SavantAA Zeeman enduro
The SavantAA Zeeman enduro sets new standards in high performance Zeeman graphite furnace analysis
- Unique Variable Magnetic Field Strength between 0.6 and 1.1 Tesla in 0.1 Tesla increments for maximum precision and sensitivity.
- Eight-lamp auto turret with auto lamp align for rapid element selection and accurate lamp optimization.
- Automatic wavelength and choice of 20 slit widths between 0.1 and 2.0 nm in 0.1 nm increments in both normal and reduced height for ease of operation.
- Coded Lamp Recognition for both normal hollow cathode lamps and Super Lamps.
- New 10 Volt Super Lamp capability, fitted standard for one lamp ensures highest sensitivity with low power consumption and low heat output.
(Optional four lamp supply available.) - New Improved design which allows>1400 firings per tube and lower %RSD.
- Electronic Sample Viewing standard.
- This is a GBC AAS Equipment.
SavantAA AAS
A true double-beam spectrometer. The SavantAA can be configured to exactly meet your analytical and budgetary requirements. The basic instrument includes advanced features such as programmable gasbox, 8 lamp turret with auto alignment of lamps, optimization of wavelength and slit width and setting of the lamp current. The instrument building blocks include the optional Super Lamp Power supply for 1 or 4 lamps, the optional coded lamp recognition, the optional automatic burner rotation and optional Electronic Sample Viewing which allows real time colour viewing of sample compartment, a must for graphite furnace analysis.
The SavantAA is also available as the SavantAA No Flame which is without a gasbox allowing a dedicated graphite furnace or hydride AAS.
The SavantAA is controlled by the SavantAA Windows® based software offering the ultimate combination of power and simplicity.
rotation.
- USB communications.
- GBC AAS Equipment
Advanced Features
- Eight lamp fully automated turret with auto alignment of lamps for sequential multi-element analysis.
- Programmable flame control with ten safety interlocks provides reproducible operation with gas flows automatically set when changing methods.
- All-reflective optics for high light throughput.
- Automatic wavelength setting, 185 to 900 nm.
- Continuously adjustable slit width 0.1 to 2.0 nm in 0.1 nm increments in both normal and reduced height with automatic setting.
- Asymmetric modulation reduces noise by up to 40%.
- Hyper Pulse fast background correction provides 175-423 nm correction range, at up to 2.5 Abs.
- Optional Coded lamp recognition.
- Optional 1 or 4 Super Lamp Power Supply.
- Optional Automatic burner rotation.
- USB communications.
SavantAA Σ
The SavantAA Σ (pronounced SavantAA Sigma) is our top-of-the-range Gbc AAS Equipment. It is a state-of-the-art fully automated, multi-element, true double beam instrument with all-reflective optics. It is fully computer-controlled, including the burner adjuster, burner rotation, Super Lamp Power Supply, Electronic Sample Viewing, Lamp optimization, wavelength and slit setting and gas control, using SavantAA Windows® based software.
Advanced Features
- Eight lamp fully automated turret with auto alignment of lamps for sequential multi-element analysis.
- Programmable flame control with ten safety interlocks provides reproducible operation with gas flows automatically set when changing methods.
- All-reflective optics for high light throughput.
- Automatic wavelength setting, 175 to 900 nm.
- Continuously adjustable slit width 0.1 to 2.0 nm in 0.1 nm increments in both normal and reduced height with automatic setting.
- Asymmetric modulation reduces noise by up to 40%.
- Hyper Pulse fast background correction provides 175-423 nm correction range, at up to 2.5 Abs.
- Coded lamp recognition.
- Super Lamp Power Supply for 1 lamp (optional 4 lamp SLPS).
- Motorised work head adjuster.
- Automatic burner rotation.
- USB communications.
XplorAA
Test the boundaries with the new robust XplorAA!
Suitable for use in the following industries: Agriculture, Biochemistry, Environment, Food Products, Forensic Chemistry, Geochemistry, Industrial Analysis, Metallurgy, Petrochemistry, Pharmaceuticals and Cosmetics, Universities, Colleges and Research Establishments.
Advanced Features
- Wavelength range of 175 – 900 nm
- Continuously adjustable slit width from 0.1 to 2.0 nm for both normal and reduced height
- Extended D2 working range of 175 – 425 nm
- Asymmetric modulation – 40% noise reduction
- HYPER-PULSE background correction for accurate correction of transient background signals to 2.5 Abs
- Fully Integrated Liquid Trap
- Choice of Single beam or Double beam optics
- Choice of manual 2 lamp or motorised 6 lamp turret
- Choice of Manual, Automatic or Programmable Gasbox
- Optional Super Lamp power supply for improved sensitivity, detection limits and calibration linearity
- Optional coded hollow cathode lamp recognition
- Optional Air Purge Kit which allows clean air from air cylinder or an air compressor to prevent acidic fumes
- Lightweight for Easy Portability
GeminAA Plus
GeminAA Plus atomic absorption spectrometer with flame emission capability. Flame and Graphite Furnace Tandem System. Comes standard with air-acetylene and nitrous oxide-acetylene burners and furnace/flame universal autosampler.
Features Include:
- Fully automated eight lamp turret with automatic lamp optimization, self alignment and automatic peaking of the hollow cathode lamp in two planes for maximum light throughput at the beginning of each analysis to ensure optimum accuracy.
- Flame and Graphite Furnace Tandem System.
- Automatic switch over from flame to furnace and vice versa via software.
- Automatic searching of optimum burner height.
- Deuterium background Correction.
- Self absorption background correction.
- Electronic Sample Viewing (ESV).
- Gases are all computer controlled.
- Auto ignition via software.
- Wavelength range: 190 – 900 nm.
- Spectral bandwidth: 1 – 2.0 nm.
- 1,800 l/mm holographic grating.
- All Titanium Burner heads adjusted automatically via software.
- Universal furnace/flame autosampler included which can accommodate up to 133 samples and five 25 mL modifiers.
- Furnace temperature range from ambient to 3000°C.
- Maximum Furnace Temperature Rise Rate: ≥2000°C/s.
- Automatic hollow cathode lamp warm up of next element.
enduro T2100
The enduro T2100 Atomic Absorption Spectrophotometer is a Tandem Flame and Furnace Atomic Absorption Spectrometer with transverse heating and longitudinal Zeeman background correction with variable magnetic field strength for furnace and deuterium background correction for flame. The instrument has improved background correction performance and exceeds the requirements of the analysis of food, environmental, biological and other complex matrices.
enduro T2100
– Top of the Range Zeeman Furnace
– Deuterium Flame Tandem AAS
The enduro T2100 is packed with these great features:
- Transversely heated graphite furnace technology ensures high efficiency and homogeneity of sample atomisation.
- Longitudinal Zeeman and Deuterium Lamps are two types of background correction modes provided which allow the user to select the appropriate mode.
- Unique adjustable magnetic field strength 0.6 – 1.1 Tesla in 0.1 Tesla increments, to ensure high sensitivity and precision.
- 8-lamp automatic lamp turret with auto-alignment feature to ensure fast lamp selection and optimisation.
- Coded lamp recognition technology, which can recognize both hollow cathode lamps and super lamps.
- Super lamp power supply, with the latest design, to ensure greater sensitivity while consuming less power and generating less heat.
AAS Software
All current GBC AA spectrometers can be operated via the powerful SavantAA Windows® software package (which is also available as an upgrade to the Avanta range, SensAA range, XplorAA range, 933/2 range, and 906/908/909 range). Reflecting a deep understanding of user requirements, SavantAA software offers unmatched power and capability, with a simplified graphical interface.
Analytical features include calibration with up to ten standards, using exact fit curve correction, least squares, linear least squares, standards addition or bracketing standards. Complete quality controls include check samples, spike recoveries, calibration failure, and QC limits.
Meeting the needs of verification and validation processes, the SavantAA software includes full compliance with requirements for electronic records and signatures. Full auditable activity histories are recorded for good management practices.
Other powerful features include Intelligent Lamp Warmup, Remaining Time for completion of Analysis and Turn key solutions. This facilty allows any specific Method File, Sample File, Results File, Instrument Setting or any other file to be directly assigned to an ICON on your PC. A user simply needs to click on this icon and the desired file is opened automatically.
Also there is a comprehensive report writing, quality control protocols and simplified networking capabilities. Full use is made of the multi-tasking facilities of Windows® to dramatically increase laboratory productivity.
AAS Accessories
GBC manufactures a full range of atomic absorption sampling accessories to cover all analytical requirements. They can be fitted to any GBC AAS, except the SavantAA Z enduro.
System 5000
The GBC System 5000 is an automated graphite furnace system which may be used with any GBC AAS and provides determination capability to sub-ppb concentrations for most elements. The furnace system includes the GF5000 graphite furnace power supply and workhead plus the PAL programmable automatic sample loader. The system is controlled by the AAS system software.
Use ESV to watch your sample inject, dry, ash and even atomise during the furnace program. Method development has never been this easy. ESV comes standard with the SavantAA Zeeman and SavantAA Σ and is optional with the SavantAA. Contact us to learn more.
GF 5000 Graphite Furnace
GF 5000 Graphite Furnace The furnace assembly includes graphite tube (complete with platform for reduced chemical interferences, if required) mounted in an enclosure with quartz windows.
It can be used in conjunction with any GBC AAS. Installation is simple, with a permanent attachment to the power supply by an umbilical cord which contains all necessary connections including gas, cooling water and electrical supplies. The temperature range of ambient to 3000° C is computer controlled with a maximum ramp rate of 2000°C/sec.
Analytical features include calibration with up to ten standards, using exact fit curve correction, least squares, linear least squares, standards addition or bracketing standards. Complete quality controls include check samples, spike recoveries, calibration failure, and QC limits.
Meeting the needs of verification and validation processes, the SavantAA software includes full compliance with requirements for electronic records and signatures. Full auditable activity histories are recorded for good management practices.
Other powerful features include Intelligent Lamp Warmup, Remaining Time for completion of Analysis and Turn key solutions. This facilty allows any specific Method File, Sample File, Results File, Instrument Setting or any other file to be directly assigned to an ICON on your PC. A user simply needs to click on this icon and the desired file is opened automatically.
Also there is a comprehensive report writing, quality control protocols and simplified networking capabilities. Full use is made of the multi-tasking facilities of Windows® to dramatically increase laboratory productivity.
AAS Accessories
GBC manufactures a full range of atomic absorption sampling accessories to cover all analytical requirements. They can be fitted to any GBC AAS, except the SavantAA Z enduro.
System 5000
The GBC System 5000 is an automated graphite furnace system which may be used with any GBC AAS and provides determination capability to sub-ppb concentrations for most elements. The furnace system includes the GF5000 graphite furnace power supply and workhead plus the PAL programmable automatic sample loader. The system is controlled by the AAS system software.
Use ESV to watch your sample inject, dry, ash and even atomise during the furnace program. Method development has never been this easy. ESV comes standard with the SavantAA Zeeman and SavantAA Σ and is optional with the SavantAA. Contact us to learn more.
PAL Furnace Auto Sampler
PAL Furnace Auto Sampler The sampler is an essential component of the furnace system and each accommodates around 40 samples and 10 pre-mixed standards, plus one stock solution for automatic mixing of up to 10 standards. Multiple carousels can be used in an analysis.
Dispensed volume is up to 100 µL, programmable in 1 µL increments. Program options include automatic mixing of standards, automatic injection of chemical modifiers, multiple injection, heated injection, plus complete re-slope, re-calibration, check sample or spike recovery routines.
Analytical features include calibration with up to ten standards, using exact fit curve correction, least squares, linear least squares, standards addition or bracketing standards. Complete quality controls include check samples, spike recoveries, calibration failure, and QC limits.
Meeting the needs of verification and validation processes, the SavantAA software includes full compliance with requirements for electronic records and signatures. Full auditable activity histories are recorded for good management practices.
Other powerful features include Intelligent Lamp Warmup, Remaining Time for completion of Analysis and Turn key solutions. This facilty allows any specific Method File, Sample File, Results File, Instrument Setting or any other file to be directly assigned to an ICON on your PC. A user simply needs to click on this icon and the desired file is opened automatically.
Also there is a comprehensive report writing, quality control protocols and simplified networking capabilities. Full use is made of the multi-tasking facilities of Windows® to dramatically increase laboratory productivity.
AAS Accessories
GBC manufactures a full range of atomic absorption sampling accessories to cover all analytical requirements. They can be fitted to any GBC AAS, except the SavantAA Z enduro.
System 5000
The GBC System 5000 is an automated graphite furnace system which may be used with any GBC AAS and provides determination capability to sub-ppb concentrations for most elements. The furnace system includes the GF5000 graphite furnace power supply and workhead plus the PAL programmable automatic sample loader. The system is controlled by the AAS system software.
Use ESV to watch your sample inject, dry, ash and even atomise during the furnace program. Method development has never been this easy. ESV comes standard with the SavantAA Zeeman and SavantAA Σ and is optional with the SavantAA. Contact us to learn more.
HG3000 Hydride System and EHG3000 Electric Cell Heater
The HG3000 Hydride generator forms part of a complete hydride system which can be used in conjunction with any GBC AAS for trace level analysis of the hydride forming elements (arsenic, selenium, antimony, bismuth, tellurium, tin, germanium and lead at parts per billion concentration level), and mercury by the cold vapour method. Detection limits of 1 ppb are routinely achievable. Typical sample throughput is around 60 samples per hour taking three replicate measurements, with a typical precision of 1%.
The quartz cell used for hydride analysis can be heated by flame, or by the optional EHG3000 electric cell heater. The EHG3000 provides a temperature controlled electric heating blanket to heat the quartz cell, and includes power supply, temperature controller and workhead. The EHG3000 provides more accurate temperature control than is possible with flame heating.
Analytical features include calibration with up to ten standards, using exact fit curve correction, least squares, linear least squares, standards addition or bracketing standards. Complete quality controls include check samples, spike recoveries, calibration failure, and QC limits.
Meeting the needs of verification and validation processes, the SavantAA software includes full compliance with requirements for electronic records and signatures. Full auditable activity histories are recorded for good management practices.
Other powerful features include Intelligent Lamp Warmup, Remaining Time for completion of Analysis and Turn key solutions. This facilty allows any specific Method File, Sample File, Results File, Instrument Setting or any other file to be directly assigned to an ICON on your PC. A user simply needs to click on this icon and the desired file is opened automatically.
Also there is a comprehensive report writing, quality control protocols and simplified networking capabilities. Full use is made of the multi-tasking facilities of Windows® to dramatically increase laboratory productivity.
AAS Accessories
GBC manufactures a full range of atomic absorption sampling accessories to cover all analytical requirements. They can be fitted to any GBC AAS, except the SavantAA Z enduro.
System 5000
The GBC System 5000 is an automated graphite furnace system which may be used with any GBC AAS and provides determination capability to sub-ppb concentrations for most elements. The furnace system includes the GF5000 graphite furnace power supply and workhead plus the PAL programmable automatic sample loader. The system is controlled by the AAS system software.
Use ESV to watch your sample inject, dry, ash and even atomise during the furnace program. Method development has never been this easy. ESV comes standard with the SavantAA Zeeman and SavantAA Σ and is optional with the SavantAA. Contact us to learn more.
MC3000 Mercury Concentrator
The MC3000 mercury concentrator is used in conjunction with the HG3000 and adds parts per trillion capability to the hydride system for the analysis of mercury vapour, using a gold amalgam as the concentrating medium. The MC3000 consists of a power supply and workhead with built in gold foil trap and a quartz absorption cell. It is controlled by the AAS software, which provides programmable load time, number of replicates, flush time and clean.
Analytical features include calibration with up to ten standards, using exact fit curve correction, least squares, linear least squares, standards addition or bracketing standards. Complete quality controls include check samples, spike recoveries, calibration failure, and QC limits.
Meeting the needs of verification and validation processes, the SavantAA software includes full compliance with requirements for electronic records and signatures. Full auditable activity histories are recorded for good management practices.
Other powerful features include Intelligent Lamp Warmup, Remaining Time for completion of Analysis and Turn key solutions. This facilty allows any specific Method File, Sample File, Results File, Instrument Setting or any other file to be directly assigned to an ICON on your PC. A user simply needs to click on this icon and the desired file is opened automatically.
Also there is a comprehensive report writing, quality control protocols and simplified networking capabilities. Full use is made of the multi-tasking facilities of Windows® to dramatically increase laboratory productivity.
AAS Accessories
GBC manufactures a full range of atomic absorption sampling accessories to cover all analytical requirements. They can be fitted to any GBC AAS, except the SavantAA Z enduro.
System 5000
The GBC System 5000 is an automated graphite furnace system which may be used with any GBC AAS and provides determination capability to sub-ppb concentrations for most elements. The furnace system includes the GF5000 graphite furnace power supply and workhead plus the PAL programmable automatic sample loader. The system is controlled by the AAS system software.
Use ESV to watch your sample inject, dry, ash and even atomise during the furnace program. Method development has never been this easy. ESV comes standard with the SavantAA Zeeman and SavantAA Σ and is optional with the SavantAA. Contact us to learn more.
SDS3000 / SDS3000D Sample Delivery System
The SDS3000 is an X-Y-Z auto sampler system for flame AAS, ICP-OES or ICP-MS. It can be used for flame analysis, hydride generation, mercury cold vapour analysis and with the MC3000 mercury concentrator. It can also be used with the Autosipper with the Cintra 2020, 3030 or 4040.
The SDS3000 is a precision engineered X-Y-Z auto sampler. Designed and fabricated by GBC Scientific Equipment, this affordable auto sampler provides accurate and fast analysis due to its durable, reliable and sturdy design. Supplied with four sample racks to hold 240 sample vials each of approximately 14 mL and a standards rack to hold 10 standard vials plus a blank each with a volume of approximately 50 mL. PTFE and PEEK material is used to provide a metal free liquid flow path. Variable continuous flow sample probe rinse station with peristaltic pump minimizes sample contamination and carryover. Software controls include rinse time, delay time, number of replicates, rescale rate, recalibration rate, measurement time and analysis order. Full random access capability is standard. Up to 360 samples can be loaded using 7 mL tubes.
The SDS3000D is the SDS3000 auto sampler with inbuilt dilutor. This new self-contained auto sampler/dilutor means no more messy tubing in your laboratory required by two separate units.
The SDS3000D can be used in two ways. Firstly, it can prepare your multi-element working standards from bulk standards automatically and accurately and secondly it can dilute any over range samples automatically and accurately.
Atom Trap
Atom Trap Enhance sensitivity for certain elements using the GBC Atom Trap. The Atom Trap is a flame-heated quartz cell which is placed in the optical path. It enhances sensitivity by providing a longer residence time for the analyte in the excitation zone
Analytical features include calibration with up to ten standards, using exact fit curve correction, least squares, linear least squares, standards addition or bracketing standards. Complete quality controls include check samples, spike recoveries, calibration failure, and QC limits.
Meeting the needs of verification and validation processes, the SavantAA software includes full compliance with requirements for electronic records and signatures. Full auditable activity histories are recorded for good management practices.
Other powerful features include Intelligent Lamp Warmup, Remaining Time for completion of Analysis and Turn key solutions. This facilty allows any specific Method File, Sample File, Results File, Instrument Setting or any other file to be directly assigned to an ICON on your PC. A user simply needs to click on this icon and the desired file is opened automatically.
Also there is a comprehensive report writing, quality control protocols and simplified networking capabilities. Full use is made of the multi-tasking facilities of Windows® to dramatically increase laboratory productivity.
AAS Consumables
Application Source
The Application Source is a unique high intensity light source designed specifically for atomic absorption spectroscopy and is configured to provide line spectra for specific applications such as –
- Environmental
- Stainless Steel
- Petrochemical
- Steel
- Mining
- Alloys
- Base Metals
- Clinical Alkali Earths
- Soil
- Food & Beverage
- Plant
- Clinical trace toxic
- Special (Customized version)
In addition the Application Source can be configured to meet application-specific requirements. Analytical performance for each element in the Application Source is equivalent to single element hollow cathode lamps and at a fraction of the cost. For further information, please contact us.
Partition Graphite Furnace Tube
Now available for the SavantAA Z enduro (Zeeman Effect) Atomic Absorption Spectrometer range. These tubes will allow single alliquote of up to 100ul without the risk of excess spreading in the tube allowing improved sensitivity. Additionally as spread is “standardised” by the partions built into the tube, improved %RSDs can be achieved for larger volume sample injections. Part Number is 45-0021-00
AAS Application Notes
