Testers
pH/ORP
ISE
EC/TDS/Salinity
Dissolved Oxygen
Multiparameter
Autosampler Titrators
Karl Fischer Titrators
Mini Titrators
Potentiometric Titrators
Benchtops
Checker Colorimeters
Portable Photometers
Spectrophotometers
Benchtops Turbidimeters
Portable Turbidimeters
Testers
Thermocouples
Thermistors
Pt100
Monitors
Backpacks Labs
Single Parameters
ABS Plastic
Stainless Steel
Monitors
Dataloggers
Controllers and Transmitters
Dosing Pumps
Mini Controllers
PCA Chlorine
Probes
Swimming Pool and Spa Controllers
pH
ORP
ISE
TDS
Dissolved Oxygen
Temperature
Multiparameter
Bluetooth
Photometric Probes
Checker HC
Chemical Test Kits
Photometers
Titration
Calibration Solutions
Fill Solutions
Storage Solutions
Cleaning Solutions
Sample Prep Solutions
ISE Solutions
Titration Solutions
CAL Check Standards
- Checker HC Colorimeters
- COD Meters
- Dissolved Oxygen
- ISE Meters
- Lab Supply
- Multiparameter Meters
- pH Meters
- Photometers
- Resistivity
- Testers
- Thermometers
- Titrators
- Turbidity Meters
Temperature Testers
Pool Line Digital Thermometer - HI985394
The Checktemp Digital Thermometer is a high-accuracy NTC thermistor thermometer connected to a weighted, stainless steel probe by a 3 m (9.9’) flexible, silicone cable.
The weighted, stainless steel probe is designed to measure temperature in swimming pools and hot tubs. Attached to the meter by 3 m of cable, the probe is capable of taking temperature readings at various depths. The probe is made of AISI 316 stainless steel, which makes it easy to clean.
The HI985394 Pool Line Digital Thermometer is equipped with Hanna’s exclusive CAL Check® feature for reliable and accurate measurements. CAL Check automatically runs a self-check upon startup and looks for any drift in the internal electronics. The thermometer then reports the instruments status back to the user in a matter of seconds; 0 for ok and Err if something is wrong.
Features at-a-glance:
- AISI 316 stainless steel weighted probe
- ±0.3℃ (±0.5℉) Accuracy
- CAL Check™ – Automatically verifies calibration at startup
- ℃/℉ readout – User selectable
- IP 65 water resistant protection
- User-selectable auto-off (select from 8 min., 60 min., or disable)
HI985394 Pool Line Digital Thermometer uses a weighted, stainless steel probe with a 3 m (9.9’) flexible, silicone cable. The probe incorporates an NTC thermistor sensor, providing an extremely accurate temperature measurement at a variety of depths in swimming pools and hot tubs.
- CAL Check™ to verify internal electronics of the meter
- Selectable ℃/℉ readout
- Weighted AISI 316 Stainless Steel Probe
SKU | HI985394 |
Name | Pool Line Digital Thermometer – HI985394 |
Temperature Range | -20.0 to 80.0?C (-4.0 to 176.0?F) |
Temperature Resolution | 0.1?C (0.1?F) |
Temperature Accuracy | ?0.3?C (?0.5?F) |
Temperature Probe | Weighted stainless steel probe with silicone cable (3 m / 9.9’) |
Automatic Shut-Off | 8 minutes (default), 60 minutes, or disabled |
Battery Type/Life | 1.5V AAA alkaline (3) / approximately 2 years of use |
Environment | -30 to 50?C (-22 to 122 ?F); IP65 |
Dimensions | 107 x 59 x 17 mm (4.2 x 2.3 x 0.7”) |
Weight | 109 g (3.8 oz.) |
Checktemp® 1 Digital Thermometer - HI98509
The Checktemp® 1 Digital Thermometer – HI98509 is a high-accuracy thermometer with a 1 m (3.3′) flexible, silicone cable connecting the meter and the stainless steel probe. The sharp-tip penetration probe easily lances semi-solid products such as fruits, vegetables, and cheeses. This probe can also handle liquid, air and measurements in frozen materials. The probe incorporates an NTC thermistor sensor to measure the temperature.
Thermistors make it possible to obtain extremely high accuracy in a very short period of time. The Hanna CAL Check™ feature has been incorporated into the Checktemp®1 for reliable and accurate measurements. CAL Check™ automatically runs a self-check upon startup and reports status back to the user; “-0-” for ok and “Err” if something is wrong.
Checktemp®1 makes routine controls fast and simple for both incoming and outgoing goods. Constructed of AISI 316 stainless steel material, this probe is in compliance with food regulations, making it an ideal instrument for measuring temperature according to HACCP requirements.
Features at-a-glance:
- ±0.2℃ (±0.5℉) – Accuracy
- Most accurate temperature tester in the world
- CAL Check™ – Automatically verifies calibration at startup
- Silicone probe cable – 3.3′ silicone cable maintains flexibility and performance
- ℃/℉ Status – User selectable
- Large display with wide environmental temperature range and viewing angle.
- IP 65 water resistant protection
- HACCP Compatible – Use as a tool for control in HACCP analysis
- AISI 316 stainless steel penetration Probe
- Auto-Off (select from 8 min., 60 min., or turn the feature off)
The HI98509 Checktemp® 1 is a high-accuracy thermometer with a 1 m (3.3’) flexible, silicone cable connecting the meter and the stainless steel probe. The sharp-tip penetration probe easily lances semi-solid products such as fruits, vegetables, and cheeses. This probe can also handle liquid, air and measurements in frozen materials. The probe incorporates an NTC thermistor sensor to measure the temperature.
- CAL Check™
- ℃/℉ readout
SKU | HI98509 |
Name | Checktemp® 1 Digital Thermometer – HI98509 |
Temperature Range | -50.0 to 150.0 ?C / -58.0 to 302 ?F |
Temperature Resolution | 0.1 ?C (-50.0 to 150.0 ?C) |
Temperature Accuracy | ?0.2 ?C (-30.0 to 120.0 ?C) |
Temperature Probe | stainless steel, 1 m (3.3 in.) cable |
Automatic Shut-Off | 8 min (default), 60 min or OFF |
Battery Type/Life | 3 x 1.5 V AAA alkaline; approx. 2 years |
Environment | -30 to 50 ?C (-22 to 122 ?F) |
Dimensions | 107 x 59 x 17 mm (4.2 x 5.3 x 0.7 in.) |
Weight | 130 g (4.6 oz. |
Notes | Certication: EN 13485:2001 – Suitability: Storage; Environment: E; Accuracy Class: 0.5; Protection: IP65 |
Checktemp® Digital Thermometer - HI98501
The HI 98501 Checktemp® is a digital thermometer with stainless steel penetration probe. It delivers high accuracy temperature measurements over a wide temperature range without worrying about breakage or condensation.
The Checktemp® offers NO breakage, NO waste, NO injuries and NO difficulty in reading; the digital display prevents a parallax error (observing the wrong measurement due to the angle of view) and is optimized for a wide range of environmental temperatures. Checktemp® is provided with Hanna’s unique CAL Check™ function for accurate measurements every time. The Checktemp® implements a CAL Check™ upon startup and reports the status as 0 or Err.
The sharp-tip probe of the Checktemp® easily penetrates semi-solid products making routine temperature checks simple and quick for both incoming and outgoing goods. Checktemp® is the ideal instrument for measuring temperature according to HACCP requirements.
Features at-a-glance:
- ±0.2℃ (±0.5℉) – Accuracy
- Most accurate temperature tester in the world
- CAL Check™ – Automatically verifies calibration at startup
- ℃/℉ Status – User selectable
- Large display with wide environmental temperature range and viewing angle.
- IP 65 water resistant protection
- HACCP Compatible – Use as a tool for control in HACCP analysis
- AISI 316 stainless steel penetration Probe
- 3000 hours of battery life (Continuous use)
- Auto-Off (select from 8 min., 60 min., or turn the feature off)
The HI98501 Checktemp® is a digital thermometer with stainless steel penetration probe. It delivers high accuracy temperature measurements over a wide temperature range without worrying about breakage or condensation.
- CAL Check™
- ℃/℉ readout
SKU | HI98501 |
Name | Checktemp® Digital Thermometer – HI98501 |
Temperature Range | -50.0 to 150.0 ?C / -58.0 to 302 ?F |
Temperature Resolution | 0.1 ?C (-50.0 to 150.0 ?C) |
Temperature Accuracy | ?0.2 ?C (-30.0 to 120.0 ?C) |
Automatic Shut-Off | 8 min (default), 60 min or OFF |
Battery Type/Life | 1 x CR2032; approx. 2000 hours of continuous use |
Environment | -30 to 50 ?C (-22 to 122 ?F) |
Dimensions | 50 x 185 x 21 mm (2 x 7.3 x 0.9“) |
Weight | 50 g (1.8 oz.) |
Notes | Certication: EN 13485:2001 – Suitability: Storage; Environment: E; Accuracy Class: 0.5; IP65 |
Checktemp Dip Digital Thermometer - HI98539
The Checktemp Dip Digital Thermometer is a high-accuracy NTC thermistor thermometer connected to a weighted, stainless steel probe by a 3 m (9.9′) flexible, silicone cable.
The weighted, stainless steel probe is designed to measure temperature in tanks, vats, streams, and lakes. Attached to the meter by 3 m of cable, the probe is capable of taking temperature readings at various depths. The probe is made of AISI 316 stainless steel which makes it easy to clean and ideal for temperature measurement in a variety of food and beverage applications such as in wine casks or milk storage tanks. The HI98539 Checktemp Dip is equipped with Hanna’s exclusive CAL Check® feature for reliable and accurate measurements. CAL Check automatically runs a self-check upon startup and looks for any drift in the internal electronics. The Checktemp Dip then reports the instruments status back to the user in a matter of seconds; 0 for ok and Err if something is wrong.
Features at-a-glance:
- ±0.3℃ (±0.5℉) Accuracy
- CAL Check™ – Automatically verifies calibration at startup
- 3 m (9.9′) silicone cable
- ℃/℉ readout – User selectable
- Clear LCD display that is easy to read
- IP 65 water resistant protection
- HACCP Compatible – Use as a tool for control in HACCP analysis
- AISI 316 stainless steel weighted probe
- User-selectable auto-off (select from 8 min., 60 min., or disable)
The Checktemp Dip Digital Thermometer – HI98539 is a high-accuracy thermometer connected to a weighted, stainless steel probe by a 3 m (9.9’) flexible, silicone cable. The probe incorporates an NTC thermistor sensor, providing an extremely accurate temperature measurement that can satisfy your HACCP requirements.
- CAL Check™
- Selectable ℃/℉ readout
- AISI 316 Stainless Steel Probe
SKU | HI98539 |
Name | Checktemp Dip Digital Thermometer – HI98539 |
Thermistor Temperature Range | -20.0 to 80.0?C/ -4.0 to 176.0?F |
Thermistor Temperature Resolution | 0.1?C/ 0.1?F |
Thermistor Temperature Accuracy | ?0.3?C/ ?0.5 ?F |
Automatic Shut-Off | 8 min (default), 60 min or OFF |
Battery Type/Life | 3 x 1.5V AAA Batteries/Approximately 2 years of use |
Environment | -30 to 50?C (-22 to 122?F); RH max 95%; IP65 |
Dimensions | 107 x 59 x 17 mm (4.2 x 2.3 x 0.7”) |
Weight | 109 g (3.8 oz.) |
Checktemp® 4 Folding Thermometer - HI151
Ergonomic Design with Rubberized Grip
Checktemp® 4 has an ergonomic design that fits comfortably in the hand. The meter uses vulcanized rubber that is available in 6 different colors for a non-slip grip.
Waterproof Durable Casing
The Checktemp thermometer is completely waterproof to IP67 standards. The IP67 standard is for continuous immersion in water up to 1 meter (3′) in depth. The meters will actually float if accidentally dropped into a pot, vat or any other container.
Penetration Probe
The sharp, AISI 316 stainless steel probe is ideal for testing fresh, cooked and semi frozen food. The NTC thermistor is located in the sensing tip and allows for the measurement of food that is 2 cm (0.79″) thick.
Instrument Quality Certificate for Traceability
HI151 is calibrated to five points (-20.0, 0.0, 25.0, 60.0 and 120.0 ℃) and tested at three points using reference meters, the accuracy of which is traceable to NIST in the USA or an internationally acceptable national physical standards. Each meter is serialized and supplied with an instrument quality certificate
CAL-Check
With all thermometers there is drift in the electronics over time. Every time the thermometer is switched ON the LCD will display “CAL” then “-0-”, indicating that the factory calibration has been verified and the thermometer is ready for use.
Wake on Motion Sensor
The meter has an adjustable power save mode that can be disabled. The power save mode can be programmed to turn the display off and conserve power after 1, 2, 8, or 60 minutes. The built-in motion sensor detects when the meter is picked up and automatically turns the display back on.
Checktemp®4 Temperature Tester – HI151
The HI151 Checktemp® 4 is a folding thermistor thermometer that can measure temperature up to 300 ℃ (572 ℉). These thermometers offer many advanced features including CAL-Check for an internal verification of the electronics and a motion sensor which eliminates the need of closing and reopening the probe when the meter enters a power saving mode. The Checktemp 4 is available in six different colors which can be assigned to different products to avoid cross contamination in the restaurant, kitchen or production facility.
- CAL Check to verify meter performance
- Waterproof to IP67 Standards
- Wake on motion
SKU | HI151-web |
Name | Checktemp® 4 Folding Thermometer – HI151 |
Thermistor Temperature Range | -50.0 to 300 ?C / -58.0 to 572 ?F |
Thermistor Temperature Resolution | 0.1 ?C (-50.0 to 199.9 ?C); 1 ?C (200 to 300 ?C) |
Thermistor Temperature Accuracy | ? 0.2 ?C (-30.0 to 170.0 ?C); ? 0.4 ?C (-50.0 to -30.0 ?C and 170.0 to 199.9 ?C); ? 1 ?C (200 to 300 ?C) ? 1 digit |
Automatic Shut-Off | power save settings: 1 min, 2 min (default), 8 min, 60 m in. or OFF |
Battery Type/Life | CR2032 3V x 2 pcs. / approx. 4000 hours of use |
Environment | -20.0 to 50.0 ?C (-4.0 to 122.0 ?F) |
Dimensions | 165 x 45 x 24 mm (6.5 x 1.8 x 0.9”) |
Weight | 85 g (3.0 oz) |
Checktemp® 4 Folding Thermometer - HI151-Brown-Yes
Ergonomic Design with Rubberized Grip
Checktemp® 4 has an ergonomic design that fits comfortably in the hand. The meter uses vulcanized rubber that is available in 6 different colors for a non-slip grip.
Waterproof Durable Casing
The Checktemp thermometer is completely waterproof to IP67 standards. The IP67 standard is for continuous immersion in water up to 1 meter (3′) in depth. The meters will actually float if accidentally dropped into a pot, vat or any other container.
Penetration Probe
The sharp, AISI 316 stainless steel probe is ideal for testing fresh, cooked and semi frozen food. The NTC thermistor is located in the sensing tip and allows for the measurement of food that is 2 cm (0.79″) thick.
Instrument Quality Certificate for Traceability
HI151 is calibrated to five points (-20.0, 0.0, 25.0, 60.0 and 120.0 ℃) and tested at three points using reference meters, the accuracy of which is traceable to NIST in the USA or an internationally acceptable national physical standards. Each meter is serialized and supplied with an instrument quality certificate
CAL-Check
With all thermometers there is drift in the electronics over time. Every time the thermometer is switched ON the LCD will display “CAL” then “-0-”, indicating that the factory calibration has been verified and the thermometer is ready for use.
Wake on Motion Sensor
The meter has an adjustable power save mode that can be disabled. The power save mode can be programmed to turn the display off and conserve power after 1, 2, 8, or 60 minutes. The built-in motion sensor detects when the meter is picked up and automatically turns the display back on.
Checktemp®4 Temperature Tester – HI151
The HI151 Checktemp® 4 is a folding thermistor thermometer that can measure temperature up to 300 ℃ (572 ℉). These thermometers offer many advanced features including CAL-Check for an internal verification of the electronics and a motion sensor which eliminates the need of closing and reopening the probe when the meter enters a power saving mode. The Checktemp 4 is available in six different colors which can be assigned to different products to avoid cross contamination in the restaurant, kitchen or production facility.
- CAL Check to verify meter performance
- Waterproof to IP67 Standards
- Wake on motion
SKU | HI151-500 |
Name | Checktemp® 4 Folding Thermometer – HI151-Brown-Yes |
Thermistor Temperature Range | -50.0 to 300 ?C / -58.0 to 572 ?F |
Thermistor Temperature Resolution | 0.1 ?C (-50.0 to 199.9 ?C); 1 ?C (200 to 300 ?C) |
Thermistor Temperature Accuracy | ? 0.2 ?C (-30.0 to 170.0 ?C); ? 0.4 ?C (-50.0 to -30.0 ?C and 170.0 to 199.9 ?C); ? 1 ?C (200 to 300 ?C) ? 1 digit |
Automatic Shut-Off | power save settings: 1 min, 2 min (default), 8 min, 60 m in. or OFF |
Battery Type/Life | CR2032 3V x 2 pcs. / approx. 4000 hours of use |
Environment | -20.0 to 50.0 ?C (-4.0 to 122.0 ?F) |
Dimensions | 165 x 45 x 24 mm (6.5 x 1.8 x 0.9”) |
Weight | 85 g (3.0 oz) |
Checktemp® 4 Folding Thermometer - HI151-Brown-No
Ergonomic Design with Rubberized Grip
Checktemp® 4 has an ergonomic design that fits comfortably in the hand. The meter uses vulcanized rubber that is available in 6 different colors for a non-slip grip.
Waterproof Durable Casing
The Checktemp thermometer is completely waterproof to IP67 standards. The IP67 standard is for continuous immersion in water up to 1 meter (3′) in depth. The meters will actually float if accidentally dropped into a pot, vat or any other container.
Penetration Probe
The sharp, AISI 316 stainless steel probe is ideal for testing fresh, cooked and semi frozen food. The NTC thermistor is located in the sensing tip and allows for the measurement of food that is 2 cm (0.79″) thick.
Instrument Quality Certificate for Traceability
HI151 is calibrated to five points (-20.0, 0.0, 25.0, 60.0 and 120.0 ℃) and tested at three points using reference meters, the accuracy of which is traceable to NIST in the USA or an internationally acceptable national physical standards. Each meter is serialized and supplied with an instrument quality certificate
CAL-Check
With all thermometers there is drift in the electronics over time. Every time the thermometer is switched ON the LCD will display “CAL” then “-0-”, indicating that the factory calibration has been verified and the thermometer is ready for use.
Wake on Motion Sensor
The meter has an adjustable power save mode that can be disabled. The power save mode can be programmed to turn the display off and conserve power after 1, 2, 8, or 60 minutes. The built-in motion sensor detects when the meter is picked up and automatically turns the display back on.
Checktemp®4 Temperature Tester – HI151
The HI151 Checktemp® 4 is a folding thermistor thermometer that can measure temperature up to 300 ℃ (572 ℉). These thermometers offer many advanced features including CAL-Check for an internal verification of the electronics and a motion sensor which eliminates the need of closing and reopening the probe when the meter enters a power saving mode. The Checktemp 4 is available in six different colors which can be assigned to different products to avoid cross contamination in the restaurant, kitchen or production facility.
- CAL Check to verify meter performance
- Waterproof to IP67 Standards
- Wake on motion
SKU | HI151-5 |
Name | Checktemp® 4 Folding Thermometer – HI151-Brown-No |
Thermistor Temperature Range | -50.0 to 300 ?C / -58.0 to 572 ?F |
Thermistor Temperature Resolution | 0.1 ?C (-50.0 to 199.9 ?C); 1 ?C (200 to 300 ?C) |
Thermistor Temperature Accuracy | ? 0.2 ?C (-30.0 to 170.0 ?C); ? 0.4 ?C (-50.0 to -30.0 ?C and 170.0 to 199.9 ?C); ? 1 ?C (200 to 300 ?C) ? 1 digit |
Automatic Shut-Off | power save settings: 1 min, 2 min (default), 8 min, 60 m in. or OFF |
Battery Type/Life | CR2032 3V x 2 pcs. / approx. 4000 hours of use |
Environment | -20.0 to 50.0 ?C (-4.0 to 122.0 ?F) |
Dimensions | 165 x 45 x 24 mm (6.5 x 1.8 x 0.9”) |
Weight | 85 g (3.0 oz) |
Checktemp® 4 Folding Thermometer - HI151-Green-Yes
Ergonomic Design with Rubberized Grip
Checktemp® 4 has an ergonomic design that fits comfortably in the hand. The meter uses vulcanized rubber that is available in 6 different colors for a non-slip grip.
Waterproof Durable Casing
The Checktemp thermometer is completely waterproof to IP67 standards. The IP67 standard is for continuous immersion in water up to 1 meter (3′) in depth. The meters will actually float if accidentally dropped into a pot, vat or any other container.
Penetration Probe
The sharp, AISI 316 stainless steel probe is ideal for testing fresh, cooked and semi frozen food. The NTC thermistor is located in the sensing tip and allows for the measurement of food that is 2 cm (0.79″) thick.
Instrument Quality Certificate for Traceability
HI151 is calibrated to five points (-20.0, 0.0, 25.0, 60.0 and 120.0 ℃) and tested at three points using reference meters, the accuracy of which is traceable to NIST in the USA or an internationally acceptable national physical standards. Each meter is serialized and supplied with an instrument quality certificate
CAL-Check
With all thermometers there is drift in the electronics over time. Every time the thermometer is switched ON the LCD will display “CAL” then “-0-”, indicating that the factory calibration has been verified and the thermometer is ready for use.
Wake on Motion Sensor
The meter has an adjustable power save mode that can be disabled. The power save mode can be programmed to turn the display off and conserve power after 1, 2, 8, or 60 minutes. The built-in motion sensor detects when the meter is picked up and automatically turns the display back on.
Checktemp®4 Temperature Tester – HI151
The HI151 Checktemp® 4 is a folding thermistor thermometer that can measure temperature up to 300 ℃ (572 ℉). These thermometers offer many advanced features including CAL-Check for an internal verification of the electronics and a motion sensor which eliminates the need of closing and reopening the probe when the meter enters a power saving mode. The Checktemp 4 is available in six different colors which can be assigned to different products to avoid cross contamination in the restaurant, kitchen or production facility.
- CAL Check to verify meter performance
- Waterproof to IP67 Standards
- Wake on motion
SKU | HI151-400 |
Name | Checktemp® 4 Folding Thermometer – HI151-Green-Yes |
Thermistor Temperature Range | -50.0 to 300 ?C / -58.0 to 572 ?F |
Thermistor Temperature Resolution | 0.1 ?C (-50.0 to 199.9 ?C); 1 ?C (200 to 300 ?C) |
Thermistor Temperature Accuracy | ? 0.2 ?C (-30.0 to 170.0 ?C); ? 0.4 ?C (-50.0 to -30.0 ?C and 170.0 to 199.9 ?C); ? 1 ?C (200 to 300 ?C) ? 1 digit |
Automatic Shut-Off | power save settings: 1 min, 2 min (default), 8 min, 60 m in. or OFF |
Battery Type/Life | CR2032 3V x 2 pcs. / approx. 4000 hours of use |
Environment | -20.0 to 50.0 ?C (-4.0 to 122.0 ?F) |
Dimensions | 165 x 45 x 24 mm (6.5 x 1.8 x 0.9”) |
Weight | 85 g (3.0 oz) |
Checktemp® 4 Folding Thermometer - HI151-Green-No
Ergonomic Design with Rubberized Grip
Checktemp® 4 has an ergonomic design that fits comfortably in the hand. The meter uses vulcanized rubber that is available in 6 different colors for a non-slip grip.
Waterproof Durable Casing
The Checktemp thermometer is completely waterproof to IP67 standards. The IP67 standard is for continuous immersion in water up to 1 meter (3′) in depth. The meters will actually float if accidentally dropped into a pot, vat or any other container.
Penetration Probe
The sharp, AISI 316 stainless steel probe is ideal for testing fresh, cooked and semi frozen food. The NTC thermistor is located in the sensing tip and allows for the measurement of food that is 2 cm (0.79″) thick.
Instrument Quality Certificate for Traceability
HI151 is calibrated to five points (-20.0, 0.0, 25.0, 60.0 and 120.0 ℃) and tested at three points using reference meters, the accuracy of which is traceable to NIST in the USA or an internationally acceptable national physical standards. Each meter is serialized and supplied with an instrument quality certificate
CAL-Check
With all thermometers there is drift in the electronics over time. Every time the thermometer is switched ON the LCD will display “CAL” then “-0-”, indicating that the factory calibration has been verified and the thermometer is ready for use.
Wake on Motion Sensor
The meter has an adjustable power save mode that can be disabled. The power save mode can be programmed to turn the display off and conserve power after 1, 2, 8, or 60 minutes. The built-in motion sensor detects when the meter is picked up and automatically turns the display back on.
Checktemp®4 Temperature Tester – HI151
The HI151 Checktemp® 4 is a folding thermistor thermometer that can measure temperature up to 300 ℃ (572 ℉). These thermometers offer many advanced features including CAL-Check for an internal verification of the electronics and a motion sensor which eliminates the need of closing and reopening the probe when the meter enters a power saving mode. The Checktemp 4 is available in six different colors which can be assigned to different products to avoid cross contamination in the restaurant, kitchen or production facility.
- CAL Check to verify meter performance
- Waterproof to IP67 Standards
- Wake on motion
SKU | HI151-4 |
Name | Checktemp® 4 Folding Thermometer – HI151-Green-No |
Thermistor Temperature Range | -50.0 to 300 ?C / -58.0 to 572 ?F |
Thermistor Temperature Resolution | 0.1 ?C (-50.0 to 199.9 ?C); 1 ?C (200 to 300 ?C) |
Thermistor Temperature Accuracy | ? 0.2 ?C (-30.0 to 170.0 ?C); ? 0.4 ?C (-50.0 to -30.0 ?C and 170.0 to 199.9 ?C); ? 1 ?C (200 to 300 ?C) ? 1 digit |
Automatic Shut-Off | power save settings: 1 min, 2 min (default), 8 min, 60 m in. or OFF |
Battery Type/Life | CR2032 3V x 2 pcs. / approx. 4000 hours of use |
Environment | -20.0 to 50.0 ?C (-4.0 to 122.0 ?F) |
Dimensions | 165 x 45 x 24 mm (6.5 x 1.8 x 0.9”) |
Weight | 85 g (3.0 oz) |
Checktemp® 4 Folding Thermometer - HI151-White-Yes
Ergonomic Design with Rubberized Grip
Checktemp® 4 has an ergonomic design that fits comfortably in the hand. The meter uses vulcanized rubber that is available in 6 different colors for a non-slip grip.
Waterproof Durable Casing
The Checktemp thermometer is completely waterproof to IP67 standards. The IP67 standard is for continuous immersion in water up to 1 meter (3′) in depth. The meters will actually float if accidentally dropped into a pot, vat or any other container.
Penetration Probe
The sharp, AISI 316 stainless steel probe is ideal for testing fresh, cooked and semi frozen food. The NTC thermistor is located in the sensing tip and allows for the measurement of food that is 2 cm (0.79″) thick.
Instrument Quality Certificate for Traceability
HI151 is calibrated to five points (-20.0, 0.0, 25.0, 60.0 and 120.0 ℃) and tested at three points using reference meters, the accuracy of which is traceable to NIST in the USA or an internationally acceptable national physical standards. Each meter is serialized and supplied with an instrument quality certificate
CAL-Check
With all thermometers there is drift in the electronics over time. Every time the thermometer is switched ON the LCD will display “CAL” then “-0-”, indicating that the factory calibration has been verified and the thermometer is ready for use.
Wake on Motion Sensor
The meter has an adjustable power save mode that can be disabled. The power save mode can be programmed to turn the display off and conserve power after 1, 2, 8, or 60 minutes. The built-in motion sensor detects when the meter is picked up and automatically turns the display back on.
Checktemp®4 Temperature Tester – HI151
The HI151 Checktemp® 4 is a folding thermistor thermometer that can measure temperature up to 300 ℃ (572 ℉). These thermometers offer many advanced features including CAL-Check for an internal verification of the electronics and a motion sensor which eliminates the need of closing and reopening the probe when the meter enters a power saving mode. The Checktemp 4 is available in six different colors which can be assigned to different products to avoid cross contamination in the restaurant, kitchen or production facility.
- CAL Check to verify meter performance
- Waterproof to IP67 Standards
- Wake on motion
SKU | HI151-000 |
Name | Checktemp® 4 Folding Thermometer – HI151-White-Yes |
Thermistor Temperature Range | -50.0 to 300 ?C / -58.0 to 572 ?F |
Thermistor Temperature Resolution | 0.1 ?C (-50.0 to 199.9 ?C); 1 ?C (200 to 300 ?C) |
Thermistor Temperature Accuracy | ? 0.2 ?C (-30.0 to 170.0 ?C); ? 0.4 ?C (-50.0 to -30.0 ?C and 170.0 to 199.9 ?C); ? 1 ?C (200 to 300 ?C) ? 1 digit |
Automatic Shut-Off | power save settings: 1 min, 2 min (default), 8 min, 60 m in. or OFF |
Battery Type/Life | CR2032 3V x 2 pcs. / approx. 4000 hours of use |
Environment | -20.0 to 50.0 ?C (-4.0 to 122.0 ?F) |
Dimensions | 165 x 45 x 24 mm (6.5 x 1.8 x 0.9”) |
Weight | 85 g (3.0 oz) |
Checktemp® 4 Folding Thermometer - HI151-Yellow-Yes
Ergonomic Design with Rubberized Grip
Checktemp® 4 has an ergonomic design that fits comfortably in the hand. The meter uses vulcanized rubber that is available in 6 different colors for a non-slip grip.
Waterproof Durable Casing
The Checktemp thermometer is completely waterproof to IP67 standards. The IP67 standard is for continuous immersion in water up to 1 meter (3′) in depth. The meters will actually float if accidentally dropped into a pot, vat or any other container.
Penetration Probe
The sharp, AISI 316 stainless steel probe is ideal for testing fresh, cooked and semi frozen food. The NTC thermistor is located in the sensing tip and allows for the measurement of food that is 2 cm (0.79″) thick.
Instrument Quality Certificate for Traceability
HI151 is calibrated to five points (-20.0, 0.0, 25.0, 60.0 and 120.0 ℃) and tested at three points using reference meters, the accuracy of which is traceable to NIST in the USA or an internationally acceptable national physical standards. Each meter is serialized and supplied with an instrument quality certificate
CAL-Check
With all thermometers there is drift in the electronics over time. Every time the thermometer is switched ON the LCD will display “CAL” then “-0-”, indicating that the factory calibration has been verified and the thermometer is ready for use.
Wake on Motion Sensor
The meter has an adjustable power save mode that can be disabled. The power save mode can be programmed to turn the display off and conserve power after 1, 2, 8, or 60 minutes. The built-in motion sensor detects when the meter is picked up and automatically turns the display back on.
Checktemp®4 Temperature Tester – HI151
The HI151 Checktemp® 4 is a folding thermistor thermometer that can measure temperature up to 300 ℃ (572 ℉). These thermometers offer many advanced features including CAL-Check for an internal verification of the electronics and a motion sensor which eliminates the need of closing and reopening the probe when the meter enters a power saving mode. The Checktemp 4 is available in six different colors which can be assigned to different products to avoid cross contamination in the restaurant, kitchen or production facility.
- CAL Check to verify meter performance
- Waterproof to IP67 Standards
- Wake on motion
SKU | HI151-300 |
Name | Checktemp® 4 Folding Thermometer – HI151-Yellow-Yes |
Thermistor Temperature Range | -50.0 to 300 ?C / -58.0 to 572 ?F |
Thermistor Temperature Resolution | 0.1 ?C (-50.0 to 199.9 ?C); 1 ?C (200 to 300 ?C) |
Thermistor Temperature Accuracy | ? 0.2 ?C (-30.0 to 170.0 ?C); ? 0.4 ?C (-50.0 to -30.0 ?C and 170.0 to 199.9 ?C); ? 1 ?C (200 to 300 ?C) ? 1 digit |
Automatic Shut-Off | power save settings: 1 min, 2 min (default), 8 min, 60 m in. or OFF |
Battery Type/Life | CR2032 3V x 2 pcs. / approx. 4000 hours of use |
Environment | -20.0 to 50.0 ?C (-4.0 to 122.0 ?F) |
Dimensions | 165 x 45 x 24 mm (6.5 x 1.8 x 0.9”) |
Weight | 85 g (3.0 oz) |
Checktemp® 4 Folding Thermometer - HI151-Yellow-No
Ergonomic Design with Rubberized Grip
Checktemp® 4 has an ergonomic design that fits comfortably in the hand. The meter uses vulcanized rubber that is available in 6 different colors for a non-slip grip.
Waterproof Durable Casing
The Checktemp thermometer is completely waterproof to IP67 standards. The IP67 standard is for continuous immersion in water up to 1 meter (3′) in depth. The meters will actually float if accidentally dropped into a pot, vat or any other container.
Penetration Probe
The sharp, AISI 316 stainless steel probe is ideal for testing fresh, cooked and semi frozen food. The NTC thermistor is located in the sensing tip and allows for the measurement of food that is 2 cm (0.79″) thick.
Instrument Quality Certificate for Traceability
HI151 is calibrated to five points (-20.0, 0.0, 25.0, 60.0 and 120.0 ℃) and tested at three points using reference meters, the accuracy of which is traceable to NIST in the USA or an internationally acceptable national physical standards. Each meter is serialized and supplied with an instrument quality certificate
CAL-Check
With all thermometers there is drift in the electronics over time. Every time the thermometer is switched ON the LCD will display “CAL” then “-0-”, indicating that the factory calibration has been verified and the thermometer is ready for use.
Wake on Motion Sensor
The meter has an adjustable power save mode that can be disabled. The power save mode can be programmed to turn the display off and conserve power after 1, 2, 8, or 60 minutes. The built-in motion sensor detects when the meter is picked up and automatically turns the display back on.
Checktemp®4 Temperature Tester – HI151
The HI151 Checktemp® 4 is a folding thermistor thermometer that can measure temperature up to 300 ℃ (572 ℉). These thermometers offer many advanced features including CAL-Check for an internal verification of the electronics and a motion sensor which eliminates the need of closing and reopening the probe when the meter enters a power saving mode. The Checktemp 4 is available in six different colors which can be assigned to different products to avoid cross contamination in the restaurant, kitchen or production facility.
- CAL Check to verify meter performance
- Waterproof to IP67 Standards
- Wake on motion
SKU | HI151-3 |
Name | Checktemp® 4 Folding Thermometer – HI151-Yellow-No |
Thermistor Temperature Range | -50.0 to 300 ?C / -58.0 to 572 ?F |
Thermistor Temperature Resolution | 0.1 ?C (-50.0 to 199.9 ?C); 1 ?C (200 to 300 ?C) |
Thermistor Temperature Accuracy | ? 0.2 ?C (-30.0 to 170.0 ?C); ? 0.4 ?C (-50.0 to -30.0 ?C and 170.0 to 199.9 ?C); ? 1 ?C (200 to 300 ?C) ? 1 digit |
Automatic Shut-Off | power save settings: 1 min, 2 min (default), 8 min, 60 m in. or OFF |
Battery Type/Life | CR2032 3V x 2 pcs. / approx. 4000 hours of use |
Environment | -20.0 to 50.0 ?C (-4.0 to 122.0 ?F) |
Dimensions | 165 x 45 x 24 mm (6.5 x 1.8 x 0.9”) |
Weight | 85 g (3.0 oz) |
Checktemp® 4 Folding Thermometer - HI151-Blue-Yes
Ergonomic Design with Rubberized Grip
Checktemp® 4 has an ergonomic design that fits comfortably in the hand. The meter uses vulcanized rubber that is available in 6 different colors for a non-slip grip.
Waterproof Durable Casing
The Checktemp thermometer is completely waterproof to IP67 standards. The IP67 standard is for continuous immersion in water up to 1 meter (3′) in depth. The meters will actually float if accidentally dropped into a pot, vat or any other container.
Penetration Probe
The sharp, AISI 316 stainless steel probe is ideal for testing fresh, cooked and semi frozen food. The NTC thermistor is located in the sensing tip and allows for the measurement of food that is 2 cm (0.79″) thick.
Instrument Quality Certificate for Traceability
HI151 is calibrated to five points (-20.0, 0.0, 25.0, 60.0 and 120.0 ℃) and tested at three points using reference meters, the accuracy of which is traceable to NIST in the USA or an internationally acceptable national physical standards. Each meter is serialized and supplied with an instrument quality certificate
CAL-Check
With all thermometers there is drift in the electronics over time. Every time the thermometer is switched ON the LCD will display “CAL” then “-0-”, indicating that the factory calibration has been verified and the thermometer is ready for use.
Wake on Motion Sensor
The meter has an adjustable power save mode that can be disabled. The power save mode can be programmed to turn the display off and conserve power after 1, 2, 8, or 60 minutes. The built-in motion sensor detects when the meter is picked up and automatically turns the display back on.
Checktemp®4 Temperature Tester – HI151
The HI151 Checktemp® 4 is a folding thermistor thermometer that can measure temperature up to 300 ℃ (572 ℉). These thermometers offer many advanced features including CAL-Check for an internal verification of the electronics and a motion sensor which eliminates the need of closing and reopening the probe when the meter enters a power saving mode. The Checktemp 4 is available in six different colors which can be assigned to different products to avoid cross contamination in the restaurant, kitchen or production facility.
- CAL Check to verify meter performance
- Waterproof to IP67 Standards
- Wake on motion
SKU | HI151-200 |
Name | Checktemp® 4 Folding Thermometer – HI151-Blue-Yes |
Thermistor Temperature Range | -50.0 to 300 ?C / -58.0 to 572 ?F |
Thermistor Temperature Resolution | 0.1 ?C (-50.0 to 199.9 ?C); 1 ?C (200 to 300 ?C) |
Thermistor Temperature Accuracy | ? 0.2 ?C (-30.0 to 170.0 ?C); ? 0.4 ?C (-50.0 to -30.0 ?C and 170.0 to 199.9 ?C); ? 1 ?C (200 to 300 ?C) ? 1 digit |
Automatic Shut-Off | power save settings: 1 min, 2 min (default), 8 min, 60 m in. or OFF |
Battery Type/Life | CR2032 3V x 2 pcs. / approx. 4000 hours of use |
Environment | -20.0 to 50.0 ?C (-4.0 to 122.0 ?F) |
Dimensions | 165 x 45 x 24 mm (6.5 x 1.8 x 0.9”) |
Weight | 85 g (3.0 oz) |
Checktemp® 4 Folding Thermometer - HI151-Red-No
Ergonomic Design with Rubberized Grip
Checktemp® 4 has an ergonomic design that fits comfortably in the hand. The meter uses vulcanized rubber that is available in 6 different colors for a non-slip grip.
Waterproof Durable Casing
The Checktemp thermometer is completely waterproof to IP67 standards. The IP67 standard is for continuous immersion in water up to 1 meter (3′) in depth. The meters will actually float if accidentally dropped into a pot, vat or any other container.
Penetration Probe
The sharp, AISI 316 stainless steel probe is ideal for testing fresh, cooked and semi frozen food. The NTC thermistor is located in the sensing tip and allows for the measurement of food that is 2 cm (0.79″) thick.
Instrument Quality Certificate for Traceability
HI151 is calibrated to five points (-20.0, 0.0, 25.0, 60.0 and 120.0 ℃) and tested at three points using reference meters, the accuracy of which is traceable to NIST in the USA or an internationally acceptable national physical standards. Each meter is serialized and supplied with an instrument quality certificate
CAL-Check
With all thermometers there is drift in the electronics over time. Every time the thermometer is switched ON the LCD will display “CAL” then “-0-”, indicating that the factory calibration has been verified and the thermometer is ready for use.
Wake on Motion Sensor
The meter has an adjustable power save mode that can be disabled. The power save mode can be programmed to turn the display off and conserve power after 1, 2, 8, or 60 minutes. The built-in motion sensor detects when the meter is picked up and automatically turns the display back on.
Checktemp®4 Temperature Tester – HI151
The HI151 Checktemp® 4 is a folding thermistor thermometer that can measure temperature up to 300 ℃ (572 ℉). These thermometers offer many advanced features including CAL-Check for an internal verification of the electronics and a motion sensor which eliminates the need of closing and reopening the probe when the meter enters a power saving mode. The Checktemp 4 is available in six different colors which can be assigned to different products to avoid cross contamination in the restaurant, kitchen or production facility.
- CAL Check to verify meter performance
- Waterproof to IP67 Standards
- Wake on motion
SKU | HI151-1 |
Name | Checktemp® 4 Folding Thermometer – HI151-Red-No |
Thermistor Temperature Range | -50.0 to 300 ?C / -58.0 to 572 ?F |
Thermistor Temperature Resolution | 0.1 ?C (-50.0 to 199.9 ?C); 1 ?C (200 to 300 ?C) |
Thermistor Temperature Accuracy | ? 0.2 ?C (-30.0 to 170.0 ?C); ? 0.4 ?C (-50.0 to -30.0 ?C and 170.0 to 199.9 ?C); ? 1 ?C (200 to 300 ?C) ? 1 digit |
Automatic Shut-Off | power save settings: 1 min, 2 min (default), 8 min, 60 m in. or OFF |
Battery Type/Life | CR2032 3V x 2 pcs. / approx. 4000 hours of use |
Environment | -20.0 to 50.0 ?C (-4.0 to 122.0 ?F) |
Dimensions | 165 x 45 x 24 mm (6.5 x 1.8 x 0.9”) |
Weight | 85 g (3.0 oz) |
Checktemp® 4 Folding Thermometer - HI151-Red-Yes
Ergonomic Design with Rubberized Grip
Checktemp® 4 has an ergonomic design that fits comfortably in the hand. The meter uses vulcanized rubber that is available in 6 different colors for a non-slip grip.
Waterproof Durable Casing
The Checktemp thermometer is completely waterproof to IP67 standards. The IP67 standard is for continuous immersion in water up to 1 meter (3′) in depth. The meters will actually float if accidentally dropped into a pot, vat or any other container.
Penetration Probe
The sharp, AISI 316 stainless steel probe is ideal for testing fresh, cooked and semi frozen food. The NTC thermistor is located in the sensing tip and allows for the measurement of food that is 2 cm (0.79″) thick.
Instrument Quality Certificate for Traceability
HI151 is calibrated to five points (-20.0, 0.0, 25.0, 60.0 and 120.0 ℃) and tested at three points using reference meters, the accuracy of which is traceable to NIST in the USA or an internationally acceptable national physical standards. Each meter is serialized and supplied with an instrument quality certificate
CAL-Check
With all thermometers there is drift in the electronics over time. Every time the thermometer is switched ON the LCD will display “CAL” then “-0-”, indicating that the factory calibration has been verified and the thermometer is ready for use.
Wake on Motion Sensor
The meter has an adjustable power save mode that can be disabled. The power save mode can be programmed to turn the display off and conserve power after 1, 2, 8, or 60 minutes. The built-in motion sensor detects when the meter is picked up and automatically turns the display back on.
Checktemp®4 Temperature Tester – HI151
The HI151 Checktemp® 4 is a folding thermistor thermometer that can measure temperature up to 300 ℃ (572 ℉). These thermometers offer many advanced features including CAL-Check for an internal verification of the electronics and a motion sensor which eliminates the need of closing and reopening the probe when the meter enters a power saving mode. The Checktemp 4 is available in six different colors which can be assigned to different products to avoid cross contamination in the restaurant, kitchen or production facility.
- CAL Check to verify meter performance
- Waterproof to IP67 Standards
- Wake on motion
SKU | HI151-100 |
Name | Checktemp® 4 Folding Thermometer – HI151-Red-Yes |
Thermistor Temperature Range | -50.0 to 300 ?C / -58.0 to 572 ?F |
Thermistor Temperature Resolution | 0.1 ?C (-50.0 to 199.9 ?C); 1 ?C (200 to 300 ?C) |
Thermistor Temperature Accuracy | ? 0.2 ?C (-30.0 to 170.0 ?C); ? 0.4 ?C (-50.0 to -30.0 ?C and 170.0 to 199.9 ?C); ? 1 ?C (200 to 300 ?C) ? 1 digit |
Automatic Shut-Off | power save settings: 1 min, 2 min (default), 8 min, 60 m in. or OFF |
Battery Type/Life | CR2032 3V x 2 pcs. / approx. 4000 hours of use |
Environment | -20.0 to 50.0 ?C (-4.0 to 122.0 ?F) |
Dimensions | 165 x 45 x 24 mm (6.5 x 1.8 x 0.9”) |
Weight | 85 g (3.0 oz) |
Checktemp® 4 Folding Thermometer - HI151-Blue-No
Ergonomic Design with Rubberized Grip
Checktemp® 4 has an ergonomic design that fits comfortably in the hand. The meter uses vulcanized rubber that is available in 6 different colors for a non-slip grip.
Waterproof Durable Casing
The Checktemp thermometer is completely waterproof to IP67 standards. The IP67 standard is for continuous immersion in water up to 1 meter (3′) in depth. The meters will actually float if accidentally dropped into a pot, vat or any other container.
Penetration Probe
The sharp, AISI 316 stainless steel probe is ideal for testing fresh, cooked and semi frozen food. The NTC thermistor is located in the sensing tip and allows for the measurement of food that is 2 cm (0.79″) thick.
Instrument Quality Certificate for Traceability
HI151 is calibrated to five points (-20.0, 0.0, 25.0, 60.0 and 120.0 ℃) and tested at three points using reference meters, the accuracy of which is traceable to NIST in the USA or an internationally acceptable national physical standards. Each meter is serialized and supplied with an instrument quality certificate
CAL-Check
With all thermometers there is drift in the electronics over time. Every time the thermometer is switched ON the LCD will display “CAL” then “-0-”, indicating that the factory calibration has been verified and the thermometer is ready for use.
Wake on Motion Sensor
The meter has an adjustable power save mode that can be disabled. The power save mode can be programmed to turn the display off and conserve power after 1, 2, 8, or 60 minutes. The built-in motion sensor detects when the meter is picked up and automatically turns the display back on.
Checktemp®4 Temperature Tester – HI151
The HI151 Checktemp® 4 is a folding thermistor thermometer that can measure temperature up to 300 ℃ (572 ℉). These thermometers offer many advanced features including CAL-Check for an internal verification of the electronics and a motion sensor which eliminates the need of closing and reopening the probe when the meter enters a power saving mode. The Checktemp 4 is available in six different colors which can be assigned to different products to avoid cross contamination in the restaurant, kitchen or production facility.
- CAL Check to verify meter performance
- Waterproof to IP67 Standards
- Wake on motion
SKU | HI151-2 |
Name | Checktemp® 4 Folding Thermometer – HI151-Blue-No |
Thermistor Temperature Range | -50.0 to 300 ?C / -58.0 to 572 ?F |
Thermistor Temperature Resolution | 0.1 ?C (-50.0 to 199.9 ?C); 1 ?C (200 to 300 ?C) |
Thermistor Temperature Accuracy | ? 0.2 ?C (-30.0 to 170.0 ?C); ? 0.4 ?C (-50.0 to -30.0 ?C and 170.0 to 199.9 ?C); ? 1 ?C (200 to 300 ?C) ? 1 digit |
Automatic Shut-Off | power save settings: 1 min, 2 min (default), 8 min, 60 m in. or OFF |
Battery Type/Life | CR2032 3V x 2 pcs. / approx. 4000 hours of use |
Environment | -20.0 to 50.0 ?C (-4.0 to 122.0 ?F) |
Dimensions | 165 x 45 x 24 mm (6.5 x 1.8 x 0.9”) |
Weight | 85 g (3.0 oz) |
Checktemp® 4 Folding Thermometer - HI151-White-No
Ergonomic Design with Rubberized Grip
Checktemp® 4 has an ergonomic design that fits comfortably in the hand. The meter uses vulcanized rubber that is available in 6 different colors for a non-slip grip.
Waterproof Durable Casing
The Checktemp thermometer is completely waterproof to IP67 standards. The IP67 standard is for continuous immersion in water up to 1 meter (3′) in depth. The meters will actually float if accidentally dropped into a pot, vat or any other container.
Penetration Probe
The sharp, AISI 316 stainless steel probe is ideal for testing fresh, cooked and semi frozen food. The NTC thermistor is located in the sensing tip and allows for the measurement of food that is 2 cm (0.79″) thick.
Instrument Quality Certificate for Traceability
HI151 is calibrated to five points (-20.0, 0.0, 25.0, 60.0 and 120.0 ℃) and tested at three points using reference meters, the accuracy of which is traceable to NIST in the USA or an internationally acceptable national physical standards. Each meter is serialized and supplied with an instrument quality certificate
CAL-Check
With all thermometers there is drift in the electronics over time. Every time the thermometer is switched ON the LCD will display “CAL” then “-0-”, indicating that the factory calibration has been verified and the thermometer is ready for use.
Wake on Motion Sensor
The meter has an adjustable power save mode that can be disabled. The power save mode can be programmed to turn the display off and conserve power after 1, 2, 8, or 60 minutes. The built-in motion sensor detects when the meter is picked up and automatically turns the display back on.
Checktemp®4 Temperature Tester – HI151
The HI151 Checktemp® 4 is a folding thermistor thermometer that can measure temperature up to 300 ℃ (572 ℉). These thermometers offer many advanced features including CAL-Check for an internal verification of the electronics and a motion sensor which eliminates the need of closing and reopening the probe when the meter enters a power saving mode. The Checktemp 4 is available in six different colors which can be assigned to different products to avoid cross contamination in the restaurant, kitchen or production facility.
- CAL Check to verify meter performance
- Waterproof to IP67 Standards
- Wake on motion
SKU | HI151 |
Name | Checktemp® 4 Folding Thermometer – HI151-White-No |
Thermistor Temperature Range | -50.0 to 300 ?C / -58.0 to 572 ?F |
Thermistor Temperature Resolution | 0.1 ?C (-50.0 to 199.9 ?C); 1 ?C (200 to 300 ?C) |
Thermistor Temperature Accuracy | ? 0.2 ?C (-30.0 to 170.0 ?C); ? 0.4 ?C (-50.0 to -30.0 ?C and 170.0 to 199.9 ?C); ? 1 ?C (200 to 300 ?C) ? 1 digit |
Automatic Shut-Off | power save settings: 1 min, 2 min (default), 8 min, 60 m in. or OFF |
Battery Type/Life | CR2032 3V x 2 pcs. / approx. 4000 hours of use |
Environment | -20.0 to 50.0 ?C (-4.0 to 122.0 ?F) |
Dimensions | 165 x 45 x 24 mm (6.5 x 1.8 x 0.9”) |
Weight | 85 g (3.0 oz) |
Checkfridge™ Remote Sensor Thermometer - HI147
The HI147 is a remote temperature ideal for monitoring in food care environments.
It contains magnets for easy placement on a metal surface and delivers high accuracy measurements over a wide temperature range. The thermometer’s unique CAL Check™ feature allows for an internal calibration of the device with the flick of a switch, thereby alleviating the time preparing an ice bath.
CAL Check™ – The thermometer’s unique CAL Check™ feature allows for an internal calibration of the device with the flick of a switch, thereby alleviating the time preparing an ice bath.
Magnetized – Two magnets located on the back of the device all for easy placement on the outside of a refrigerator or metal cabinet.
Food Compatible Cable – The thermometer is specially designed with a food compatible cable for continuous monitoring of temperature in food care environments.
The HI147 is a remote temperature sensor ideal for monitoring in food care environments. It contains magnets for easy placement on a metal surface and delivers high accuracy measurements over a wide temperature range.
- CAL Check™
- Magnetized
- Clear Display
SKU | HI147-web |
Name | Checkfridge™ Remote Sensor Thermometer – HI147 |
Temperature Range | HI147-00 -50.0 to 150.0?C |
Temperature Resolution | HI147-00 0.1?C |
Temperature Accuracy | HI147-00 ?0.3?C (-20 to 90?C); ?0.5?C (outside) |
Battery Type/Life | 1.5V AAA / approximately 3 years of continuous use |
Environment | 0 to 50?C (32 to 122?F); RH max 95% |
Dimensions | 93 x 39 x 31 mm (3.7 x 1.5 x 1.2”) |
Weight | 60 g (2.1 oz.) |
T-Shaped Fahrenheit Thermometer (300mm) - HI145-30
HI145 thermometers were developed for HACCP programs that require high standards of performance with simplicity of use. The durable T-shaped handle fits comfortably in hand and is ideal for applications where applied force is necessary for insertion, such as with incoming meat inspection and semi-frozen foods. The LCD positioned on top of the meter allows for easy reading in cooking applications.
CAL Check™ – When the HI145 is turned on, a calibration test is immediately performed. With this unique feature, the HI145 series performs a self-check of its calibration status and displays it on the LCD, ensuring accuracy, repeatability, and condence in readings.
HACCP Compliant – The HI145 is in compliance with food regulations, making it an ideal instrument for use as a tool for control in HACCP analysis.
AISI 316 Stainless Steel Probe – The HI145 thermometer is equipped with a 300 mm (12″) long AISI 316 stainless steel probe, ideal for monitoring hot liquids, such as in deep frying and soup preparation.
Enhanced Battery Life– The HI145 uses AAA batteries and offers an exceptional 10, 000 hours of continuous use.
Auto Shut-off– The battery life of the thermometer is preserved by this feature which automatically turns the meter off after 8 minutes of non-use.
he HI145 is a T-shaped digital thermometer with stainless steel penetration probe developed for HACCP programs. It offers an ergonomic design and delivers high accuracy measurements over a wide temperature range.
- CAL Check™
- AISI 316 stainless steel probe
- HACCP compliant
SKU | HI145-30 |
Name | T-Shaped Fahrenheit Thermometer (300mm) – HI145-30 |
Temperature Range | -58.0 to 428?F |
Temperature Resolution | 0.1?F (-58.0 to 199.9?F); 1?F (200 to 428?F) |
Temperature Accuracy | ?0.6?F (-4 to 194?F); ?0.4% F.S. (outside) |
Automatic Shut-Off | after 8 minutes of non-use |
Battery Type/Life | 1.5V AAA / approximately 10,000 hours of continuous use |
Environment | -10 to 50?C (14 to 122?F); RH max 95% |
Dimensions | 92 x 340 x 38 mm (3.6 x 13.4 x 1.5”) |
Weight | 80 g (2.8 oz.) |
T-Shaped Celsius Thermometer (300mm) - HI145-20
HI145 thermometers were developed for HACCP programs that require high standards of performance with simplicity of use. The durable T-shaped handle fits comfortably in hand and is ideal for applications where applied force is necessary for insertion, such as with incoming meat inspection and semi-frozen foods. The LCD positioned on top of the meter allows for easy reading in cooking applications.
CAL Check™ – When the HI145 is turned on, a calibration test is immediately performed. With this unique feature, the HI145 series performs a self-check of its calibration status and displays it on the LCD, ensuring accuracy, repeatability, and condence in readings.
HACCP Compliant – The HI145 is in compliance with food regulations, making it an ideal instrument for use as a tool for control in HACCP analysis.
AISI 316 Stainless Steel Probe – The HI145 thermometer is equipped with a 300 mm (12″) long AISI 316 stainless steel probe, ideal for monitoring hot liquids, such as in deep frying and soup preparation.
Enhanced Battery Life– The HI145 uses AAA batteries and offers an exceptional 10, 000 hours of continuous use.
Auto Shut-off– The battery life of the thermometer is preserved by this feature which automatically turns the meter off after 8 minutes of non-use.
The HI145 is a T-shaped digital thermometer with stainless steel penetration probe developed for HACCP programs. It offers an ergonomic design and delivers high accuracy measurements over a wide temperature range.
- CAL Check™
- AISI 316 stainless steel probe
- HACCP compliant
SKU | HI145-20 |
Name | T-Shaped Celsius Thermometer (300mm) – HI145-20 |
Temperature Range | -50.0 to 220?C |
Temperature Resolution | 0.1?C (-50.0 to 199.9?C); 1?C (200 to 220?C) |
Temperature Accuracy | ?0.3?C (-20 to 90?C); ?0.4% F.S. (outside) |
Automatic Shut-Off | after 8 minutes of non-use |
Battery Type/Life | 1.5V AAA / approximately 10,000 hours of continuous use |
Environment | -10 to 50?C (14 to 122?F); RH max 95% |
Dimensions | 92 x 340 x 38 mm (3.6 x 13.4 x 1.5”) |
Weight | 80 g (2.8 oz.) |
T-Shaped Fahrenheit Thermometer (125mm) - HI145-01
HI145 thermometers were developed for HACCP programs that require high standards of performance with simplicity of use. The durable T-shaped handle fits comfortably in hand and is ideal for applications where applied force is necessary for insertion, such as with incoming meat inspection and semi-frozen foods. The LCD positioned on top of the meter allows for easy reading in cooking applications.
CAL Check™ – When the HI145 is turned on, a calibration test is immediately performed. With this unique feature, the HI145 series performs a self-check of its calibration status and displays it on the LCD, ensuring accuracy, repeatability, and condence in readings.
HACCP Compliant – The HI145 is in compliance with food regulations, making it an ideal instrument for use as a tool for control in HACCP analysis.
AISI 316 Stainless Steel Probe – The HI145 thermometer is equipped with a 125 mm (5″) long AISI 316 stainless steel probe. The sharp conical tip provides fast response and improved accuracy over the entire range.
Enhanced Battery Life– The HI145 uses AAA batteries and offers an exceptional 10, 000 hours of continuous use.
Auto Shut-off– The battery life of the thermometer is preserved by this feature which automatically turns the meter off after 8 minutes of non-use.
The HI145 is a T-shaped digital thermometer with stainless steel penetration probe developed for HACCP programs. It offers an ergonomic design and delivers high accuracy measurements over a wide temperature range.
- CAL Check™
- AISI 316 stainless steel probe
- HACCP compliant
SKU | HI145-01 |
Name | T-Shaped Fahrenheit Thermometer (125mm) – HI145-01 |
Temperature Range | -58.0 to 428?F |
Temperature Resolution | 0.1?F (-58.0 to 199.9?F); 1?F (200 to 428?F) |
Temperature Accuracy | ?0.6?F (-4 to 194?F); ?0.4% F.S. (outside) |
Automatic Shut-Off | after 8 minutes of non-use |
Battery Type/Life | 1.5V AAA / approximately 10,000 hours of continuous use |
Environment | -10 to 50?C (14 to 122?F); RH max 95% |
Dimensions | 92 x 165 x 38 mm (3.6 x 6.5 x 1.5”) |
Weight | 65 g (2.3 oz) |
T-Shaped Celsius Thermometer (125mm) - HI145-00
HI145 thermometers were developed for HACCP programs that require high standards of performance with simplicity of use. The durable T-shaped handle fits comfortably in hand and is ideal for applications where applied force is necessary for insertion, such as with incoming meat inspection and semi-frozen foods. The LCD positioned on top of the meter allows for easy reading in cooking applications.
CAL Check™ – When the HI145 is turned on, a calibration test is immediately performed. With this unique feature, the HI145 series performs a self-check of its calibration status and displays it on the LCD, ensuring accuracy, repeatability, and condence in readings.
HACCP Compliant – The HI145 is in compliance with food regulations, making it an ideal instrument for use as a tool for control in HACCP analysis.
AISI 316 Stainless Steel Probe – The HI145 thermometer is equipped with a 125 mm (5″) long AISI 316 stainless steel probe. The sharp conical tip provides fast response and improved accuracy over the entire range.
Enhanced Battery Life– The HI145 uses AAA batteries and offers an exceptional 10, 000 hours of continuous use.
Auto Shut-off– The battery life of the thermometer is preserved by this feature which automatically turns the meter off after 8 minutes of non-use.
The HI145 is a T-shaped digital thermometer with stainless steel penetration probe developed for HACCP programs. It offers an ergonomic design and delivers high accuracy measurements over a wide temperature range.
- CAL Check™
- AISI 316 stainless steel probe
- HACCP compliant
SKU | HI145-00 |
Name | T-Shaped Celsius Thermometer (125mm) – HI145-00 |
Temperature Range | -50.0 to 220?C |
Temperature Resolution | 0.1?C (-50.0 to 199.9?C); 1?C (200 to 220?C) |
Temperature Accuracy | ?0.3?C (-20 to 90?C); ?0.4% F.S. (outside) |
Automatic Shut-Off | after 8 minutes of non-use |
Battery Type/Life | 1.5V AAA / approximately 10,000 hours of continuous use |
Environment | -10 to 50?C (14 to 122?F); RH max 95% |
Dimensions | 92 x 165 x 38 mm (3.6 x 6.5 x 1.5”) |
Weight | 65 g (2.3 oz) |
GroLine® Nutrient Tester EC/TDS - HI98330
Ideal for hydroponics and agriculture applications, the HI98330 GroLine® Nutrient Tester accurately measures the electrical conductivity (EC) in mS/cm and the total dissolved solids (TDS) conversion in parts per million (ppm) of the nutrients in water.
Suitable for plants that need a higher EC, the tester features an extended range up to 6.0 mS/ cm (EC), 3000 ppm (500 ppm scale), and 4200 ppm (700 ppm scale).
The IP67 waterproof rated and floating casing houses the EC graphite electrodes and temperature sensor, and is suitable for stirring and testing simultaneously.
- IP67 waterproof and floating design
- No user calibration needed
- Auto-on when placed in liquid
- Auto-off 30 seconds after stable measurement
- Rugged and doubles as a stirring stick Low battery indicator
- Readings displayed by 24 brightly lit LED lights
- Conductivity scales and operational instructions printed on the tester body
- Easy to clean (detachable crown-shaped cap)
Agriculture, hydroponics, irrigation water
HI98330 is supplied with quick reference guide with instrument quality certificate.
SKU | HI98330 |
Name | GroLine® Nutrient Tester EC/TDS – HI98330 |
EC Range | 0.2 to 6.0 mS/cm |
EC Resolution | 0.1 mS/cm (0.2 to 4.0 mS/cm) |
EC Resolution | 0.25 mS/cm (4.0 to 6.0 mS/cm) |
EC Accuracy | ?4 % of reading ?1 resolution point |
TDS Range | 100 to 3000 ppm (500 ppm scale) |
TDS Range | 140 to 4200 ppm (700 ppm scale) |
Resolution | 50 ppm (100 to 2000 ppm) |
Resolution | 125 ppm (2000 to 3000 ppm) |
Resolution | 70 ppm (140 to 2800 ppm) |
Resolution | 175 ppm (2800 to 4200 ppm) |
Accuracy | ?4 % of reading ?1 resolution point |
Calibration | Factory calibrated |
Probe | Graphite sensors in ABC + PC body |
Temperature Compensation | Automatic from 5.0 to 50.0 ?C (41.0 to 122.0 ?F) |
Battery type | 3?1.5V AA alkaline |
Battery life | Approx. 3 years (10 measurements/day) |
Measurement display | 24 blue LEDs |
Environment | 0 to 50 ?C (32.0 to 122.0 ?F) |
Dimensions | 444 mm (17.48 in.) |
Dimensions | ? 30 mm (1.18 in.) |
Weight with batteries | 265 g (9.3 oz.) |
Casing protection | IP67, ?oating |
