Petrifilm Count Plates and Readers
- Petrifilm Count Plates and Readers
- Soleris Automated Testing
- Culture Media
- Hygiene Monitoring
- Allergen Testing
- Natural Tcain Testing
- Pathogen Detection
- Nutritional Analysis
Petrifilm® Aerobic Count Plates
The Neogen® Petrifilm® Aerobic Count Plate is a time-saving, sample-ready plate designed to determine total aerobic bacteria populations. A built-in grid facilitates counting colonies, helping to provide fast, precise and consistent results. Each Petrifilm Aerobic Count Plate contains a water-soluble gelling agent, nutrients and indicator — all the components needed for microbial growth with no agar preparation required. The Petrifilm Aerobic Count Plate provides total aerobic count in as little as 48 hours. A red indicator dye in the plate colors all colonies red for better contrast and easier colony counting. The red colonies are also easily distinguished from opaque food particles that can cause confusion when using other plating methods. In addition, Neogen® Petrifilm Aerobic Count Plates can be used to aerobically or anaerobically enumerate lactic acid bacteria in food and environmental samples.
The Petrifilm Plate Advantage
In today’s environment of heightened focus on food safety and increasingly stringent quality requirements, labs are under pressure to provide tests that are fast, reliable and consistently accurate. Petrifilm Plates have demonstrated consistent performance that has been cited globally with more than 200 certificates, recognitions, validations, and peer-review publications. For almost 40 years, food safety professionals around the world have put their trust in Petrifilm Plates. That’s because Petrifilm Plates have streamlined, standardized and simplified the process of microbial quantitative indicator testing, improving productivity and helping ensure the highest levels of product quality.
Features
- Aerobic Count results as soon as 48 hours.
- Plates are sample-ready, eliminating all the time-consuming steps of preparing media/agar dishes.
- Plate can be used for air, swab or surface contact environmental sampling
- This plate has been awarded Official Methods of Analysis (OMA) #986.33 for Milk (OMA) #989.10 for dairy products (OMA) #990.12 for food NF VALIDATION certificate: Neogen® 01/01-09/89 by AFNOR Certification for all human food products, pet food, industrial environmental samples
- Can be used with the Neogen® Petrifilm® Plate Reader Advanced for consistent, fast, automated reading and recording of results.
| Brand | Petrifilm® |
| Analyte | Aerobic |
| Platform | Rapid Microbiology |
| Result Type | Quantitative |
| Approvals | This plate has been awarded Official Methods of Analysis (OMA) #986.33 for Milk (OMA) #989.10 for dairy products (OMA) #990.12 for food NF VALIDATION certificate: Neogen® 01/01-09/89 by AFNOR Certification for all human food products, pet food, industrial environmental samples |
| Time to Result | 48 – 72 Hours |
| Storage Conditions | ≤ 8°C (46°F) |
| Quantity per Package | 100 plates |
| Package Dimensions | 20.00 cm x 17.00 cm x 4.00 cm |
| Package Weight | 0.57 lb |
Petrifilm® Rapid E. coli/Coliform Count Plates
The Neogen® Petrifilm® Rapid E. coli / Coliform Count (REC) Plate is a selective and differential sample ready culture medium system which contains proprietary nutrients, a cold water soluble gelling agent, 5-bromo-4-chloro-3-indolyl-D-glucuronide (BCIG) an indicator of glucuronidase activity, and a tetrazolium indicator that facilitates colony enumeration. The Petrifilm REC Plate is used for the enumeration of Escherichia coli ( E. coli) and coliforms in the food and beverage industries.
These plates provide both E. coli and total coliform count information with confirmed in just 18 to 24 hours. By eliminating subsequent confirmation steps required with most traditional reference methods, the Petrifilm Rapid E. coli/Coliform Count Plates can help increase productivity and reduce overall lab costs.
The Petrifilm Plate Advantage
In today’s environment of heightened focus on food safety and increasingly stringent quality requirements, labs are under pressure to provide tests that are fast, reliable and consistently accurate. Petrifilm Plates have demonstrated consistent performance that has been cited globally with more than 200 certificates, recognitions, validations, and peer-review publications. For almost 40 years, food safety professionals around the world have put their trust in Petrifilm Plates. That’s because Petrifilm Plates have streamlined, standardized and simplified the process of microbial quantitative indicator testing, improving productivity and helping ensure the highest levels of product quality.
Features
- E. coli and coliform results in 18-24 hours
- Plates are sample-ready, eliminating all the time-consuming steps of preparing media/agar dishes.
- This plate provides flexibility with validated performance at both ISO and FDA/BAM temperatures, and a single incubation time for both E. coli and coliforms.
- This plate has been awarded Official Methods of Analysis (OMA) #2018.13 for broad range of foods and select environmental surfaces and MicroVal certificate no. 2017LR76 for a broad range of foods and select environmental surfaces
- Can be used with the Petrifilm® Plate Reader Advanced for consistent, fast, automated reading and recording of results.
| Brand | Petrifilm® |
| Analyte | E. coli, Coliforms |
| Platform | Rapid Microbiology |
| Result Type | Quantitative |
| Approvals | This plate has been awarded Official Methods of Analysis (OMA) #2018.13 for broad range of foods and select environmental surfaces and MicroVal certificate no. 2017LR76 for a broad range of foods and select environmental surfaces |
| Time to Result | 18 – 24 Hours |
| Storage Conditions | -20 to 8°C (-4 to 46°F) |
| Quantity per Package | 50 plates |
| Package Dimensions | 19.50 cm x 17.50 cm x 4.00 cm |
| Package Weight | 0.44 lb |
Petrifilm® Lactic Acid Bacteria Count Plates
The Neogen® Petrifilm® Lactic Acid Bacteria Count (LAB) Plate is a self-contained, sample-ready-culture-medium system which contains nutrients, selective agents, a cold-water-soluble gelling agent, and a tetrazolium indicator that facilitates colony enumeration. The Petrifilm LAB Plate contains oxygen scavenging compounds which create an anaerobic environment for the recovery of homofermentative and heterofermentative lactic acid bacteria in the food and beverage industries. .
Anaerobic made easy
Every day, food processors, retailers and consumers are forced to throw out food spoiled with lactic acid bacteria. These normally useful bacteria can cause undesirable changes to ready-to-eat meats and seafood, dressings and sauces, vegetables and many other processed foods. This not only contributes to food waste and costly recalls, but can also damage your brand reputation. Now you can get true anaerobic results using standard aerobic incubation conditions. The self contained anaerobic environment in this plate enhances the recovery of lactic acid bacteria, providing fast, accurate results for effective control of product quality and shelf life.
The Petrifilm Plate Advantage
In today’s environment of heightened focus on food safety and increasingly stringent quality requirements, labs are under pressure to provide tests that are fast, reliable and consistently accurate. Petrifilm Plates have demonstrated consistent performance that has been cited globally with more than 200 certificates, recognitions, validations, and peer-review publications. For almost 40 years, food safety professionals around the world have put their trust in Petrifilm Plates. That’s because Petrifilm Plates have streamlined, standardized and simplified the process of microbial quantitative indicator testing, improving productivity and helping ensure the highest levels of product quality.
Features
- Results in 48 hours of incubation time.
- Plates are sample-ready, eliminating all the time-consuming steps of preparing media/agar dishes.
- Self-contained anaerobic environment enabled by oxygen-scavenging technology and oxygen-barrier films. No gas packs, chambers, or CO2 incubators needed.
- All-in-one method for differentiation of gas-producing colonies without Durham tubes or extra steps.
- This plate has been awarded Performance Tested Method (PTM) #041701 for selected foods and NF VALIDATION Neogen® 01/19-11/17 by AFNOR Certification for all human foods (excluding yogurts) and production environmental samples.
| Brand | Petrifilm® |
| Analyte | Lactic Acid Bacteria |
| Platform | Rapid Microbiology |
| Result Type | Quantitative |
| Approvals | This plate has been awarded Performance Tested Method (PTM) #041701 for selected foods and NF VALIDATION Neogen® 01/19-11/17 by AFNOR Certification for all human foods (excluding yogurts) and production environmental samples. |
| Time to Result | 45 – 51 Hours |
| Storage Conditions | -20 to 8°C (-4 to 46°F) |
| Quantity per Package | 50 plates |
| Package Dimensions | 19.60 cm x 17.20 cm x 4.00 cm |
| Package Weight | 0.75 lb |
Petrifilm® Aqua Heterotrophic Count Plates
The Neogen® Petrifilm Aqua Heterotrophic Count Plates are used for the enumeration of heterotrophic bacteria in bottled water industries. The Petrifilm® Aqua Heterotrophic Count Plate is a sample-ready culture medium system, which contains Standard Methods nutrients, a cold-water-soluble gelling agent, and a tetrazolium indicator that facilitates colony enumeration.
The Petrifilm Plate Advantage
In today’s environment of heightened focus on food safety and increasingly stringent quality requirements, labs are under pressure to provide tests that are fast, reliable and consistently accurate. Petrifilm Plates have demonstrated consistent performance that has been cited globally with more than 200 certificates, recognitions, validations, and peer-review publications. For almost 40 years, food safety professionals around the world have put their trust in Petrifilm Plates. That’s because Petrifilm Plates have streamlined, standardized and simplified the process of microbial quantitative indicator testing, improving productivity and helping ensure the highest levels of product quality.
Features
- Results in 48-72 hours hours.
- Detects heterotrophic bacteria in bottled water.
- Compatible with membrane filtration systems when used with mixed cellulose ester (MCE) filters.
| Brand | Petrifilm® |
| Analyte | Heterotrophic |
| Platform | Rapid Microbiology |
| Result Type | Quantitative |
| Time to Result | 48 – 72 Hours |
| Storage Conditions | ≤ 8°C (46°F) |
| Quantity per Package | 100 plates |
| Package Dimensions | 17.00 cm x 19.50 cm x 4.00 cm |
| Package Weight | 0.57 lb |
Petrifilm® Rapid Aerobic Count Plates
The Neogen® Petrifilm® Rapid Aerobic Count Plates are a sample ready, culture medium system, which contain nutrients, a coldwater soluble gelling agent, and a dual sensing indicator technology that facilitate colony enumeration in 24 hours for most food matrices and environmental samples. Proven as reliable as the SMA plate method, Petrifilm Rapid Aerobic Count Plates help agar users avoid costly retesting and delayed results due to interpretation issues caused by spreader colonies. Aerobic count bacteria are present in a variety of food matrices and serve as indicators for food spoilage. Getting accurate aerobic bacteria counts in your raw materials, finished product and production environment are critical to making time sensitive decisions that impact process control, cleaning decisions and, ultimately, product quality and safety.
The Petrifilm Plate Advantage
In today’s environment of heightened focus on food safety and increasingly stringent quality requirements, labs are under pressure to provide tests that are fast, reliable and consistently accurate. Petrifilm Plates have demonstrated consistent performance that has been cited globally with more than 200 certificates, recognitions, validations, and peer-review publications. For almost 40 years, food safety professionals around the world have put their trust in Petrifilm Plates. That’s because Petrifilm Plates have streamlined, standardized and simplified the process of microbial quantitative indicator testing, improving productivity and helping ensure the highest levels of product quality.
Features
- Provides results within 24 hours of incubation time (except for dairy powders).
- Plates are sample-ready, eliminating all the time-consuming steps of preparing media/agar dishes.
- Dual-sensing indicator technology that facilitate colony enumeration.
- This plate has been awarded Official Methods of Analysis (OMA) #2015.13 for Selected Food NF VALIDATION Neogen® 01/17-11/16 for Dairy products by AFNOR Certification
- Can be used with the Petrifilm® Plate Reader Advanced for consistent, fast, automated reading and recording of results.
| Brand | Petrifilm® |
| Analyte | Aerobic |
| Platform | Rapid Microbiology |
| Result Type | Quantitative |
| Approvals | This plate has been awarded Official Methods of Analysis (OMA) #2015.13.for Selected Food NF VALIDATION Neogen® 01/17-11/16 for Dairy products by AFNOR Certification |
| Time to Result | 24 – 48 Hours |
| Storage Conditions | -20 to 8°C (-4 to 46°F) |
| Quantity per Package | 50 plates |
| Package Dimensions | 19.50 cm x 17.00 cm x 3.70 cm |
| Package Weight | 0.49 lb |
Petrifilm® E. coli/Coliform Count Plates
The Neogen® Petrifilm® E. coli/Coliform Count Plate is a sample-ready-culture medium system which contains modified Violet Red Bile (VRB) nutrients, a cold-water-soluble gelling agent, an indicator of glucuronidase activity, 5-bromo-4-chloro-3-indolyl-D-glucuronide (BCIG), and a tetrazolium indicator that facilitates colony enumeration. Neogen® Petrifilm E. coli/Coliform Count Plates are used for the enumeration of Escherichia coli (E. coli) and coliforms in the food and beverage industries. Coliforms are not defined by taxonomy but rather by their biochemical characteristics.
The Petrifilm Plate Advantage
In today’s environment of heightened focus on food safety and increasingly stringent quality requirements, labs are under pressure to provide tests that are fast, reliable and consistently accurate. Petrifilm Plates have demonstrated consistent performance that has been cited globally with more than 200 certificates, recognitions, validations, and peer-review publications. For almost 40 years, food safety professionals around the world have put their trust in Petrifilm Plates. That’s because Petrifilm Plates have streamlined, standardized and simplified the process of microbial quantitative indicator testing, improving productivity and helping ensure the highest levels of product quality.
Features
- Confirmed E. coli results in 24-48 hours.
- Plates are sample-ready, eliminating all the time-consuming steps of preparing media/agar dishes.
- This plate has been awarded Official Methods of Analysis OMA #991.14.for Food OMA # 998.08 for Poultry, Meat and Seafood
- Can be used with the Petrifilm® Plate Reader Advanced for consistent, fast, automated reading and recording of results.
| Brand | Petrifilm® |
| Analyte | E. coli, Coliforms |
| Platform | Rapid Microbiology |
| Result Type | Quantitative |
| Approvals | This plate has been awarded Official Methods of Analysis OMA #991.14.for Food OMA # 998.08 for Poultry, Meat and Seafood |
| Time to Result | 22 – 26 Hours |
| Storage Conditions | ≤ 8°C (46°F) |
| Quantity per Package | 50 plates |
| Package Dimensions | 3.50 cm x 19.50 cm x 17.00 cm |
| Package Weight | 0.53 lb |
Petrifilm® High-Sensitivity Coliform Count Plates
The Neogen® Petrifilm High-Sensitivity Coliform Count plates may be especially well-suited for use in facilities producing dairy products, where regulations and strict internal quality standards demand a high-sensitivity test that can deliver results quickly and accurately.
This allows a 1-coliform-per-gram sensitivity if a 1:5 dilution of product is made. A 2-coliform-per-gram sensitivity is achieved if a 1:10 dilution is used. Whether testing milk, ice cream, cheese, or other food products, testing labs can benefit from the labor savings of Petrifilm Plates. These plates reduce overall testing costs and allow producers to easily conform to higher sensitivity standards.
The Petrifilm Plate Advantage
In today’s environment of heightened focus on food safety and increasingly stringent quality requirements, labs are under pressure to provide tests that are fast, reliable and consistently accurate. Petrifilm Plates have demonstrated consistent performance that has been cited globally with more than 200 certificates, recognitions, validations, and peer-review publications. For almost 40 years, food safety professionals around the world have put their trust in Petrifilm Plates. That’s because Petrifilm Plates have streamlined, standardized and simplified the process of microbial quantitative indicator testing, improving productivity and helping ensure the highest levels of product quality.
Features
- Coliform results as soon as 24 hours.
- A unique plate designed to trap the gas produce by coliforms
- Plates are sample-ready, eliminating all the time-consuming steps of preparing media/agar dishes.
- This plate has been awarded Official Methods of Analysis (OMA) #996.02 for Dairy products and NF VALIDATION certificate: Neogen® -01/7-03/99 for Human food products by AFNOR Certification.
| Brand | Petrifilm® |
| Analyte | Coliforms |
| Platform | Rapid Microbiology |
| Result Type | Quantitative |
| Approvals | This plate has been awarded Official Methods of Analysis (OMA) #996.02 for Dairy products and NF VALIDATION certificate: Neogen® -01/7-03/99 for Human food products by AFNOR Certification. |
| Time to Result | 22 – 26 Hours |
| Storage Conditions | ≤ 8°C (46°F) |
| Quantity per Package | 50 plates |
| Package Dimensions | 22.50 cm x 17.20 cm x 3.80 cm |
| Package Weight | 0.75 lb |
Petrifilm® Enterobacteriaceae Count Plates
The Neogen® Petrifilm® Enterobacteriaceae Count Plate provides results in just 24 hours, enabling you to quickly determine potential sources of contamination. Enterobacteriaceae includes all coliforms as well as potential pathogens such as Salmonella, Shigella and Yersinia.
The Petrifilm Enterobacteriaceae Count Plate can also be read using the Petrifilm Plate Reader Advanced which provides consistent, fast, automated reading and recording of results of Petrifilm Plates in 4 seconds.
The Petrifilm Plate Advantage
In today’s environment of heightened focus on food safety and increasingly stringent quality requirements, labs are under pressure to provide tests that are fast, reliable and consistently accurate. Petrifilm Plates have demonstrated consistent performance that has been cited globally with more than 200 certificates, recognitions, validations, and peer-review publications. For almost 40 years, food safety professionals around the world have put their trust in Petrifilm Plates. That’s because Petrifilm Plates have streamlined, standardized and simplified the process of microbial quantitative indicator testing, improving productivity and helping ensure the highest levels of product quality.
Features
- Enterobacteriacae results in 24 hours.
- Plates are sample-ready, eliminating all the time-consuming steps of preparing media/agar dishes.
- This plate has been awarded Official Methods of Analysis (OMA) #2003.01 for selected foods and NF VALIDATION certificate: Neogen® 01/6-09/97 for All human food products, Animal feed and Production environmental samples by AFNOR Certification.
- Can be used with the Petrifilm® Plate Reader Advanced for consistent, fast, automated reading and recording of results.
| Brand | Petrifilm® |
| Analyte | Enterobacteriaceae |
| Platform | Rapid Microbiology |
| Result Type | Quantitative |
| Approvals | This plate has been awarded Official Methods of Analysis (OMA) #2003.01 for selected foods and NF VALIDATION certificate: Neogen® 01/6-09/97 for All human food products, Animal feed and Production environmental samples by AFNOR Certification |
| Time to Result | 22 – 26 Hours |
| Storage Conditions | ≤ 8°C (46°F) |
| Quantity per Package | 50 plates |
| Package Dimensions | 19.80 cm x 16.80 cm x 3.70 cm |
| Package Weight | 0.49 lb |
Petrifilm® Yeast and Mold Plate Spreader
This spreader is specially designed for use with the Neogen® Petrifilm® Yeast and Mold Count Plates. Once the sample has been prepared, the top film is lifted from the Neogen® Petrifilm Plate to expose the inoculation area and the diluted sample is added. The technician places the film onto the sample then uses the spreader to distribute the sample. The clear acrylic construction of the spreader allows the technician to ensure proper inoculum distribution.
Features
- Design easily spreads inoculum over uniform area.
- The spreader is reusable and does not contact plating surface or sample.
- Clear acrylic material allows the technician to observe and control spread.
- Easy to use tool.
| Brand | Petrifilm® |
| Quantity per Package | 2 each |
| Package Dimensions | 10.16 cm x 7.62 cm x 0.79 cm |
| Package Weight | 0.12 lb |
Petrifilm® Yeast and Mold Count Plates
The Neogen® Petrifilm® Yeast and Mold Count Plate is a sample-ready culture medium system which contains nutrients supplemented with antibiotics, a cold-water-soluble gelling agent, and an indicator that facilitates yeast and mold enumeration. The Petrifilm Yeast and Mold Count Plates are used for the enumeration of yeast and mold in the food, beverage, and bottled water industries. The Petrifilm Yeast and Mold Count Plate provides results between 3 to 5 days. Yeasts are easily differentiated from molds on the plate:
- Yeasts are typically indicated by small, blue green colonies with defined edges and no foci.
- Molds are indicated by large, variably colored colonies with diffuse edges and center foci.
The Petrifilm Plate Advantage
In today’s environment of heightened focus on food safety and increasingly stringent quality requirements, labs are under pressure to provide tests that are fast, reliable and consistently accurate. Petrifilm Plates have demonstrated consistent performance that has been cited globally with more than 200 certificates, recognitions, validations, and peer-review publications. For almost 40 years, food safety professionals around the world have put their trust in Petrifilm Plates. That’s because Petrifilm Plates have streamlined, standardized and simplified the process of microbial quantitative indicator testing, improving productivity and helping ensure the highest levels of product quality.
Features
- Yeast and Mold results in 3-5 days.
- Plates are sample-ready, eliminating all the time-consuming steps of preparing media/agar dishes.
- This plate has been awarded AOAC® Official Methods of Analysis℠ (OMA) #997.02.
| Brand | Petrifilm® |
| Analyte | Yeast & Mold |
| Platform | Rapid Microbiology |
| Result Type | Quantitative |
| Approvals | This plate has been awarded AOAC® Official Methods of AnalysisSM (OMA) #997.02 |
| Time to Result | 3 – 5 Days |
| Storage Conditions | ≤ 8°C (46°F) |
| Quantity per Package | 100 plates |
| Package Dimensions | 19.50 cm x 17.50 cm x 4.50 cm |
| Package Weight | 0.66 lb |
Petrifilm® Plate Barcode Labels
Petrifilm® Plate Barcode Labels (4,000 per roll)
Features
- Print a generated barcode for use with the Petrifilm Plate Reader Advanced (PPRA).
- Barcode label is used to record the sample ID, dilution, and plate type.
- Connect the barcode to LIMS-compatible software.
| Brand | Petrifilm® |
| Quantity per Package | 4000 labels |
| Package Weight | 1.60 lb |
Neogen® Petrifilm® Plate Reader Advanced
The Neogen® Petrifilm® Plate Reader Advanced enumerates 11 different Neogen® Petrifilm Plates: Rapid Aerobic Count Plate, Rapid Coliform Count Plate, Rapid E. coli/Coliform Count Plate, Rapid Yeast and Mold Count Plate, Aerobic Count Plate, Coliform Count Plate, Enterobacteriaceae Count Plate, E. coli/Coliform Count Plate, Select E. coli Count Plate, Staph Express Count Plate, Staph Express Disk, and Lactic Acid Bacteria Count Plate.
Following incubation, Petrifilm Plates can be easily fed into the Petrifilm Plate Reader Advanced where each plate is imaged and enumerated via onboard fixed artificial intelligence in six secords or less. Each Petrifilm Plate artificial intelligence network was trained and validated with a wide assortment of food matrices to ensure accurate plate enumeration.
The Petrifilm Plate Manager Software utilizes a simple and streamlined user interface to collect, store, and report Petrifilm Plate results. The system recognizes 10 barcode symbologies which enables users to easily map details such as technician, food type, and dilution, rather than transcribing by hand. Results can be exported to a user’s Laboratory Information Management System (LIMS) and other reporting tools. Additionally, the Petrifilm Plate Manager Software allows users to access results from multiple PCs that are connected to a company intranet.
Enumerate
Displays your results after a Petrifilm® Plate is enumerated. Annotate your test results and create a Petrifilm Plate worklist to optimize your workflow.
Results
Test results and images are saved for review and further analysis and can be edited when needed. Calculate result totals, generate reports, or export your results from here.
Trends & Reports
View, trend, and track test data on this fully customizable dashboard. Create real-time charts that update as new test results are recorded as well as custom recurring and one-time reports for your test results.
Features
- Enumerates 11 different Petrifilm Plates in six seconds or less by utilizing onboard fixed artificial intelligence to produce accurate results and to bring more productivity into your lab
- Includes Petrifilm® Plate Manager Software to perform insightful analyses that lead to more informed decision-making
- Petrifilm® Plate Manager Software enables users to create one time/single use reports, recurring scheduled reports and real time charts. Reports have the option to trend results over time, include charts (bar, line, pie), and company logo(s).
| Brand | Petrifilm® |
| Analyte | Coliforms, E. coli, Enterobacteriaceae, Lactic Acid Bacteria, Staphylococcus aureus, Yeast & Mold, Aerobic |
| Platform | Rapid Microbiology |
| Result Type | Quantitative |
| Software Requirements | Petrifilm Plate Manager |
| Power Requirement | 110/220V |
| Item Dimensions | 8.40 in x 8.60 in x 10.10 in |
| Package Dimensions | 33.00 cm x 33.00 cm x 46.00 cm |
| Package Weight | 3.94 lb |
Petrifilm® Staph Express Disks
Used when background flora exists in your Staphylococcus testing. This disk is used to identify Staphylococcus aureus from all suspect colonies.
The Neogen® Petrifilm® Staph Express (STX) System consists of a Petrifilm® Staph Express Count (STX) Plate and a Petrifilm® Staph Express (STX) Disk, which are packaged separately.
The Petrifilm Plate Advantage
In today’s environment of heightened focus on food safety and increasingly stringent quality requirements, labs are under pressure to provide tests that are fast, reliable and consistently accurate. Petrifilm Plates have demonstrated consistent performance that has been cited globally with more than 200 certificates, recognitions, validations, and peer-review publications. For almost 40 years, food safety professionals around the world have put their trust in Petrifilm Plates. That’s because Petrifilm Plates have streamlined, standardized and simplified the process of microbial quantitative indicator testing, improving productivity and helping ensure the highest levels of product quality.
Features
- Final results between 1 to 3 hours.
- Proven cost effective tool for the detection of Staphylococcus aureus.
- Unique system to facilitate the enumeration of S. aureus
- Can be used with the Petrifilm® Plate Reader Advanced for consistent, fast, automated reading and recording of results.
- This plate has been awarded:
- AOAC® Official Method SM 2003.07
- AOAC® Official Method SM 2003.08
- AOAC® Official Method SM 2003.11
- AFNOR validated method (3M -01/9-04/03)
- NordVal Validation Ref. No.: 2003-20-5408-00019
- Compendium of Analytical Methods. Health Protection and Food Branch. Health Canada. Laboratory Procedure MFLP-21
| Brand | Petrifilm® |
| Analyte | Staphylococcus aureus |
| Platform | Rapid Microbiology |
| Approvals | This plate has been awarded: AOAC® Official Method SM 2003.07, AOAC® Official Method SM 2003.08, AOAC® Official Method SM 2003.11, AFNOR validated method (3M -01/9-04/03), NordVal Validation Ref. No.: 2003-20-5408-00019 • Compendium of Analytical Methods. Health Protection and Food Branch. Health Canada. Laboratory Procedure MFLP-21 |
| Time to Result | 0.5 – 3 Hours |
| Storage Conditions | ≤ 8°C (46°F) |
| Quantity per Package | 20 disks |
| Package Dimensions | 22.50 cm x 12.50 cm x 0.05 cm |
| Package Weight | 0.18 lb |
Petrifilm® Automated Feeder, Station Cups, 5-pk
| Brand | Petrifilm® |
| Analyte | Aerobic, E. coli, Enterobacteriaceae, Lactic Acid Bacteria, Staphylococcus aureus, Yeast & Mold, Coliforms |
| Platform | Rapid Microbiology |
| Result Type | Quantitative |
| Package Weight | 2.02 g |
Petrifilm® Staph Express Count Plates
The Neogen® Petrifilm® Staph Express (STX) System consists of a Petrifilm® Staph Express Count (STX) Plate and a Petrifilm® Staph Express (STX) Disk, which are packaged separately. The Petrifilm STX Plate is a sample ready culture medium system which contains a coldwater soluble gelling agent. The chromogenic, modified Baird Parker medium in the plate is selective and differential for Staphylococcus aureus but may also indicate Staphylococcus hyicus ( S. hyicus) or Staphylococcus intermedius ( S. intermedius). By identifying S. aureus in food and environmental samples, Petrifilm® Staph Express Count Plates give food processors an indication and risk assessment of food quality and sanitation effectiveness. Distinctive red-violet colonies appear in as little as 22 hours. The test requires only one incubation temperature and is equivalent to the BAM three plate Baird-Parker agar and tube coagulase method. The end result is better inventory management, better process control, a higher quality product and improved cost savings for your facility, all of which can lead to higher profitability.
The Petrifilm Plate Advantage
In today’s environment of heightened focus on food safety and increasingly stringent quality requirements, labs are under pressure to provide tests that are fast, reliable and consistently accurate. Petrifilm Plates have demonstrated consistent performance that has been cited globally with more than 200 certificates, recognitions, validations, and peer-review publications. For almost 40 years, food safety professionals around the world have put their trust in Petrifilm Plates. That’s because Petrifilm Plates have streamlined, standardized and simplified the process of microbial quantitative indicator testing, improving productivity and helping ensure the highest levels of product quality.
Features
- Results in 24 Hours.
- Plates are sample-ready, eliminating all the time-consuming steps of preparing media/agar dishes.
- Can be used with the Petrifilm® Plate Reader Advanced for consistent, fast, automated reading and recording of results.
- Unique system to facilitate the enumeration of S. aureus
- This plate has been awarded:
- AOAC® Official Method SM 2003.07
- AOAC® Official Method SM 2003.08
- AOAC® Official Method SM 2003.11
- AFNOR validated method (Neogen® -01/9-04/03)
- NordVal Validation Ref. No.: 2003-20-5408-00019
- Compendium of Analytical Methods. Health Protection and Food Branch. Health Canada. Laboratory Procedure MFLP-21
| Brand | Petrifilm® |
| Analyte | Staphylococcus aureus |
| Platform | Rapid Microbiology |
| Result Type | Quantitative |
| Approvals | This plate has been awarded,AOAC® Official Method SM 2003.07 ,AOAC® Official Method SM 2003.08, AOAC® Official Method SM 2003.11, AFNOR validated method (Neogen® -01/9-04/03), NordVal Validation Ref. No.: 2003-20-5408-00019. Compendium of Analytical Methods. Health Protection and Food Branch. Health Canada. Laboratory Procedure MFLP-21 |
| Time to Result | 22 – 26 Hours |
| Storage Conditions | -20 to 8°C (-4 to 46°F) |
| Quantity per Package | 50 plates |
| Package Dimensions | 19.20 cm x 17.00 cm x 4.00 cm |
| Package Weight | 0.49 lb |
Petrifilm® Rapid Yeast and Mold Count Plates
The Neogen® Petrifilm® Rapid Yeast and Mold Count Plate method is faster and provides results in as little as 48 hours of incubation time, vs. the traditional agar method that requires a five day incubation period. Yeast and molds can grow in a wide range of conditions in raw materials, finished products and production environments, making them difficult to control. This plate features a new indicator technology that makes colonies easier to interpret.
Proven as reliable as the DRBC and DG 18 spread plate methods as well as the acidified PDA and YGC agar pour plate methods, Petrifilm Rapid Yeast and Mold Count Plates also enhance productivity by eliminating the inoculation of multiple spread plates, the addition of antibiotics or tartaric acid, and the agar preparation process altogether. Faster results provide more time to monitor processes and ensure tighter process controls to support product quality. With an added foam barrier around the inoculation area makes inoculating the plates easier, making it easy to interpret results with special technology keeps mold colonies from spreading and overlapping. Petrifilm eliminates the need for the labor intensive, multiple plate spread plate technique, while providing results in as little as 48 hours of incubation for most product catagories
The Petrifilm Plate Advantage
In today’s environment of heightened focus on food safety and increasingly stringent quality requirements, labs are under pressure to provide tests that are fast, reliable and consistently accurate. Petrifilm Plates have demonstrated consistent performance that has been cited globally with more than 200 certificates, recognitions, validations, and peer-review publications. For almost 40 years, food safety professionals around the world have put their trust in Petrifilm Plates. That’s because Petrifilm Plates have streamlined, standardized and simplified the process of microbial quantitative indicator testing, improving productivity and helping ensure the highest levels of product quality.
Features
- Yeast and mold results in 48-72 hours.
- Plates are sample-ready, eliminating all the time-consuming steps of preparing media/agar dishes.
- Plates can be used for air, swab or surface contact production environmental sampling
- Special technology keeps mold colonies from spreading and overlapping
- This plate has been awarded Official Methods of Analysis (OMA) #2014.05 for Select food and NF VALIDATION certificate: Neogen® 01/13-07/14 for All human food products, Pet food, Animal feed and Production environmental samples (primary production samples excepted) by AFNOR Certification.
| Brand | Petrifilm® |
| Analyte | Yeast & Mold |
| Platform | Rapid Microbiology |
| Result Type | Quantitative |
| Approvals | This plate has been awarded Official Methods of Analysis (OMA) #2014.05 for Select food and NF VALIDATION certificate: Neogen® 01/13-07/14 for All human food products, Pet food, Animal feed and Production environmental samples (primary production samples excepted) by AFNOR Certification |
| Time to Result | 48 – 72 Hours |
| Storage Conditions | -20 to 8°C (-4 to 46°F) |
| Quantity per Package | 50 plates |
| Package Dimensions | 19.70 cm x 17.20 cm x 4.00 cm |
| Package Weight | 0.44 lb |
Petrifilm® Automated Feeder
The Neogen® Petrifilm® Automated Feeder feeds and enumerates 11 different Neogen Petrifilm Plates, plus the Staph Express Disk, into the Petrifilm Plate Reader Advanced: Rapid Aerobic Count Plate, Rapid Coliform Count Plate, Rapid E. coli/Coliform Count Plate, Rapid Yeast and Mold Count Plate, Aerobic Count Plate, Coliform Count Plate, Enterobacteriaceae Count Plate, E. coli/Coliform Count Plate, Select E. coli Count Plate, Staph Express Count Plate, Staph Express Disk, and Lactic Acid Bacteria Count Plate.
The Petrifilm Automated Feeder increases lab capacity, processing up to 300 plates in 1 minute of hands-on time and reducing technician-to-technician variability. And because every plate goes through the system, you get complete traceability of all of your lab’s results.
Designed for seamless integration, the Petrifilm Automated Feeder will automatically push results to a spreadsheet, which can be pulled into LIMS, eliminating the need for data transcription.
The Petrifilm Automated Feeder is designed for high throughput operations, including a separation station that prevents system errors, allowing the user to walk away to perform other tasks.
The Petrifilm Automated Feeder works with existing Petrifilm Plate Manager software. The software recognizes that a Petrifilm Automated Feeder is plugged in, which unlocks additional features. The user can configure how they want plates sorted into the output bins and verify Petrifilm Plate colony counts via a thumbnail image review.
Features
- Automatically feeds and enumerates up to 300 Petrifilm Plates in 33 minutes.
- Continuously pushes data into an Excel file for seamless LIMS integration, eliminating the need for data transcription.
- Separation station picks and separates plates to prevent errors.
- Dual bins allow enumerated Petrifilm Plates to be sorted.
- Compatible with Petrifilm Plate Reader Advanced and Petrifilm Plate Manager software.
| Brand | Petrifilm® |
| Analyte | Coliforms, E. coli, Enterobacteriaceae, Lactic Acid Bacteria, Staphylococcus aureus, Yeast & Mold, Aerobic |
| Platform | Rapid Microbiology |
| Result Type | Quantitative |
| Software Requirements | Petrifilm Plate Manager |
| Power Requirement | 110/220v |
| Item Dimensions | 486.00 mm x 1,182.00 mm x 781.00 mm |
| Package Weight | 243.00 lb |
Petrifilm® Standard Spreader Assembly for AC, CC and E. coli Plates
The Neogen® Petrifilm® Automated Feeder feeds and enumerates 11 different Neogen Petrifilm Plates, plus the Staph Express Disk, into the Petrifilm Plate Reader Advanced: Rapid Aerobic Count Plate, Rapid Coliform Count Plate, Rapid E. coli/Coliform Count Plate, Rapid Yeast and Mold Count Plate, Aerobic Count Plate, Coliform Count Plate, Enterobacteriaceae Count Plate, E. coli/Coliform Count Plate, Select E. coli Count Plate, Staph Express Count Plate, Staph Express Disk, and Lactic Acid Bacteria Count Plate.
The Petrifilm Automated Feeder increases lab capacity, processing up to 300 plates in 1 minute of hands-on time and reducing technician-to-technician variability. And because every plate goes through the system, you get complete traceability of all of your lab’s results.
Designed for seamless integration, the Petrifilm Automated Feeder will automatically push results to a spreadsheet, which can be pulled into LIMS, eliminating the need for data transcription.
The Petrifilm Automated Feeder is designed for high throughput operations, including a separation station that prevents system errors, allowing the user to walk away to perform other tasks.
The Petrifilm Automated Feeder works with existing Petrifilm Plate Manager software. The software recognizes that a Petrifilm Automated Feeder is plugged in, which unlocks additional features. The user can configure how they want plates sorted into the output bins and verify Petrifilm Plate colony counts via a thumbnail image review.
Features
- Automatically feeds and enumerates up to 300 Petrifilm Plates in 33 minutes.
- Continuously pushes data into an Excel file for seamless LIMS integration, eliminating the need for data transcription.
- Separation station picks and separates plates to prevent errors.
- Dual bins allow enumerated Petrifilm Plates to be sorted.
- Compatible with Petrifilm Plate Reader Advanced and Petrifilm Plate Manager software.
- Design easily spreads inoculum over uniform area.
- The spreader is reusable and does not contact plating surface or sample.
- Clear acrylic material allows the technician to observe and control spread.
- Easy to use tool.
| Brand | Petrifilm® |
| Analyte | Aerobic, E. coli, Enterobacteriaceae, Heterotrophic, Coliforms |
| Quantity per Package | 2 each |
| Package Dimensions | 7.62 cm x 5.72 cm x 0.64 cm |
| Package Weight | 113.00 g |
Petrifilm® High-Sensitivity Plate Spreader
Spreader used to distribute the sample evenly for Neogen® Petrifilm® High-Sensitivity Coliform Count Plates.
Features
- Design easily spreads inoculum over uniform area.
- The spreader is reusable and does not contact plating surface or sample.
- Clear acrylic material allows the technician to observe and control spread.
- Easy to use tool.
| Brand | Petrifilm® |
| Analyte | Coliforms |
| Quantity per Package | 2 each |
| Package Dimensions | 14.00 cm x 11.00 cm x 2.50 cm |
| Package Weight | 0.18 lb |
Petrifilm® Automated Feeder, Output Bin
| Brand | Petrifilm® |
| Analyte | Aerobic, Coliforms, E. coli, Enterobacteriaceae, Lactic Acid Bacteria, Staphylococcus aureus, Yeast & Mold |
| Platform | Rapid Microbiology |
| Result Type | Quantitative |
| Package Weight | 824.00 g |
Petrifilm® Salmonella Express Confirmation Disks
Neogen® Petrifilm® Salmonella Express (SALX) System is used for the rapid qualitative detection and biochemical confirmation of Salmonella species in enriched food and food process environmental samples. The Petrifilm SALX System consists of the Salmonella Enrichment Base, the Salmonella Enrichment Supplement, the Petrifilm® Salmonella Express (SALX) Plate, and the Petrifilm® Salmonella Express (SALX) Confirmation Disk, which are all packaged separately. The Petrifilm SALX Plate is a sample ready-to-use chromogenic culture medium system that contains a cold-water soluble gelling agent and is selective and differential for Salmonella, providing a presumptive result. The Petrifilm SALX Confirmation Disk contains a biochemical substrate that facilitates the biochemical confirmation of Salmonella organisms. The Petrifilm SALX Plate is used with or without the Petrifilm SALX Confirmation Disk. The Petrifilm SALX Confirmation Disk may be used only in conjunction with the Neogen® Petrifilm SALX Plate.
The Petrifilm Plate Advantage
In today’s environment of heightened focus on food safety and increasingly stringent quality requirements, labs are under pressure to provide tests that are fast, reliable and consistently accurate. Petrifilm Plates have demonstrated consistent performance that has been cited globally with more than 200 certificates, recognitions, validations, and peer-review publications. For almost 40 years, food safety professionals around the world have put their trust in Petrifilm Plates. That’s because Petrifilm Plates have streamlined, standardized and simplified the process of microbial quantitative indicator testing, improving productivity and helping ensure the highest levels of product quality.
Features
- Confirmation disk easily added to plate for biochemical confirmation
- Results in 4-5 hours
- Color Card that is used to help match the color of the isolated colonies on the plate to a presumptive positive Salmonella colony color or non-Salmonella colony color
- This plate has been awarded AOAC® Performance Tested Methods℠ (PTM) Certificate #061301.
| Brand | Petrifilm® |
| Analyte | Salmonella |
| Platform | Rapid Microbiology |
| Approvals | This plate has been awarded AOAC® Performance Tested Methods℠ (PTM) Certificate #061301. |
| Time to Result | 4 – 5 Hours |
| Storage Conditions | -20 to 8°C (-4 to 46°F) |
| Quantity per Package | 5 disks |
| Package Dimensions | 22.30 cm x 11.50 cm x 6.00 cm |
| Package Weight | 0.71 lb |
Petrifilm® Salmonella Express Plates
Neogen® Petrifilm® Salmonella Express (SALX) System is used for the rapid qualitative detection and biochemical confirmation of Salmonella species in enriched food and food process environmental samples. The Petrifilm SALX System consists of the Salmonella Enrichment Base, the Salmonella Enrichment Supplement, the Petrifilm® Salmonella Express (SALX) Plate, and the Petrifilm® Salmonella Express (SALX) Confirmation Disk, which are all packaged separately. The Petrifilm SALX Plate is a sample ready-to-use chromogenic culture medium system that contains a cold-water soluble gelling agent and is selective and differential for Salmonella, providing a presumptive result. The Petrifilm SALX Confirmation Disk contains a biochemical substrate that facilitates the biochemical confirmation of Salmonella organisms. The Petrifilm SALX Plate is used with or without the Petrifilm SALX Confirmation Disk. The Petrifilm SALX Confirmation Disk may be used only in conjunction with the Neogen® Petrifilm SALX Plate.
The Petrifilm Plate Advantage
In today’s environment of heightened focus on food safety and increasingly stringent quality requirements, labs are under pressure to provide tests that are fast, reliable and consistently accurate. Petrifilm Plates have demonstrated consistent performance that has been cited globally with more than 200 certificates, recognitions, validations, and peer-review publications. For almost 40 years, food safety professionals around the world have put their trust in Petrifilm Plates. That’s because Petrifilm Plates have streamlined, standardized and simplified the process of microbial quantitative indicator testing, improving productivity and helping ensure the highest levels of product quality.
Features
- The plate offers presumptive positive results for Salmonella spp. in just 40 hours for processed foods and 48 hours for unprocessed foods.
- Confirmation disc easily added to plate for biochemical confirmation, results in 4-5 hours.
- Plates are sample-ready, eliminating all the time-consuming steps of preparing media/agar dishes.
- Only one enrichment for low-background, processed foods.
- Color Card that is used to help match the color of the isolated colonies on the plate to a presumptive positive Salmonella colony color or non-Salmonella colony color
- This plate has been awarded AOAC® Performance Tested Methods℠ (PTM) Certificate #061301.
| Brand | Petrifilm® |
| Analyte | Salmonella |
| Platform | Rapid Microbiology |
| Result Type | Quantitative |
| Approvals | This plate has been awarded AOAC® Performance Tested Methods℠ (PTM) Certificate #061301. |
| Time to Result | 40 – 53 Hours |
| Storage Conditions | -20 to 8°C (-4 to 46°F) |
| Quantity per Package | 50 plates |
| Package Dimensions | 18.00 cm x 23.00 cm x 4.00 cm |
| Package Weight | 0.62 lb |
Petrifilm® Environmental Listeria Plates
The Neogen® Petrifilm® Environmental Listeria Plate is a sample-ready culture medium containing selective agents, nutrients, a cold-water-soluble gelling agent, and a chromogenic indicator that facilitates Listeria colony detection. The Petrifilm Environmental Listeria Plates were designed to analyze environmental samples. This plate is designed to analyze environmental samples and help increase the efficiency of monitoring plant sanitation. The Petrifilm® Environmental Listeria Plate provides results in just 26 to 30 hours. The presence of indicator Listeria such as Listeria innocua provides evidence that environmental conditions are suitable for the occurrence of Listeria monocytogenes. The Petrifilm® Environmental Listeria Plate detects the majority of environmental Listeria, consisting of Listeria monocytogenes, Listeria innocua, and Listeria welshimeri. L. ivanovii, L. grayi/murrayi and L. seeligeri grow but do not form typical colonies.
The Petrifilm Plate Advantage
In today’s environment of heightened focus on food safety and increasingly stringent quality requirements, labs are under pressure to provide tests that are fast, reliable and consistently accurate. Petrifilm Plates have demonstrated consistent performance that has been cited globally with more than 200 certificates, recognitions, validations, and peer-review publications. For almost 40 years, food safety professionals around the world have put their trust in Petrifilm Plates. That’s because Petrifilm Plates have streamlined, standardized and simplified the process of microbial quantitative indicator testing, improving productivity and helping ensure the highest levels of product quality.
Features
- Rapid results in 26-30 hours from sample collection.
- Unique results (qualitative, semi-quantitative and quantitative) allow identification of hot spots in plant and track progress against Listeria over time.
- No enrichment, no culture transfers
- This plate has been awarded AOAC® Performance Tested Methods℠ (PTM) Certificate #030601 for environmental sampling
| Brand | Petrifilm® |
| Analyte | Listeria |
| Platform | Rapid Microbiology |
| Result Type | Quantitative |
| Approvals | This plate has been awarded AOAC® Performance Tested Methods℠ (PTM) Certificate #030601 for environmental sampling |
| Time to Result | 26 – 30 Hours |
| Storage Conditions | ≤ 8°C (46°F) |
| Quantity per Package | 50 each |
| Package Dimensions | 22.00 cm x 17.00 cm x 3.60 cm |
| Package Weight | 0.53 lb |
Petrifilm® Rapid Coliform Count Plates
Coliform colonies may begin to appear at 6 hours of incubation as discrete yellow zones indicating colony forming units (CFUs). Presumptive coliforms may be be recorded at 14 hours. Confirmed coliforms will appear as red colonies associated with gas.
The Petrifilm Plate Advantage
In today’s environment of heightened focus on food safety and increasingly stringent quality requirements, labs are under pressure to provide tests that are fast, reliable and consistently accurate. Petrifilm Plates have demonstrated consistent performance that has been cited globally with more than 200 certificates, recognitions, validations, and peer-review publications. For almost 40 years, food safety professionals around the world have put their trust in Petrifilm Plates. That’s because Petrifilm Plates have streamlined, standardized and simplified the process of microbial quantitative indicator testing, improving productivity and helping ensure the highest levels of product quality.
Features
- Coliform colonies may begin to appear on the plate as early as 6 hours of incubation; coliform results in as early as 14 hours of incubation. See Product Instructions for details.
- Confirmed coliform results at 24 hours.
- Plates are sample-ready, eliminating all the time-consuming steps of preparing media/agar dishes.
- Contains a highly sensitive indicator which provides faster results
- This plate has been awarded Official Methods of Analysis (OMA) #2000.15 for Food and NF VALIDATION certificates: Neogen® -01/5-03/97 A for all human food products , Neogen® -01/5-03/97 B for all human food products and Neogen® -01/5-03/97 C for all human food products (except process pork products) by AFNOR Certification.
| Brand | Petrifilm® |
| Analyte | Coliforms |
| Platform | Rapid Microbiology |
| Result Type | Quantitative |
| Approvals | This plate has been awarded Official Methods of Analysis (OMA) #2000.15 for Food and NF VALIDATION certificates: Neogen® -01/5-03/97 A for all human food products , Neogen® -01/5-03/97 B for all human food products and Neogen® -01/5-03/97 C for all human food products (except process pork products) by AFNOR Certification |
| Time to Result | 14 – 26 Hours |
| Storage Conditions | ≤ 8°C (46°F) |
| Quantity per Package | 50 plates |
| Package Dimensions | 19.50 cm x 17.00 cm x 4.00 cm |
| Package Weight | 0.48 lb |
Petrifilm® Coliform Count Plates
The Neogen® Petrifilm® Coliform Count Plate provides confirmed results in just 24 hours. By eliminating subsequent confirmation steps required with most traditional reference methods, the Petrifilm Coliform Count Plates can help increase productivity and reduce overall lab costs. This plate is a sample-ready-culture medium system which contains Violet Red Bile (VRB) nutrients, a cold water soluble gelling agent, and a tetrazolium indicator that facilitates colony enumeration in food and beverage samples.
The Petrifilm Coliform Count Plate can also be read using the Petrifilm Plate Reader Advanced which provides consistent, fast, automated reading and recording of results of Petrifilm Plates in 6 seconds.
The Petrifilm Plate Advantage
In today’s environment of heightened focus on food safety and increasingly stringent quality requirements, labs are under pressure to provide tests that are fast, reliable and consistently accurate. Petrifilm Plates have demonstrated consistent performance that has been cited globally with more than 200 certificates, recognitions, validations, and peer-review publications. For almost 40 years, food safety professionals around the world have put their trust in Petrifilm Plates. That’s because Petrifilm Plates have streamlined, standardized and simplified the process of microbial quantitative indicator testing, improving productivity and helping ensure the highest levels of product quality.
| Brand | Petrifilm® |
| Analyte | Coliforms |
| Platform | Rapid Microbiology |
| Result Type | Quantitative |
| Approvals | This plate has been awarded AOAC Official Methods of Analysis (OMA) #986.33 for Milk, AOAC OMA #989.10 for dairy products and AOAC OMA #991.14 for Food. NF VALIDATION certificates: Neogen® 01/02-09/89 A for all human food products (except raw shellfish), Pet Food and Environmental samples, Neogen® 01/07-03/99 B for all human food products (except raw shellfish), and Neogen® 01/02-09/89 C for all human food products by AFNOR Certification |
| Time to Result | 22 – 26 Hours |
| Storage Conditions | 2-8°C (36-46°F) |
| Quantity per Package | 50 plates |
| Package Dimensions | 19.20 cm x 17.00 cm x 4.00 cm |
| Package Weight | 0.49 lb |
Petrifilm® Plate Reader Advanced Power Cord
The power cord supports the Neogen® Petrifilm® Plate Reader Advanced to start up the unit if connected properly: Power supply output voltage 12 Volts DC, Power supply output current 9 AMPs, Input voltage 12 volts DC and Input current 9 Amps DC
| Brand | Petrifilm® |
| Platform | Rapid Microbiology |
| Quantity per Package | 1 each |
| Package Dimensions | 18.00 cm x 30.00 cm x 8.00 cm |
| Package Weight | 0.79 lb |
Petrifilm® Select E. coli Count Plates
The Petrifilm® Select E. coli Count Plate is a sample-ready culture medium system that contains selective agents, nutrients, a cold-water-soluble gelling agent, and an indicator of glucuronidase activity, 5-bromo-4-chloro-3-indolyl-D-glucuronide (BCIG), which facilitates colony enumeration.
The Petrifilm Plate Advantage
In today’s environment of heightened focus on food safety and increasingly stringent quality requirements, labs are under pressure to provide tests that are fast, reliable and consistently accurate. Petrifilm Plates have demonstrated consistent performance that has been cited globally with more than 200 certificates, recognitions, validations, and peer-review publications. For decades, food safety professionals around the world have put their trust in Petrifilm Plates. That’s because Petrifilm Plates have streamlined, standardized and simplified the process of microbial quantitative indicator testing, improving productivity and helping ensure the highest levels of product quality.
| Brand | Petrifilm® |
| Analyte | E. coli |
| Platform | Rapid Microbiology |
| Result Type | Quantitative |
| Approvals | This plate has been awarded NF VALIDATION certificate: All human food products, Pet Food and Industrial Environmental Samples by AFNOR Certification |
| Time to Result | 22 – 26 Hours |
| Storage Conditions | ≤ 8°C (46°F) |
| Quantity per Package | 50 plates |
Petrifilm® Automated Feeder, Picker Cups, 5-pk
| Brand | Petrifilm® |
| Analyte | Coliforms, E. coli, Enterobacteriaceae, Lactic Acid Bacteria, Staphylococcus aureus, Yeast & Mold, Aerobic |
| Platform | Rapid Microbiology |
| Result Type | Quantitative |
| Package Weight | 1.69 g |
Petrifilm® Automated Feeder, Input Bin
| Brand | Petrifilm® |
| Analyte | Aerobic, Coliforms, E. coli, Enterobacteriaceae, Lactic Acid Bacteria, Staphylococcus aureus, Yeast & Mold |
| Platform | Rapid Microbiology |
| Result Type | Quantitative |
| Package Weight | 867.00 g |
Petrifilm® Automated Feeder, Filters, 4-pk
Replacement air filters for the Petrifilm Automated Feeder.
| Brand | Petrifilm® |
| Analyte | Coliforms, E. coli, Enterobacteriaceae, Lactic Acid Bacteria, Staphylococcus aureus, Yeast & Mold, Aerobic |
| Platform | Rapid Microbiology |
| Result Type | Quantitative |
| Package Weight | 1.41 g |
Petrifilm® Environmental Listeria Spreader
The Neogen® Petrifilm® Large Square Spreader is compatible with the Neogen® Petrifilm Environmental Listeria Plates. Once the sample has been prepared, the top film is lifted from the Neogen® Petrifilm Plate to expose the inoculation area and the diluted sample is added. The technician places the film onto the sample then uses the spreader to distribute the sample. The clear acrylic construction of the spreader allows the technician to ensure proper inoculum distribution.
| Brand | Petrifilm® |
| Quantity per Package | 2 each |
| Package Dimensions | 12.00 cm x 8.00 cm x 3.00 cm |
| Package Weight | 0.09 lb |
Petrifilm® Flat Spreader
This spreader is compatible with the following Neogen® Petrifilm® Plates: Staph Express Count, Rapid Yeast and Mold, Salmonella Express System, Rapid Aerobic Count, Lactic Acid Bacteria Count, Rapid E.coli/Coliform Plates. Once the sample has been prepared, the top film is lifted from the Neogen® Petrifilm Plate to expose the inoculation area and the diluted sample is added. The technician places the film onto the sample then uses the spreader to distribute the sample. The clear acrylic construction of the spreader allows the technician to ensure proper inoculum distribution.
- Design easily spreads inoculum over uniform area.
- The spreader is reusable and does not contact plating surface or sample.
- Clear acrylic material allows the technician to observe and control spread.
- Easy to use tool.
| Brand | Petrifilm® |
| Analyte | Listeria |
| Quantity per Package | 2 each |
| Package Dimensions | 15.00 cm x 11.00 cm x 3.00 cm |
| Package Weight | 0.18 lb |
