Benchmark Scientific Vortex Mixers
VORNADO™ MINI VORTEX MIXER SERIES
Powerful is the best word to describe this mini vortexer. With a 4 mm orbit and fixed speed of 2800rpm, the Vornado instantly vortexes even the largest samples, including nearly full 50 ml tubes. Despite its powerful motor, the Vornado has a footprint of less than 4×4 inches, allowing it to fit on even the most crowded bench.
lnsta-Touch operation means that the motor is automatically activated with slight pressure on the center cup head. Operation is smooth, quiet and efficient. When pressure is removed, operation immediately ceases.
The Vornado’s unique head design prevents liquids from entering the housing,
prolonging motor life. The unit is available with five different cup head colors.
· Powerful vortexing for tubes up to 50ml
· Inst-Touch™ pressure activated operation
· “Mini Sized”, less than 4 in. wide
· Available in 5 colors
| Speed | 2800rpm | |
| Motor Activation | Touch | |
| Orbit | 4mm | |
| Dimensions (WxDxH) | 3.7 x 3.9 x 2.6 | |
| Dimensions (cm) | 9.4 x 9.9 x 6.6 | |
| Operating Temp. | +4 to 45°C | |
| Weight | 1lb (0.4kg) | |
| Electrical | 100-240V 50-60Hz; 50W | |
| Warranty | 2 Years |
BENCHMIXER™ VORTEXER MIXER
The BenchMixer™ sets the new standard in vortex mixing. With advanced Q-Drive™ technology, the BenchMixer provides smooth instant vortexing of even the largest sample sizes, including full 50ml tubes. The unique counter-balance system creates maximum vortexing action, while minimizing noise and excessive vibration. This results in quieter, more efficient and longer lasting operation.Other features include: “no-walk” suction feet, cold room/incubator compatibility and spill-proof electronic controls.
· Powerful motor for INSTANT vortexing
· Continuous or “touch” operation
· Q-Drive™ dynamic balancing system
· Variable speed from 200 to 3200 rpm
· Wide variety of accessories
| Speed Range | 200 – 3200 rpm | |
| Operating Modes | Touch or Continuous | |
| Orbit | 3mm | |
| Dimensions (in): | 5 x 6.3 x 6.7 | |
| Dimensions (cm) | 13 x 16 x 17 | |
| Operating Temp. | +4 to 45°C | |
| Weight | 8.4lbs (3.8kg) | |
| Electrical | 115V 60Hz or 230V 50Hz; 180W | |
| Warranty | 2 years |
BENCHMIXER V2, VORTEX MIXER WITH FLIP TOP CUP HEAD
The BenchMixer™ V2 utilizes a smooth and powerful mixing technology similar to the original BenchMixer, with the advantage of a uniquely designed reversible rubber head that can be attached to the mixer in two orientations. For the vortexing of single tubes, the cupped surface would generally be preferred.
However, for applications requiring a flat/dimpled surface for mixing uniquely shaped vessels (or a handful of multiple test-tubes), the head can easily be flipped over and reattached in reverse orientation.
Like the original BenchMixer, the drive system is balanced with Q-Drive™ technology, providing a smooth vortexing action, while minimizing noise and excessive vibration. This results in quieter, more efficient and longer lasting operation. With a maximum speed up to 3,200 rpm, the mixer provides an instant vortex of even the largest sample sizes, including full 50ml tubes.
· Reversible top platform, cup or flat-dimpled surface
· Powerful motor for INSTANT vortexing
· Continuous or “touch” operation
· Q-Drive™ dynamic balancing system
· Variable speed from 200 to 3200 rpm
· Wide variety of accessories, for tubes up to 50ml
| Speed Range | 200 – 3200 rpm | |
| Operating Modes | Touch or Continuous | |
| Orbit | 3mm | |
| Dimensions (in) | 5 x 6.3 x 6.7 | |
| Dimensions (cm) | 13 x 16 x 17 | |
| Operating Temp. | +4 to 45°C | |
| Weight | 8.4lbs (3.8kg) | |
| Electrical | 115V 60Hz or 230V 50Hz; 180W | |
| Warranty | 2 years |
MORTEXER™ VORTEX MIXER
The Mortexer™ is MORE than your standard vortex mixer. The unique design of the Multi-Head™ (included) features a traditional cup head for general purpose mixing, plus holds up to eight microcentrifuge tubes.
The drive system is balanced with Q-Drive™ technology, providing a smooth vortexing action, while minimizing noise and excessive vibration. This results in quieter, more efficient and longer lasting operation. Increased speed, up to 3200 rpm produces an instant vortex of even the largest sample sizes, including full 50ml tubes.
Other features include: “no-walk” suction feet, cold room/incubator compatibility and spill-proof electronic controls. Two year warranty.
· Unique Multi-Head™ for general purpose vortexing PLUS holds up to eight microtubes (Patent Pending)
· Powerful motor for INSTANT vortexing
· Continuous or “touch” operation
· Q-Drive™ dynamic balancing system
· Variable speed from 200 to 3200 rpm
· Wide variety of accessories
| Speed Range | 200 – 3200 rpm | |
| Operating Modes | Touch or Continuous | |
| Orbit | 3mm | |
| Dimensions (in) | 5 x 6.3 x 6.7 | |
| Dimensions (cm) | 13 x 16 x 17 | |
| Operating Temp. | +4 to 45°C | |
| Weight | 8.4lbs (3.8kg) | |
| Electrical | 115V 60Hz or 230V 50Hz; 180W | |
| Warranty | 2 years |
BENCHMIXER™ XL MULTI-TUBE VORTEXER, INCLUDES 50X12MM TUBE RACK
The BenchMixer™ XL is a heavy-duty vortex mixer designed to facilitate hands-free mixing in tubes, flasks, vials or cylinders. It is ideal for the QuEChERS pesticide analysis method and is instantly adaptable to an exceptionally broad range of vessels, racks and applications (horizontal or vertical).
The precisely balanced drive system includes an oversized motor that delivers accurate, reproducible speeds up to 2500rpm with rattle-free operation and minimal vibration. The programmable pulsing function allows for time specific interval mixing, increasing agitation.
The 7×12 inch platform accommodates a wide variety of standard, pre-drilled tube racks.
Additionally, BenchMixer XL can easily be adapted to almost any type of vessel commonly found in the laboratory (contact us for details).
Using the BenchMixer XL is easy; after loading the sample rack and tightening the locking knobs, select the desired speed and run time on the large digital control panel. Then, simply press “Start” and the BenchMixer XL will perform unattended mixing for up to 100 hours.
BenchMixer XL’s large capacity and adaptability make it an ideal choice for the medium to high throughput laboratory.
- Hands-free, high capacity vortexing
- Up to 2500rpm, a true vortex in every tube
- Assortment of accessories for a variety of tubes, flasks & plates
- Pulsing program for interval mixing
- Fits almost any tube rack
| Speed Range | 500 -2500 rpm | |
| Timer | 1 min. to 99 hr. 59 min. | |
| Orbit | 3.6mm | |
| Dimensions (in) | 15 x 9.2 x 16.5 | |
| Dimensions (cm) | 38.5 x 23.5 x 42 | |
| Platform Dims | 12 x 7 in. / 30 x 17.8 cm | |
| Weight | 29lbs (13kg) | |
| Electrical | 100 to 240V 50-60Hz; 60W | |
| Warranty | 2 years |
BENCHMIXER XLQ MULT-TUBE VORTEXER FOR QUECHERS
Benchmark’s BenchMixer XLQ Multitube Vortexer been designed for use in QuEChERS and other sample prep methods. Supplied with racks for 50ml tubes held horizontally and 15ml and 1.5/2.0ml tubes held vertically, it takes the place of traditional manual shaking in these applications.
Multiple samples can be processed simultaneously in the BenchMixer XLQ’s large capacity racks, saving time and preventing operator fatigue. The vigorous, consistent shaking ensures all samples are exposed to identical conditions within the same batch of samples, as well as between batches.
The BenchMixer XLQ creates a true vortex in vertical sample racks by holding the top of the tube stationary while the bottom rotates in a 3.6mm orbit. Time and speed are precisely controlled by the digital microprocessor. A pulse mode allows for more vigorous mixing. Quiet operation, minimal vibration and a long service life are guaranteed by the precisely balanced drive system and powerful motor.
Using the BenchMixer XLQ is simple. To load the sample racks, loosen the knobs on the stationary steel rods and raise the top sample plate. One rod is shorter than the other, allowing the plate to be lifted up and swiveled to one side. After samples are loaded, lower the plate into place and tighten the knobs. Select the desired speed and run time on the digital control panel and press start. The BenchMixer XLQ can perform unattended mixing for as little as 1 minute or up to 100 hours.
While the BenchMixer XLQ is configured primarily for QuEChERS protocols, additional racks are available to accommodate nearly any type of vessel commonly found in the laboratory (ask for details). Built for heavy-duty use, the instrument carries a 2 year warranty.
- For use with QuEChERS and other sample prep methods
- Powerful, hands-free shaking/vortexing
- Pulsing program for interval mixing
- Supplied with QuEChERS rack starter kit: 7 x 50ml tubes, held horizontally 50 x 15ml tubes, held vertically 50 x 1.5/2.0ml tubes, held vertically</l
| Speed Range | 500 -2500 rpm | |
| Timer | 1 min. to 99 hr. 59 min. | |
| Orbit | 3.6mm | |
| Dimensions (in) | 15 x 9.2 x 16.5 | |
| Dimensions (cm) | 38.5 x 23.5 x 42 | |
| Platform Dimensions | 12 x 7 in. / 30 x 17.8 cm | |
| Weight | 29lbs (13kg) | |
| Electrical | 100 to 240V 50-60Hz; 60W | |
| Warranty | 2 years |
