Air
Precision Air Compressor
Inspired by the success of our best-selling Genius line of nitrogen gas generators for LC-MS, Genius XE Nitrogen is a cutting-edge evolution combining advanced technology with refined and robust engineering. With two models – XE 35 (up to 35 L/min) and XE 70 (up to 70 L/min) – Genius XE Nitrogen provides a premium standalone nitrogen solution for high performance LC-MS and other mission-critical laboratory applications where performance and reliability are paramount.
Smaller, more discrete, and easier to use than ever before thanks to PeakOS™, Genius XE is the ultimate solution for zero-stress nitrogen gas in the lab. Featuring Multi-Stage Purification™ and next-generation integrated compressors with Electronic Compressor Optimization™ (ECO) technology, Genius XE delivers factory certifiable purity up to 99.5% on-demand, 24/7 with a convenient fixed annual service interval.
- Compressed air supply for Precision Nitrogen and Zero Air generators
- Single unit can supply both the Precision Nitrogen and Zero Air generators in a stack
- Duplex compressor mounting system to dampen noise and vibration
- Service & repair status indicators
- 12 month comprehensive on-site warranty
PG28L Purge Gas Generator
The PG28L gas generators from Peak Scientific are suitable for laboratory detectors requiring CO2 free gas such as FT-IR analysis. Using Pressure Swing Adsorption technology to remove organic contaminants and moisture from air, these generators provide a consistent flow of air to ensure little background noise in laboratory analysis.
Requiring minimal maintenance, the PG28L does require an external source of air to operate, Peak Scientific will be able to help with recommending a suitable air source if your laboratory does not have one.
- Purge Gas (PG) generators from Peak Scientific produce air which is free of CO2
- Ideal for commercial labs with a high throughput rate of samples
- High performance filters and PSA ensure maximum reduction of moisture (< -70ºC dew point).
- Few moving parts means minimum maintenance requirements and 24/7 performance
- Position generator where required, wall mountable for small labs
- More cost effective than any other gas supply as the FT-IR detector needs a constant flow of gas
- Completely silent in operation
- 12 month full comprehensive on-site warranty
PG14L Purge Gas Generator
The PG14L gas generator from Peak Scientific is suitable for laboratory detectors requiring CO2 free gas such as FT-IR analysis. Using Pressure Swing Adsorption technology to remove organic contaminants and moisture from air, these generators provide a consistent flow of air to ensure little background noise in laboratory analysis.
Requiring minimal maintenance, the PG14L does require an external source of air to operate and can be supported by the Precision Air Compressor.
- Purge Gas (PG) generators from Peak Scientific produce air which is free of CO2
- Ideal for commercial labs with a high throughput rate of samples
- High performance filters and PSA ensure maximum reduction of moisture (< -70ºC dew point).
- Few moving parts means minimum maintenance requirements and 24/7 performance
- Position generator where required, wall mountable for small labs
- More cost effective than any other gas supply as the FT-IR detector needs a constant flow of gas
- Completely silent in operation
- Can be supported by Precision Air Compressor
- 12 month full comprehensive on-site warranty
Precision Zero Air 18L Gas Generator
- Integrates with existing Precision products, with same modular, stackable design
- Hydrocarbon content (as Methane) < 0.05ppm for market-leading purity
- Up to 18L/min of Zero Air Up to 80psi/5.5bar outlet pressure
- Minimum maintenance requirements, no expensive catalyst chamber replacements
- Greatly reduced risk of contaminants entering system and no risk of running out of gas
- Stylish and contemporary aesthetics and functional design
- Status indicative lighting feature (amber warmup, green ready)
- Compatible with Precision Air Compressor
- 12 month comprehensive on-site warranty
- Multi-Stage Purification™ to efficiently remove moisture and contaminants, providing a consistent quality of gas
- Low impact on lab environment with low noise and heat emissions
- Next-generation high performance premium compressors, engineered exclusively for Genius XE
- Touch-screen full color user interface for ease of use and operation
- ECO (Electronic Compressor Optimisation™) technology for low energy consumption and compressor durability
- Fixed annual maintenance schedule
- 2 year comprehensive manufacturer’s warranty*
AD70L - Air Dryer
The AD70L is a useful attachment for any laboratory’s external source of air, removing moisture and ensuring the delivery of dry air. Moisture content in house air can contaminate lab instrumentation, impacting on results and in some cases damaging the instrument itself. Compact in size, wall-mountable and light, the AD70L requires little space and its few moving parts mean minimal maintenance is required.
- Produces clean, dry air, ensures optimum supply for gas generators and instruments
- Dryer performs 24/7 if needed
- Dryer is wall-mountable for small labs
- Few moving parts means little maintenance required and ensures long life of the generator
- Completely silent in operation
- Minimal set-up required
- 12 month comprehensive on-site warranty
AD302L - Air Dryer
The AD302L is a useful attachment for any laboratory’s external source of air, removing moisture and ensuring the delivery of dry air. Moisture content in house air can contaminate lab instrumentation, impacting on results and in some cases damaging the instrument itself. Compact in size, wall-mountable and light, the AD302L requires little space and its few moving parts mean minimal maintenance is required.
- Produces clean, dry air, ensures optimum supply for gas generators and instruments
- Dryer performs 24/7 if needed
- Dryer is wall-mountable for small labs
- Few moving parts means little maintenance required and ensures long life of the generator
- Completely silent in operation
- Minimal set-up required
- 12 month comprehensive on-site warranty
AD140L Air Dryer
The AD140L is a useful attachment for any laboratory’s external source of air, removing moisture and ensuring the delivery of dry air. Moisture content in house air can contaminate lab instrumentation, impacting on results and in some cases damaging the instrument itself. Compact in size, wall-mountable and light, the AD140L requires little space and its few moving parts mean minimal maintenance is required.
- Produces clean, dry air, ensures optimum supply for gas generators and instruments
- Dryer performs 24/7 if needed
- Dryer is wall-mountable for small labs
- Few moving parts means little maintenance required and ensures long life of the generator
- Completely silent in operation
- Minimal set-up required
- 12 month comprehensive on-site warranty
Precision Zero Air 1.5 Gas Generator
The Precision Zero Air generators are designed specifically to supply clean, dry, hydrocarbon-free air to be used as flame support gas for GC at both standard and trace detection limits.
As with all Precision series generators, Zero Air benefits from a compact and modular, stackable design, minimizing the total footprint required for GC gas supply, and providing flexibility to add or remove modules as your laboratory requirements evolve over time.
- Integrates seamlessly with other Precision units Hydrocarbon content (as Methane) < 0.05ppm for market leading purity
- Minimum lifetime maintenance requirements, no expensive catalyst chamber replacements
- Avoid risk of contaminants entering the system (when switching out empty cylinders)
- No risk of running out of gas in middle of analysis
- Compatible with Precision Air Compressor
- Status indicative lighting feature (amber warm-up, green ready)
- 12 month comprehensive on-site warranty
TOC 1000 gas generator
Developed exclusively for SCIEX, the MS Bench SCI 2 range provides a modular workstation with provision for either integrated gas generation or a noise abating enclosure for roughing pumps. MS Bench SCI 2 is designed specifically for use with the SCIEX Triple Quad™ 7500 LC-MS/MS System– QTRAP® Ready.
Two variants of the MS Bench SCI 2 are available. MS Bench (G) SCI 2 features a self contained gas generator, providing a reliable and cost efficient source of both nitrogen (Curtain Gas™) and clean, dry oil-free air for source and exhaust gas at flows and pressures configured to meet SCIEX 7500 System requirements. The other variant, the MS Bench SCI 2, comes without the gas generator, instead providing a compartment below the bench, suitable for housing up to two MS roughing pumps
- Designed exclusively for SCIEX to provide modular bench solution for SCIEX Triple Quad™ 7500 LC-MS/MS System*–QTRAP® Ready
- ‘Genius Inside’: true plug & play gas generation
- No external compressed air source required
- Noise & vibration dampening, suitable for use as instrumentation bench
- Fan assisted cooling for vacuum pumps
- Reclassifier vent preventing internal condensation (MS Bench (G) SCI 2 only)
- CSA / FCC / CE compliant
- Chemical-resistant phenolic resin worktop
- Levelling castor wheels for seamless installation with existing lab bench system
CG15L Zero Air Generator
Many laboratory applications, such as air emission applications, require calibration gas. To meet these requirements, Peak Scientific have produced the CG15L which generates zero air by removing carbon dioxide, methane and moisture from the air for applications requiring a higher performance than zero air models.
- Produces clean, dry laboratory grade air, ensures optimum supply for gas generators and instruments
- Continuous supply of calibration gas
- Meets requirements of Federal Register Specification 40CFR 86.114-79
- Few moving parts means little maintenance required and ensures long life of the generator
- Completely silent in operation
- Can be supported by Precision Air Compressor
- Minimal set-up required 12 month comprehensive on-site warranty
Solaris Air Compressor for ELSD
Peak Scientific’s Solaris Air Compressor generator has been designed to support the Solaris Nitrogen generator for ELSD in labs without an external supply of high quality air. Available in both a 230v and 110v option this unit is suitable for all regions.
A common feature in all of Peak’s products is ease of use for laboratory workers, allowing them to concentrate on analysis. This unit has been engineered to limit use of valuable laboratory workspace through its stackable design, the Solaris ELSD nitrogen generator can be stacked on top of the compressor.
Solaris has been developed to provide an on-site gas supply of high purity nitrogen for ELSD (Evaporative Light Scattering Detector) for labs using HPLC (High Performance Liquid Chromatography) or alternatively to supply Compact Mass Spectrometer instruments.
- Stackable with Solaris nitrogen generator for ELSD and Compact Mass Spectrometers
- Provides air for nitrogen system for labs without an external supply
- Gas is supplied on demand at the push of a button
- 12 month comprehensive on-site warranty
Precision Zero Air 7L Flame Support Generator
Precision Zero Air 7L is engineered specifically to provide flame support gas to multiple GC instruments. It provides up to 7 liters per minute of hydrocarbon free air, which is ideal for labs with multiple GC Detectors, such as FID, FPD, and NPD. The Precision Zero Air 7L expands Peak Scientific’s Precision range, with the same stackable form-factor and compact footprint ensuring it integrates seamlessly with other Precision modules to provide a convenient, reliable and safe gas solution for specific GC gas requirements.
- Integrates with existing Precision products, with same modular, stackable design
- Hydrocarbon content (as Methane) < 0.05ppm for market-leading purity
- Up to 7L/min of Zero Air
- Up to 80psi/5.5bar outlet pressure
- Minimum maintenance requirements, no expensive catalyst chamber replacements
- Greatly reduced risk of contaminants entering system and no risk of running out of gas
- Stylish and contemporary aesthetics and functional design
- Status indicative lighting feature (amber warmup, green ready)
- Compatible with Precision Air Compressor
- 12 month comprehensive on-site warranty
Precision Zero Air 30L Gas Generator
The Precision Zero Air 30L is engineered specifically to provide flame support gas to multiple GC instruments. It provides up to 30 litres per minute of hydrocarbon free air, which is suitable to support your FID, FPD and NPD at both standard and trace detection limits.
Expanding Peak Scientific’s Precision range, the Precision Zero Air 30L, has the same stackable form-factor and compact footprint found in the rest of the Precision Series, ensuring it integrates seamlessly with other Precision models to provide a convenient, reliable and safe gas solution for specific GC gas requirements.
- Integrates with existing Precision products, with same modular, stackable design
- Hydrocarbon content (as Methane) < 0.05ppm for market-leading purity
- Up to 30L/min of Zero Air Up to 100psi/6.9bar outlet pressure
- Minimum maintenance requirements, no expensive catalyst chamber replacements
- Greatly reduced risk of contaminants entering system and no risk of running out of gas
- Stylish and contemporary aesthetics and functional design
- Status indicative lighting feature (amber warmup, green ready)
- Compatible with Precision Air Compressor
- 12 month comprehensive on-site warranty
Precision Zero Air 3.5L Gas Generator
The Precision Zero Air generators are designed specifically to supply clean, dry, hydrocarbon-free air to be used as flame support gas for GC. As with all Precision Series generators, Zero Air benefits from a compact and modular, stackable design, minimizing the total footprint required for GC gas supply, and providing flexibility to add or remove modules as your laboratory requirements evolve over time.
- Integrates seamlessly with other Precision units
- Hydrocarbon content (as Methane) < 0.05ppm for market leading purity
- Minimum lifetime maintenance requirements, no expensive catalyst chamber replacements
- Avoid risk of contaminants entering the system (when switching out empty cylinders)
- No risk of running out of gas in middle of analysis
- Compatible with Precision Air
- Compressor Status indicative lighting feature (amber warm-up, green ready)
- 12 month comprehensive on-site warranty
