurement results
- Data transmission via infrared & IRiM
- Thermoreactor RD 125 with 24 tube holes
