-
pH/ORP
-
ISE
-
EC/TDS/Salinity
-
Dissolved Oxygen
-
Multiparameter
Backpacks Labs
Single Parameters
ABS Plastic
Stainless Steel
Monitors
Dataloggers
Controllers and Transmitters
Dosing Pumps
Mini Controllers
PCA Chlorine
Probes
Swimming Pool and Spa Controllers
pH
ORP
ISE
TDS
Dissolved Oxygen
Temperature
Multiparameter
Bluetooth
Photometric Probes
Checker HC
Chemical Test Kits
Photometers
Titration
Calibration Solutions
Fill Solutions
Storage Solutions
Cleaning Solutions
Sample Prep Solutions
ISE Solutions
Titration Solutions
CAL Check Standards
- Checker HC Colorimeters
- COD Meters
- Dissolved Oxygen
- ISE Meters
- Lab Supply
- Multiparameter Meters
- pH Meters
- Photometers
- Resistivity
- Testers
- Thermometers
- Titrators
- Turbidity Meters
0.1° Resolution K-Type Thermocouple Thermometer with CAL Button - HI93531N
The HI93531N is a 0.1° resolution K-type thermocouple thermometer that can be used with a wide variety of K-type probes. This thermometer offers temperature readouts in both degrees Celsius and Fahrenheit. Featuring a one-point calibration, up to ±0.5℃ accuracy, and a backlit LCD, the HI93531N is perfectly suited for high accuracy temperature measurements in the laboratory, field, or dimly lit areas.
CAL Function – The HI93531N can be calibrated at one point in a 0℃ ice bath when the probes are interchanged to achieve the highest possible accuracy.
Interchangeable Probes – A wide range of K-type thermocouple probes are available to meet the specific needs of users. Any of the HI766 series of probes can be interchanged with the HI93531N to measure the temperature of surfaces, gases, air, liquid, semi-solid samples, and more.
℃/℉ Readout – Measurements can be displayed in either degrees Celsius or Fahrenheit. A simple press of the ℃/℉ button will switch between the scales.
High/Low Function – The maximum and minimum temperature values are continuously monitored and displayed on the lower portion of the HI93531N LCD display during a measurement session. The CLR button clears the high and low values on the LCD display.
HOLD Function – The HOLD button on the face of the meter freezes the display to allow the user time to record readings. Although the display is frozen, the meter continues to internally monitor the temperature and update the high and low measurement values.
Backlit LCD – The LCD display is equipped with a backlight feature that can easily be activated through the BL button for low or no light conditions. The backlight automatically shuts off after approximately one minute when no buttons are pressed to preserve battery life.
Battery Error Prevention System (BEPS) – The Battery Error Prevention System detects when the batteries become too weak to ensure reliable measurements.
Low Battery Indicator – When the battery level is below 10%, a warning symbol will blink to indicate low battery condition.
HI93531N is supplied with batteries and instructions.
| SKU | HI93531N |
| Name | 0.1? Resolution K-Type Thermocouple Thermometer with CAL Button – HI93531N |
| K-Type Thermocouple Temperature Range | -200.0 to 999.9?C and 1000 to 1371?C; -328.0 to 999.9?F and 1000 to 2500?F |
| K-Type Thermocouple Temperature Resolution | 0.1?C (-149.9 to 999.9?C); 0.2?C (-200.0 to -150.0?C); 1?C (outside) 0.1?F (-24.9 to 999.9?F); 0.2?F (-249.9 to -25.0?F); 0.3?F (-328.0 to -250.0?F); 1?F (outside) |
| K-Type Thermocouple Temperature Accuracy | ?0.5?C (-100.0 to 999.9?C); ?1?C (outside); ?1?F (-148.0 to 999.9?F); ?1.5?F (outside) (for 1 year, excluding probe error) |
| Temperature Probe | HI766 series K-type thermocouple (not included) |
| Automatic Shut-Off | user selectable: 60 min or disabled |
| Display | Backlit LCD, CAL Button |
| Battery Type/Life | 1.5V AA (3) / approximately 500 hours of continuous use (with backlight off) |
| Environment | -10 to 60?C (14 to 122?F); RH max 100% |
| Dimensions | 150 x 80 x 36 mm (5.9 x 3.1 x 1.4”) |
| Weight | 235 g (8.3 oz) |
0.1° Resolution K-Type Thermocouple Thermometer with High/Low Limit Display - HI93531
The HI93531 is a 0.1° resolution K-type thermocouple thermometer that can be used with a wide variety of K-type probes. This thermometer offers temperature readouts in both degrees Celsius and Fahrenheit. Featuring up to ±0.5℃ accuracy and high and low limit temperature display, the HI93531 is perfectly suited for high accuracy temperature measurements in the laboratory or field.
Interchangeable Probes – A wide range of K-type thermocouple probes are available to meet the specific needs of users. Any of the HI766 series of probes can be interchanged with the HI93531 to measure the temperature of surfaces, gases, air, liquid, semi-solid samples, and more.
℃/℉ Readout – Measurements can be displayed in either degrees Celsius or Fahrenheit. A simple press of the ℃/℉ button will switch between the scales.
High/Low Function – The maximum and minimum temperature values are continuously monitored and displayed on the lower portion of the HI93531 LCD display during a measurement session. The CLR button clears the high and low values on the LCD display.
HOLD Function – The HOLD button on the face of the meter freezes the display to allow the user time to record readings. Although the display is frozen, the meter continues to internally monitor the temperature and update the high and low measurement values.
Battery Error Prevention System (BEPS) – The Battery Error Prevention System detects when the batteries become too weak to ensure reliable measurements.
Low Battery Indicator – When the battery level is below 10%, a warning symbol will blink to indicate low battery condition.
HI93531 is supplied with batteries and instructions.
| SKU | HI93531 |
| Name | 0.1? Resolution K-Type Thermocouple Thermometer with High/Low Limit Display – HI93531 |
| K-Type Thermocouple Temperature Range | -200.0 to 999.9?C and 1000 to 1371?C; -328.0 to 999.9?F and 1000 to 2500?F |
| K-Type Thermocouple Temperature Resolution | 0.1?C (-149.9 to 999.9?C); 0.2?C (-200.0 to -150.0?C); 1?C (outside) 0.1?F (-24.9 to 999.9?F); 0.2?F (-249.9 to -25.0?F); 0.3?F (-328.0 to -250.0?F); 1?F (outside) |
| K-Type Thermocouple Temperature Accuracy | ?0.5?C (-100.0 to 999.9?C); ?1?C (outside); ?1?F (-148.0 to 999.9?F); ?1.5?F (outside) (for 1 year, excluding probe error) |
| Temperature Probe | HI766 series K-type thermocouple (not included) |
| Automatic Shut-Off | user selectable: 60 min or disabled |
| Battery Type/Life | 1.5V AA (3) / approximately 500 hours of continuous use (with backlight off) |
| Environment | -10 to 60?C (14 to 122?F); RH max 100% |
| Dimensions | 150 x 80 x 36 mm (5.9 x 3.1 x 1.4”) |
| Weight | 235 g (8.3 oz) |
Foodcare T-Type Thermocouple Thermometer with Fixed Attached Probe - HI935008
The HI935008 is a waterproof portable T-Type thermocouple thermometer made for the food professional that is required to monitor temperature as part of a hazardous analysis of critical control points (HACCP) plan including in food service, production, packaging, transportation, restaurants or catering. The HI935008, as a meter, can measure over a wide range of temperatures from -50.0 ℃ (-58.0 ℉) up to 300 ℃ (572 ℉) and offers a very high accuracy of ±0.4 ℃ (±0.7 ℉). The accuracy of the meter is assured with advanced diagnostic features including CAL-Check that checks for abnormal drift of the internal electronics, battery error prevention system (BEPS) that will not allow a reading to be taken when there is not sufficient battery power and probe diagnostics that alert the user when the probe has been damaged.
HI935008 Foodcare thermometer is supplied with an attached T-Type thermocouple penetration probe that will reach 90% of the final reading within 15 seconds. The tip of the probe is just 3 mm (0.12″) in diameter allowing for easy penetrations into solids and semi-solids. The AISI 316 stainless steel body is 155 mm (6.1″) long and is safe for food contact in compliance with Regulation (EC) 1935/2004.
The HI935008 with the fixed attached penetration probe is certified according to EN13485:2001 standard that has strict requirements for accuracy, response time, operating and storage conditions as applied to the measurement of product temperature which are intended for use in transportation, storage and distribution facilities of refrigerated, frozen or deep-frozen food and ice cream.
There are many considerations when designing a thermometer for the food professional. Below are features that we considered to be important and beneficial.
| SKU | HI935008 |
| Name | Foodcare T-Type Thermocouple Thermometer with Fixed Attached Probe – HI935008 |
Foodcare K-Type Thermocouple Thermometer with Fixed Attached Probe - HI935007
The HI935007 is a waterproof portable K-Type thermocouple thermometer made for the food professional that is required to monitor temperature as part of a hazardous analysis of critical control points (HACCP) plan including in food service, production, packaging, transportation, restaurants or catering. The HI935007, as a meter, can measure over a wide range of temperatures from -50.0 ℃ (-58.0 ℉) up to 300 ℃ (572 ℉) and offers a very high accuracy of ±0.4 ℃ (±0.7 ℉). The accuracy of the meter is assured with advanced diagnostic features including CAL-Check that checks for abnormal drift of the internal electronics, battery error prevention system (BEPS) that will not allow a reading to be taken when there is not sufficient battery power and probe diagnostics that alert the user when the probe is not connected or has been damaged.
HI935007 Foodcare thermometer is supplied with a fixed attached penetration K-Type thermocouple probe that will reach 90% of the final reading within 15 seconds. The tip of FC766PW is just 3 mm (0.12″) in diameter allowing for easy penetrations into solids and semi-solids. The AISI 316 stainless steel body is 155 mm (6.1″) long and is safe for food contact in compliance with Regulation (EC) 1935/2004.
There are many considerations when designing a thermometer for the food professional. Below are features that we considered to be important and beneficial.
CAL Check
The calibration check (CAL Check) feature of the HI935007 is an internal diagnostic feature that checks for any drift in the electronics that occurs with all digital thermometers over time. When the meter is turned CAL Check looks to see if the internal calibration is within ±0.3 ℃. If the drift is greater and error (err) message will be displayed. With CAL Check you can be confident that the meter is working properly.
Low Battery Indicator
The included AAA batteries provide 3500 hours of continuous use. When the battery level is below 10%, a warning symbol will blink to indicate low battery condition. When low battery power may affect your results, the meter will shut down to avoid erroneous readings caused by low battery level.
Damaged Probe Messages
If the probe is damaged the message will be displayed along with four blinking dashed lines. For an accurate temperature measurement it is important to know that not only is the meter working properly but that the probe is okay.
Fast Response Probe
The attached penetration K-Type thermocouple probe that will reach 90% of the final reading within 15 seconds.
Small Penetration Tip
The tip of the probe is just 3 mm (0.12″) in diameter allowing for easy penetrations into solids and semi-solids.
AISI316 Stainless Steel Body
The AISI 316 stainless steel body is 155 mm (6.1″) long and is safe for food contact in compliance with Regulation (EC) 1935/2004.
Additional Features/Benefits:
Supplied with Instrument Quality Certificate
- HI935007 with the K-Type penetration probe are calibrated according to an ISO9001 calibration system using standards and reference instruments in which the accuracy is traceable the National Institute of Standards (NIST) in the USA, or to internationally acceptable physical standards. For traceability, the HI935007 meter is supplied with an instrument quality certificate including measured values along with reference values.
Large LCD
- An enhanced LCD displays the measurement reading in ℃ or ℉, stability indicator, error messages, and low battery indicator.
Stability Indicator
- An hourglass indicator is displayed on the LCD until a stable reading is obtained. Once a reading stabilizes, the indicator disappears and a reading can be taken.
Automatic Shut-off
- The meter can be set to automatically turn off after 8 minutes or 60 minutes to conserve battery life in the event that the meter is left on. The auto-off feature can also be disabled.
Ergonomic, rugged, waterproof (IP65) design
- For additional protection the HI710027 shockproof rubber boot is available as an accessory.
HI935007 is supplied with K-Type thermocouple penetration probe, batteries, instruction manual, and instrument quality certificate.
| SKU | HI935007 |
| Name | Foodcare K-Type Thermocouple Thermometer with Fixed Attached Probe – HI935007 |
| K-Type Thermocouple Temperature Range | -50.0 to 199.9 ℃; 200 to 300 ℃ -58.0 to 399.9 °F; 400 to 573 °F |
| K-Type Thermocouple Temperature Resolution | 0.1 ℃ (-50.0 to 199.9 ℃); 1 ℃ (200 to 300 ℃) 0.1 °F (-58.0 to 399.9 °F); 1 oF (400 to 573 °F) |
| K-Type Thermocouple Temperature Accuracy | ? 0.4 ℃ (-50.0 to 300 ℃) ? 0.7°F (-58.0 to 573 °F) |
| Temperature Probe | K-Type attached penetration probe (fixed) |
| Automatic Shut-Off | user selectable: off, 8 or 60 m in. |
| Battery Type/Life | 1.5V AAA battery (3 pcs.) / approximately 3500 hours of continuous use |
| Environment | operating conditions: -30 to 50?C (-22 to 122?F); storage and transportation: -40 to 70?C (-40 to 158?F); relative humidity: 100% |
| Dimensions | 140 x 57 x 28 mm (5.5 x 2.2 x 1.1”) |
| Weight | 178 g (6.27 oz.) |
K-Type Thermocouple Thermometer with Auto-off Capability - HI935005
The HI935005 is a K-type thermocouple thermometer that can be used with a wide variety of K-type probes. This thermometer offers two measurement ranges from -50.0 to 199.9℃ and 200 to 1350℃ which can also be displayed in ℉ (-58.0 to 399.9℉ and 400 to 2462℉). With a ±0.2% full scale accuracy, the HI935005 waterproof thermometers are perfectly suited for temperature measurements in the laboratory or the field.
℃/℉ Readout – Measurements can be displayed in either degrees Celsius or Fahrenheit. A simple press of the ℃/℉ button will switch between the scales.
Interchangeable Probes – A wide range of K-type thermocouple probes are available to meet the specific needs of users. Any of the HI766 series of probes can be interchanged with the HI935005 to measure temperature of surfaces, gases, air, liquid, semi-solid samples, and more.
High/Low Function – The maximum and minimum temperature values are continuously monitored and displayed on the lower portion of the HI935005 LCD display during a measurement session. The CLR button clears the high and low values on the LCD display.
HOLD Function – The HOLD button on the face of the meter freezes the display to allow the user time to record readings. Although the display is frozen, the meter continues to internally monitor the temperature and update the high and low measurement values.
Auto Shut-off – Users can select to enable automatic shut off after 8 or 60 minutes of non-use or select to disable the shut-off feature.
Battery Error Prevention System (BEPS) – The Battery Error Prevention System detects when the batteries become too weak to ensure reliable measurements.
Low Battery Indicator – When the battery level is below 10%, a warning symbol will blink to indicate low battery condition.
HI935005 is supplied with batteries and instruction manual.
| SKU | HI935005 |
| Name | K-Type Thermocouple Thermometer with Auto-off Capability – HI935005 |
| K-Type Thermocouple Temperature Range | -50.0 to 199.9?C / 200 to 1350?C; -58.0 to 399.9?F / 400 to 2462?F |
| K-Type Thermocouple Temperature Resolution | 0.1?C (up to 199.9?C) / 1?C (outside); 0.1?F (up to 399.9?F) / 1?F (outside) |
| K-Type Thermocouple Temperature Accuracy | ?0.2% FS (excluding probe error) |
| Temperature Probe | HI766 series K-type thermocouple (not included) |
| Automatic Shut-Off | 8 min (default), 60 min or OFF |
| Battery Type/Life | 1.5V AA (3) / approximately 1600 hours of continuous use |
| Environment | -10 to 50?C (14 to 122?F); RH max 100% |
| Dimensions | 150 x 80 x 36 mm (5.9 x 3.1 x 1.4”) |
| Weight | 235 g (8.3 oz) |
Foodcare T-Type Thermocouple Thermometer with Ultra-Fast Detachable Probe - HI9350041
The HI9350041 is a waterproof portable T-Type thermocouple thermometer made for the food professional that is required to monitor temperature as part of a hazardous analysis of critical control points (HACCP) plan including in food service, production, packaging, transportation, restaurants or catering. The HI9350041, as a meter, can measure over a wide range of temperatures from -50.0 ℃ (-58.0 ℉) up to 300 ℃ (572 ℉) and offers a very high accuracy of ±0.4 ℃ (±0.7 ℉). The accuracy of the meter is assured with advanced diagnostic features including CAL-Check that checks for abnormal drift of the internal electronics, battery error prevention system (BEPS) that will not allow a reading to be taken when there is not sufficient battery power and probe diagnostics that alert the user when the probe is not connected or has been damaged.
HI9350041 Foodcare thermometer is supplied with the replaceable FC767C1 Ultra-Fast T-Type thermocouple probe that will reach 90% of the final reading within 4 seconds. The tip of FC767C1 is just 1.6 mm (0.06″) in diameter allowing for easy penetrations into solids and semi-solids. The AISI 316 stainless steel body is 95 mm (3.7″) long and is safe for food contact in compliance with Regulation (EC) 1935/2004.
The HI9350041 with the HI767C1 is certified according to EN13485:2001 standard that has strict requirements for accuracy, response time, operating and storage conditions as applied to the measurement of product temperature which are intended for use in transportation, storage and distribution facilities of refrigerated, frozen or deep-frozen food and ice cream.
There are many considerations when designing a thermometer for the food professional. Below are features that we considered to be important and beneficial.
CAL Check
The calibration check (CAL Check) feature of the HI9350041 is an internal diagnostic feature that checks for any drift in the electronics that occurs with all digital thermometers over time. When the meter is turned CAL Check looks to see if the internal calibration is within ±0.3 ℃. If the drift is greater and error (err) message will be displayed. With CAL Check you can be confident that the meter is working properly.
Low Battery Indicator
The included AAA batteries provide 3500 hours of continuous use. When the battery level is below 10%, a warning symbol will blink to indicate low battery condition. When low battery power may affect your results, the meter will shut down to avoid erroneous readings caused by low battery level.
Missing or Damaged Probe Messages
The “NO PROBE” message is displayed on the meter when a thermocouple probe is not attached. If the probe is damaged the message will be displayed along with four blinking dashed lines. For an accurate temperature measurement it is important to know that not only is the meter working properly but that the probe is okay.
Ultra-Fast Response Probe
FC767C1 T-Type thermocouple probe is incredibly fast and will reach 90% of the final reading within 4 seconds.
Small Penetration Tip
The tip of FC767C1 is just 1.6 mm (0.06″) in diameter allowing for easy penetrations into solids and semi-solids.
AISI316 Stainless Steel Body
The AISI 316 stainless steel body is 95 mm (3.7″) long and is safe for food contact in compliance with Regulation (EC) 1935/2004.
Additional Features/Benefits:
Supplied with Instrument Quality Certificate
- HI9350041 with the FC767C1 are calibrated according to an ISO9001 calibration system using standards and reference instruments in which the accuracy is traceable the National Institute of Standards (NIST) in the USA, or to internationally acceptable physical standards. For traceability, the HI9350041 meter is supplied with an instrument quality certificate including measured values along with reference values.
Large LCD
- An enhanced LCD displays the measurement reading in ℃ or ℉, stability indicator, error messages, and low battery indicator.
Stability Indicator
- An hourglass indicator is displayed on the LCD until a stable reading is obtained. Once a reading stabilizes, the indicator disappears and a reading can be taken.
Automatic Shut-off
- The meter can be set to automatically turn off after 8 minutes or 60 minutes to conserve battery life in the event that the meter is left on. The auto-off feature can also be disabled.
Ergonomic, rugged, waterproof (IP65) design
- For additional protection the HI710027 shockproof rubber boot is available as an accessory.
HI9350041 portable T-type thermometer is supplied complete with: HI767C1 ultra-fast temperature probe, batteries, quick reference guide, and instruction manual.
| SKU | HI9350041 |
| Name | Foodcare T-Type Thermocouple Thermometer with Ultra-Fast Detachable Probe – HI9350041 |
| T-Type Thermocouple Temperature Range | ?50.0 to 199.9 ?C ; 200 to 300 ?C ?58.0 to 399.9 ?F ; 400 to 572 ?F |
| T-Type Thermocouple Temperature Resolution | 0.1 ?C (?50.0 to 199.9 ?C); 1 ?C (200 to 300 ?C) 0.1 ?F (?58.0 to 399.9 ?F); 1 ?F (400 to 572 ?F) |
| T-Type Thermocouple Temperature Accuracy | ?0.4 ?C (?50.0 to 300 ?C) ?0.7 ?F (?58.0 to 572 ?F) |
| Automatic Shut-Off | user selectable: 8 min, 60 min or disabled |
| Battery Type/Life | 1.5V AAA battery (3 pcs.) / approximately 3500 hours of continuous use |
| Environment | climatic environments: for air (type E) rated operating conditions: -20 to 50?C (-4 to 122?F); limiting conditions: -30 to 50?C (-22 to 122?F); storage and transportation conditions: -40 to 70?C (-40 to to 70?C (-40 to 158?F); RH 100% |
| Dimensions | 140 x 57 x 28 mm (5.5 x 2.2 x 1.1”) |
| Weight | 178 g (6.27 oz.) |
Foodcare T-Type Thermocouple Thermometer with Detachable Probe - HI935004
The HI935004 is a waterproof portable T-Type thermocouple thermometer made for the food professional that is required to monitor temperature as part of a hazardous analysis of critical control points (HACCP) plan including in food service, production, packaging, transportation, restaurants or catering. The HI935004, as a meter, can measure over a wide range of temperatures from -50.0 ℃ (-58.0 ℉) up to 300 ℃ (572 ℉) and offers a very high accuracy of ±0.4 ℃ (±0.7 ℉). The accuracy of the meter is assured with advanced diagnostic features including CAL-Check that checks for abnormal drift of the internal electronics, battery error prevention system (BEPS) that will not allow a reading to be taken when there is not sufficient battery power and probe diagnostics that alert the user when the probe is not connected or has been damaged.
HI935004 Foodcare thermometer is supplied with the replaceable FC767PW T-Type thermocouple probe that will reach 90% of the final reading within 15 seconds. The tip of FC767PW is just 3 mm (0.12″) in diameter allowing for easy penetrations into solids and semi-solids. The AISI 316 stainless steel body is 155 mm (6.1″) long and is safe for food contact in compliance with Regulation (EC) 1935/2004.
The HI935004 with the HI767PW is certified according to EN13485:2001 standard that has strict requirements for accuracy, response time, operating and storage conditions as applied to the measurement of product temperature which are intended for use in transportation, storage and distribution facilities of refrigerated, frozen or deep-frozen food and ice cream.
There are many considerations when designing a thermometer for the food professional. Below are features that we considered to be important and beneficial.
CAL Check
The calibration check (CAL Check) feature of the HI935004 is an internal diagnostic feature that checks for any drift in the electronics that occurs with all digital thermometers over time. When the meter is turned CAL Check looks to see if the internal calibration is within ±0.3 ℃. If the drift is greater and error (err) message will be displayed. With CAL Check you can be confident that the meter is working properly.
Low Battery Indicator
The included AAA batteries provide 3500 hours of continuous use. When the battery level is below 10%, a warning symbol will blink to indicate low battery condition. When low battery power may affect your results, the meter will shut down to avoid erroneous readings caused by low battery level.
Missing or Damaged Probe Messages
The “NO PROBE” message is displayed on the meter when a thermocouple probe is not attached. If the probe is damaged the message will be displayed along with four blinking dashed lines. For an accurate temperature measurement it is important to know that not only is the meter working properly but that the probe is okay.
Fast Response Probe
FC767PW T-Type thermocouple probe that will reach 90% of the final reading within 15 seconds.
Small Penetration Tip
The tip of FC767PW is just 3 mm (0.12″) in diameter allowing for easy penetrations into solids and semi-solids.
AISI316 Stainless Steel Body
The AISI 316 stainless steel body is 155 mm (6.1″) long and is safe for food contact in compliance with Regulation (EC) 1935/2004.
Additional Features/Benefits:
Supplied with Instrument Quality Certificate
- HI935004 with the FC767PW are calibrated according to an ISO9001 calibration system using standards and reference instruments in which the accuracy is traceable the National Institute of Standards (NIST) in the USA, or to internationally acceptable physical standards. For traceability, the HI935004 meter is supplied with an instrument quality certificate including measured values along with reference values.
Large LCD
- An enhanced LCD displays the measurement reading in ℃ or ℉, stability indicator, error messages, and low battery indicator.
Stability Indicator
- An hourglass indicator is displayed on the LCD until a stable reading is obtained. Once a reading stabilizes, the indicator disappears and a reading can be taken.
Automatic Shut-off
- The meter can be set to automatically turn off after 8 minutes or 60 minutes to conserve battery life in the event that the meter is left on. The auto-off feature can also be disabled.
Ergonomic, rugged, waterproof (IP65) design
- For additional protection the HI710027 shockproof rubber boot is available as an accessory.
| SKU | HI935004 |
| Name | Foodcare T-Type Thermocouple Thermometer with Detachable Probe – HI935004 |
Dual Channel K-Type Thermocouple Thermometer - HI935002
The HI935002 is a two channel, K-type thermocouple thermometer that can be used with a wide variety of K-type probes. This thermometer offers two measurement ranges from -50.0 to 199.9℃ and 200 to 1350℃ which can also be displayed in ℉ (-58.0 to 399.9℉ and 400 to 2462℉). It features a one-point calibration, ±0.2% full-scale accuracy, and two input channels. The HI935002 is perfectly suited for high accuracy temperature measurements in the laboratory or field and is ideal for monitoring two samples at once.
Two Channels – HI935002 can monitor samples through two independent temperature channels. With two probes connected to the thermometer, temperature can be monitored in two samples at the same time. With both channels in use, a press of the T1/T2 button allows users to display the desired channel and measurement
℃/℉ Readout – Measurements can be displayed in either degrees Celsius or Fahrenheit. With a simple switch on the back of the meter, the meter can display readings in the ℃ or ℉ scale.
Interchangeable Probes – A wide range of K-type thermocouple probes are available to meet the specific needs of users. Any of the HI766 series of probes can be interchanged with the HI935002 to measure the temperature of surfaces, gases, air, liquid, semi-solid samples, and more.
High/Low Function – The maximum and minimum temperature values are continuously monitored and displayed on the lower portion of the HI935002 LCD display during a measurement session. The CLR button clears the high and low values on the LCD display.
Two Display Modes – The LCD can display standard or relative measurement mode. In standard mode, the display shows the current temperature and the high and low limits for the appropriate channel. In relative mode, the current temperature is set as the reference temperature for the appropriate channel; the display then shows the difference from the reference temperature.
HOLD Function – The HOLD button on the face of the meter freezes the display to allow the user time to record readings. Although the display is frozen, the meter continues to internally monitor the temperature and update the high and low measurement values.
Battery Error Prevention System (BEPS) – The Battery Error Prevention System detects when the batteries become too weak to ensure reliable measurements.
Low Battery Indicator – When the battery level is below 10%, a warning symbol will blink to indicate low battery condition.
HI935002 is supplied with batteries and instructions.
| SKU | HI935002 |
| Name | Dual Channel K-Type Thermocouple Thermometer – HI935002 |
| K-Type Thermocouple Temperature Range | -50.0 to 199.9?C and 200 to 1350?C; -58.0 to 399.9?F and 400 to 2462?F |
| K-Type Thermocouple Temperature Resolution | 0.1?C (-50.0 to 199.9?C) and 1?C (outside); 0.1?F (-58.0 to 399.9?F) and 1?F (outside) |
| K-Type Thermocouple Temperature Accuracy | ?0.2% FS (excluding probe error) |
| Automatic Shut-Off | 8 min (default), 60 min or OFF |
| Battery Type/Life | 1.5V AA (3) / approximately 1600 hours of continuous use |
| Environment | -10 to 50?C (14 to 122?F); RH max 100% |
| Dimensions | 150 x 80 x 36 mm (5.9 x 3.1 x 1.4”) |
| Weight | 235 g (8.3 oz) |
Foodcare K-Type Thermocouple Thermometer with Ultra-Fast Probe - HI9350011
The HI9350011 is a waterproof portable K-Type thermocouple thermometer made for the food professional that is required to monitor temperature as part of a hazardous analysis of critical control points (HACCP) plan including in food service, production, packaging, transportation, restaurants or catering. The HI9350011, as a meter, can measure over a wide range of temperatures from -50.0 ℃ (-58.0 ℉) up to 300 ℃ (572 ℉) and offers a very high accuracy of ±0.4 ℃ (±0.7 ℉). The accuracy of the meter is assured with advanced diagnostic features including CAL-Check that checks for abnormal drift of the internal electronics, battery error prevention system (BEPS) that will not allow a reading to be taken when there is not sufficient battery power and probe diagnostics that alert the user when the probe is not connected or has been damaged.
HI9350011 Foodcare thermometer is supplied with the replaceable FC766C1 K-Type thermocouple probe that will reach 90% of the final reading within 4 seconds. The tip of FC766PW is just 1.6 mm (0.06″) in diameter allowing for easy penetrations into solids and semi-solids. The AISI 316 stainless steel body is 95 mm (3.7″) long and is safe for food contact in compliance with Regulation (EC) 1935/2004.
There are many considerations when designing a thermometer for the food professional. Below are features that we considered to be important and beneficial.
CAL Check
The calibration check (CAL Check) feature of the HI9350011 is an internal diagnostic feature that checks for any drift in the electronics that occurs with all digital thermometers over time. When the meter is turned CAL Check looks to see if the internal calibration is within ±0.3 ℃. If the drift is greater and error (err) message will be displayed. With CAL Check you can be confident that the meter is working properly.
Low Battery Indicator
The included AAA batteries provide 3500 hours of continuous use. When the battery level is below 10%, a warning symbol will blink to indicate low battery condition. When low battery power may affect your results, the meter will shut down to avoid erroneous readings caused by low battery level.
Missing or Damaged Probe Messages
The “NO PROBE” message is displayed on the meter when a thermocouple probe is not attached. If the probe is damaged the message will be displayed along with four blinking dashed lines. For an accurate temperature measurement it is important to know that not only is the meter working properly but that the probe is okay.
Ultra-Fast Response Probe
FC766C1 K-Type thermocouple probe that will reach 90% of the final reading within 4 seconds.
Small Penetration Tip
The tip of FC766C1 is just 1.6 mm (0.06″) in diameter allowing for easy penetrations into solids and semi-solids.
AISI316 Stainless Steel Body
The AISI 316 stainless steel body is 95 mm (3.7″) long and is safe for food contact in compliance with Regulation (EC) 1935/2004.
Additional Features/Benefits:
Supplied with Instrument Quality Certificate
- HI9350011 with the FC766C1 are calibrated according to an ISO9001 calibration system using standards and reference instruments in which the accuracy is traceable the National Institute of Standards (NIST) in the USA, or to internationally acceptable physical standards. For traceability, the HI935001 meter is supplied with an instrument quality certificate including measured values along with reference values.
Large LCD
- An enhanced LCD displays the measurement reading in ℃ or ℉, stability indicator, error messages, and low battery indicator.
Stability Indicator
- An hourglass indicator is displayed on the LCD until a stable reading is obtained. Once a reading stabilizes, the indicator disappears and a reading can be taken.
Automatic Shut-off
- The meter can be set to automatically turn off after 8 minutes or 60 minutes to conserve battery life in the event that the meter is left on. The auto-off feature can also be disabled.
Ergonomic, rugged, waterproof (IP65) design
- For additional protection the HI710027 shockproof rubber boot is available as an accessory.
HI9350011 is supplied with FC766C1 ultra-fast K-Type thermocouple penetration probe, batteries, instruction manual, and instrument quality certificate.
| SKU | HI9350011 |
| Name | Foodcare K-Type Thermocouple Thermometer with Ultra-Fast Probe – HI9350011 |
| K-Type Thermocouple Temperature Range | -50.0 to 199.9 ℃; 200 to 300 ℃ -58.0 to 399.9 °F; 400 to 573 °F |
| K-Type Thermocouple Temperature Resolution | 0.1 ℃ (-50.0 to 199.9 ℃); 1 ℃ (200 to 300 ℃) 0.1 °F (-58.0 to 399.9 °F); 1 oF (400 to 573 °F) |
| K-Type Thermocouple Temperature Accuracy | ? 0.4 ℃ (-50.0 to 300 ℃) ? 0.7°F (-58.0 to 573 °F) |
| Temperature Probe | HI766C1 ultra-fast detachable penetration probe (included) |
| Automatic Shut-Off | user selectable: off, 8 or 60 m in. |
| Battery Type/Life | 1.5V AAA battery (3 pcs.) / approximately 3500 hours of continuous use |
| Environment | operating conditions: -30 to 50?C (-22 to 122?F); storage and transportation: -40 to 70?C (-40 to 158?F); relative humidity: 100% |
| Dimensions | 140 x 57 x 28 mm (5.5 x 2.2 x 1.1”) |
| Weight | 178 g (6.27 oz.) |
Foodcare K-Type Thermocouple Thermometer with Detachable Probe - HI935001
The HI935001 is a waterproof portable K-Type thermocouple thermometer made for the food professional that is required to monitor temperature as part of a hazardous analysis of critical control points (HACCP) plan including in food service, production, packaging, transportation, restaurants or catering. The HI935001, as a meter, can measure over a wide range of temperatures from -50.0 ℃ (-58.0 ℉) up to 300 ℃ (572 ℉) and offers a very high accuracy of ±0.4 ℃ (±0.7 ℉). The accuracy of the meter is assured with advanced diagnostic features including CAL-Check that checks for abnormal drift of the internal electronics, battery error prevention system (BEPS) that will not allow a reading to be taken when there is not sufficient battery power and probe diagnostics that alert the user when the probe is not connected or has been damaged.
HI935001 Foodcare thermometer is supplied with the replaceable FC766PW K-Type thermocouple probe that will reach 90% of the final reading within 15 seconds. The tip of FC766PW is just 3 mm (0.12″) in diameter allowing for easy penetrations into solids and semi-solids. The AISI 316 stainless steel body is 155 mm (6.1″) long and is safe for food contact in compliance with Regulation (EC) 1935/2004.
There are many considerations when designing a thermometer for the food professional. Below are features that we considered to be important and beneficial.
CAL Check
The calibration check (CAL Check) feature of the HI935001 is an internal diagnostic feature that checks for any drift in the electronics that occurs with all digital thermometers over time. When the meter is turned CAL Check looks to see if the internal calibration is within ±0.3 ℃. If the drift is greater and error (err) message will be displayed. With CAL Check you can be confident that the meter is working properly.
Low Battery Indicator
The included AAA batteries provide 3500 hours of continuous use. When the battery level is below 10%, a warning symbol will blink to indicate low battery condition. When low battery power may affect your results, the meter will shut down to avoid erroneous readings caused by low battery level.
Missing or Damaged Probe Messages
The “NO PROBE” message is displayed on the meter when a thermocouple probe is not attached. If the probe is damaged the message will be displayed along with four blinking dashed lines. For an accurate temperature measurement it is important to know that not only is the meter working properly but that the probe is okay.
Fast Response Probe
FC766PW K-Type thermocouple probe that will reach 90% of the final reading within 15 seconds.
Small Penetration Tip
The tip of FC766PW is just 3 mm (0.12″) in diameter allowing for easy penetrations into solids and semi-solids.
AISI316 Stainless Steel Body
The AISI 316 stainless steel body is 155 mm (6.1″) long and is safe for food contact in compliance with Regulation (EC) 1935/2004.
Additional Features/Benefits:
Supplied with Instrument Quality Certificate
- HI935001 with the FC766PW are calibrated according to an ISO9001 calibration system using standards and reference instruments in which the accuracy is traceable the National Institute of Standards (NIST) in the USA, or to internationally acceptable physical standards. For traceability, the HI935001 meter is supplied with an instrument quality certificate including measured values along with reference values.
Large LCD
- An enhanced LCD displays the measurement reading in ℃ or ℉, stability indicator, error messages, and low battery indicator.
Stability Indicator
- An hourglass indicator is displayed on the LCD until a stable reading is obtained. Once a reading stabilizes, the indicator disappears and a reading can be taken.
Automatic Shut-off
- The meter can be set to automatically turn off after 8 minutes or 60 minutes to conserve battery life in the event that the meter is left on. The auto-off feature can also be disabled.
Ergonomic, rugged, waterproof (IP65) design
- For additional protection the HI710027 shockproof rubber boot is available as an accessory.
HI935001 is supplied with FC766PW K-Type thermocouple penetration probe, batteries, instruction manual, and instrument quality certificate.
| SKU | HI935001 |
| Name | Foodcare K-Type Thermocouple Thermometer with Detachable Probe – HI935001 |
| K-Type Thermocouple Temperature Range | -50.0 to 199.9 ℃; 200 to 300 ℃ -58.0 to 399.9 °F; 400 to 572 °F |
| K-Type Thermocouple Temperature Resolution | 0.1 ℃ (-50.0 to 199.9 ℃); 1 ℃ (200 to 300 ℃) 0.1 °F (-58.0 to 399.9 °F); 1 °F (400 to 572 °F) |
| K-Type Thermocouple Temperature Accuracy | ?0.4 ℃ (-50.0 to 300 ℃) ?0.7 °F (-58.0 to 572 °F) |
| Temperature Probe | HI766PW detachable pentration probe (included) |
| Automatic Shut-Off | user selectable: off, 8 or 60 m in. |
| Battery Type/Life | 1.5V AAA battery (3 pcs.) / approximately 3500 hours of continuous use |
| Environment | operating conditions: -30 to 50?C (-22 to 122?F); storage and transportation: -40 to 70?C (-40 to 158?F); relative humidity: 100% |
| Dimensions | 140 x 57 x 28 mm (5.5 x 2.2 x 1.1”) |
| Weight | 178 g (6.27 oz.) |
