Blender Bags with Culture Media
instaBAG MILK
instaBAG Fraser ½
instaBAG Fraser ½
instaBAG MILK
Filter bag with dehydrated media
Ref. 115 022 (225 g)
Ref. 115 090 (900 g)
Ref. 115 225 (2250 g)
Ref. 115 337 (3375 g)
instaBAG MILK is a filter bag with a pre-measured bag of milk powder that allows you to instantly perform a 2-in-1 operation: preparation of your medium and preparation of your sample for microbiological analysis. It is ideal for the analysis of chocolate products.
- Filter bag with dehydrated pre-dosed media
- Type of dehydrated media: French milk powder from Normandy
- Filter porosity: < 250 micrometers
- Compatible with any laboratory blender
| instaBAG MILK 225 | instaBAG MILK 900 | instaBAG MILK 2250 | instaBAG MILK 3375 | |
| Reference | 115 022 | 115 090 | 115 225 | 115 337 |
| Ideal | For pipetting | |||
| Precut for pipetting | N | N | ||
| Marking zone | N | |||
| Voume index | N | |||
| Max blending volume | 400 mL | 2000 mL | 3500 mL | 3500 mL |
| Type of bag | Bag with lateral non-woven filter | |||
| Bag composition | Multilayer: multicoated reinforced complex | |||
| Type of filter | Non-woven | |||
| Filter porosity | < 250 micrometers | |||
| Type of dehydrated media | Skimmed milk powder | |||
| Weight of dehydrated media | 21.8 g | 87.4 g | 218.4 g | 327.7 g |
| Sample weight | 25 g (± 5 %) | 100 g (± 5 %) | 250 g (± 5 %) | 375 g (± 5 %) |
| Composition for 1 L media | Total fat: 0.8 g of which saturated fatty acid: 0.5 g Carbohydrates: 52 g Proteins: 36 g Salt: 1.1 g Sodium : 0.42 g Mineral salts: 7.8 g Calcium: 1230 mg 100 g of powder + 930 mL of water gives 1L of skimmed milk (100 g/L) | |||
| Volume of water to be added | 203.2 mL (± 2 %) | 812.6 mL (± 2 %) | 2031 mL (± 2 %) | 3047 mL (± 2 %) |
| Blending time | 3 minutes | |||
| Bag dimensions | 190 x 300 mm | 250 x 380 mm | 380 x 600 mm | 380 x 600 mm |
| Gamma ray treated | 25 to 45 kGy | |||
| Average shelf-life | 12 months | |||
| In compliance with | ISO 7218, ISO 6887 and FDA BAM (Bacteriological Analytical Manual) | |||
| Approved for food contact | Regulation (EC) N° 1935/2004 | |||
| Storage conditions | Room temperature (+ 15°C to + 25°C). Close the pouch after opening to avoid humidity | |||
| Box (w x d x h) | 38.5 x 28.5 x 25 cm | 38.5 x 28.5 x 25 cm | 48.5 x 38.5 x 25 cm | 48.5 x 38.5 x 25 cm |
| Gross weight | 4.95 kg | 5.50 kg | 9.40 kg | 8.85 kg |
| Aluminium pouch of | 10 bags | 5 bags | 5 bags | 5 bags |
| Box of | 120 bags | 40 bags | 30 bags | 20 bags |
Your diluent ready in minutes!
instaBAG MILK is a filter bag with a pre-measured sachet of milk powder. Add a sample, dilute, blend: your sample is ready for analysis.
1. Place the sample in instaBAG
2. Add sterile and warm purified water
3. Blend the instaBAG with the BagMixer
The filtrate is ready to be pipetted
Just add warm water
The pre-dosed milk powder bag is directly integrated into the bag. Simply add a sample and warm purified sterile water. The milk powder dissolves completely during mixing. Preparation is immediate.
The pre-dosed dehydrated medium is French milk powder from Normandy. instaBAG MILK can therefore be used for the analysis of chocolate products: cocoa powders, chocolate bars and various finished chocolate products.
instaBAG MILK is available in 225, 900, 2250 and 3375 g.
The advantages of a filter bag
Filtration is done during blending. There is no need to wait for sedimentation of the debris to pipet.
The filtrate is particle-free, so there is no debris on the Petri dish. Reading is thus facilitated and the results more accurate.
No blocked pipet from particles
Debris free
Applications
instaBAG MILK is used in the food industry and public institutes for the analysis of chocolate products (cocoa powder, chocolate bars…). According to ISO 6887-4, the use of UHT milk or reconstituted skimmed milk powder (100 g/L of water, sterilized after reconstitution) is recommended as a pre-enrichment media to detect pathogens as Salmonella spp. and STEC.
instaBAG – Filter blender bag with dehydrated media : Overview
instaBAG BPW
instaBAG BPW
Filter bag with dehydrated media
Ref. 114 090 (BPW 90 mL)
Ref. 114 225 (BPW 225 mL)
instaBAG is a ready-to-use filter bag which includes a dehydrated pre-dosed media, allowing a 2-in-1 process: media preparation and sample preparation for microbiological analyses.
- Filter bag with dehydrated pre-dosed media
- Type of dehydrated media: buffered peptone water
- Filter porosity: < 250 micrometers
- Compatible with any laboratory blender
SPECIFICATIONS
| instaBAG BPW 90 | instaBAG BPW 225 | |
| Reference | 114 090 | 114 225 |
| Ideal | For pipetting | |
| Precut for pipetting | ✔ | ✔ |
| Marking zone | ✔ | ✔ |
| Voume index | ✔ | ✔ |
| Type of bag | Bag with lateral non-woven filter | |
| Bag composition | Multilayer: multicoated reinforced complex | |
| Type of filter | Non-woven | |
| Filter porosity | < 250 micrometers | |
| Type of dehydrated media | Buffered peptone water | |
| Weight of dehydrated media | 1.8 g | 4.5 g |
| Sample weight | 10 g (± 5 %) | 25 g (± 5 %) |
| Composition for 1 L media | Peptone: 10.0 g ; Sodium chloride: 5.0 g ; Anhydous disodium phosphate: 3.6 g ; Monopotassium phosphate: 1.5 g | |
| Volume of water to be added | 90 mL (± 2 %) | 225 mL (± 2 %) |
| Blending time | 1 minute | |
| Bag dimensions | 190 x 300 mm | |
| Gamma ray treated | 10 to 25 kGy | |
| Average shelf-life | 24 months | |
| In compliance with | ISO 11133, ISO 11290-2, ISO 21528, ISO 7218, ISO 6579, ISO 6887 and FDA BAM (Bacteriological Analytical Manual) | |
| Approved for food contact | Regulation (EC) N° 1935/2004 | |
| Storage conditions | Room temperature (+ 6°C à + 30°C). Close the pouch after opening to avoid humidity | |
| Box (w x d x h) | 34 x 28 x 11 cm | 34 x 28 x 11 cm |
| Gross weight | 1.79 kg | 1.7 kg |
| Aluminium pouch of | 10 bags | 10 bags |
| Box of | 100 bags | 100 bags |
Your diluent ready in minutes!
instaBAG is a filter bag which includes a dehydrated pre-dosed media, allowing a 2-in-1 process. Skip the time-consuming media preparation.
1. Place the sample in instaBAG
2. Add sterile and purified water
3. Blend the instaBAG with the BagMixer
The filtrate is ready to be pipetted
Just add water
Ready-to-use bag with pre-dosed dehydrated media in the bag. Just add the sample and sterile and purified water. The diluent dissolves itself during blending.
The dehydrated media is buffered peptone water. instaBAG can therefore be used to dilute any sample to count all microorganisms.
instaBAG is available in BPW 90 mL and 225 mL.
The advantages of a filter bag
Filtration is done during blending. There is no need to wait for sedimentation of the debris to pipet.
The filtrate is particle-free, so there is no debris on the Petri dish. Reading is thus facilitated and the results more accurate.
No blocked pipet from particles
Debris free
Applications
instaBAG is used in the food industry and public institute research. It adapts itself to every step of sample preparation. instaBAG is used to perform sample dilutions for enumeration of all microorganisms (ISO 6887). It is also used for non-selective pre-enrichment for the detection of Salmonella spp (ISO 6579) and Enterobacteria (ISO 21528-1).
instaBAG – Filter blender bag with dehydrated media : Overview
instaBAG Fraser ½
instaBAG Fraser ½
Filter bag with dehydrated media
Ref 114 220 (Fraser ½ 225 mL)
instaBAG is a ready-to-use filter bag which includes a dehydrated pre-dosed media, allowing a 2-in-1 process: media preparation and sample preparation for microbiological analyses. Fraser ½ is used as a medium for primary selective enrichment for the detection and enumeration of Listeria monocytogenes.
- Filter bag with dehydrated pre-dosed media
- Type of dehydrated media: supplemented Fraser ½
- Filter porosity: < 250 micrometers
- Compatible with any laboratory blender
SPECIFICATIONS
| instaBAG Fraser ½ | |
| Reference | 114 220 |
| Ideal | For pipetting |
| Precut for pipetting | ✔ |
| Marking zone | ✔ |
| Voume index | ✔ |
| Type of bag | Bag with lateral non-woven filter |
| Bag composition | Multilayer: multicoated reinforced complex |
| Type of filter | Non-woven |
| Filter porosity | < 250 micrometers |
| Type of dehydrated media | Supplemented Fraser ½ |
| Weight of dehydrated media | 13 g |
| Sample weight | 25 g (± 5 %) |
| Composition for 1 L media | Enzymatic digest of animal tissues: 5,0 g – Casein enzymatic digest: 5,0 g – Meat extract: 5.0 g – Yeast extract: 5.0 g – Sodium chloride: 20.0 g – Dissodium hydrogen phosphate dihydrate: 12.0 g – Potassium dihydrogen phosphate: 1.35 g – Esculine: 1.0 g – Lithium chloride: 3.0 g – Sodium salt of nalidixic acid: 0.01 g – Acriflavine hydrochloride: 0.0125 g – Iron (III) ammoniacal citrate: 0.5 g |
| Volume of water to be added | 225 mL (± 2 %) |
| Blending time | 2 minutes |
| Bag dimensions | 190 x 300 mm |
| Gamma ray treated | 10 to 25 kGy |
| Average shelf-life | 12 months |
| In compliance with | ISO 11133, ISO 11290-2, ISO 7218, ISO 6887 and FDA BAM (Bacteriological Analytical Manual) |
| Approved for food contact | Regulation (EC) N° 1935/2004 |
| Storage conditions | Room temperature (+ 10°C to + 30°C). Close the pouch after opening to avoid humidity |
| Box (w x d x h) | 37 x 29 x 12 cm |
| Gross weight | 2.25 kg |
| Aluminium pouch of | 10 bags |
| Box of | 80 bags |
Your diluent ready in minutes!
instaBAG is a filter bag which includes a dehydrated pre-dosed media (supplemented Fraser ½), allowing a 2-in-1 process. Skip the time-consuming media preparation.
1. Place the sample in instaBAG
2. Add sterile and purified water
3. Blend the instaBAG with the BagMixer
The filtrate is ready to be pipetted
Just add water
Ready-to-use bag with pre-dosed dehydrated media is integrated in the bag. Just add the sample and sterile and purified water. The diluent dissolves itself during blending.
Ideal for Listeria analyses
The pre-dosed dehydrated media is supplemented Fraser ½. instaBAG Fraser ½ is used for primary selective enrichment or as a diluent for the detection and enumeration of Listeria monocytogenes and Listeria spp. (ISO 11290-1, ISO 11290-2) in food and environmental samples.
The advantages of a filter bag
Filtration is done during blending. There is no need to wait for sedimentation of the debris to pipet.
The filtrate is particle-free, so there is no debris on the Petri dish. Reading is thus facilitated and the results more accurate.
No blocked pipet from particles
Debris free
Applications
instaBAG supplemented Fraser ½ is used in the food industry and public institutes research. In Fraser, it allows the suspension of solid samples of 25 g diluted at 1/10th for the detection of Listeria monocytogenes. This selective media is already supplemented and ready-to-use. It is validated according to ISO 11133.
instaBAG – Filter blender bag with dehydrated media : Overview
