FURNACE
SH-FU-3MGE Muffle Furnace Economic 1050 Celsius (3L)
1050℃ economic muffle furnace (3L)
Economic muffle furnace with flap door
– General laboratory use and ashing process
– Recommended ideal running temperature is below 850℃
– Heating from 3 sides
– Excellent outgassing thanks to the exhaust air outlet on the head of chamber, i.e plastic polymer
– Single housing
– Ceramic fiber materials which are not classified as carcinogenic
– Light weight
– Prompt heat up and good maintaining
– SSR operation and PID control provides low noise operation and precise temp control (+/-1℃)
| Model | SH-FU-3MGE |
| Max temperature | 1050℃ |
| Continuous running temperature | 850℃ |
Chamber volume | 3liters |
| Controller | Digital PID controller |
| Sensor | K type |
| Heater | 1.1kW |
| Heating element | KANTAL A-1 with ceramic fiber |
Insulation | Ceramic |
Power supply | 110V, 50/60Hz, 1p, 10A 220V, 50/60Hz, 1p, 5A |
| Net weight | 19kg |
| Chamber size | 130x220x110mm |
| External size | 300x380x410mm |
SH-FU-5MGE Muffle Furnace Economic 1050 Celsius (5L)
1050℃ economic muffle furnace (5L)
– Economic muffle furnace with flap door
– General laboratory use and ashing process
– Recommended ideal running temperature is below 850℃
– Heating from 3 sides
– Excellent outgassing thanks to the exhaust air outlet on the head of chamber, i.e plastic polymer
– Single housing
– Ceramic fiber materials which are not classified as carcinogenic
– Light weight
– Prompt heat up and good maintaining
– SSR operation and PID control provides low noise operation and precise temp control (+/-1℃)
| Model | SH-FU-5MGE |
| Max temperature | 1050℃ |
| Continuous running temperature | 850℃ |
Chamber volume | 5liters |
| Controller | Digital PID controller |
| Sensor | K type |
| Heater | 1.5kW |
| Heating element | KANTAL A-1 with ceramic fiber |
Insulation | Ceramic |
Power supply | 110V, 50/60Hz, 1p, 14A 220V, 50/60Hz, 1p, 7A |
| Net weight | 22kg |
| Chamber size | 150x260x130mm |
| External size | 320x430x430mm |
SH-FU-7MGE Muffle Furnace Economic 1050 Celsius (7L)
1050℃ economic muffle furnace (7L)
– Economic muffle furnace with flap door
– General laboratory use and ashing process
– Recommended ideal running temperature is below 850℃
– Heating from 3 sides
– Excellent outgassing thanks to the exhaust air outlet on the head of chamber, i.e plastic polymer
– Single housing
– Ceramic fiber materials which are not classified as carcinogenic
– Light weight
– Prompt heat up and good maintaining
– SSR operation and PID control provides low noise operation and precise temp control (+/-1℃)
| Model | SH-FU-7MGE |
| Max temperature | 1050℃ |
| Continuous running temperature | 850℃ |
Chamber volume | 7liters |
| Controller | Digital PID controller |
| Sensor | K type |
| Heater | 2.0kW |
| Heating element | KANTAL A-1 with ceramic fiber |
Insulation | Ceramic |
Power supply | 110V, 50/60Hz, 1p, 18A 220V, 50/60Hz, 1p, 9A |
| Net weight | 28kg |
| Chamber size | 170x290x150mm |
| External size | 340x460x450mm |
SH-FU-11MGE Muffle Furnace Economic 1050 Celsius (11L)
1050℃ economic muffle furnace (11L)
– Economic muffle furnace with flap door
– General laboratory use and ashing process
– Recommended ideal running temperature is below 850℃
– Heating from 3 sides
– Excellent outgassing thanks to the exhaust air outlet on the head of chamber, i.e plastic polymer
– Single housing
– Ceramic fiber materials which are not classified as carcinogenic
– Light weight
– Prompt heat up and good maintaining
– SSR operation and PID control provides low noise operation and precise temp control (+/-1℃)
| Model | SH-FU-11MGE |
| Max temperature | 1050℃ |
| Continuous running temperature | 850℃ |
Chamber volume | 7liters |
| Controller | Digital PID controller |
| Sensor | K type |
| Heater | 2.8kW |
| Heating element | KANTAL A-1 with ceramic fiber |
Insulation | Ceramic |
Power supply | 110V, 50/60Hz, 1p, 25A 220V, 50/60Hz, 1p, 13A |
| Net weight | 34kg |
| Chamber size | 200x310x180mm |
| External size | 370x470x480mm |
SH-FU-3MG Muffle Furnace General 1200 Celsius (3L)
1200℃ general muffle furnace (3L)
– General muffle furnace with swing door
– General laboratory use and ashing
– Recommended ideal running temperature is below 1000℃
– Heating from 4 sides and excellent temperature uniformity (+/-2.5%)
– Excellent outgassing thanks to the exhaust air outlet on the head of chamber, i.e plastic polymer
– Double housing and low surface temperature (29~30℃ at 800℃)
– Ceramic fiber materials which are not classified as carcinogenic
– Light weight
– Prompt heat up and good maintaining
– SSR operation and PID control provides low noise operation and precise temp control (+/-1℃)
– Gas atmosphere available with optional flow meter
| Model | SH-FU-3MG |
| Max temperature | 1200℃ |
| Continuous running temperature | 1000℃ |
Chamber volume | 3liters |
| Controller | Digital PID controller |
| Sensor | K type |
| Heater | 1.4kW |
| Heating element | KANTAL A-1 |
Insulation | Ceramic |
Power supply | 110V, 50/60Hz, 1p, 12A 220V, 50/60Hz, 1p, 6A |
| Net weight | 34kg |
| Chamber size | 130x250x90mm |
| External size | 370x510x570mm |
SH-FU-5MG Muffle Furnace General 1200 Celsius (5L)
1200℃ general muffle furnace (5L)
– General muffle furnace with swing door
– General laboratory use and ashing
– Recommended ideal running temperature is below 1000℃
– Heating from 4 sides and excellent temperature uniformity (+/-2.5%)
– Excellent outgassing thanks to the exhaust air outlet on the head of chamber, i.e plastic polymer
– Double housing and low surface temperature (29~30℃ at 800℃)
– Ceramic fiber materials which are not classified as carcinogenic
– Light weight
– Prompt heat up and good maintaining
– SSR operation and PID control provides low noise operation and precise temp control (+/-1℃)
– Gas atmosphere available with optional flow meter
Model | SH-FU-5MG |
Max temperature | 1200℃ |
Continuous running temperature | 1000℃ |
Chamber volume | 5liters |
Controller | Digital PID controller |
Sensor | K type |
Heater | 1.6kW |
Heating element | KANTAL A-1 |
Insulation | Ceramic |
Power supply | 110V, 50/60Hz, 1p, 14A 220V, 50/60Hz, 1p, 7A |
Net weight | 44kg |
Chamber size | 150x300x100mm |
External size | 390x560x580mm |
SH-FU-14MG Muffle Furnace General 1200 Celsius (14L)
1200℃ general muffle furnace (14L)
– General muffle furnace with swing door
– General laboratory use and ashing
– Recommended ideal running temperature is below 1000℃
– Heating from 4 sides and excellent temperature uniformity (+/-2.5%)
– Excellent outgassing thanks to the exhaust air outlet on the head of chamber, i.e plastic polymer
– Double housing and low surface temperature (29~30℃ at 800℃)
– Ceramic fiber materials which are not classified as carcinogenic
– Light weight
– Prompt heat up and good maintaining
– SSR operation and PID control provides low noise operation and precise temp control (+/-1℃)
– Gas atmosphere available with optional flow meter
Model | SH-FU-14MG |
Max temperature | 1200℃ |
Continuous running temperature | 1000℃ |
Chamber volume | 14liters |
Controller | Digital PID controller |
Sensor | K type |
Heater | 4.1kW |
Heating element | KANTAL A-1 |
Insulation | Ceramic |
Power supply | 110V, 50/60Hz, 1p, 34A 220V, 50/60Hz, 1p, 18A |
Net weight | 65kg |
Chamber size | 250x350x160mm |
External size | 500x610x670mm |
SH-FU-27MG 1200℃ general muffle furnace (27L)
1200℃ general muffle furnace (27L)
– General muffle furnace with swing door
– General laboratory use and ashing
– Recommended ideal running temperature is below 1000℃
– Heating from 4 sides and excellent temperature uniformity (+/-2.5%)
– Excellent outgassing thanks to the exhaust air outlet on the head of chamber, i.e plastic polymer
– Double housing and low surface temperature (29~30℃ at 800℃)
– Ceramic fiber materials which are not classified as carcinogenic
– Light weight
– Prompt heat up and good maintaining
– SSR operation and PID control provides low noise operation and precise temp control (+/-1℃)
– Gas atmosphere available with optional flow meter
Model | SH-FU-27MG |
Max temperature | 1200℃ |
Continuous running temperature | 1000℃ |
Chamber volume | 27liters |
Controller | Programmable Controller(SP570) |
Sensor | K type |
Heater | 4.9kW |
Heating element | KANTAL A-1 |
Insulation | Ceramic |
Power supply | 220V, 50/60Hz, 1p, 21A 220V, 50/60Hz, 3p, 13A 380V, 50/60Hz 3p, 8A |
Net weight | 105kg |
Chamber size | 300x300x300mm |
External size | 580x590x840mm |
SH-FU-4MH 1500℃ high temp muffle furnace (4.5L)
1500℃ high temp muffle furnace (4.5L)
– High temperature furnace with SiC Rod heating with swing door
– Great for testing metallic sample
– Built in programmable controller. 5 patterns and 9 segment/pattern. Total 45 segments
– Recommended ideal running temperature is below 1350℃ *24hours continuous running
– Heating from 2 sides and vertical SiC rod preventing warping. Easy replacement
– Excellent outgassing thanks to the exhaust air outlet on the head of chamber, i.e plastic polymer
– Double housing and low surface temperature
– Ceramic fiber materials which are not classified as carcinogenic
– Great temp uniformity (+/-4%)
– Prompt heat up and good maintaining
– SCR operation and programmable control provides low noise operation and precise temp control (+/-1℃)
– Gas atmosphere available with optional flow meter
Model | SH-FU-4MH |
Max temperature | 1500℃ |
Continuous running temperature | 1350℃ |
Chamber volume | 4.5liters |
Controller | Programmable controller |
Sensor | R type |
Heater | 5kW |
Heating element | SiC |
Insulation | Ceramic |
Power supply | 220V, 50/60Hz, 1p, 22A |
Net weight | 92kg |
Chamber size | 150x200x150mm |
External size | 820x560x740mm |
SH-FU-11MH 1500℃ high temp muffle furnace (11L)
1500℃ high temp muffle furnace (11L)
– High temperature furnace with SiC Rod heating with swing door
– Great for testing metallic sample
– Built in programmable controller. 5 patterns and 9 segment/pattern. Total 45 segments
– Recommended ideal running temperature is below 1350℃ *24hours continuous running
– Heating from 2 sides and vertical SiC rod preventing warping. Easy replacement
– Excellent outgassing thanks to the exhaust air outlet on the head of chamber, i.e plastic polymer
– Double housing and low surface temperature
– Ceramic fiber materials which are not classified as carcinogenic
– Great temp uniformity (+/-4%)
– Prompt heat up and good maintaining
– SCR operation and programmable control provides low noise operation and precise temp control (+/-1℃)
– Gas atmosphere available with optional flow meter
Model | SH-FU-11MH |
Max temperature | 1500℃ |
Continuous running temperature | 1350℃ |
Chamber volume | 11liters |
Controller | Programmable controller |
Sensor | R type |
Heater | 7.6kW |
Heating element | SiC |
Insulation | Ceramic |
Power supply | 220V, 50/60Hz, 1p, 33A |
Net weight | 102kg |
Chamber size | 200x270x200mm |
External size | 870x630x790mm |
SH-FU-22MH 1500℃ high temp muffle furnace (22L)
1500℃ high temp muffle furnace (22L)
– High temperature furnace with SiC Rod heating with swing door
– Great for testing metallic sample
– Built in programmable controller. 5 patterns and 9 segment/pattern. Total 45 segments
– Recommended ideal running temperature is below 1350℃ *24hours continuous running
– Heating from 2 sides and vertical SiC rod preventing warping. Easy replacement
– Excellent outgassing thanks to the exhaust air outlet on the head of chamber, i.e plastic polymer
– Double housing and low surface temperature
– Ceramic fiber materials which are not classified as carcinogenic
– Great temp uniformity (+/-4%)
– Prompt heat up and good maintaining
– SCR operation and programmable control provides low noise operation and precise temp control (+/-1℃)
– Gas atmosphere available with optional flow meter
Model | SH-FU-22MH |
Max temperature | 1500℃ |
Continuous running temperature | 1350℃ |
Chamber volume | 22liters |
Controller | Programmable controller |
Sensor | R type |
Heater | 9.6kW |
Heating element | SiC |
Insulation | Ceramic |
Power supply | 220V, 50/60Hz, 1p, 42A |
Net weight | 147kg |
Chamber size | 250x350x250mm |
External size | 920x710x970mm |
SH-FU-36MH 1500℃ high temp muffle furnace (36L)
1500℃ high temp muffle furnace (36L)
– High temperature furnace with SiC Rod heating with swing door
– Great for testing metallic sample
– Built in programmable controller. 5 patterns and 9 segment/pattern. Total 45 segments
– Recommended ideal running temperature is below 1350℃ *24hours continuous running
– Heating from 2 sides and vertical SiC rod preventing warping. Easy replacement
– Excellent outgassing thanks to the exhaust air outlet on the head of chamber, i.e plastic polymer
– Double housing and low surface temperature
– Ceramic fiber materials which are not classified as carcinogenic
– Great temp uniformity (+/-4%)
– Prompt heat up and good maintaining
– SCR operation and programmable control provides low noise operation and precise temp control (+/-1℃)
– Gas atmosphere available with optional flow meter
Model | SH-FU-36MH |
Max temperature | 1500℃ |
Continuous running temperature | 1350℃ |
Chamber volume | 36liters |
Controller | Programmable controller |
Sensor | R type |
Heater | 18kW |
Heating element | SiC |
Insulation | Ceramic |
Power supply | 220V, 50/60Hz, 1p, 48A |
Net weight | 154kg |
Chamber size | 300x300x300mm |
External size | 970x760x920mm |
SH-FU-4MS(1700℃) High-Temperature Furnaces with MoSi2 Rod Heating up to 1700°C (4.5L)
1700℃ high temp muffle furnace (4.5L)
– High-Temperature Furnaces with MoSi2 Rod Heating up to 1700°C
– Great for testing metallic sample and sintering
– Built in programmable controller. 5 patterns and 9 segment/pattern. Total 45 segments
– Recommended ideal running temperature is below 1550℃ *24hours continuous running
– Heating from 2 sides and vertical MoSi2 rod preventing warping. Easy replacement
– Excellent outgassing thanks to the exhaust air outlet on the head of chamber, i.e plastic polymer
– Double housing and low surface temperature
– Ceramic fiber materials which are not classified as carcinogenic
– Great temp uniformity (+/-4%)
– Prompt heat up and good maintaining
– SCR operation and programmable control provides low noise operation and precise temp control (+/-1℃)
– Gas atmosphere available with optional flow meter
Model | SH-FU-4MS(17) |
Max temperature | 1700℃ |
Continuous running temperature | 1550℃ |
Chamber volume | 4.5liters |
Controller | Programmable controller |
Sensor | R type |
Heater | 4.2kW |
Heating element | MoSi2 |
Insulation | Ceramic |
Power supply | 220V, 50/60Hz, 1p, 19A |
Net weight | 150kg |
Chamber size | 150x250x150mm |
External size | 920x600x770mm |
SH-FU-11MS(1700℃) High-Temperature Furnaces with MoSi2 Rod Heating up to 1700°C (11L)
1700℃ high temp muffle furnace (11L)
– High-Temperature Furnaces with MoSi2 Rod Heating up to 1700°C
– Great for testing metallic sample and sintering
– Built in programmable controller. 5 patterns and 9 segment/pattern. Total 45 segments
– Recommended ideal running temperature is below 1550℃ *24hours continuous running
– Heating from 2 sides and vertical MoSi2 rod preventing warping. Easy replacement
– Excellent outgassing thanks to the exhaust air outlet on the head of chamber, i.e plastic polymer
– Double housing and low surface temperature
– Ceramic fiber materials which are not classified as carcinogenic
– Great temp uniformity (+/-4%)
– Prompt heat up and good maintaining
– SCR operation and programmable control provides low noise operation and precise temp control (+/-1℃)
– Gas atmosphere available with optional flow meter
Model | SH-FU-11MS(17) |
Max temperature | 1700℃ |
Continuous running temperature | 1550℃ |
Chamber volume | 11liters |
Controller | Programmable controller |
Sensor | R type |
Heater | 9.2kW |
Heating element | MoSi2 |
Insulation | Ceramic |
Power supply | 220V, 50/60Hz, 1p, 42A |
Net weight | 186kg |
Chamber size | 200x270x200mm |
External size | 1000x670x840mm |
– Gas atmosphere available with optional flow meter
SH-FU-22MS(1700℃) High-Temperature Furnaces with MoSi2 Rod Heating up to 1700°C (22L)
1700℃ high temp muffle furnace (22L)
– High-Temperature Furnaces with MoSi2 Rod Heating up to 1700°C
– Great for testing metallic sample and sintering
– Built in programmable controller. 5 patterns and 9 segment/pattern. Total 45 segments
– Recommended ideal running temperature is below 1550℃ *24hours continuous running
– Heating from 2 sides and vertical MoSi2 rod preventing warping. Easy replacement
– Excellent outgassing thanks to the exhaust air outlet on the head of chamber, i.e plastic polymer
– Double housing and low surface temperature
– Ceramic fiber materials which are not classified as carcinogenic
– Great temp uniformity (+/-4%)
– Prompt heat up and good maintaining
– SCR operation and programmable control provides low noise operation and precise temp control (+/-1℃)
– Gas atmosphere available with optional flow meter
Model | SH-FU-22MS(17) |
Max temperature | 1700℃ |
Continuous running temperature | 1550℃ |
Chamber volume | 22liters |
Controller | Programmable controller |
Sensor | R type |
Heater | 13kW |
Heating element | MoSi2 |
Insulation | Ceramic |
Power supply | 220V, 50/60Hz, 1p, 60A |
Net weight | 210kg |
Chamber size | 250x350x250mm |
External size | 1080x750x910mm |
SH-FU-4MS(1800℃) High-Temperature Furnaces with MoSi2 Rod Heating up to 1800°C (4.5L)
1800℃ high temp muffle furnace (4.5L)
– High-Temperature Furnaces with MoSi2 Rod Heating up to 1800°C
– Great for testing metallic sample and sintering
– Built in programmable controller. 5 patterns and 9 segment/pattern. Total 45 segments
– Recommended ideal running temperature is below 1650℃ *24hours continuous running
– Heating from 2 sides and vertical MoSi2 rod preventing warping. Easy replacement
– Excellent outgassing thanks to the exhaust air outlet on the head of chamber, i.e plastic polymer
– Double housing and low surface temperature
– Ceramic fiber materials which are not classified as carcinogenic
– Great temp uniformity (+/-4%)
– Prompt heat up and good maintaining
– SCR operation and programmable control provides low noise operation and precise temp control (+/-1℃)
– Gas atmosphere available with optional flow meter
Model | SH-FU-4MS(18) |
Max temperature | 1800℃ |
Continuous running temperature | 1650℃ |
Chamber volume | 4.5liters |
Controller | Programmable controller |
Sensor | B type |
Heater | 3kW |
Heating element | MoSi2 |
Insulation | Ceramic |
Power supply | 220V, 50/60Hz, 1p, 14A |
Net weight | 150kg |
Chamber size | 150x250x150mm |
External size | 920x600x770mm |
SH-FU-11MS(1800℃) High-Temperature Furnaces with MoSi2 Rod Heating up to 1800°C (11L)
1800℃ high temp muffle furnace (11L)
– High-Temperature Furnaces with MoSi2 Rod Heating up to 1800°C
– Great for testing metallic sample and sintering
– Built in programmable controller. 5 patterns and 9 segment/pattern. Total 45 segments
– Recommended ideal running temperature is below 1650℃ *24hours continuous running
– Heating from 2 sides and vertical MoSi2 rod preventing warping. Easy replacement
– Excellent outgassing thanks to the exhaust air outlet on the head of chamber, i.e plastic polymer
– Double housing and low surface temperature
– Ceramic fiber materials which are not classified as carcinogenic
– Great temp uniformity (+/-4%)
– Prompt heat up and good maintaining
– SCR operation and programmable control provides low noise operation and precise temp control (+/-1℃)
– Gas atmosphere available with optional flow meter
Model | SH-FU-11MS(18) |
Max temperature | 1800℃ |
Continuous running temperature | 1650℃ |
Chamber volume | 11liters |
Controller | Programmable controller |
Sensor | B type |
Heater | 6.6kW |
Heating element | MoSi2 |
Insulation | Ceramic |
Power supply | 220V, 50/60Hz, 1p, 30A |
Net weight | 186kg |
Chamber size | 200x270x200mm |
External size | 1000x670x840mm |
SH-FU-22MS(1800℃) High-Temperature Furnaces with MoSi2 Rod Heating up to 1800°C (22L)
1800℃ high temp muffle furnace (22L)
– High-Temperature Furnaces with MoSi2 Rod Heating up to 1800°C
– Great for testing metallic sample and sintering
– Built in programmable controller. 5 patterns and 9 segment/pattern. Total 45 segments
– Recommended ideal running temperature is below 1650℃ *24hours continuous running
– Heating from 2 sides and vertical MoSi2 rod preventing warping. Easy replacement
– Excellent outgassing thanks to the exhaust air outlet on the head of chamber, i.e plastic polymer
– Double housing and low surface temperature
– Ceramic fiber materials which are not classified as carcinogenic
– Great temp uniformity (+/-4%)
– Prompt heat up and good maintaining
– SCR operation and programmable control provides low noise operation and precise temp control (+/-1℃)
– Gas atmosphere available with optional flow meter
Model | SH-FU-22MS(18) |
Max temperature | 1800℃ |
Continuous running temperature | 1650℃ |
Chamber volume | 22liters |
Controller | Programmable controller |
Sensor | B type |
Heater | 9.5kW |
Heating element | MoSi2 |
Insulation | Ceramic |
Power supply | 220V, 50/60Hz, 1p, 44A |
Net weight | 210kg |
Chamber size | 250x350x250mm |
External size | 1080x750x910mm |
SH-FU3.5MGU 1200℃ elevator furnace (3.5L)
1200℃ high temp elevator furnace (3.5L)
– General furnace with elevating mechanism
– General laboratory use with user safety
– Elevator furnaces are ideal for reduction, calcination, sintering, application of coatings, and other processes. SH Scientific system provides superior temperature uniformity, boasts energy efficient insulation, and delivers an ultra-pure atmosphere to process materials with minimal gas consumption.
Model
Model | SH-FU-3.5MGU |
Max temperature | 1200℃ |
Continuous running temperature | 1000℃ |
Chamber volume | 3.5liters |
Controller | Digital PID controller |
Sensor | K type |
Heater | 2.2kW |
Heating element | KANTAL A-1 with ceramic fiber |
Insulation | Ceramic |
Power supply | 110V, 50/60Hz, 1p, 20A 220V, 50/60Hz, 1p, 10A |
Net weight | 45kg |
Chamber size | 140x140x180mm |
External size | 410x480x900mm |
SH-FU6.5MGU 1200℃ elevator furnace (6.5L)
1200℃ high temp elevator furnace (6.5L)
– General furnace with elevating mechanism
– General laboratory use with user safety
– Elevator furnaces are ideal for reduction, calcination, sintering, application of coatings, and other processes. SH Scientific system provides superior temperature uniformity, boasts energy efficient insulation, and delivers an ultra-pure atmosphere to process materials with minimal gas consumption.
Model
Model | SH-FU-6.5MGU |
Max temperature | 1200℃ |
Continuous running temperature | 1000℃ |
Chamber volume | 6.5liters |
Controller | Digital PID controller |
Sensor | K type |
Heater | 3kW |
Heating element | KANTAL A-1 with ceramic fiber |
Insulation | Ceramic |
Power supply | 110V, 50/60Hz, 1p, 27A 220V, 50/60Hz, 1p, 14A |
Net weight | 60kg |
Chamber size | 180x180x200mm |
External size | 450x520x920mm |
SH-FU-2MHU 1500℃ high temp elevator furnace (2.2L)
1500℃ high temp elevator furnace (2.2L)
– General furnace with elevating mechanism
– General laboratory use with user safety
– Built in programmable controller. 5 patterns and 9 segment/pattern.
– Elevator furnaces are ideal for reduction, calcination, sintering, application of coatings, and other processes. SH Scientific system provides superior temperature uniformity, boasts energy efficient insulation, and delivers an ultra-pure atmosphere to process materials with minimal gas consumption.
Model | SH-FU-2MHU |
Max temperature | 1500℃ |
Continuous running temperature | 1350℃ |
Chamber volume | 2.2liters |
Controller | Programmable controller |
Sensor | R type |
Heater | 3.5kW |
Heating element | SiC |
Insulation | Ceramic |
Power supply | 220V, 50/60Hz, 1p, 16A |
Net weight | 65kg |
Chamber size | 120x120x150mm |
External size | 420x520x1030mm |
SH-FU-4MHU 1500℃ high temp elevator furnace (3.8L)
1500℃ high temp elevator furnace (3.8L)
– General furnace with elevating mechanism
– General laboratory use with user safety
– Built in programmable controller. 5 patterns and 9 segment/pattern.
– Elevator furnaces are ideal for reduction, calcination, sintering, application of coatings, and other processes. SH Scientific system provides superior temperature uniformity, boasts energy efficient insulation, and delivers an ultra-pure atmosphere to process materials with minimal gas consumption.
Model | SH-FU-4MHU |
Max temperature | 1500℃ |
Continuous running temperature | 1350℃ |
Chamber volume | 3.8liters |
Controller | Programmable controller |
Sensor | R type |
Heater | 5.3kW |
Heating element | SiC |
Insulation | Ceramic |
Power supply | 220V, 50/60Hz, 1p, 124 |
Net weight | 80kg |
Chamber size | 150x150x170mm |
External size | 480x550x1070mm |
boasts energy efficient insulation, and delivers an ultra-pure atmosphere to process materials with minimal gas consumption.
SH-FU-6MHU 1500℃ high temp elevator furnace (6.2L)
1500℃ high temp elevator furnace (6.2L)
– General furnace with elevating mechanism
– General laboratory use with user safety
– Built in programmable controller. 5 patterns and 9 segment/pattern.
– Elevator furnaces are ideal for reduction, calcination, sintering, application of coatings, and other processes. SH Scientific system provides superior temperature uniformity, boasts energy efficient insulation, and delivers an ultra-pure atmosphere to process materials with minimal gas consum
Model | SH-FU-6MHU |
Max temperature | 1500℃ |
Continuous running temperature | 1350℃ |
Chamber volume | 6.2liters |
Controller | Programmable controller |
Sensor | R type |
Heater | 7.7kW |
Heating element | SiC |
Insulation | Ceramic |
Power supply | 220V, 50/60Hz, 1p, 35A |
Net weight | 105kg |
Chamber size | 180x180x190mm |
External size | 510x580x1120mm |
SH-FU-2MSU(1700℃) 1700℃ high temp elevator furnace (2.2L)
1700℃ high temp elevator furnace (2.2L)
– General furnace with elevating mechanism
– General laboratory use with user safety
– Built in programmable controller
– Sintering
– Elevator furnaces are ideal for reduction, calcination, sintering, application of coatings, and other processes. SH Scientific system provides superior temperature uniformity, boasts energy efficient insulation, and delivers an ultra-pure atmosphere to process materials with minimal gas consumption.
Model | SH-FU-2MSU(17) |
Max temperature | 1700℃ |
Continuous running temperature | 1550℃ |
Chamber volume | 2.2liters |
Controller | Programmable controller |
Sensor | R type |
Heater | 2.7kW |
Heating element | MoSi2 |
Insulation | Ceramic |
Power supply | 220V, 50/60Hz, 1p, 12A |
Net weight | 65kg |
Chamber size | 120x120x150mm |
External size | 450x520x1030mm |
SH-FU-4MSU(1700℃) 1700℃ high temp elevator furnace (3.8L)
1700℃ high temp elevator furnace (3.8L)
– General furnace with elevating mechanism
– General laboratory use with user safety
– Built in programmable controller
– Sintering
– Elevator furnaces are ideal for reduction, calcination, sintering, application of coatings, and other processes. SH Scientific system provides superior temperature uniformity, boasts energy efficient insulation, and delivers an ultra-pure atmosphere to process materials with minimal gas consumption.
Model | SH-FU-4MSU(17) |
Max temperature | 1700℃ |
Continuous running temperature | 1550℃ |
Chamber volume | 3.8liters |
Controller | Programmable controller |
Sensor | R type |
Heater | 4.5kW |
Heating element | MoSi2 |
Insulation | Ceramic |
Power supply | 220V, 50/60Hz, 1p, 20A |
Net weight80 | 80kg |
Chamber size | 150x150x170mm |
External size | 480x550x1070mm |
SH-FU-6MSU(1700℃) 1700℃ high temp elevator furnace (6.2L)
1700℃ high temp elevator furnace (6.2L)
– General furnace with elevating mechanism
– General laboratory use with user safety
– Built in programmable controller
– Sintering
– Elevator furnaces are ideal for reduction, calcination, sintering, application of coatings, and other processes. SH Scientific system provides superior temperature uniformity, boasts energy efficient insulation, and delivers an ultra-pure atmosphere to process materials with minimal gas consumption.
Model | SH-FU-6MSU(17) |
Max temperature | 1700℃ |
Continuous running temperature | 1550℃ |
Chamber volume | 6.2liters |
Controller | Programmable controller |
Sensor | R type |
Heater | 6.6kW |
Heating element | MoSi2 |
Insulation | Ceramic |
Power supply | 220V, 50/60Hz, 1p, 30A |
Net weight | 105kg |
Chamber size | 180x180x190mm |
External size | 510x580x1120mm |
SH-FU-2MSU(1800℃) 1800℃ high temp elevator furnace (2.2L)
1800℃ high temp elevator furnace (2.2L)
– General furnace with elevating mechanism
– General laboratory use with user safety
– Built in programmable controller
– Sintering
– Elevator furnaces are ideal for reduction, calcination, sintering, application of coatings, and other processes. SH Scientific system provides superior temperature uniformity, boasts energy efficient insulation, and delivers an ultra-pure atmosphere to process materials with minimal gas consumption.
Model | SH-FU-2MSU(18) |
Max temperature | 1800℃ |
Continuous running temperature | 1650℃ |
Chamber volume | 2.2liters |
Controller | Programmable controller |
Sensor | B type |
Heater | 1.8kW |
Heating element | MoSi2 |
Insulation | Ceramic |
Power supply | 220V, 50/60Hz, 1p, 8A |
Net weight | 65kg |
Chamber size | 120x120x150mm |
External size | 420x520x1030mm |
SH-FU-4MSU(1800℃) 1800℃ high temp elevator furnace (3.8L)
1800℃ high temp elevator furnace (3.8L)
– General furnace with elevating mechanism
– General laboratory use with user safety
– Built in programmable controller
– Sintering
– Elevator furnaces are ideal for reduction, calcination, sintering, application of coatings, and other processes. SH Scientific system provides superior temperature uniformity, boasts energy efficient insulation, and delivers an ultra-pure atmosphere to process materials with minimal gas consumption.
Model | SH-FU-4MSU(18) |
Max temperature | 1800℃ |
Continuous running temperature | 1650℃ |
Chamber volume | 3.8liters |
Controller | Programmable controller |
Sensor | B type |
Heater | 3kW |
Heating element | MoSi2 |
Insulation | Ceramic |
Power supply | 220V, 50/60Hz, 1p, 14A |
Net weight | 80kg |
Chamber size | 150x150x170mm |
External size | 480x550x1070mm |
SH-FU-100LTG(600mm Length Hot Zone)
1200℃ tube furnace (100mm diameter tube and 600mm hot zone)
– General tube furnace with hinged door
– Double housing and low surface temperature (29~30℃ at 800℃)
– Recommended ideal running temperature is below 1000℃
– Great durability thanks to Kanthal heating element
– Suitable for gas exchange experiment
– Light weight and prompt heat up thanks to ceramic insulation
– Convenient design for sample loading
– Built in programmable controller. 5 patterns and 9 segment/pattern. Total 45 segments
– Built in over temp protector
– SSR operation and built in programmable controller provides low noise operation and precise temp control (+/-1℃)
– Wide choice of applicable tube sizes and heating length. 50/80/100/120mm diameter and 300/600mm heating zone
– Wide choice of tube materials. Quartz, ceramic, alumina and alloy
Model | SH-FU-100LTG |
Max temperature | 1200℃ |
Continuous running temperature | 1000℃ |
Tube diameter | 100mm |
Controller | Programmable controller |
Sensor | K type |
Heater | 3.2kW |
Hot zone | 600mm |
Heating element | Kantal with ceramic molding |
Insulation | Ceramic |
External size | 810x400x560mm |
Weight | 68kg |
Power supply | 220V, 50/60Hz, 1p, 27A 220V, 50/60Hz, 3p, 15A 380V, 50/60Hz, 3p, 9A |
SH-FU-80LTG(600mm Length Hot Zone)
1200℃ tube furnace (80mm diameter tube and 600mm hot zone)
– General tube furnace with hinged door
– Double housing and low surface temperature (29~30℃ at 800℃)
– Recommended ideal running temperature is below 1000℃
– Great durability thanks to Kanthal heating element
– Suitable for gas exchange experiment
– Light weight and prompt heat up thanks to ceramic insulation
– Convenient design for sample loading
– Built in programmable controller. 5 patterns and 9 segment/pattern. Total 45 segments
– Built in over temp protector
– SSR operation and built in programmable controller provides low noise operation and precise temp control (+/-1℃)
– Wide choice of applicable tube sizes and heating length. 50/80/100/120mm diameter and 300/600mm heating zone
– Wide choice of tube materials. Quartz, ceramic, alumina and alloy
Model | SH-FU-80LTG |
Max temperature | 1200℃ |
Continuous running temperature | 1000℃ |
Tube diameter | 80mm |
Controller | Programmable controller |
Sensor | K type |
Heater | 2.5kW |
Hot zone | 600mm |
Heating element | Kantal with ceramic molding |
Insulation | Ceramic |
External size | 810x760x540mm |
Weight | 56kg |
Power supply | 110V, 50/60Hz, 1p, 40A 220V, 50/60Hz, 1p, 20A |
SH-FU-50LTG(600mm Length Hot Zone)
1200℃ tube furnace (50mm diameter tube and 600mm hot zone)
– General tube furnace with hinged door
– Double housing and low surface temperature (29~30℃ at 800℃)
– Recommended ideal running temperature is below 1000℃
– Great durability thanks to Kanthal heating element
– Suitable for gas exchange experiment
– Light weight and prompt heat up thanks to ceramic insulation
– Convenient design for sample loading
– Built in programmable controller. 5 patterns and 9 segment/pattern. Total 45 segments
– Built in over temp protector
– SSR operation and built in programmable controller provides low noise operation and precise temp control (+/-1℃)
– Wide choice of applicable tube sizes and heating length. 50/80/100/120mm diameter and 300/600mm heating zone
– Wide choice of tube materials. Quartz, ceramic, alumina and alloy
Model | SH-FU-50LTG |
Max temperature | 1200℃ |
Continuous running temperature | 1000℃ |
Tube diameter | 50mm |
Controller | Programmable controller |
Sensor | K type |
Heater | 2kW |
Hot zone | 600mm |
Heating element | Kantal with ceramic molding |
Insulation | Ceramic |
External size | 800x360x520mm |
Weight | 52kg |
Power supply | 110V, 50/60Hz, 1p, 33A 220V, 50/60Hz, 1p, 16A |
SH-FU-120STG(300mm Length Hot Zone
1200℃ tube furnace (120mm diameter tube and 300mm hot zone)
– General tube furnace with hinged door
– Double housing and low surface temperature (29~30℃ at 800℃)
– Recommended ideal running temperature is below 1000℃
– Great durability thanks to Kanthal heating element
– Suitable for gas exchange experiment
– Light weight and prompt heat up thanks to ceramic insulation
– Convenient design for sample loading
– Built in programmable controller. 5 patterns and 9 segment/pattern. Total 45 segments
– Built in over temp protector
– SSR operation and built in programmable controller provides low noise operation and precise temp control (+/-1℃)
– Wide choice of applicable tube sizes and heating length. 50/80/100/120mm diameter and 300/600mm heating zone
– Wide choice of tube materials. Quartz, ceramic, alumina and alloy
Model | SH-FU-120STG |
Max temperature | 1200℃ |
Continuous running temperature | 1000℃ |
Tube diameter | 120mm |
Controller | Programmable controller |
Sensor | K type |
Heater | 3.6kW |
Hot zone | 300mm |
Heating element | Kantal with ceramic molding |
Insulation | Ceramic |
External size | 500x460x630mm |
Weight | 70kg |
Power supply | 110V, 50/60Hz, 1p, 33A 220V, 50/60Hz, 1p, 16A |
SH-FU-100STG(300mm Length Hot Zone)
1200℃ tube furnace (100mm diameter tube and 300mm hot zone)
– General tube furnace with hinged door
– Double housing and low surface temperature (29~30℃ at 800℃)
– Recommended ideal running temperature is below 1000℃
– Great durability thanks to Kanthal heating element
– Suitable for gas exchange experiment
– Light weight and prompt heat up thanks to ceramic insulation
– Convenient design for sample loading
– Built in programmable controller. 5 patterns and 9 segment/pattern. Total 45 segments
– Built in over temp protector
– SSR operation and built in programmable controller provides low noise operation and precise temp control (+/-1℃)
– Wide choice of applicable tube sizes and heating length. 50/80/100/120mm diameter and 300/600mm heating zone
– Wide choice of tube materials. Quartz, ceramic, alumina and alloy
Model | SH-FU-100STG |
Max temperature | 1200℃ |
Continuous running temperature | 1000℃ |
Tube diameter | 100mm |
Controller | Programmable controller |
Sensor | K type |
Heater | 3.2kW |
Hot zone | 300mm |
Heating element | Kantal with ceramic molding |
Insulation | Ceramic |
External size | 500x400x560mm |
Weight | 48kg |
Power supply | 110V, 50/60Hz, 1p, 28A 220V, 50/60Hz, 1p, 15A |
SH-FU-80STG(300mm Length Hot Zone)
1200℃ tube furnace (80mm diameter tube and 300mm hot zone)
– General tube furnace with hinged door
– Double housing and low surface temperature (29~30℃ at 800℃)
– Recommended ideal running temperature is below 1000℃
– Great durability thanks to Kanthal heating element
– Suitable for gas exchange experiment
– Light weight and prompt heat up thanks to ceramic insulation
– Convenient design for sample loading
– Built in programmable controller. 5 patterns and 9 segment/pattern. Total 45 segments
– Built in over temp protector
– SSR operation and built in programmable controller provides low noise operation and precise temp control (+/-1℃)
– Wide choice of applicable tube sizes and heating length. 50/80/100/120mm diameter and 300/600mm heating zone
– Wide choice of tube materials. Quartz, ceramic, alumina and alloy
Model | SH-FU-80STG |
Max temperature | 1200℃ |
Continuous running temperature | 1000℃ |
Tube diameter | 80mm |
Controller | Programmable controller |
Sensor | K type |
Heater | 2.5kW |
Hot zone | 300mm |
Heating element | Kantal with ceramic molding |
Insulation | Ceramic |
External size | 500x370x540mm |
Weight | 32kg |
Power supply | 110V, 50/60Hz, 1p, 22A 220V, 50/60Hz, 1p, 11A |
SH-FU-50STG(300mm Length Hot Zone)
1200℃ tube furnace (50mm diameter tube and 300mm hot zone)
– General tube furnace with hinged door
– Double housing and low surface temperature (29~30℃ at 800℃)
– Recommended ideal running temperature is below 1000℃
– Great durability thanks to Kanthal heating element
– Suitable for gas exchange experiment
– Light weight and prompt heat up thanks to ceramic insulation
– Convenient design for sample loading
– Built in programmable controller. 5 patterns and 9 segment/pattern. Total 45 segments
– Built in over temp protector
– SSR operation and built in programmable controller provides low noise operation and precise temp control (+/-1℃)
– Wide choice of applicable tube sizes and heating length. 50/80/100/120mm diameter and 300/600mm heating zone
– Wide choice of tube materials. Quartz, ceramic, alumina and alloy
Model | SH-FU-50STG |
Max temperature | 1200℃ |
Continuous running temperature | 1000℃ |
Tube diameter | 50mm |
Controller | Programmable controller |
Sensor | K type |
Heater | 2kW |
Hot zone | 300mm |
Heating element | Kantal with ceramic molding |
Insulation | Ceramic |
External size | I500x360x520mm |
Weight | 27kg |
Power supply | 110V, 50/60Hz, 1p, 18A 220V, 50/60Hz, 1p, 9A |
SH-FU-6MSU 1800℃ high temp elevator furnace (6.2L)
1800℃ high temp elevator furnace (6.2L)
– General furnace with elevating mechanism
– General laboratory use with user safety
– Built in programmable controller
– Sintering
– Elevator furnaces are ideal for reduction, calcination, sintering, application of coatings, and other processes. SH Scientific system provides superior temperature uniformity, boasts energy efficient insulation, and delivers an ultra-pure atmosphere to process materials with minimal gas consumption.
Model | SH-FU-6MSU(18) |
Max temperature | 1800℃ |
Continuous running temperature | 1650℃ |
Chamber volume | 6.2liters |
Controller | Programmable controller |
Sensor | B type |
Heater | 4.8kW |
Heating element | MoSi2 |
Insulation | Ceramic |
Power supply | 220V, 50/60Hz, 1p, 22A |
Net weight | 105kg |
Chamber size | 180x180x190mm |
External size | 510x580x1120mm |
SH-FU-1.5MGV
1200°C Muffle Furnace with Vacuum
– Recommended ideal running temperature is below 1000°C
– Complete atmospheric control for non-oxidation environment
– Creating multiple atmospheric enviroment (burning in air, purging air and pulling vacuum, flowing inert gas and sintering)
– No limitation on samples sizes due to squre inner chamber compared to the ones with tube furnace
– Supporting hardening, annealing, tempering, brazing and sintering with or without vacuum.
– Consist of individual 4 port for vacuum, vacuum release, gas in and gas out
– An optional MFC(Mass Flow Controller) for precise, responsive and stable gas management across 98 inert gas presets
– An Optional BPR(Back Pressure Regulator) to maintain positive pressure inside the chamber
– Offering full configration with vacuum pump, MFC, BPR, Digital vacuum meter as optional for perfect & precise experiment.
| Model | SH-FU-1.5MGV |
| Max Temp | 1200℃ (2192℉) |
| Temp Controller | Programmable Controller(SP590) |
Heater Capa | 1100 W |
| Capa | 1.5L |
| Dimension Internal (W×D×H) | 115x115x115mm 4.53×4.53×4.53” |
| Dimension External (W×D×H) | 740x610x590 mm 29.13×24.01×23.23” |
| Material External | Steel Plate with powder heating coated |
Heater Element | KANTHAL A-1 (Ceramic heating) |
Insulation | Ceramic Board & Wool (Ceramic fiber) |
| Electrical Requirements 120V, 50/60Hz, 1Φ | 9.2 A |
| Cat. No. | FU1.5MGV230 |
| Electrical Requirements 230V, 50/60Hz, 3Φ | N/A |
| Cat. No. | |
| Electrical Requirements 380V, 50/60Hz, 3Φ | N/A |
| Cat. No. |
Option
-Hybrid recorder
-MFC, BPR
SH-FU-31MGV
1200°C Muffle Furnace with Vacuum
– Recommended ideal running temperature is below 1000°C
– Complete atmospheric control for non-oxidation environment
– Creating multiple atmospheric enviroment (burning in air, purging air and pulling vacuum, flowing inert gas and sintering)
– No limitation on samples sizes due to squre inner chamber compared to the ones with tube furnace
– Supporting hardening, annealing, tempering, brazing and sintering with or without vacuum.
– Consist of individual 4 port for vacuum, vacuum release, gas in and gas out
– An optional MFC(Mass Flow Controller) for precise, responsive and stable gas management across 98 inert gas presets
– An Optional BPR(Back Pressure Regulator) to maintain positive pressure inside the chamber
– Offering full configration with vacuum pump, MFC, BPR, Digital vacuum meter as optional for perfect & precise experiment.
| Model | SH-FU-31MGV |
| Max Temp | 1200℃ (2192℉) |
| Temp Controller | Programmable Controller(SP590) |
Heater Capa | 6100 W |
| Capa | 31L |
| Dimension Internal (W×D×H) | 315x315x315mm 12.40×12.40×12.40” |
| Dimension External (W×D×H) | 940x710x820mm 37.01×27.95×32.28” |
| Material External | Steel Plate with powder heating coated |
Heater Element | KANTHAL A-1 (Ceramic heating) |
Insulation | Ceramic Board & Wool (Ceramic fiber) |
| Electrical Requirements 120V, 50/60Hz, 1Φ | N/A |
| Cat. No. | |
| Electrical Requirements 230V, 50/60Hz, 1Φ | 26.5 A |
| Cat. No. | FU31MGV230 |
| Electrical Requirements 230V, 50/60Hz, 3Φ | 15.1 A
|
| Cat. No. | FU31MGV230-3 |
| Electrical Requirements 380V, 50/60Hz, 3Φ | 9.1 A
|
| Cat. No. | FU31MGV380-3 |
SH-FU-10MGV
1200°C Muffle Furnace with Vacuum
– Recommended ideal running temperature is below 1000°C
– Complete atmospheric control for non-oxidation environment
– Creating multiple atmospheric enviroment (burning in air, purging air and pulling vacuum, flowing inert gas and sintering)
– No limitation on samples sizes due to squre inner chamber compared to the ones with tube furnace
– Supporting hardening, annealing, tempering, brazing and sintering with or without vacuum.
– Consist of individual 4 port for vacuum, vacuum release, gas in and gas out
– An optional MFC(Mass Flow Controller) for precise, responsive and stable gas management across 98 inert gas presets
– An Optional BPR(Back Pressure Regulator) to maintain positive pressure inside the chamber
– Offering full configration with vacuum pump, MFC, BPR, Digital vacuum meter as optional for perfect & precise experiment.
| Model | SH-FU-10MGV |
| Max Temp | 1200℃ (2192℉) |
| Temp Controller | Programmable Controller(SP590) |
Heater Capa | 3200 W |
| Capa | 10L |
| Dimension Internal (W×D×H) | 215x215x215mm 8.46×8.46×8.46” |
| Dimension External (W×D×H) | 840x610x700mm 33.07×24.01×27.56” |
| Material External | Steel Plate with powder heating coated |
Heater Element | KANTHAL A-1 (Ceramic heating) |
Insulation | Ceramic Board & Wool (Ceramic fiber) |
| Electrical Requirements 120V, 50/60Hz, 1Φ | N/A |
| Cat. No. | |
| Electrical Requirements 230V, 50/60Hz, 1Φ | 13.91A |
| Cat. No. | FU10MGV230 |
| Electrical Requirements 230V, 50/60Hz, 3Φ | N/A |
| Cat. No. | |
| Electrical Requirements 380V, 50/60Hz, 3Φ | N/A |
| Cat. No. |
SH-FU-31MGV 1200°C Muffle Furnace with Vacuum (31L)
1200°C Muffle Furnace with Vacuum
– Recommended ideal running temperature is below 1000°C
– Complete atmospheric control for non-oxidation environment
– Creating multiple atmospheric enviroment (burning in air, purging air and pulling vacuum, flowing inert gas and sintering)
– No limitation on samples sizes due to squre inner chamber compared to the ones with tube furnace
– Supporting hardening, annealing, tempering, brazing and sintering with or without vacuum.
– Consist of individual 4 port for vacuum, vacuum release, gas in and gas out
– An optional MFC(Mass Flow Controller) for precise, responsive and stable gas management across 98 inert gas presets
– An Optional BPR(Back Pressure Regulator) to maintain positive pressure inside the chamber
– Offering full configration with vacuum pump, MFC, BPR, Digital vacuum meter as optional for perfect & precise experiment.
SH-FU-4.5MHV 1500°C Muffle Furnace with Vacuum (4.5L)
1500°C Muffle Furnace with Vacuum
– Suitable for running atmosphere temperature below 1350℃
– Gas input after reaching vacuum condition in the rectangular inner chamber (Optimized for anoxic atmosphere)
– Consisted of individual 4 port for vacuum, vacuum release, gas in and gas out
– Mass gas Flow Controller (MFC) system installation (option)
– Back Pressure Regulator (BPR) system installation (option)
– Offering Full Package consist of Vacuum Pump, MFC, BPR, Digital Vacuummeter (option)
| Model | SH-FU-4.5MHV |
| Max Temp | 1500℃ (2732℉) |
| Temp Controller | Programmable Controller(SP590) |
| Sensor | R type |
Heater Capa | 3300 W |
| Capa | 4.5 L |
| Dimension Internal (W×D×H) | 150x200x150mm 5.91×7.87×5.91” |
| Dimension External (W×D×H) | 630x590x830mm 24.80×23.23×32.68” |
| Material External | Steel Plate with powder heating coated |
Heater Element | SIC |
Insulation | Ceramic Board & Wool (Ceramic fiber) |
| Electrical Requirements 230V ,50/60Hz, 1Φ | 14.4A
|
| Cat. No. | FU4.5MHV230 |
| Electrical Requirements 380V ,50/60Hz, 3Φ | N/A
|
| Cat. No. |
SH-FU-18.7MHV 1500°C Muffle Furnace with Vacuum (18.7L)
1500°C Muffle Furnace with Vacuum
– Suitable for running atmosphere temperature below 1350℃
– Gas input after reaching vacuum condition in the rectangular inner chamber (Optimized for anoxic atmosphere)
– Consisted of individual 4 port for vacuum, vacuum release, gas in and gas out
– Mass gas Flow Controller (MFC) system installation (option)
– Back Pressure Regulator (BPR) system installation (option)
– Offering Full Package consist of Vacuum Pump, MFC, BPR, Digital Vacuummeter (option)
| Model | SH-FU-18.7MHV |
| Max Temp | 1500℃ (2732℉) |
| Temp Controller | Programmable Controller(SP590) |
| Sensor | R type |
Heater Capa | 10000 W |
| Capa | 18.7 L |
| Dimension Internal (W×D×H) | 250x300x250mm 9.84×11.81×9.84” |
| Dimension External (W×D×H) | 1050X900X940mm 41.33×35.43×37.00” |
| Material External | Steel Plate with powder heating coated |
Heater Element | SIC |
Insulation | Ceramic Board & Wool (Ceramic fiber) |
| Electrical Requirements 230V ,50/60Hz, 1Φ | N/A
|
| Cat. No. | |
| Electrical Requirements 380V ,50/60Hz, 3Φ | 15.2A
|
| Cat. No. | FU18.7MHV380-3 |
SH-FU-1.5MGVQ (1200°C Muffle Furnace with Quartz Chamber)
- Recommended ideal running temperature is below 1000°C
- Complete atmospheric control for non-oxidation environment
- Creating multiple atmospheric enviroment (burning in air, purging air and pulling vacuum, flowing inert gas and sintering)
- No limitation on samples sizes due to squre inner chamber compared to the ones with tube furnace
- Supporting hardening, annealing, tempering, brazing and sintering with or without vacuum.
- Ensuring non-contaminating clean room condition for delicate samples by the inner quartz chamber (including door back side)
- Maximize sample purity and heating element longevity by the inner quartz chamber
- Easy to clean the inner quartz chamber after experiment
- Consist of individual 4 port for vacuum, vacuum release, gas in and gas out covered with quartz
- An optional MFC(Mass Flow Controller) for precise, responsive and stable gas management across 98 inert gas presets
- An Optional BPR(Back Pressure Regulator) to maintain positive pressure inside the chamber
- Offering full configration with vacuum pump, MFC, BPR, Digital vacuummeter as optional for perfect & precise experiment.
| Model | SH-FU-1.5MGVQ |
|---|---|
| Max Temp | 1200℃ (2192℉) |
| Temp Controller | Programmable Controller(SP590) |
| Heater Capa | 1100 W |
| Capa | 1.5L |
| Dimension Internal (W×D×H) | (Quartz Chamber 3T) 109x109x109mm 4.29×4.29×4.29” |
| Dimension External (W×D×H) | 740x610x590 mm 29.13×24.01×23.23” |
| Material External | Steel Plate with powder heating coated |
| Heater Element | KANTHAL A-1 (Ceramic heating) |
| Insulation | Ceramic Board & Wool (Ceramic fiber) |
| Electrical Requirements 120V, 50/60Hz, 1Φ | 9.2 A |
| Cat. No. | FU1.5MGV120 |
| Electrical Requirements 230V, 50/60Hz, 1Φ | 4.8A |
| Cat. No. | FU1.5MGV230 |
| Electrical Requirements 230V, 50/60Hz, 3Φ | N/A |
| Cat. No. | |
| Electrical Requirements 380V, 50/60Hz, 3Φ | N/A |
| Cat. No. |
- • Option
- -Hybrid recorder
- -MFC, BPR
- • Safety Device
- -Automatic reset function incoming power cut
- -Buzzer on when set time arrived
- -Over temperature alarm
SH-FU-10MGVQ (1200°C Muffle Furnace with Quartz Chamber)
- Recommended ideal running temperature is below 1000°C
- Complete atmospheric control for non-oxidation environment
- Creating multiple atmospheric enviroment (burning in air, purging air and pulling vacuum, flowing inert gas and sintering)
- No limitation on samples sizes due to squre inner chamber compared to the ones with tube furnace
- Supporting hardening, annealing, tempering, brazing and sintering with or without vacuum.
- Ensuring non-contaminating clean room condition for delicate samples by the inner quartz chamber (including door back side)
- Maximize sample purity and heating element longevity by the inner quartz chamber
- Easy to clean the inner quartz chamber after experiment
- Consist of individual 4 port for vacuum, vacuum release, gas in and gas out covered with quartz
- An optional MFC(Mass Flow Controller) for precise, responsive and stable gas management across 98 inert gas presets
- An Optional BPR(Back Pressure Regulator) to maintain positive pressure inside the chamber
- Offering full configration with vacuum pump, MFC, BPR, Digital vacuummeter as optional for perfect & precise experiment.
| Model | SH-FU-10MGVQ |
|---|---|
| Max Temp | 1200℃ (2192℉) |
| Temp Controller | Programmable Controller(SP590) |
| Heater Capa | 3200 W |
| Capa | 10L |
| Dimension Internal (W×D×H) | (Quartz Chamber 5T) 205x205x205mm 8.07×8.07×8.07” |
| Dimension External (W×D×H) | 840x610x700mm 33.07×24.01×27.56” |
| Material External | Steel Plate with powder heating coated |
| Heater Element | KANTHAL A-1 (Ceramic heating) |
| Insulation | Ceramic Board & Wool (Ceramic fiber) |
| Electrical Requirements 120V, 50/60Hz, 1Φ | N/A |
| Cat. No. | |
| Electrical Requirements 230V, 50/60Hz, 1Φ | 13.91A |
| Cat. No. | FU10MGV230 |
| Electrical Requirements 230V, 50/60Hz, 3Φ | N/A |
| Cat. No. | |
| Electrical Requirements 380V, 50/60Hz, 3Φ | N/A |
| Cat. No. |
- • Option
- -Hybrid recorder
- -MFC, BPR
- • Safety Device
- -Automatic reset function incoming power cut
- -Buzzer on when set time arrived
- -Over temperature alarm
SH-FU-31MGVQ (1200°C Muffle Furnace with Quartz Chamber)
- Recommended ideal running temperature is below 1000°C
- Complete atmospheric control for non-oxidation environment
- Creating multiple atmospheric enviroment (burning in air, purging air and pulling vacuum, flowing inert gas and sintering)
- No limitation on samples sizes due to squre inner chamber compared to the ones with tube furnace
- Supporting hardening, annealing, tempering, brazing and sintering with or without vacuum.
- Ensuring non-contaminating clean room condition for delicate samples by the inner quartz chamber (including door back side)
- Maximize sample purity and heating element longevity by the inner quartz chamber
- Easy to clean the inner quartz chamber after experiment
- Consist of individual 4 port for vacuum, vacuum release, gas in and gas out covered with quartz
- An optional MFC(Mass Flow Controller) for precise, responsive and stable gas management across 98 inert gas presets
- An Optional BPR(Back Pressure Regulator) to maintain positive pressure inside the chamber
- Offering full configration with vacuum pump, MFC, BPR, Digital vacuummeter as optional for perfect & precise experiment.
| Model | SH-FU-31MGVQ |
|---|---|
| Max Temp | 1200℃ (2192℉) |
| Temp Controller | Programmable Controller(SP590) |
| Heater Capa | 6100 W |
| Capa | 31L |
| Dimension Internal (W×D×H) | (Quartz Chamber 5T) 305x305x305mm 12.00×12.00×12.00” |
| Dimension External (W×D×H) | 940x710x820mm 37.01×27.95×32.28” |
| Material External | Steel Plate with powder heating coated |
| Heater Element | KANTHAL A-1 (Ceramic heating) |
| Insulation | Ceramic Board & Wool (Ceramic fiber) |
| Electrical Requirements 120V, 50/60Hz, 1Φ | N/A |
| Cat. No. | |
| Electrical Requirements 230V, 50/60Hz, 1Φ | 26.5 A |
| Cat. No. | FU31MGV230 |
| Electrical Requirements 230V, 50/60Hz, 3Φ | 15.1 A |
| Cat. No. | FU31MGV230-3 |
| Electrical Requirements 380V, 50/60Hz, 3Φ | 9.1 A |
| Cat. No. | FU31MGV380-3 |
- • Option
- -Hybrid recorder
- -MFC, BPR
- • Safety Device
- -Automatic reset function incoming power cut
- -Buzzer on when set time arrived
- -Over temperature alarm
SH-FU-120LTG(600mm Length Hot Zone)
1200℃ tube furnace (120mm diameter tube and 600mm hot zone)
– General tube furnace with hinged door
– Double housing and low surface temperature (29~30℃ at 800℃)
– Recommended ideal running temperature is below 1000℃
– Great durability thanks to Kantal heating element
– Suitable for gas exchange experiment
– Light weight and prompt heat up thanks to ceramic insulation
– Convenient design for sample loading
– Built in programmable controller. 5 patterns and 9 segment/pattern. Total 45 segments
– Built in over temp protector
– SSR operation and built in programmable controller provides low noise operation and precise temp control (+/-1℃)
– Wide choice of applicable tube sizes and heating length. 50/80/100/120mm diameter and 300/600mm heating zone
– Wide choice of tube materials. Quartz, ceramic, alumina and alloy
Model | SH-FU-120LTG |
Max temperature | 1200℃ |
Continuous running temperature | 1000℃ |
Tube diameter | 120mm |
Controller | Programmable controller |
Sensor | K type |
Heater | 3.6kW |
Hot zone | 600mm |
Heating element | Kantal with ceramic molding |
Insulation | Ceramic |
External size | 810x460x630mm |
Weight | 105kg |
Power supply | 220V, 50/60Hz, 1p, 33A 220V, 50/60Hz, 3p, 18A 380V, 50/60Hz, 3p, 11A |
SH-FU-50TH (50mm diameter tube and 300mm hot zone)
1500℃ high temp tube furnace (50mm diameter tube and 300mm hot zone)
– High temp tube furnace with hinged door
– Double housing and low surface temperature
– Recommended ideal running temperature is below 1350℃
– Great durability thanks to SIC heating element and easy replacement
– R type thermocouple
– Suitable for gas exchange experiment
– Light weight and prompt heat up thanks to ceramic insulation
– Convenient design for sample loading
– Built in programmable controller. 5 patterns and 9 segment/pattern. Total 45 segments
– Built in over temp protector
– SCR operation and built in programmable controller provides low noise operation and precise temp control (+/-1℃)
– Wide choice of applicable tube sizes. 50/80/100/120mm diameter.
– Wide choice of tube materials. Quartz, ceramic, alumina and alloy
Model | SH-FU-50TH |
Max temperature | 1500℃ |
Continuous running temperature | 1350℃ |
Tube diameter | 50mm |
Controller | Programmable controller |
Sensor | R type |
Heater | 5kW |
Hot zone | 300mm |
Heating element | SiC |
Insulation | Ceramic |
External size | 690x490x580mm |
Weight | 67kg |
Power supply | 220V, 50/60Hz, 1p, 23A |
SH-FU-80TH (80mm diameter tube and 300mm hot zone)
1500℃ high temp tube furnace (80mm diameter tube and 300mm hot zone)
– High temp tube furnace with hinged door
– Double housing and low surface temperature
– Recommended ideal running temperature is below 1350℃
– Great durability thanks to SIC heating element and easy replacement
– R type thermocouple
– Suitable for gas exchange experiment
– Light weight and prompt heat up thanks to ceramic insulation
– Convenient design for sample loading
– Built in programmable controller. 5 patterns and 9 segment/pattern. Total 45 segments
– Built in over temp protector
– SCR operation and built in programmable controller provides low noise operation and precise temp control (+/-1℃)
– Wide choice of applicable tube sizes. 50/80/100/120mm diameter.
– Wide choice of tube materials. Quartz, ceramic, alumina and alloy
Model | SH-FU-80TH |
Max temperature | 1500℃ |
Continuous running temperature | 1350℃ |
Tube diameter | 80mm |
Controller | Programmable controller |
Sensor | R type |
Heater | 7kW |
Hot zone | 300mm |
Heating element | SiC |
Insulation | Ceramic |
External size | 690x520x610mm |
Weight | 72kg |
Power supply | 220V, 50/60Hz, 1p, 32A |
SH-FU-100TH (100mm diameter tube and 300mm hot zone)
1500℃ high temp tube furnace (100mm diameter tube and 300mm hot zone)
– High temp tube furnace with hinged door
– Double housing and low surface temperature
– Recommended ideal running temperature is below 1350℃
– Great durability thanks to SIC heating element and easy replacement
– R type thermocouple
– Suitable for gas exchange experiment
– Light weight and prompt heat up thanks to ceramic insulation
– Convenient design for sample loading
– Built in programmable controller. 5 patterns and 9 segment/pattern. Total 45 segments
– Built in over temp protector
– SCR operation and built in programmable controller provides low noise operation and precise temp control (+/-1℃)
– Wide choice of applicable tube sizes. 50/80/100/120mm diameter.
– Wide choice of tube materials. Quartz, ceramic, alumina and alloy
Model | SH-FU-100TH |
Max temperature | 1500℃ |
Continuous running temperature | 1350℃ |
Tube diameter | 100mm |
Controller | Programmable controller |
Sensor | R type |
Heater | 13kW |
Hot zone | 300mm |
Heating element | SiC |
Insulation | Ceramic |
External size | 690x550x640mm |
Weight | 114kg |
Power supply | 220V, 50/60Hz, 1p, 60A |
SH-FU-120TH (120mm diameter tube and 300mm hot zone)
1500℃ high temp tube furnace (50mm diameter tube and 300mm hot zone)
– High temp tube furnace with hinged door
– Double housing and low surface temperature
– Recommended ideal running temperature is below 1350℃
– Great durability thanks to SIC heating element and easy replacement
– R type thermocouple
– Suitable for gas exchange experiment
– Light weight and prompt heat up thanks to ceramic insulation
– Convenient design for sample loading
– Built in programmable controller. 5 patterns and 9 segment/pattern. Total 45 segments
– Built in over temp protector
– SCR operation and built in programmable controller provides low noise operation and precise temp control (+/-1℃)
– Wide choice of applicable tube sizes. 50/80/100/120mm diameter.
– Wide choice of tube materials. Quartz, ceramic, alumina and alloy
Model | SH-FU-120TH |
Max temperature | 1500℃ |
Continuous running temperature | 1350℃ |
Tube diameter | 120mm |
Controller | Programmable controller |
Sensor | R type |
Heater | 9.6kW |
Hot zone | 300mm |
Heating element | SiC |
Insulation | Ceramic |
External size | 690x570x730mm |
Weight | 145kg |
Power supply | 220V, 50/60Hz, 1p, 44A |
SH-FU-50TS (50mm diameter tube and 300mm hot zone)
1700℃ high temp tube furnace (50mm diameter tube and 300mm hot zone)
– High temp tube furnace with solid door
– Double housing and low surface temperature
– Recommended ideal running temperature is below 1550℃
– Great durability thanks to SIC heating element and easy replacement of MoSi2
– R type thermocouple
– Suitable for gas exchange experiment
– Light weight and prompt heat up thanks to ceramic insulation
– Built in programmable controller. 5 patterns and 9 segment/pattern. Total 45 segments
– Built in over temp protector
– SCR operation and built in programmable controller provides low noise operation and precise temp control (+/-1℃)
– Wide choice of applicable tube sizes. 50/80/100/120mm diameter.
– Wide choice of tube materials. Quartz, ceramic, alumina and alloy
Model | SH-FU-50TS |
Max temperature | 1700℃ |
Continuous running temperature | 1550℃ |
Tube diameter | 50mm |
Controller | Programmable controller |
Sensor | R type |
Heater | 4.1kW |
Hot zone | 300mm |
Heating element | SIC |
Insulation | MoSi2 |
External size | 690x550x980mm |
Weight | 67kg |
Power supply | 220V, 50/60Hz, 1p, 19A |
SH-FU-80TS (80mm diameter tube and 300mm hot zone)
1700℃ high temp tube furnace (80mm diameter tube and 300mm hot zone)
– High temp tube furnace with solid door
– Double housing and low surface temperature
– Recommended ideal running temperature is below 1550℃
– Great durability thanks to SIC heating element and easy replacement of MoSi2
– R type thermocouple
– Suitable for gas exchange experiment
– Light weight and prompt heat up thanks to ceramic insulation
– Built in programmable controller. 5 patterns and 9 segment/pattern. Total 45 segments
– Built in over temp protector
– SCR operation and built in programmable controller provides low noise operation and precise temp control (+/-1℃)
– Wide choice of applicable tube sizes. 50/80/100/120mm diameter.
– Wide choice of tube materials. Quartz, ceramic, alumina and alloy
Model | SH-FU-80TS |
Max temperature | 1700℃ |
Continuous running temperature | 1550℃ |
Tube diameter | 80mm |
Controller | Programmable controller |
Sensor | R type |
Heater | 5.6kW |
Hot zone | 300mm |
Heating element | SIC |
Insulation | MoSi2 |
External size | 690x580x1010mm |
Weight | 72kg |
Power supply | 220V, 50/60Hz, 1p, 25A |
SH-FU-100TS (100mm diameter tube and 300mm hot zone)
1700℃ high temp tube furnace (50mm diameter tube and 300mm hot zone)
– High temp tube furnace with solid door
– Double housing and low surface temperature
– Recommended ideal running temperature is below 1550℃
– Great durability thanks to SIC heating element and easy replacement of MoSi2
– R type thermocouple
– Suitable for gas exchange experiment
– Light weight and prompt heat up thanks to ceramic insulation
– Built in programmable controller. 5 patterns and 9 segment/pattern. Total 45 segments
– Built in over temp protector
– SCR operation and built in programmable controller provides low noise operation and precise temp control (+/-1℃)
– Wide choice of applicable tube sizes. 50/80/100/120mm diameter.
– Wide choice of tube materials. Quartz, ceramic, alumina and alloy
Model | SH-FU-100TS |
Max temperature | 1700℃ |
Continuous running temperature | 1550℃ |
Tube diameter | 100mm |
Controller | Programmable controller |
Sensor | R type |
Heater | 6.5kW |
Hot zone | 300mm |
Heating element | SIC |
Insulation | MoSi2 |
External size | 690x600x1030mm |
Weight | 114kg |
Power supply | 220V, 50/60Hz, 1p, 30A |
SH-FU-120TS (120mm diameter tube and 300mm hot zone)
1700℃ high temp tube furnace (120mm diameter tube and 300mm hot zone)
– High temp tube furnace with solid door
– Double housing and low surface temperature
– Recommended ideal running temperature is below 1550℃
– Great durability thanks to SIC heating element and easy replacement of MoSi2
– R type thermocouple
– Suitable for gas exchange experiment
– Light weight and prompt heat up thanks to ceramic insulation
– Built in programmable controller. 5 patterns and 9 segment/pattern. Total 45 segments
– Built in over temp protector
– SCR operation and built in programmable controller provides low noise operation and precise temp control (+/-1℃)
– Wide choice of applicable tube sizes. 50/80/100/120mm diameter.
– Wide choice of tube materials. Quartz, ceramic, alumina and alloy
Model | SH-FU-120TS |
Max temperature | 1700℃ |
Continuous running temperature | 1550℃ |
Tube diameter | 50mm |
Controller | Programmable controller |
Sensor | R type |
Heater | 8kW |
Hot zone | 300mm |
Heating element | SIC |
Insulation | MoSi2 |
External size | 690x640x1110mm |
Weight | 145kg |
Power supply | 220V, 50/60Hz, 1p, 36A |
SH-FU-50TS (50mm diameter tube and 300mm hot zone)
1800℃ high temp tube furnace (50mm diameter tube and 300mm hot zone)
– High temp tube furnace with solid door
– Double housing and low surface temperature
– Recommended ideal running temperature is below 1650℃
– Great durability thanks to SIC heating element and easy replacement of MoSi2
– B type thermocouple
– Suitable for gas exchange experiment
– Light weight and prompt heat up thanks to ceramic insulation
– Built in programmable controller. 5 patterns and 9 segment/pattern. Total 45 segments
– Built in over temp protector
– SCR operation and built in programmable controller provides low noise operation and precise temp control (+/-1℃)
– Wide choice of applicable tube sizes. 50/80/100/120mm diameter.
– Wide choice of tube materials. Quartz, ceramic, alumina and alloy
Model | SH-FU-50TS |
Max temperature | 1800℃ |
Continuous running temperature | 1650℃ |
Tube diameter | 50mm |
Controller | Programmable controller |
Sensor | B type |
Heater | 3.1kW |
Hot zone | 300mm |
Heating element | SIC |
Insulation | MoSi2 |
External size | 690x550x980mm |
Weight | 67kg |
Power supply | 220V, 50/60Hz, 1p, 14A |
SH-FU-80TS (80mm diameter tube and 300mm hot zone)
1800℃ high temp tube furnace (80mm diameter tube and 300mm hot zone)
– High temp tube furnace with solid door
– Double housing and low surface temperature
– Recommended ideal running temperature is below 1650℃
– Great durability thanks to SIC heating element and easy replacement of MoSi2
– B type thermocouple
– Suitable for gas exchange experiment
– Light weight and prompt heat up thanks to ceramic insulation
– Built in programmable controller. 5 patterns and 9 segment/pattern. Total 45 segments
– Built in over temp protector
– SCR operation and built in programmable controller provides low noise operation and precise temp control (+/-1℃)
– Wide choice of applicable tube sizes. 50/80/100/120mm diameter.
– Wide choice of tube materials. Quartz, ceramic, alumina and alloy
Model | SH-FU-80TS |
Max temperature | 1800℃ |
Continuous running temperature | 1650℃ |
Tube diameter | 80mm |
Controller | Programmable controller |
Sensor | B type |
Heater | 4.2kW |
Hot zone | 300mm |
Heating element | SIC |
Insulation | MoSi2 |
External size | 690x580x1010mm |
Weight | 72kg |
Power supply | 220V, 50/60Hz, 1p, 19A |
SH-FU-100TS (100mm diameter tube and 300mm hot zone)
1800℃ high temp tube furnace (100mm diameter tube and 300mm hot zone)
– High temp tube furnace with solid door
– Double housing and low surface temperature
– Recommended ideal running temperature is below 1650℃
– Great durability thanks to SIC heating element and easy replacement of MoSi2
– B type thermocouple
– Suitable for gas exchange experiment
– Light weight and prompt heat up thanks to ceramic insulation
– Built in programmable controller. 5 patterns and 9 segment/pattern. Total 45 segments
– Built in over temp protector
– SCR operation and built in programmable controller provides low noise operation and precise temp control (+/-1℃)
– Wide choice of applicable tube sizes. 50/80/100/120mm diameter.
– Wide choice of tube materials. Quartz, ceramic, alumina and alloy
Model | SH-FU-100TS |
Max temperature | 1800℃ |
Continuous running temperature | 1650℃ |
Tube diameter | 100mm |
Controller | Programmable controller |
Sensor | B type |
Heater | 4.9kW |
Hot zone | 300mm |
Heating element | SIC |
Insulation | MoSi2 |
External size | 690x600x1030mm |
Weight | 114kg |
Power supply | 220V, 50/60Hz, 1p, 22A |
SH-FU-120TS (120mm diameter tube and 300mm hot zone)
1800℃ high temp tube furnace (120mm diameter tube and 300mm hot zone)
– High temp tube furnace with solid door
– Double housing and low surface temperature
– Recommended ideal running temperature is below 1650℃
– Great durability thanks to SIC heating element and easy replacement of MoSi2
– B type thermocouple
– Suitable for gas exchange experiment
– Light weight and prompt heat up thanks to ceramic insulation
– Built in programmable controller. 5 patterns and 9 segment/pattern. Total 45 segments
– Built in over temp protector
– SCR operation and built in programmable controller provides low noise operation and precise temp control (+/-1℃)
– Wide choice of applicable tube sizes. 50/80/100/120mm diameter.
– Wide choice of tube materials. Quartz, ceramic, alumina and alloy
Model | SH-FU-120TS |
Max temperature | 1800℃ |
Continuous running temperature | 1650℃ |
Tube diameter | 120mm |
Controller | Programmable controller |
Sensor | B type |
Heater | 6kW |
Hot zone | 300mm |
Heating element | SIC |
Insulation | MoSi2 |
External size | 690x640x1110mm |
Weight | 145kg |
Power supply | 220V, 50/60Hz, 1p, 27A |
1200℃ Tube Furnace Package(300mm/600mm)
Here is the proud supply reference of SH Scientific Muffle Furnace, Tube Furnace and Vacuum Furnace from customers and industries in US and Canada.
- Destructive testing laboratories who carry heat treatment of ceramic, alloy, titanium and etc for aerospace and metallic production industries.
●Building companies who transforms metallic power such as nickel alloy into sintered materials by sintering.
● Material technology providers who develop polymer composites and graphene materials.
● Aerospace companies who perform cyclic oxidation test between 1700C to room temperature in atmosphere-controlled environment.
● Medical and healthcare companies who need analysis of ashes and contents through combustion of materials.
● Material innovation companies who do sintering in vacuum or in inert gases.
● Subsea and surface injection system companies who need vacuum furnace for softening cycles, annealing and age hardening of Inconel 718 tubes.
● Analytical research labs who perform various material testing with thermal treatment.
● Medical implants manufacturers who anneal alloy powders.
● Material scientists in universities who do sintering materials such as polymer-derived ceramic parts.
● Applied science engineers who process solid oxide fuel cells (SOFC).
● Environmental and chemical researchers who need combustion of materials.
● Regulatory compliance service providers in the areas of hazardous waste thermal treatment, air permitting, air pollution control, contaminated soil remediation, and hazardous waste management.
● Metallic parts manufacturers who need vacuum brazing and heat treating for steel.
● Water treatment companies who test glass content in FRP (fiber reinforced polymer) products according to ASTM D2584.
● Semiconductor manufacturers who anneal Gallium nitride (GaN) semiconductor wafer.
● Engineering companies who do curing and sintering solutions in porous ceramic tubes.
● Civil engineers who need soil combustion.
● University labs who anneal Si wafer in vacuum condition.
● Chemistry research departments who do the thermal treatments (stabilization in air and carbonization in argon) of carbon nanofiber precursors.
● Marine equipment manufacturers who analyze ash content in marine HFO (Heavy Fuel Oil).
● Graphene solution companies who produce graphene-based materials by CVD (Chemical Vapor Deposition) method. CVD furnace
● Solid state battery manufacturer with polymer electrolyte, oxide electrolyte, sulfide electrolyte, phosphate electrolyte and etc.
SH Scientific is 40 years old laboratory equipment manufacturer and we supply vacuum ovens, cold trap baths, vacuum pumps, industrial drying ovens, forced convection drying ovens, CBD isolate vacuum chambers, terpene traps, stirring mantles, recirculating chillers and heaters, incubators, climate chambers, bio safety cabinets, fume hoods, autoclaves, water baths, oil baths, ultrasonic cleaners, rotary evaporators, glass reactors, clean bench and so on.
And we do OEM and custom products as well.
Package Model | FU-PK-G1 | FU-PK-G2 | FU-PK-G3 | FU-PK-G4 |
Furnace Model | SH-FU-50(S,L)TG-WG | SH-FU-80(S,L)TG-WG | SH-FU-100(S,L)TG-WG | SH-FU-120(S,L)TG-WG |
Chiller | SH-WB-7CDR | SH-WB-7CDR | SH-WB-13CDR | SH-WB-13CDR |
Vacuum Pump | SH-V10 | SH-V10 | SH-V10 | SH-V10 |
Oil Mist Trap | VOT-1020 | VOT-1020 | VOT-1020 | VOT-1020 |
Dimension 600mm Hot Zone | 1265x725x1420mm | 1265x725x1440mm | 1265x800x1495mm | 1265x800x1570mm |
Dimension 300mm Hot Zone | 49.80×28.54×55.90″ | 49.80×28.54×56.69 | 49.80×28.54×56.69 | 49.80×28.54×56.69 |
Dimension 600mm Hot Zone | 1465x725x1420mm | 1465x725x1440mm | 1465x800x1495mm | 1465x800x1570mm |
Cat.NO 300mm Hot Zone | 49.80×28.54×55.90″ | 49.80×28.54×56.69 | 49.80×31.49×59.85 | 49.80×31.49×61.81 |
Cat.NO 600mm Hot Zone | FUPKG1300 | FUPKG2300 | FUPKG3300 | FUPKG4300 |
1500℃ Tube Furnace Package(300mm)
Here is the proud supply reference of SH Scientific Muffle Furnace, Tube Furnace and Vacuum Furnace from customers and industries in US and Canada.
- Destructive testing laboratories who carry heat treatment of ceramic, alloy, titanium and etc for aerospace and metallic production industries.
●Building companies who transforms metallic power such as nickel alloy into sintered materials by sintering.
● Material technology providers who develop polymer composites and graphene materials.
● Aerospace companies who perform cyclic oxidation test between 1700C to room temperature in atmosphere-controlled environment.
● Medical and healthcare companies who need analysis of ashes and contents through combustion of materials.
● Material innovation companies who do sintering in vacuum or in inert gases.
● Subsea and surface injection system companies who need vacuum furnace for softening cycles, annealing and age hardening of Inconel 718 tubes.
● Analytical research labs who perform various material testing with thermal treatment.
● Medical implants manufacturers who anneal alloy powders.
● Material scientists in universities who do sintering materials such as polymer-derived ceramic parts.
● Applied science engineers who process solid oxide fuel cells (SOFC).
● Environmental and chemical researchers who need combustion of materials.
● Regulatory compliance service providers in the areas of hazardous waste thermal treatment, air permitting, air pollution control, contaminated soil remediation, and hazardous waste management.
● Metallic parts manufacturers who need vacuum brazing and heat treating for steel.
● Water treatment companies who test glass content in FRP (fiber reinforced polymer) products according to ASTM D2584.
● Semiconductor manufacturers who anneal Gallium nitride (GaN) semiconductor wafer.
● Engineering companies who do curing and sintering solutions in porous ceramic tubes.
● Civil engineers who need soil combustion.
● University labs who anneal Si wafer in vacuum condition.
● Chemistry research departments who do the thermal treatments (stabilization in air and carbonization in argon) of carbon nanofiber precursors.
● Marine equipment manufacturers who analyze ash content in marine HFO (Heavy Fuel Oil).
● Graphene solution companies who produce graphene-based materials by CVD (Chemical Vapor Deposition) method. CVD furnace
● Solid state battery manufacturer with polymer electrolyte, oxide electrolyte, sulfide electrolyte, phosphate electrolyte and etc.
SH Scientific is 40 years old laboratory equipment manufacturer and we supply vacuum ovens, cold trap baths, vacuum pumps, industrial drying ovens, forced convection drying ovens, CBD isolate vacuum chambers, terpene traps, stirring mantles, recirculating chillers and heaters, incubators, climate chambers, bio safety cabinets, fume hoods, autoclaves, water baths, oil baths, ultrasonic cleaners, rotary evaporators, glass reactors, clean bench and so on.
And we do OEM and custom products as well.
Package Model | FU-PK-G1 | FU-PK-G2 | FU-PK-G3 | FU-PK-G4 |
Furnace Model | SH-FU-50(S,L)TG-WG | SH-FU-80(S,L)TG-WG | SH-FU-100(S,L)TG-WG | SH-FU-120(S,L)TG-WG |
Chiller | SH-WB-7CDR | SH-WB-7CDR | SH-WB-13CDR | SH-WB-13CDR |
Vacuum Pump | SH-V10 | SH-V10 | SH-V10 | SH-V10 |
Oil Mist Trap | VOT-1020 | VOT-1020 | VOT-1020 | VOT-1020 |
Dimension 600mm Hot Zone | 1265x725x1420mm | 1265x725x1440mm | 1265x800x1495mm | 1265x800x1570mm |
Dimension 300mm Hot Zone | 49.80×28.54×55.90″ | 49.80×28.54×56.69 | 49.80×28.54×56.69 | 49.80×28.54×56.69 |
Dimension 600mm Hot Zone | 1465x725x1420mm | 1465x725x1440mm | 1465x800x1495mm | 1465x800x1570mm |
Cat.NO 300mm Hot Zone | 49.80×28.54×55.90″ | 49.80×28.54×56.69 | 49.80×31.49×59.85 | 49.80×31.49×61.81 |
Cat.NO 600mm Hot Zone | FUPKG1300 | FUPKG2300 | FUPKG3300 | FUPKG4300 |
1700℃,1800℃ Tube Furnace Package(300mm)
Destructive testing laboratories who carry heat treatment of ceramic, alloy, titanium and etc for aerospace and metallic production industries.
● Building companies who transforms metallic power such as nickel alloy into sintered materials by sintering.
● Material technology providers who develop polymer composites and graphene materials.
● Aerospace companies who perform cyclic oxidation test between 1700C to room temperature in atmosphere-controlled environment.
● Medical and healthcare companies who need analysis of ashes and contents through combustion of materials.
● Material innovation companies who do sintering in vacuum or in inert gases.
● Subsea and surface injection system companies who need vacuum furnace for softening cycles, annealing and age hardening of Inconel 718 tubes.
● Analytical research labs who perform various material testing with thermal treatment.
● Medical implants manufacturers who anneal alloy powders.
● Material scientists in universities who do sintering materials such as polymer-derived ceramic parts.
● Applied science engineers who process solid oxide fuel cells (SOFC).
● Environmental and chemical researchers who need combustion of materials.
● Regulatory compliance service providers in the areas of hazardous waste thermal treatment, air permitting, air pollution control, contaminated soil remediation, and hazardous waste management.
● Metallic parts manufacturers who need vacuum brazing and heat treating for steel.
● Water treatment companies who test glass content in FRP (fiber reinforced polymer) products according to ASTM D2584.
● Semiconductor manufacturers who anneal Gallium nitride (GaN) semiconductor wafer.
● Engineering companies who do curing and sintering solutions in porous ceramic tubes.
● Civil engineers who need soil combustion.
● University labs who anneal Si wafer in vacuum condition.
● Chemistry research departments who do the thermal treatments (stabilization in air and carbonization in argon) of carbon nanofiber precursors.
● Marine equipment manufacturers who analyze ash content in marine HFO (Heavy Fuel Oil).
● Graphene solution companies who produce graphene-based materials by CVD (Chemical Vapor Deposition) method. CVD furnace
● Solid state battery manufacturer with polymer electrolyte, oxide electrolyte, sulfide electrolyte, phosphate electrolyte and etc.
SH Scientific is 40 years old laboratory equipment manufacturer and we supply vacuum ovens, cold trap baths, vacuum pumps, industrial drying ovens, forced convection drying ovens, CBD isolate vacuum chambers, terpene traps, stirring mantles, recirculating chillers and heaters, incubators, climate chambers, bio safety cabinets, fume hoods, autoclaves, water baths, oil baths, ultrasonic cleaners, rotary evaporators, glass reactors, clean bench and so on.
And we do OEM and custom products as well.
Destructive testing laboratories who carry heat treatment of ceramic, alloy, titanium and etc for aerospace and metallic production industries.
● Building companies who transforms metallic power such as nickel alloy into sintered materials by sintering.
● Material technology providers who develop polymer composites and graphene materials.
● Aerospace companies who perform cyclic oxidation test between 1700C to room temperature in atmosphere-controlled environment.
● Medical and healthcare companies who need analysis of ashes and contents through combustion of materials.
● Material innovation companies who do sintering in vacuum or in inert gases.
● Subsea and surface injection system companies who need vacuum furnace for softening cycles, annealing and age hardening of Inconel 718 tubes.
● Analytical research labs who perform various material testing with thermal treatment.
● Medical implants manufacturers who anneal alloy powders.
● Material scientists in universities who do sintering materials such as polymer-derived ceramic parts.
● Applied science engineers who process solid oxide fuel cells (SOFC).
● Environmental and chemical researchers who need combustion of materials.
● Regulatory compliance service providers in the areas of hazardous waste thermal treatment, air permitting, air pollution control, contaminated soil remediation, and hazardous waste management.
● Metallic parts manufacturers who need vacuum brazing and heat treating for steel.
● Water treatment companies who test glass content in FRP (fiber reinforced polymer) products according to ASTM D2584.
● Semiconductor manufacturers who anneal Gallium nitride (GaN) semiconductor wafer.
● Engineering companies who do curing and sintering solutions in porous ceramic tubes.
● Civil engineers who need soil combustion.
● University labs who anneal Si wafer in vacuum condition.
● Chemistry research departments who do the thermal treatments (stabilization in air and carbonization in argon) of carbon nanofiber precursors.
● Marine equipment manufacturers who analyze ash content in marine HFO (Heavy Fuel Oil).
● Graphene solution companies who produce graphene-based materials by CVD (Chemical Vapor Deposition) method. CVD furnace
● Solid state battery manufacturer with polymer electrolyte, oxide electrolyte, sulfide electrolyte, phosphate electrolyte and etc.
SH Scientific is 40 years old laboratory equipment manufacturer and we supply vacuum ovens, cold trap baths, vacuum pumps, industrial drying ovens, forced convection drying ovens, CBD isolate vacuum chambers, terpene traps, stirring mantles, recirculating chillers and heaters, incubators, climate chambers, bio safety cabinets, fume hoods, autoclaves, water baths, oil baths, ultrasonic cleaners, rotary evaporators, glass reactors, clean bench and so on.
And we do OEM and custom products as well.
Quartz Tube
| Model | Size(I.D/O.D×L) | Model | Size(I.D/O.D×L) |
|---|---|---|---|
| SH-QT-50 | 46/50×1000mm / 1.81/1.97×39.37” | SH-QT-50 (1200) | 46/50×1200mm /1.81/1.97×47.24” |
| SH-QT-60 | 55/60×1000mm / 2.17/2.36×39.37” | SH-QT-60 (1200) | 55/60×1200mm /2.17/2.36×47.24” |
| SH-QT-80 | 74/80×1000mm / 2.91/3.15×39.37” | SH-QT-80 (1200) | 74/80×1200mm /2.91/3.15×47.24” |
| SH-QT-100 | 94/100×1000mm / 3.70/3.94×39.37” | SH-QT-100 (1200) | 94/100×1200mm /3.70/3.94×47.24” |
| SH-QT-120 | 114/120×1000mm / 4.49/4.72×39.37” | SH-QT-120 (1200) | 114/120×1200mm /4.49/4.72×47.24” |
| SH-QT-150 | 144/150×1000mm /4.49/5.91×39.37” | SH-QT-150(1200) | 144/150×1200mm /4.49/5.91×47.24” |
| SH-QT-180 | 174/180×1000mm /6.85/7.08×39.37” | SH-QT-180(1200) | 174/180×1200mm /6.85/7.08×47.24” |
| SH-QT-200 | 193/200×1000mm /7.60/7.87×39.37” | SH-QT-200(1200) | 193/200×1200mm /7.60/7.87×47.24” |
High Temp Proof Gloves
High Temperature Proof gloves
Alumina Tube
Model No | Size(I.D/O.DxL) |
SH-AT-25 | 20/25x1000mm/0.79/0.98×39.37 |
SH-AT-30 | 24/30x1000mm/0.94/1.18×39.37 |
| SH-AT-35 | 28/35x1000mm/1.10/1.38×39.37 |
| SH-AT-50 | 42/50x1000mm/1.65/1.97×39.37 |
SH-AT-60 | 50/60x1000mm/1.97/2.36×39.37 |
SH-AT-70 | 60/70x1000mm/2.36/2.76×39.37 |
| SH-AT-80 | 70/80x1000mm/2.76/3.15×39.37 |
| SH-AT-90 | 80/90x1000mm/3.15/3.54×39.37 |
| SH-AT-100 | 88/100x1000mm/3.46/3.96×39.37 |
| SH-AT-120 | 110/120x1000mm/4.33/4.72×39.37 |
Quartz Boat
QUARTZ BOAT
Model No | Size(ml.LxWxH) |
SH-QB-2 | 2ml,15x48x8mm/0.59×1.89×0.31 |
SH-QB-3 | 3ml,16x77x11mm/0.63×3.03×0.43 |
| SH-QB-5 | 5ml,20x77x11mm/0.79×3.03×0.43 |
| SH-QB-8 | 8ml,20x92x11mm/0.79×3.62×0.43 |
SH-QB-10 | 10ml,20x102x11mm/0.79×4.02×0.43 |
SH-QB-15 | 15ml,27x105x11mm/1.06×4.13×0.43 |
| Temp Limit | Operation Temp 1100ºC; Max Temp 1250º C |
Quartz Crucible with Lid
| Model No | Capa(ml) | Size | Temp Limit |
| SH-QC-30 | 30ml | ∅47,∅25xh36mm | Operational Temp 1100ºC; Max Temp 1250ºC |
| SH-QC-50 | 50ml | ∅54,∅34xh42mm | |
| SH-QC-100 | 100ml | ∅70,∅34xh55mm |
|
SH-QC-250 | 250ml | ∅110,∅50xh80mm |
|
SH-QC-500 | 500ml | ∅130,∅70xh100mm |
|
|
|
|
|
Ceramic Crucibles, Boat, dish
Ceramic Crucibles, Boat, dish
Crucible Lid
| Model | D1xD2(mm) |
|---|---|
| 641 321 000 301 (D/30) | 30×34 |
| 641 321 000 351 (D/35) | 35×39 |
| 641 321 000 401 (D/40) | 40×44 |
| 641 321 000 451 (D/45) | 45×49 |
| 641 321 000 501 (D/50) | 50×54 |
| 641 321 000 601 (D/60) | 60×64 |
| 641 321 000 701 (D/70) | 70×74 |
| 641 321 000 801 (D/80) | 80×84 |
Crucible Body (Middle form)
_shop1_163544.jpg)
| Model | DxH(mm) | V/ml approx. |
|---|---|---|
| 641 321 200 301 (2/30) | 30×25 | 10 |
| 641 321 200 351 (2/35) | 35×28 | 12 |
| 641 321 200 401 (2/40) | 40×32 | 20 |
| 641 321 200 451 (2/45) | 45×36 | 30 |
| 641 321 200 501 (2/50) | 50×40 | 45 |
| 641 321 200 601 (2/60) | 60×48 | 80 |
| 641 321 200 701 (2/70) | 70×56 | 120 |
| 641 321 200 801 (2/80) | 80×62 | 200 |
Crucible Body (High form)
_shop1_163556.jpg)
| Model | DxH(mm) | V/ml approx. |
|---|---|---|
| 641 321 300 301 (3/30) | 30×38 | 15 |
| 641 321 300 351 (3/35) | 35×44 | 26 |
| 641 321 300 401 (3/40) | 40×50 | 35 |
| 641 321 300 451 (3/45) | 45×56 | 50 |
| 641 321 300 501 (3/50) | 50×62 | 72 |
| 641 321 300 601 (3/60) | 60×75 | 120 |
Combustion boat
| Model | axbxH(mm) |
|---|---|
| 641 312 214 200 (214/2) | 75x13x8 |
| 641 312 214 300 (214/3) | 105x14x9 |
| 641 312 214 400 (214/4) | 85x13x8 |
| 641 312 214 800 (214/8) | 90x13x8 |
Annealing square dish
| Model | axbxH(mm) | V/ml approx. |
|---|---|---|
| 641 322 255 101 (255/1) | 50x35x12 | 6 |
| 641 322 255 201 (255/2) | 62x40x12 | 13 |
| 641 322 255 221 (255/2a) | 74x49x14 | 28 |
| 641 322 255 301 (255/3) | 95x65x14 | 40 |
Nickel Crucible with Lid
| Model No | Capa(ml) | Size | Temp Limit |
SH-QC-30 | 30ml | ∅38xh38mm | Operational Temp 600-1000ºC |
SH-QC-50 | 50ml | ∅48xh48mm |
|
SH-QC-100 | 100ml | ∅55xh55mm |
|
|
|
|
Alumina Crucible
Alumina Crucible
| Model No | Capacity(ml) | Size | Max. Temp | Lid(Model No) | Lid(Capa(ml) |
SH-ALC-10B | 10ml | ∅29xh30mm | 1700ºC | SH-ALC-10B | 10ml |
SH-ALC-20B | 20ml | ∅39xh29mm |
| SH-ALC-20B | 20ml |
SH-ALC-30B | 30ml | ∅52xh39mm |
| SH-ALC-30B | 30ml |
SH-ALC-50B | 50ml | ∅61xh49mm |
| SH-ALC-50B | 50ml |
SH-ALC-100B | 100ml | ∅72xh58mm |
| SH-ALC-100B | 100ml |
SH-ALC-150B | 150ml | ∅81xh67mm |
| SH-ALC-150B | 150ml |
SH-ALC-200B | 200ml | ∅86xh70mm |
| SH-ALC-200B | 200ml |
SH-ALC-250B | 250ml | ∅92xh75mm |
| SH-ALC-10B | 250ml |
SH-ALC-500B | 500ml | ∅110xh105mm |
| SH-ALC-500B | 500ml |
Crucible Tongs
| Model No | Opening Size(∅) | Length |
SH-CT-300 | 2∼30∅ | 300mm/11.81” |
SH-CT-400 | 2∼30∅ | 400mm/15.75” |
SH-CT-500 | 2∼30∅ | 500mm/19.69” |
Gas Sealing Mask for Tube Furnace
| Model No | Material |
SH-SM-50 | 50Φ TUBE, Aluminum(Option: SUS), 2ea/pack |
SH-SM-60 | 60Φ TUBE, Aluminum(Option: SUS), 2ea/pack |
SH-SM-80 | 80Φ TUBE, Aluminum(Option: SUS), 2ea/pack |
SH-SM-100 | 100Φ TUBE, Aluminum(Option: SUS), 2ea/pack |
SH-SM-120 | 120Φ TUBE, Aluminum(Option: SUS), 2ea/pack |
Programmable Controller (FC-1000)
- LCD Display
- Program mode, Standard Mode Selectable.
- Parameter setting
- Auto tune function
- Timer function
- PV,SV can be displayed together
| Display | Size(WxH) | 190x75mm / 7.48×2.95” |
|---|---|---|
| PV/SP Display | 4 Digit | |
| Operation Mode | Program / Standard | |
| Control Mode | 1CH Control | |
| Max Channel | – | |
| Features | Patterns & Segments | 5 patterns, 9 Segments / pattern, Total 45 Segments |
| Cycles | 1 ~ 999 | |
| Input | TC | K |
| Output | Control Output | SSR(Voltage Pulse) |
| Sampling Time | 250ms | |
| Accuracy | ±0.1% ±1% digit of Full Scale | |
| Power | Power | 100 ~ 240V AC, 50 ~ 60Hz |
| Power Consumption | Max 6W | |
