-
pH/ORP
-
ISE
-
EC/TDS/Salinity
-
Dissolved Oxygen
-
Multiparameter
Backpacks Labs
Single Parameters
ABS Plastic
Stainless Steel
Monitors
Dataloggers
Controllers and Transmitters
Dosing Pumps
Mini Controllers
PCA Chlorine
Probes
Swimming Pool and Spa Controllers
pH
ORP
ISE
TDS
Dissolved Oxygen
Temperature
Multiparameter
Bluetooth
Photometric Probes
Checker HC
Chemical Test Kits
Photometers
Titration
Calibration Solutions
Fill Solutions
Storage Solutions
Cleaning Solutions
Sample Prep Solutions
ISE Solutions
Titration Solutions
CAL Check Standards
- Checker HC Colorimeters
- COD Meters
- Dissolved Oxygen
- ISE Meters
- Lab Supply
- Multiparameter Meters
- pH Meters
- Photometers
- Resistivity
- Testers
- Thermometers
- Titrators
- Turbidity Meters
Pool Line Digital Thermometer - HI985394
The Checktemp Digital Thermometer is a high-accuracy NTC thermistor thermometer connected to a weighted, stainless steel probe by a 3 m (9.9’) flexible, silicone cable.
The weighted, stainless steel probe is designed to measure temperature in swimming pools and hot tubs. Attached to the meter by 3 m of cable, the probe is capable of taking temperature readings at various depths. The probe is made of AISI 316 stainless steel, which makes it easy to clean.
The HI985394 Pool Line Digital Thermometer is equipped with Hanna’s exclusive CAL Check® feature for reliable and accurate measurements. CAL Check automatically runs a self-check upon startup and looks for any drift in the internal electronics. The thermometer then reports the instruments status back to the user in a matter of seconds; 0 for ok and Err if something is wrong.
Features at-a-glance:
- AISI 316 stainless steel weighted probe
- ±0.3℃ (±0.5℉) Accuracy
- CAL Check™ – Automatically verifies calibration at startup
- ℃/℉ readout – User selectable
- IP 65 water resistant protection
- User-selectable auto-off (select from 8 min., 60 min., or disable)
HI985394 Pool Line Digital Thermometer is supplied with an attached weighted stainless-steel probe to a 3 m (9.9’) silicone cable, 1.5 V AAA batteries (3 pcs.), instrument quality certificate, and instructions.
| SKU | HI985394 |
| Name | Pool Line Digital Thermometer – HI985394 |
| Temperature Range | -20.0 to 80.0?C (-4.0 to 176.0?F) |
| Temperature Resolution | 0.1?C (0.1?F) |
| Temperature Accuracy | ?0.3?C (?0.5?F) |
| Temperature Probe | Weighted stainless steel probe with silicone cable (3 m / 9.9’) |
| Automatic Shut-Off | 8 minutes (default), 60 minutes, or disabled |
| Battery Type/Life | 1.5V AAA alkaline (3) / approximately 2 years of use |
| Environment | -30 to 50?C (-22 to 122 ?F); IP65 |
| Dimensions | 107 x 59 x 17 mm (4.2 x 2.3 x 0.7”) |
| Weight | 109 g (3.8 oz.) |
Checktemp Dip Digital Thermometer - HI98539
The Checktemp Dip Digital Thermometer is a high-accuracy NTC thermistor thermometer connected to a weighted, stainless steel probe by a 3 m (9.9′) flexible, silicone cable.
The weighted, stainless steel probe is designed to measure temperature in tanks, vats, streams, and lakes. Attached to the meter by 3 m of cable, the probe is capable of taking temperature readings at various depths. The probe is made of AISI 316 stainless steel which makes it easy to clean and ideal for temperature measurement in a variety of food and beverage applications such as in wine casks or milk storage tanks. The HI98539 Checktemp Dip is equipped with Hanna’s exclusive CAL Check® feature for reliable and accurate measurements. CAL Check automatically runs a self-check upon startup and looks for any drift in the internal electronics. The Checktemp Dip then reports the instruments status back to the user in a matter of seconds; 0 for ok and Err if something is wrong.
Features at-a-glance:
- ±0.3℃ (±0.5℉) Accuracy
- CAL Check™ – Automatically verifies calibration at startup
- 3 m (9.9′) silicone cable
- ℃/℉ readout – User selectable
- Clear LCD display that is easy to read
- IP 65 water resistant protection
- HACCP Compatible – Use as a tool for control in HACCP analysis
- AISI 316 stainless steel weighted probe
- User-selectable auto-off (select from 8 min., 60 min., or disable)
HI98539 (Checktemp Dip) is supplied with weighted stainless steel probe, 3 m (9.9’) silicone cable, batteries, and instructions.
| SKU | HI98539 |
| Name | Checktemp Dip Digital Thermometer – HI98539 |
| Thermistor Temperature Range | -20.0 to 80.0?C/ -4.0 to 176.0?F |
| Thermistor Temperature Resolution | 0.1?C/ 0.1?F |
| Thermistor Temperature Accuracy | ?0.3?C/ ?0.5 ?F |
| Automatic Shut-Off | 8 min (default), 60 min or OFF |
| Battery Type/Life | 3 x 1.5V AAA Batteries/Approximately 2 years of use |
| Environment | -30 to 50?C (-22 to 122?F); RH max 95%; IP65 |
| Dimensions | 107 x 59 x 17 mm (4.2 x 2.3 x 0.7”) |
| Weight | 109 g (3.8 oz.) |
Checktemp® 1 Digital Thermometer - HI98509
The Checktemp® 1 Digital Thermometer – HI98509 is a high-accuracy thermometer with a 1 m (3.3′) flexible, silicone cable connecting the meter and the stainless steel probe. The sharp-tip penetration probe easily lances semi-solid products such as fruits, vegetables, and cheeses. This probe can also handle liquid, air and measurements in frozen materials. The probe incorporates an NTC thermistor sensor to measure the temperature.
Thermistors make it possible to obtain extremely high accuracy in a very short period of time. The Hanna CAL Check™ feature has been incorporated into the Checktemp®1 for reliable and accurate measurements. CAL Check™ automatically runs a self-check upon startup and reports status back to the user; “-0-” for ok and “Err” if something is wrong.
Checktemp®1 makes routine controls fast and simple for both incoming and outgoing goods. Constructed of AISI 316 stainless steel material, this probe is in compliance with food regulations, making it an ideal instrument for measuring temperature according to HACCP requirements.
Features at-a-glance:
- ±0.2℃ (±0.5℉) – Accuracy
- Most accurate temperature tester in the world
- CAL Check™ – Automatically verifies calibration at startup
- Silicone probe cable – 3.3′ silicone cable maintains flexibility and performance
- ℃/℉ Status – User selectable
- Large display with wide environmental temperature range and viewing angle.
- IP 65 water resistant protection
- HACCP Compatible – Use as a tool for control in HACCP analysis
- AISI 316 stainless steel penetration Probe
- Auto-Off (select from 8 min., 60 min., or turn the feature off)
| SKU | HI98509 |
| Name | Checktemp® 1 Digital Thermometer – HI98509 |
| Temperature Range | -50.0 to 150.0 ?C / -58.0 to 302 ?F |
| Temperature Resolution | 0.1 ?C (-50.0 to 150.0 ?C) 0.1 ?F (-58.0 to 199.9 ?F) / 1 ?F (above 200 ?F) |
| Temperature Accuracy | ?0.2 ?C (-30.0 to 120.0 ?C) ?0.3 ?C (outside: -50.0 to -30.0 ?C and 120.0 to 150.0 ?C) ?0.5 ?F (-22.0 to 199.9 ?F) ?1 ?F (outside: -58.0 to -22.0 ?F and 200 to 302 ?F) |
| Temperature Probe | stainless steel, 1 m (3.3 in.) cable |
| Automatic Shut-Off | 8 min (default), 60 min or OFF |
| Battery Type/Life | 3 x 1.5 V AAA alkaline; approx. 2 years |
| Environment | -30 to 50 ?C (-22 to 122 ?F) |
| Dimensions | 107 x 59 x 17 mm (4.2 x 5.3 x 0.7 in.) |
| Weight | 130 g (4.6 oz. |
| Notes | Certication: EN 13485:2001 – Suitability: Storage; Environment: E; Accuracy Class: 0.5; Protection: IP65 |
Checktemp® Digital Thermometer - HI98501
The HI 98501 Checktemp® is a digital thermometer with stainless steel penetration probe. It delivers high accuracy temperature measurements over a wide temperature range without worrying about breakage or condensation.
The Checktemp® offers NO breakage, NO waste, NO injuries and NO difficulty in reading; the digital display prevents a parallax error (observing the wrong measurement due to the angle of view) and is optimized for a wide range of environmental temperatures. Checktemp® is provided with Hanna’s unique CAL Check™ function for accurate measurements every time. The Checktemp® implements a CAL Check™ upon startup and reports the status as 0 or Err.
The sharp-tip probe of the Checktemp® easily penetrates semi-solid products making routine temperature checks simple and quick for both incoming and outgoing goods. Checktemp® is the ideal instrument for measuring temperature according to HACCP requirements.
Features at-a-glance:
- ±0.2℃ (±0.5℉) – Accuracy
- Most accurate temperature tester in the world
- CAL Check™ – Automatically verifies calibration at startup
- ℃/℉ Status – User selectable
- Large display with wide environmental temperature range and viewing angle.
- IP 65 water resistant protection
- HACCP Compatible – Use as a tool for control in HACCP analysis
- AISI 316 stainless steel penetration Probe
- 3000 hours of battery life (Continuous use)
- Auto-Off (select from 8 min., 60 min., or turn the feature off)
| SKU | HI98501 |
| Name | Checktemp® Digital Thermometer – HI98501 |
| Temperature Range | -50.0 to 150.0 ?C / -58.0 to 302 ?F |
| Temperature Resolution | 0.1 ?C (-50.0 to 150.0 ?C) 0.1 ?F (-58.0 to 199.9 ?F) / 1 ?F (above 200 ?F) |
| Temperature Accuracy | ?0.2 ?C (-30.0 to 120.0 ?C) ?0.3 ?C (outside: -50.0 to -30.0 ?C and 120.0 to 150.0 ?C) ?0.5 ?F (-22.0 to 199.9 ?F) ?1 ?F (outside: -58.0 to -22.0 ?F and 200 to 302 ?F) |
| Automatic Shut-Off | 8 min (default), 60 min or OFF |
| Battery Type/Life | 1 x CR2032; approx. 2000 hours of continuous use |
| Environment | -30 to 50 ?C (-22 to 122 ?F) |
| Dimensions | 50 x 185 x 21 mm (2 x 7.3 x 0.9“) |
| Weight | 50 g (1.8 oz.) |
| Notes | Certication: EN 13485:2001 – Suitability: Storage; Environment: E; Accuracy Class: 0.5; IP65 |
Waterproof portable thermistor thermometer for brewing - HI935012
The HI935012 is a waterproof portable thermistor thermometer made for the brewing professional that needs to measure the temperature in the center of a tank or vessel. The HI935012 is supplied with the FC762N2 thermistor probe that is made of stainless steel and is 1-meter long. For a fast and accurate measurement, the pre-calibrated semi-conductor sensor is located in the tip of the probe.
The HI935012, as a meter, can measure over a wide range of temperatures from -50.0 ℃ (-58.0 ℉) up to 150 ℃ (302 ℉) and offers a very high accuracy of ±0.1 ℃ (±0.2 ℉). The accuracy of the meter is assured with advanced diagnostic features including CAL-Check that checks for an abnormal drift of the internal electronics. Using a properly prepared ice bath, the meter and probe can be calibrated by the user. Additional features to have confidence in the measurements include a battery error prevention system (BEPS) that will not allow a reading to be taken when there is not sufficient battery power and probe diagnostics that alert the user when the probe is not connected
There are many considerations when designing a thermometer for the food professional. Below are features that we considered to be important and beneficial.
CAL Check
The calibration check (CAL Check) feature of the HI935012 is an internal diagnostic feature that checks for any drift in the electronics that occurs with all digital thermometers over time. When the meter is turned CAL Check looks to see if the internal calibration is within ±0.3 ℃. If the drift is greater and error (err) message will be displayed. With CAL Check you can be confident that the meter is working properly
Long Battery Life
The thermometer has an exceptional battery life of approximately 4500 hours using three common AAA batteries. The battery percent level is displayed when powered on alerting the user to the remaining battery life
Probe Error Messages
The “NO PROBE” message is displayed on the meter when a probe is not attached or there is a break in the cable
1M Stainless Steel Probe
The supplied FC762N2 thermistor probe that is 1 M (39″) long and 10 mm (0.39″) in diameter. This extra-long probe allows for the measurement of temperature in the middle of tank to make sure it is consistent throughout.
Supplied with Carrying Case
The HI935102 is supplied with a soft carrying case that holds both the probe and the meter. There is a pouch inside for easy access to the meter.
Supplied with Instrument Quality Certificate
HI935012 with the FC762N2 are calibrated according to an ISO9001 calibration system using standards and reference instruments in which the accuracy is traceable the National Institute of Standards (NIST) in the USA, or to internationally acceptable physical standards
Additional Features/Benefits:
Large LCD
- An enhanced LCD displays the measurement reading in ℃ or ℉, stability indicator, error messages, and low battery indicator.
Stability Indicator
- An hourglass indicator is displayed on the LCD until a stable reading is obtained. Once a reading stabilizes, the indicator disappears and a reading can be taken.
Automatic Shut-off
- The meter can be set to automatically turn off after 8 minutes or 60 minutes to conserve battery life in the event that the meter is left on. The auto-off feature can also be disabled.
Ergonomic, rugged, waterproof (IP65) design
- For additional protection the HI710027 shockproof rubber boot is available as an accessory.
HI935012 is supplied with FC762N2 1M thermistor stainless steel probe, batteries, instruction manual, instrument quality certificate, and protective carrying case.
| SKU | HI935012 |
| Name | Waterproof portable thermistor thermometer for brewing – HI935012 |
| Thermistor Temperature Range | -20.0 to 120.0 ℃ ; -4.0 to 248.0 °F |
| Thermistor Temperature Resolution | 0.1 ℃; 0.1 °F |
| Thermistor Temperature Accuracy | ? 0.1 ℃; ? 0.2 °F |
| Temperature Probe | Thermistor probe |
| Automatic Shut-Off | user selectable: off, 8 or 60 m in. |
| Battery Type/Life | 1.5V AAA battery (3 pcs.) / approximately 4500 hours of continuous use |
| Environment | rated operating conditions: -20 to 50?C (-4 to 122?F); limiting conditions: -30 to 50?C (-22 to 122?F); storage and transportation conditions: -40 to 70?C (-40 to 158?F); relative humidity: 100% |
| Dimensions | 140 x 57 x 28 mm (5.5 x 2.2 x 1.1”) |
| Weight | 175 g (6.27 oz.) |
Checktemp® 4 Folding Thermometer - HI151
Ergonomic Design with Rubberized Grip
Checktemp® 4 has an ergonomic design that fits comfortably in the hand. The meter uses vulcanized rubber that is available in 6 different colors for a non-slip grip.
Waterproof Durable Casing
The Checktemp thermometer is completely waterproof to IP67 standards. The IP67 standard is for continuous immersion in water up to 1 meter (3′) in depth. The meters will actually float if accidentally dropped into a pot, vat or any other container.
Penetration Probe
The sharp, AISI 316 stainless steel probe is ideal for testing fresh, cooked and semi frozen food. The NTC thermistor is located in the sensing tip and allows for the measurement of food that is 2 cm (0.79″) thick.
Instrument Quality Certificate for Traceability
HI151 is calibrated to five points (-20.0, 0.0, 25.0, 60.0 and 120.0 ℃) and tested at three points using reference meters, the accuracy of which is traceable to NIST in the USA or an internationally acceptable national physical standards. Each meter is serialized and supplied with an instrument quality certificate
CAL-Check
With all thermometers there is drift in the electronics over time. Every time the thermometer is switched ON the LCD will display “CAL” then “-0-”, indicating that the factory calibration has been verified and the thermometer is ready for use.
Wake on Motion Sensor
The meter has an adjustable power save mode that can be disabled. The power save mode can be programmed to turn the display off and conserve power after 1, 2, 8, or 60 minutes. The built-in motion sensor detects when the meter is picked up and automatically turns the display back on.
Checktemp®4 Temperature Tester – HI151
HI151 Checktemp 4 is supplied with batteries, quality certificate, and instruction manual.
| SKU | HI151-web |
| Name | Checktemp® 4 Folding Thermometer – HI151 |
| Thermistor Temperature Range | -50.0 to 300 ?C / -58.0 to 572 ?F |
| Thermistor Temperature Resolution | 0.1 ?C (-50.0 to 199.9 ?C); 1 ?C (200 to 300 ?C) 0.1 ?F (-58.0 to 199.9 ?F); 1 ?F (200 to 572 ?F) |
| Thermistor Temperature Accuracy | ? 0.2 ?C (-30.0 to 170.0 ?C); ? 0.4 ?C (-50.0 to -30.0 ?C and 170.0 to 199.9 ?C); ? 1 ?C (200 to 300 ?C) ? 1 digit ?0.4 ?F (-22.0 to 199.9 ?F); ?0.8 ?F (-58.0 to -22.0 ?F); ?1 ?F (200 to 392 ?F); ?2 ?F (392 to 572 ?F) ? 1 digit |
| Automatic Shut-Off | power save settings: 1 min, 2 min (default), 8 min, 60 m in. or OFF |
| Battery Type/Life | CR2032 3V x 2 pcs. / approx. 4000 hours of use |
| Environment | -20.0 to 50.0 ?C (-4.0 to 122.0 ?F) |
| Dimensions | 165 x 45 x 24 mm (6.5 x 1.8 x 0.9”) |
| Weight | 85 g (3.0 oz) |
Checktemp® 4 Folding Thermometer - HI151-Brown-Yes
Ergonomic Design with Rubberized Grip
Checktemp® 4 has an ergonomic design that fits comfortably in the hand. The meter uses vulcanized rubber that is available in 6 different colors for a non-slip grip.
Waterproof Durable Casing
The Checktemp thermometer is completely waterproof to IP67 standards. The IP67 standard is for continuous immersion in water up to 1 meter (3′) in depth. The meters will actually float if accidentally dropped into a pot, vat or any other container.
Penetration Probe
The sharp, AISI 316 stainless steel probe is ideal for testing fresh, cooked and semi frozen food. The NTC thermistor is located in the sensing tip and allows for the measurement of food that is 2 cm (0.79″) thick.
Instrument Quality Certificate for Traceability
HI151 is calibrated to five points (-20.0, 0.0, 25.0, 60.0 and 120.0 ℃) and tested at three points using reference meters, the accuracy of which is traceable to NIST in the USA or an internationally acceptable national physical standards. Each meter is serialized and supplied with an instrument quality certificate
CAL-Check
With all thermometers there is drift in the electronics over time. Every time the thermometer is switched ON the LCD will display “CAL” then “-0-”, indicating that the factory calibration has been verified and the thermometer is ready for use.
Wake on Motion Sensor
The meter has an adjustable power save mode that can be disabled. The power save mode can be programmed to turn the display off and conserve power after 1, 2, 8, or 60 minutes. The built-in motion sensor detects when the meter is picked up and automatically turns the display back on.
Checktemp®4 Temperature Tester – HI151
HI151 Checktemp 4 is supplied with batteries, quality certificate, and instruction manual.
| SKU | HI151-500 |
| Name | Checktemp® 4 Folding Thermometer – HI151-Brown-Yes |
| Thermistor Temperature Range | -50.0 to 300 ?C / -58.0 to 572 ?F |
| Thermistor Temperature Resolution | 0.1 ?C (-50.0 to 199.9 ?C); 1 ?C (200 to 300 ?C) 0.1 ?F (-58.0 to 199.9 ?F); 1 ?F (200 to 572 ?F) |
| Thermistor Temperature Accuracy | ? 0.2 ?C (-30.0 to 170.0 ?C); ? 0.4 ?C (-50.0 to -30.0 ?C and 170.0 to 199.9 ?C); ? 1 ?C (200 to 300 ?C) ? 1 digit ?0.4 ?F (-22.0 to 199.9 ?F); ?0.8 ?F (-58.0 to -22.0 ?F); ?1 ?F (200 to 392 ?F); ?2 ?F (392 to 572 ?F) ? 1 digit |
| Automatic Shut-Off | power save settings: 1 min, 2 min (default), 8 min, 60 m in. or OFF |
| Battery Type/Life | CR2032 3V x 2 pcs. / approx. 4000 hours of use |
| Environment | -20.0 to 50.0 ?C (-4.0 to 122.0 ?F) |
| Dimensions | 165 x 45 x 24 mm (6.5 x 1.8 x 0.9”) |
| Weight | 85 g (3.0 oz) |
Checktemp® 4 Folding Thermometer - HI151-Brown-No
Ergonomic Design with Rubberized Grip
Checktemp® 4 has an ergonomic design that fits comfortably in the hand. The meter uses vulcanized rubber that is available in 6 different colors for a non-slip grip.
Waterproof Durable Casing
The Checktemp thermometer is completely waterproof to IP67 standards. The IP67 standard is for continuous immersion in water up to 1 meter (3′) in depth. The meters will actually float if accidentally dropped into a pot, vat or any other container.
Penetration Probe
The sharp, AISI 316 stainless steel probe is ideal for testing fresh, cooked and semi frozen food. The NTC thermistor is located in the sensing tip and allows for the measurement of food that is 2 cm (0.79″) thick.
Instrument Quality Certificate for Traceability
HI151 is calibrated to five points (-20.0, 0.0, 25.0, 60.0 and 120.0 ℃) and tested at three points using reference meters, the accuracy of which is traceable to NIST in the USA or an internationally acceptable national physical standards. Each meter is serialized and supplied with an instrument quality certificate
CAL-Check
With all thermometers there is drift in the electronics over time. Every time the thermometer is switched ON the LCD will display “CAL” then “-0-”, indicating that the factory calibration has been verified and the thermometer is ready for use.
Wake on Motion Sensor
The meter has an adjustable power save mode that can be disabled. The power save mode can be programmed to turn the display off and conserve power after 1, 2, 8, or 60 minutes. The built-in motion sensor detects when the meter is picked up and automatically turns the display back on.
Checktemp®4 Temperature Tester – HI151
HI151 Checktemp 4 is supplied with batteries, quality certificate, and instruction manual.
| SKU | HI151-5 |
| Name | Checktemp® 4 Folding Thermometer – HI151-Brown-No |
| Thermistor Temperature Range | -50.0 to 300 ?C / -58.0 to 572 ?F |
| Thermistor Temperature Resolution | 0.1 ?C (-50.0 to 199.9 ?C); 1 ?C (200 to 300 ?C) 0.1 ?F (-58.0 to 199.9 ?F); 1 ?F (200 to 572 ?F) |
| Thermistor Temperature Accuracy | ? 0.2 ?C (-30.0 to 170.0 ?C); ? 0.4 ?C (-50.0 to -30.0 ?C and 170.0 to 199.9 ?C); ? 1 ?C (200 to 300 ?C) ? 1 digit ?0.4 ?F (-22.0 to 199.9 ?F); ?0.8 ?F (-58.0 to -22.0 ?F); ?1 ?F (200 to 392 ?F); ?2 ?F (392 to 572 ?F) ? 1 digit |
| Automatic Shut-Off | power save settings: 1 min, 2 min (default), 8 min, 60 m in. or OFF |
| Battery Type/Life | CR2032 3V x 2 pcs. / approx. 4000 hours of use |
| Environment | -20.0 to 50.0 ?C (-4.0 to 122.0 ?F) |
| Dimensions | 165 x 45 x 24 mm (6.5 x 1.8 x 0.9”) |
| Weight | 85 g (3.0 oz) |
Checktemp® 4 Folding Thermometer - HI151-Green-Yes
Ergonomic Design with Rubberized Grip
Checktemp® 4 has an ergonomic design that fits comfortably in the hand. The meter uses vulcanized rubber that is available in 6 different colors for a non-slip grip.
Waterproof Durable Casing
The Checktemp thermometer is completely waterproof to IP67 standards. The IP67 standard is for continuous immersion in water up to 1 meter (3′) in depth. The meters will actually float if accidentally dropped into a pot, vat or any other container.
Penetration Probe
The sharp, AISI 316 stainless steel probe is ideal for testing fresh, cooked and semi frozen food. The NTC thermistor is located in the sensing tip and allows for the measurement of food that is 2 cm (0.79″) thick.
Instrument Quality Certificate for Traceability
HI151 is calibrated to five points (-20.0, 0.0, 25.0, 60.0 and 120.0 ℃) and tested at three points using reference meters, the accuracy of which is traceable to NIST in the USA or an internationally acceptable national physical standards. Each meter is serialized and supplied with an instrument quality certificate
CAL-Check
With all thermometers there is drift in the electronics over time. Every time the thermometer is switched ON the LCD will display “CAL” then “-0-”, indicating that the factory calibration has been verified and the thermometer is ready for use.
Wake on Motion Sensor
The meter has an adjustable power save mode that can be disabled. The power save mode can be programmed to turn the display off and conserve power after 1, 2, 8, or 60 minutes. The built-in motion sensor detects when the meter is picked up and automatically turns the display back on.
Checktemp®4 Temperature Tester – HI151
HI151 Checktemp 4 is supplied with batteries, quality certificate, and instruction manual.
| SKU | HI151-400 |
| Name | Checktemp® 4 Folding Thermometer – HI151-Green-Yes |
| Thermistor Temperature Range | -50.0 to 300 ?C / -58.0 to 572 ?F |
| Thermistor Temperature Resolution | 0.1 ?C (-50.0 to 199.9 ?C); 1 ?C (200 to 300 ?C) 0.1 ?F (-58.0 to 199.9 ?F); 1 ?F (200 to 572 ?F) |
| Thermistor Temperature Accuracy | ? 0.2 ?C (-30.0 to 170.0 ?C); ? 0.4 ?C (-50.0 to -30.0 ?C and 170.0 to 199.9 ?C); ? 1 ?C (200 to 300 ?C) ? 1 digit ?0.4 ?F (-22.0 to 199.9 ?F); ?0.8 ?F (-58.0 to -22.0 ?F); ?1 ?F (200 to 392 ?F); ?2 ?F (392 to 572 ?F) ? 1 digit |
| Automatic Shut-Off | power save settings: 1 min, 2 min (default), 8 min, 60 m in. or OFF |
| Battery Type/Life | CR2032 3V x 2 pcs. / approx. 4000 hours of use |
| Environment | -20.0 to 50.0 ?C (-4.0 to 122.0 ?F) |
| Dimensions | 165 x 45 x 24 mm (6.5 x 1.8 x 0.9”) |
| Weight | 85 g (3.0 oz) |
Checktemp® 4 Folding Thermometer - HI151-Green-No
Ergonomic Design with Rubberized Grip
Checktemp® 4 has an ergonomic design that fits comfortably in the hand. The meter uses vulcanized rubber that is available in 6 different colors for a non-slip grip.
Waterproof Durable Casing
The Checktemp thermometer is completely waterproof to IP67 standards. The IP67 standard is for continuous immersion in water up to 1 meter (3′) in depth. The meters will actually float if accidentally dropped into a pot, vat or any other container.
Penetration Probe
The sharp, AISI 316 stainless steel probe is ideal for testing fresh, cooked and semi frozen food. The NTC thermistor is located in the sensing tip and allows for the measurement of food that is 2 cm (0.79″) thick.
Instrument Quality Certificate for Traceability
HI151 is calibrated to five points (-20.0, 0.0, 25.0, 60.0 and 120.0 ℃) and tested at three points using reference meters, the accuracy of which is traceable to NIST in the USA or an internationally acceptable national physical standards. Each meter is serialized and supplied with an instrument quality certificate
CAL-Check
With all thermometers there is drift in the electronics over time. Every time the thermometer is switched ON the LCD will display “CAL” then “-0-”, indicating that the factory calibration has been verified and the thermometer is ready for use.
Wake on Motion Sensor
The meter has an adjustable power save mode that can be disabled. The power save mode can be programmed to turn the display off and conserve power after 1, 2, 8, or 60 minutes. The built-in motion sensor detects when the meter is picked up and automatically turns the display back on.
Checktemp®4 Temperature Tester – HI151
HI151 Checktemp 4 is supplied with batteries, quality certificate, and instruction manual.
| SKU | HI151-4 |
| Name | Checktemp® 4 Folding Thermometer – HI151-Green-No |
| Thermistor Temperature Range | -50.0 to 300 ?C / -58.0 to 572 ?F |
| Thermistor Temperature Resolution | 0.1 ?C (-50.0 to 199.9 ?C); 1 ?C (200 to 300 ?C) 0.1 ?F (-58.0 to 199.9 ?F); 1 ?F (200 to 572 ?F) |
| Thermistor Temperature Accuracy | ? 0.2 ?C (-30.0 to 170.0 ?C); ? 0.4 ?C (-50.0 to -30.0 ?C and 170.0 to 199.9 ?C); ? 1 ?C (200 to 300 ?C) ? 1 digit ?0.4 ?F (-22.0 to 199.9 ?F); ?0.8 ?F (-58.0 to -22.0 ?F); ?1 ?F (200 to 392 ?F); ?2 ?F (392 to 572 ?F) ? 1 digit |
| Automatic Shut-Off | power save settings: 1 min, 2 min (default), 8 min, 60 m in. or OFF |
| Battery Type/Life | CR2032 3V x 2 pcs. / approx. 4000 hours of use |
| Environment | -20.0 to 50.0 ?C (-4.0 to 122.0 ?F) |
| Dimensions | 165 x 45 x 24 mm (6.5 x 1.8 x 0.9”) |
| Weight | 85 g (3.0 oz) |
Checktemp® 4 Folding Thermometer - HI151-Yellow-Yes
Ergonomic Design with Rubberized Grip
Checktemp® 4 has an ergonomic design that fits comfortably in the hand. The meter uses vulcanized rubber that is available in 6 different colors for a non-slip grip.
Waterproof Durable Casing
The Checktemp thermometer is completely waterproof to IP67 standards. The IP67 standard is for continuous immersion in water up to 1 meter (3′) in depth. The meters will actually float if accidentally dropped into a pot, vat or any other container.
Penetration Probe
The sharp, AISI 316 stainless steel probe is ideal for testing fresh, cooked and semi frozen food. The NTC thermistor is located in the sensing tip and allows for the measurement of food that is 2 cm (0.79″) thick.
Instrument Quality Certificate for Traceability
HI151 is calibrated to five points (-20.0, 0.0, 25.0, 60.0 and 120.0 ℃) and tested at three points using reference meters, the accuracy of which is traceable to NIST in the USA or an internationally acceptable national physical standards. Each meter is serialized and supplied with an instrument quality certificate
CAL-Check
With all thermometers there is drift in the electronics over time. Every time the thermometer is switched ON the LCD will display “CAL” then “-0-”, indicating that the factory calibration has been verified and the thermometer is ready for use.
Wake on Motion Sensor
The meter has an adjustable power save mode that can be disabled. The power save mode can be programmed to turn the display off and conserve power after 1, 2, 8, or 60 minutes. The built-in motion sensor detects when the meter is picked up and automatically turns the display back on.
Checktemp®4 Temperature Tester – HI151
HI151 Checktemp 4 is supplied with batteries, quality certificate, and instruction manual.
| SKU | HI151-300 |
| Name | Checktemp® 4 Folding Thermometer – HI151-Yellow-Yes |
| Thermistor Temperature Range | -50.0 to 300 ?C / -58.0 to 572 ?F |
| Thermistor Temperature Resolution | 0.1 ?C (-50.0 to 199.9 ?C); 1 ?C (200 to 300 ?C) 0.1 ?F (-58.0 to 199.9 ?F); 1 ?F (200 to 572 ?F) |
| Thermistor Temperature Accuracy | ? 0.2 ?C (-30.0 to 170.0 ?C); ? 0.4 ?C (-50.0 to -30.0 ?C and 170.0 to 199.9 ?C); ? 1 ?C (200 to 300 ?C) ? 1 digit ?0.4 ?F (-22.0 to 199.9 ?F); ?0.8 ?F (-58.0 to -22.0 ?F); ?1 ?F (200 to 392 ?F); ?2 ?F (392 to 572 ?F) ? 1 digit |
| Automatic Shut-Off | power save settings: 1 min, 2 min (default), 8 min, 60 m in. or OFF |
| Battery Type/Life | CR2032 3V x 2 pcs. / approx. 4000 hours of use |
| Environment | -20.0 to 50.0 ?C (-4.0 to 122.0 ?F) |
| Dimensions | 165 x 45 x 24 mm (6.5 x 1.8 x 0.9”) |
| Weight | 85 g (3.0 oz) |
Checktemp® 4 Folding Thermometer - HI151-Yellow-No
Ergonomic Design with Rubberized Grip
Checktemp® 4 has an ergonomic design that fits comfortably in the hand. The meter uses vulcanized rubber that is available in 6 different colors for a non-slip grip.
Waterproof Durable Casing
The Checktemp thermometer is completely waterproof to IP67 standards. The IP67 standard is for continuous immersion in water up to 1 meter (3′) in depth. The meters will actually float if accidentally dropped into a pot, vat or any other container.
Penetration Probe
The sharp, AISI 316 stainless steel probe is ideal for testing fresh, cooked and semi frozen food. The NTC thermistor is located in the sensing tip and allows for the measurement of food that is 2 cm (0.79″) thick.
Instrument Quality Certificate for Traceability
HI151 is calibrated to five points (-20.0, 0.0, 25.0, 60.0 and 120.0 ℃) and tested at three points using reference meters, the accuracy of which is traceable to NIST in the USA or an internationally acceptable national physical standards. Each meter is serialized and supplied with an instrument quality certificate
CAL-Check
With all thermometers there is drift in the electronics over time. Every time the thermometer is switched ON the LCD will display “CAL” then “-0-”, indicating that the factory calibration has been verified and the thermometer is ready for use.
Wake on Motion Sensor
The meter has an adjustable power save mode that can be disabled. The power save mode can be programmed to turn the display off and conserve power after 1, 2, 8, or 60 minutes. The built-in motion sensor detects when the meter is picked up and automatically turns the display back on.
Checktemp®4 Temperature Tester – HI151
HI151 Checktemp 4 is supplied with batteries, quality certificate, and instruction manual.
| SKU | HI151-3 |
| Name | Checktemp® 4 Folding Thermometer – HI151-Yellow-No |
| Thermistor Temperature Range | -50.0 to 300 ?C / -58.0 to 572 ?F |
| Thermistor Temperature Resolution | 0.1 ?C (-50.0 to 199.9 ?C); 1 ?C (200 to 300 ?C) 0.1 ?F (-58.0 to 199.9 ?F); 1 ?F (200 to 572 ?F) |
| Thermistor Temperature Accuracy | ? 0.2 ?C (-30.0 to 170.0 ?C); ? 0.4 ?C (-50.0 to -30.0 ?C and 170.0 to 199.9 ?C); ? 1 ?C (200 to 300 ?C) ? 1 digit ?0.4 ?F (-22.0 to 199.9 ?F); ?0.8 ?F (-58.0 to -22.0 ?F); ?1 ?F (200 to 392 ?F); ?2 ?F (392 to 572 ?F) ? 1 digit |
| Automatic Shut-Off | power save settings: 1 min, 2 min (default), 8 min, 60 m in. or OFF |
| Battery Type/Life | CR2032 3V x 2 pcs. / approx. 4000 hours of use |
| Environment | -20.0 to 50.0 ?C (-4.0 to 122.0 ?F) |
| Dimensions | 165 x 45 x 24 mm (6.5 x 1.8 x 0.9”) |
| Weight | 85 g (3.0 oz) |
Checktemp® 4 Folding Thermometer - HI151-Blue-Yes
Ergonomic Design with Rubberized Grip
Checktemp® 4 has an ergonomic design that fits comfortably in the hand. The meter uses vulcanized rubber that is available in 6 different colors for a non-slip grip.
Waterproof Durable Casing
The Checktemp thermometer is completely waterproof to IP67 standards. The IP67 standard is for continuous immersion in water up to 1 meter (3′) in depth. The meters will actually float if accidentally dropped into a pot, vat or any other container.
Penetration Probe
The sharp, AISI 316 stainless steel probe is ideal for testing fresh, cooked and semi frozen food. The NTC thermistor is located in the sensing tip and allows for the measurement of food that is 2 cm (0.79″) thick.
Instrument Quality Certificate for Traceability
HI151 is calibrated to five points (-20.0, 0.0, 25.0, 60.0 and 120.0 ℃) and tested at three points using reference meters, the accuracy of which is traceable to NIST in the USA or an internationally acceptable national physical standards. Each meter is serialized and supplied with an instrument quality certificate
CAL-Check
With all thermometers there is drift in the electronics over time. Every time the thermometer is switched ON the LCD will display “CAL” then “-0-”, indicating that the factory calibration has been verified and the thermometer is ready for use.
Wake on Motion Sensor
The meter has an adjustable power save mode that can be disabled. The power save mode can be programmed to turn the display off and conserve power after 1, 2, 8, or 60 minutes. The built-in motion sensor detects when the meter is picked up and automatically turns the display back on.
Checktemp®4 Temperature Tester – HI151
HI151 Checktemp 4 is supplied with batteries, quality certificate, and instruction manual.
| SKU | HI151-200 |
| Name | Checktemp® 4 Folding Thermometer – HI151-Blue-Yes |
| Thermistor Temperature Range | -50.0 to 300 ?C / -58.0 to 572 ?F |
| Thermistor Temperature Resolution | 0.1 ?C (-50.0 to 199.9 ?C); 1 ?C (200 to 300 ?C) 0.1 ?F (-58.0 to 199.9 ?F); 1 ?F (200 to 572 ?F) |
| Thermistor Temperature Accuracy | ? 0.2 ?C (-30.0 to 170.0 ?C); ? 0.4 ?C (-50.0 to -30.0 ?C and 170.0 to 199.9 ?C); ? 1 ?C (200 to 300 ?C) ? 1 digit ?0.4 ?F (-22.0 to 199.9 ?F); ?0.8 ?F (-58.0 to -22.0 ?F); ?1 ?F (200 to 392 ?F); ?2 ?F (392 to 572 ?F) ? 1 digit |
| Automatic Shut-Off | power save settings: 1 min, 2 min (default), 8 min, 60 m in. or OFF |
| Battery Type/Life | CR2032 3V x 2 pcs. / approx. 4000 hours of use |
| Environment | -20.0 to 50.0 ?C (-4.0 to 122.0 ?F) |
| Dimensions | 165 x 45 x 24 mm (6.5 x 1.8 x 0.9”) |
| Weight | 85 g (3.0 oz) |
Checktemp® 4 Folding Thermometer - HI151-Blue-No
Ergonomic Design with Rubberized Grip
Checktemp® 4 has an ergonomic design that fits comfortably in the hand. The meter uses vulcanized rubber that is available in 6 different colors for a non-slip grip.
Waterproof Durable Casing
The Checktemp thermometer is completely waterproof to IP67 standards. The IP67 standard is for continuous immersion in water up to 1 meter (3′) in depth. The meters will actually float if accidentally dropped into a pot, vat or any other container.
Penetration Probe
The sharp, AISI 316 stainless steel probe is ideal for testing fresh, cooked and semi frozen food. The NTC thermistor is located in the sensing tip and allows for the measurement of food that is 2 cm (0.79″) thick.
Instrument Quality Certificate for Traceability
HI151 is calibrated to five points (-20.0, 0.0, 25.0, 60.0 and 120.0 ℃) and tested at three points using reference meters, the accuracy of which is traceable to NIST in the USA or an internationally acceptable national physical standards. Each meter is serialized and supplied with an instrument quality certificate
CAL-Check
With all thermometers there is drift in the electronics over time. Every time the thermometer is switched ON the LCD will display “CAL” then “-0-”, indicating that the factory calibration has been verified and the thermometer is ready for use.
Wake on Motion Sensor
The meter has an adjustable power save mode that can be disabled. The power save mode can be programmed to turn the display off and conserve power after 1, 2, 8, or 60 minutes. The built-in motion sensor detects when the meter is picked up and automatically turns the display back on.
Checktemp®4 Temperature Tester – HI151
HI151 Checktemp 4 is supplied with batteries, quality certificate, and instruction manual.
| SKU | HI151-2 |
| Name | Checktemp® 4 Folding Thermometer – HI151-Blue-No |
| Thermistor Temperature Range | -50.0 to 300 ?C / -58.0 to 572 ?F |
| Thermistor Temperature Resolution | 0.1 ?C (-50.0 to 199.9 ?C); 1 ?C (200 to 300 ?C) 0.1 ?F (-58.0 to 199.9 ?F); 1 ?F (200 to 572 ?F) |
| Thermistor Temperature Accuracy | ? 0.2 ?C (-30.0 to 170.0 ?C); ? 0.4 ?C (-50.0 to -30.0 ?C and 170.0 to 199.9 ?C); ? 1 ?C (200 to 300 ?C) ? 1 digit ?0.4 ?F (-22.0 to 199.9 ?F); ?0.8 ?F (-58.0 to -22.0 ?F); ?1 ?F (200 to 392 ?F); ?2 ?F (392 to 572 ?F) ? 1 digit |
| Automatic Shut-Off | power save settings: 1 min, 2 min (default), 8 min, 60 m in. or OFF |
| Battery Type/Life | CR2032 3V x 2 pcs. / approx. 4000 hours of use |
| Environment | -20.0 to 50.0 ?C (-4.0 to 122.0 ?F) |
| Dimensions | 165 x 45 x 24 mm (6.5 x 1.8 x 0.9”) |
| Weight | 85 g (3.0 oz) |
Checktemp® 4 Folding Thermometer - HI151-Red-Yes
Ergonomic Design with Rubberized Grip
Checktemp® 4 has an ergonomic design that fits comfortably in the hand. The meter uses vulcanized rubber that is available in 6 different colors for a non-slip grip.
Waterproof Durable Casing
The Checktemp thermometer is completely waterproof to IP67 standards. The IP67 standard is for continuous immersion in water up to 1 meter (3′) in depth. The meters will actually float if accidentally dropped into a pot, vat or any other container.
Penetration Probe
The sharp, AISI 316 stainless steel probe is ideal for testing fresh, cooked and semi frozen food. The NTC thermistor is located in the sensing tip and allows for the measurement of food that is 2 cm (0.79″) thick.
Instrument Quality Certificate for Traceability
HI151 is calibrated to five points (-20.0, 0.0, 25.0, 60.0 and 120.0 ℃) and tested at three points using reference meters, the accuracy of which is traceable to NIST in the USA or an internationally acceptable national physical standards. Each meter is serialized and supplied with an instrument quality certificate
CAL-Check
With all thermometers there is drift in the electronics over time. Every time the thermometer is switched ON the LCD will display “CAL” then “-0-”, indicating that the factory calibration has been verified and the thermometer is ready for use.
Wake on Motion Sensor
The meter has an adjustable power save mode that can be disabled. The power save mode can be programmed to turn the display off and conserve power after 1, 2, 8, or 60 minutes. The built-in motion sensor detects when the meter is picked up and automatically turns the display back on.
Checktemp®4 Temperature Tester – HI151
HI151 Checktemp 4 is supplied with batteries, quality certificate, and instruction manual.
| SKU | HI151-100 |
| Name | Checktemp® 4 Folding Thermometer – HI151-Red-Yes |
| Thermistor Temperature Range | -50.0 to 300 ?C / -58.0 to 572 ?F |
| Thermistor Temperature Resolution | 0.1 ?C (-50.0 to 199.9 ?C); 1 ?C (200 to 300 ?C) 0.1 ?F (-58.0 to 199.9 ?F); 1 ?F (200 to 572 ?F) |
| Thermistor Temperature Accuracy | ? 0.2 ?C (-30.0 to 170.0 ?C); ? 0.4 ?C (-50.0 to -30.0 ?C and 170.0 to 199.9 ?C); ? 1 ?C (200 to 300 ?C) ? 1 digit ?0.4 ?F (-22.0 to 199.9 ?F); ?0.8 ?F (-58.0 to -22.0 ?F); ?1 ?F (200 to 392 ?F); ?2 ?F (392 to 572 ?F) ? 1 digit |
| Automatic Shut-Off | power save settings: 1 min, 2 min (default), 8 min, 60 m in. or OFF |
| Battery Type/Life | CR2032 3V x 2 pcs. / approx. 4000 hours of use |
| Environment | -20.0 to 50.0 ?C (-4.0 to 122.0 ?F) |
| Dimensions | 165 x 45 x 24 mm (6.5 x 1.8 x 0.9”) |
| Weight | 85 g (3.0 oz) |
Checktemp® 4 Folding Thermometer - HI151-Red-No
Ergonomic Design with Rubberized Grip
Checktemp® 4 has an ergonomic design that fits comfortably in the hand. The meter uses vulcanized rubber that is available in 6 different colors for a non-slip grip.
Waterproof Durable Casing
The Checktemp thermometer is completely waterproof to IP67 standards. The IP67 standard is for continuous immersion in water up to 1 meter (3′) in depth. The meters will actually float if accidentally dropped into a pot, vat or any other container.
Penetration Probe
The sharp, AISI 316 stainless steel probe is ideal for testing fresh, cooked and semi frozen food. The NTC thermistor is located in the sensing tip and allows for the measurement of food that is 2 cm (0.79″) thick.
Instrument Quality Certificate for Traceability
HI151 is calibrated to five points (-20.0, 0.0, 25.0, 60.0 and 120.0 ℃) and tested at three points using reference meters, the accuracy of which is traceable to NIST in the USA or an internationally acceptable national physical standards. Each meter is serialized and supplied with an instrument quality certificate
CAL-Check
With all thermometers there is drift in the electronics over time. Every time the thermometer is switched ON the LCD will display “CAL” then “-0-”, indicating that the factory calibration has been verified and the thermometer is ready for use.
Wake on Motion Sensor
The meter has an adjustable power save mode that can be disabled. The power save mode can be programmed to turn the display off and conserve power after 1, 2, 8, or 60 minutes. The built-in motion sensor detects when the meter is picked up and automatically turns the display back on.
Checktemp®4 Temperature Tester – HI151
HI151 Checktemp 4 is supplied with batteries, quality certificate, and instruction manual.
| SKU | HI151-1 |
| Name | Checktemp® 4 Folding Thermometer – HI151-Red-No |
| Thermistor Temperature Range | -50.0 to 300 ?C / -58.0 to 572 ?F |
| Thermistor Temperature Resolution | 0.1 ?C (-50.0 to 199.9 ?C); 1 ?C (200 to 300 ?C) 0.1 ?F (-58.0 to 199.9 ?F); 1 ?F (200 to 572 ?F) |
| Thermistor Temperature Accuracy | ? 0.2 ?C (-30.0 to 170.0 ?C); ? 0.4 ?C (-50.0 to -30.0 ?C and 170.0 to 199.9 ?C); ? 1 ?C (200 to 300 ?C) ? 1 digit ?0.4 ?F (-22.0 to 199.9 ?F); ?0.8 ?F (-58.0 to -22.0 ?F); ?1 ?F (200 to 392 ?F); ?2 ?F (392 to 572 ?F) ? 1 digit |
| Automatic Shut-Off | power save settings: 1 min, 2 min (default), 8 min, 60 m in. or OFF |
| Battery Type/Life | CR2032 3V x 2 pcs. / approx. 4000 hours of use |
| Environment | -20.0 to 50.0 ?C (-4.0 to 122.0 ?F) |
| Dimensions | 165 x 45 x 24 mm (6.5 x 1.8 x 0.9”) |
| Weight | 85 g (3.0 oz) |
Checktemp® 4 Folding Thermometer - HI151-White-Yes
Ergonomic Design with Rubberized Grip
Checktemp® 4 has an ergonomic design that fits comfortably in the hand. The meter uses vulcanized rubber that is available in 6 different colors for a non-slip grip.
Waterproof Durable Casing
The Checktemp thermometer is completely waterproof to IP67 standards. The IP67 standard is for continuous immersion in water up to 1 meter (3′) in depth. The meters will actually float if accidentally dropped into a pot, vat or any other container.
Penetration Probe
The sharp, AISI 316 stainless steel probe is ideal for testing fresh, cooked and semi frozen food. The NTC thermistor is located in the sensing tip and allows for the measurement of food that is 2 cm (0.79″) thick.
Instrument Quality Certificate for Traceability
HI151 is calibrated to five points (-20.0, 0.0, 25.0, 60.0 and 120.0 ℃) and tested at three points using reference meters, the accuracy of which is traceable to NIST in the USA or an internationally acceptable national physical standards. Each meter is serialized and supplied with an instrument quality certificate
CAL-Check
With all thermometers there is drift in the electronics over time. Every time the thermometer is switched ON the LCD will display “CAL” then “-0-”, indicating that the factory calibration has been verified and the thermometer is ready for use.
Wake on Motion Sensor
The meter has an adjustable power save mode that can be disabled. The power save mode can be programmed to turn the display off and conserve power after 1, 2, 8, or 60 minutes. The built-in motion sensor detects when the meter is picked up and automatically turns the display back on.
Checktemp®4 Temperature Tester – HI151
HI151 Checktemp 4 is supplied with batteries, quality certificate, and instruction manual.
| SKU | HI151-000 |
| Name | Checktemp® 4 Folding Thermometer – HI151-White-Yes |
| Thermistor Temperature Range | -50.0 to 300 ?C / -58.0 to 572 ?F |
| Thermistor Temperature Resolution | 0.1 ?C (-50.0 to 199.9 ?C); 1 ?C (200 to 300 ?C) 0.1 ?F (-58.0 to 199.9 ?F); 1 ?F (200 to 572 ?F) |
| Thermistor Temperature Accuracy | ? 0.2 ?C (-30.0 to 170.0 ?C); ? 0.4 ?C (-50.0 to -30.0 ?C and 170.0 to 199.9 ?C); ? 1 ?C (200 to 300 ?C) ? 1 digit ?0.4 ?F (-22.0 to 199.9 ?F); ?0.8 ?F (-58.0 to -22.0 ?F); ?1 ?F (200 to 392 ?F); ?2 ?F (392 to 572 ?F) ? 1 digit |
| Automatic Shut-Off | power save settings: 1 min, 2 min (default), 8 min, 60 m in. or OFF |
| Battery Type/Life | CR2032 3V x 2 pcs. / approx. 4000 hours of use |
| Environment | -20.0 to 50.0 ?C (-4.0 to 122.0 ?F) |
| Dimensions | 165 x 45 x 24 mm (6.5 x 1.8 x 0.9”) |
| Weight | 85 g (3.0 oz) |
T-Shaped Fahrenheit Thermometer (300mm) - HI145-30
HI145 thermometers were developed for HACCP programs that require high standards of performance with simplicity of use. The durable T-shaped handle fits comfortably in hand and is ideal for applications where applied force is necessary for insertion, such as with incoming meat inspection and semi-frozen foods. The LCD positioned on top of the meter allows for easy reading in cooking applications.
CAL Check™ – When the HI145 is turned on, a calibration test is immediately performed. With this unique feature, the HI145 series performs a self-check of its calibration status and displays it on the LCD, ensuring accuracy, repeatability, and condence in readings.
HACCP Compliant – The HI145 is in compliance with food regulations, making it an ideal instrument for use as a tool for control in HACCP analysis.
AISI 316 Stainless Steel Probe – The HI145 thermometer is equipped with a 300 mm (12″) long AISI 316 stainless steel probe, ideal for monitoring hot liquids, such as in deep frying and soup preparation.
Enhanced Battery Life– The HI145 uses AAA batteries and offers an exceptional 10, 000 hours of continuous use.
Auto Shut-off– The battery life of the thermometer is preserved by this feature which automatically turns the meter off after 8 minutes of non-use.
HI145-30 is supplied complete with 300mm probe, battery, and instruction manual.
| SKU | HI145-30 |
| Name | T-Shaped Fahrenheit Thermometer (300mm) – HI145-30 |
| Temperature Range | -58.0 to 428?F |
| Temperature Resolution | 0.1?F (-58.0 to 199.9?F); 1?F (200 to 428?F) |
| Temperature Accuracy | ?0.6?F (-4 to 194?F); ?0.4% F.S. (outside) |
| Automatic Shut-Off | after 8 minutes of non-use |
| Battery Type/Life | 1.5V AAA / approximately 10,000 hours of continuous use |
| Environment | -10 to 50?C (14 to 122?F); RH max 95% |
| Dimensions | 92 x 340 x 38 mm (3.6 x 13.4 x 1.5”) |
| Weight | 80 g (2.8 oz.) |
T-Shaped Celsius Thermometer (300mm) - HI145-20
HI145 thermometers were developed for HACCP programs that require high standards of performance with simplicity of use. The durable T-shaped handle fits comfortably in hand and is ideal for applications where applied force is necessary for insertion, such as with incoming meat inspection and semi-frozen foods. The LCD positioned on top of the meter allows for easy reading in cooking applications.
CAL Check™ – When the HI145 is turned on, a calibration test is immediately performed. With this unique feature, the HI145 series performs a self-check of its calibration status and displays it on the LCD, ensuring accuracy, repeatability, and condence in readings.
HACCP Compliant – The HI145 is in compliance with food regulations, making it an ideal instrument for use as a tool for control in HACCP analysis.
AISI 316 Stainless Steel Probe – The HI145 thermometer is equipped with a 300 mm (12″) long AISI 316 stainless steel probe, ideal for monitoring hot liquids, such as in deep frying and soup preparation.
Enhanced Battery Life– The HI145 uses AAA batteries and offers an exceptional 10, 000 hours of continuous use.
Auto Shut-off– The battery life of the thermometer is preserved by this feature which automatically turns the meter off after 8 minutes of non-use.
HI145-20 is supplied complete with 300mm probe, battery, and instruction manual.
| SKU | HI145-20 |
| Name | T-Shaped Celsius Thermometer (300mm) – HI145-20 |
| Temperature Range | -50.0 to 220?C |
| Temperature Resolution | 0.1?C (-50.0 to 199.9?C); 1?C (200 to 220?C) |
| Temperature Accuracy | ?0.3?C (-20 to 90?C); ?0.4% F.S. (outside) |
| Automatic Shut-Off | after 8 minutes of non-use |
| Battery Type/Life | 1.5V AAA / approximately 10,000 hours of continuous use |
| Environment | -10 to 50?C (14 to 122?F); RH max 95% |
| Dimensions | 92 x 340 x 38 mm (3.6 x 13.4 x 1.5”) |
| Weight | 80 g (2.8 oz.) |
T-Shaped Fahrenheit Thermometer (125mm) - HI145-01
HI145 thermometers were developed for HACCP programs that require high standards of performance with simplicity of use. The durable T-shaped handle fits comfortably in hand and is ideal for applications where applied force is necessary for insertion, such as with incoming meat inspection and semi-frozen foods. The LCD positioned on top of the meter allows for easy reading in cooking applications.
CAL Check™ – When the HI145 is turned on, a calibration test is immediately performed. With this unique feature, the HI145 series performs a self-check of its calibration status and displays it on the LCD, ensuring accuracy, repeatability, and condence in readings.
HACCP Compliant – The HI145 is in compliance with food regulations, making it an ideal instrument for use as a tool for control in HACCP analysis.
AISI 316 Stainless Steel Probe – The HI145 thermometer is equipped with a 125 mm (5″) long AISI 316 stainless steel probe. The sharp conical tip provides fast response and improved accuracy over the entire range.
Enhanced Battery Life– The HI145 uses AAA batteries and offers an exceptional 10, 000 hours of continuous use.
Auto Shut-off– The battery life of the thermometer is preserved by this feature which automatically turns the meter off after 8 minutes of non-use.
HI145-01 is supplied complete with 125 mm probe, battery, and instruction manual.
| SKU | HI145-01 |
| Name | T-Shaped Fahrenheit Thermometer (125mm) – HI145-01 |
| Temperature Range | -58.0 to 428?F |
| Temperature Resolution | 0.1?F (-58.0 to 199.9?F); 1?F (200 to 428?F) |
| Temperature Accuracy | ?0.6?F (-4 to 194?F); ?0.4% F.S. (outside) |
| Automatic Shut-Off | after 8 minutes of non-use |
| Battery Type/Life | 1.5V AAA / approximately 10,000 hours of continuous use |
| Environment | -10 to 50?C (14 to 122?F); RH max 95% |
| Dimensions | 92 x 165 x 38 mm (3.6 x 6.5 x 1.5”) |
| Weight | 65 g (2.3 oz) |
T-Shaped Celsius Thermometer (125mm) - HI145-00
HI145 thermometers were developed for HACCP programs that require high standards of performance with simplicity of use. The durable T-shaped handle fits comfortably in hand and is ideal for applications where applied force is necessary for insertion, such as with incoming meat inspection and semi-frozen foods. The LCD positioned on top of the meter allows for easy reading in cooking applications.
CAL Check™ – When the HI145 is turned on, a calibration test is immediately performed. With this unique feature, the HI145 series performs a self-check of its calibration status and displays it on the LCD, ensuring accuracy, repeatability, and condence in readings.
HACCP Compliant – The HI145 is in compliance with food regulations, making it an ideal instrument for use as a tool for control in HACCP analysis.
AISI 316 Stainless Steel Probe – The HI145 thermometer is equipped with a 125 mm (5″) long AISI 316 stainless steel probe. The sharp conical tip provides fast response and improved accuracy over the entire range.
Enhanced Battery Life– The HI145 uses AAA batteries and offers an exceptional 10, 000 hours of continuous use.
Auto Shut-off– The battery life of the thermometer is preserved by this feature which automatically turns the meter off after 8 minutes of non-use.
HI145-00 is supplied complete with 125 mm probe, battery, and instruction manual.
| SKU | HI145-00 |
| Name | T-Shaped Celsius Thermometer (125mm) – HI145-00 |
| Temperature Range | -50.0 to 220?C |
| Temperature Resolution | 0.1?C (-50.0 to 199.9?C); 1?C (200 to 220?C) |
| Temperature Accuracy | ?0.3?C (-20 to 90?C); ?0.4% F.S. (outside) |
| Automatic Shut-Off | after 8 minutes of non-use |
| Battery Type/Life | 1.5V AAA / approximately 10,000 hours of continuous use |
| Environment | -10 to 50?C (14 to 122?F); RH max 95% |
| Dimensions | 92 x 165 x 38 mm (3.6 x 6.5 x 1.5”) |
| Weight | 65 g (2.3 oz) |
