HANNA Temperature Testers
- ORP Testers
- TDS Testers
- Multiparameter Testers
- Temperature Testers
- Application Specific
Hanna Instruments introduced the first Checktemp® thermometers that incorporated a unique calibration check feature used to determine any drift of the internal electronics. A switch was used to place the thermometer in CAL Check mode. If the reading is inside +/- 0.3 °C from the 0.0 °C reference point then the internal electronics are working correctly. Today’s meters do the check at start up to know if the meter is working properly.
The range of testers available include stick style, folding probes, and weighted probes. We offer both thermistor and K-Type thermocouple technology based on the measurement range needed. Many meters have CAL Check, a certificate stating the accuracy that is traceable to a NIST standard, automatic shut off, and wake on motion. We also offer versions that are EN 13485 certified.
The HI151 Checktemp® 4 is a folding thermistor thermometer that can measure temperature up to 300 °C (572 °F). These thermometers offer many advanced features including CAL-Check for an internal verification of the electronics and a motion sensor which eliminates the need of closing and reopening the probe when the meter enters a power saving mode. The Checktemp 4 is available in six different colors which can be assigned to different products to avoid cross contamination in the restaurant, kitchen or production facility.
- CAL Check to verify meter performance
- Waterproof to IP67 Standards
- Wake on motion
Ergonomic Design with Rubberized Grip
Checktemp® 4 has an ergonomic design that fits comfortably in the hand. The meter uses vulcanized rubber that is available in 6 different colors for a non-slip grip.
Waterproof Durable Casing
The Checktemp thermometer is completely waterproof to IP67 standards. The IP67 standard is for continuous immersion in water up to 1 meter (3′) in depth. The meters will actually float if accidentally dropped into a pot, vat or any other container.
Penetration Probe
The sharp, AISI 316 stainless steel probe is ideal for testing fresh, cooked and semi frozen food. The NTC thermistor is located in the sensing tip and allows for the measurement of food that is 2 cm (0.79″) thick.
Instrument Quality Certificate for Traceability
HI151 is calibrated to five points (-20.0, 0.0, 25.0, 60.0 and 120.0 oC) and tested at three points using reference meters, the accuracy of which is traceable to NIST in the USA or an internationally acceptable national physical standards. Each meter is serialized and supplied with an instrument quality certificate
CAL-Check
With all thermometers there is drift in the electronics over time. Every time the thermometer is switched ON the LCD will display “CAL” then “-0-”, indicating that the factory calibration has been verified and the thermometer is ready for use.
Wake on Motion Sensor
The meter has an adjustable power save mode that can be disabled. The power save mode can be programmed to turn the display off and conserve power after 1, 2, 8, or 60 minutes. The built-in motion sensor detects when the meter is picked up and automatically turns the display back on.
Checktemp®4 Temperature Tester – HI151
SKU | HI151-web |
Product Name | Checktemp® 4 Folding Thermometer – HI151 |
Quote Required | Yes |
Thermistor Temperature Range | -50.0 to 300 °C / -58.0 to 572 °F |
Thermistor Temperature Resolution | 0.1 °C (-50.0 to 199.9 °C); 1 °C (200 to 300 °C) |
Thermistor Temperature Accuracy | ± 0.2 °C (-30.0 to 170.0 °C); ± 0.4 °C (-50.0 to -30.0 °C and 170.0 to 199.9 °C); ± 1 °C (200 to 300 °C) ± 1 digit |
Automatic Shut-Off | power save settings |
Battery Type/Life | CR2032 3V x 2 pcs. / approx. 4000 hours of use |
Environment | -20.0 to 50.0 ºC (-4.0 to 122.0 ºF) |
Dimensions | 165 x 45 x 24 mm (6.5 x 1.8 x 0.9”) |
Weight | 85 g (3.0 oz) |
Ordering Information | HI151 Checktemp 4 is supplied with batteries, quality certificate, and instruction manual. |
The HI 98501 Checktemp® is a digital thermometer with stainless steel penetration probe. It delivers high accuracy temperature measurements over a wide temperature range without worrying about breakage or condensation.
The Checktemp® offers NO breakage, NO waste, NO injuries and NO difficulty in reading; the digital display prevents a parallax error (observing the wrong measurement due to the angle of view) and is optimized for a wide range of environmental temperatures. Checktemp® is provided with Hanna’s unique CAL Check™ function for accurate measurements every time. The Checktemp® implements a CAL Check™ upon startup and reports the status as 0 or Err.
The sharp-tip probe of the Checktemp® easily penetrates semi-solid products making routine temperature checks simple and quick for both incoming and outgoing goods. Checktemp® is the ideal instrument for measuring temperature according to HACCP requirements.
Features at-a-glance:
- ±0.2°C (±0.5°F) – Accuracy
- Most accurate temperature tester in the world
- CAL Check™ – Automatically verifies calibration at startup
- °C/°F Status – User selectable
- Large display with wide environmental temperature range and viewing angle.
- IP 65 water resistant protection
- HACCP Compatible – Use as a tool for control in HACCP analysis
- AISI 316 stainless steel penetration Probe
- 3000 hours of battery life (Continuous use)
- Auto-Off (select from 8 min., 60 min., or turn the feature off)
SKU | HI98501 |
Product Name | Checktemp® Digital Thermometer – HI98501 |
Quote Required | Yes |
Temperature Range | -50.0 to 150.0 ºC / -58.0 to 302 ºF |
Temperature Resolution | 0.1 ºC (-50.0 to 150.0 ºC) |
Temperature Accuracy | ±0.2 ºC (-30.0 to 120.0 ºC) |
Automatic Shut-Off | 8 min (default), 60 min or OFF |
Battery Type/Life | 1 x CR2032; approx. 2000 hours of continuous use |
Environment | -30 to 50 ºC (-22 to 122 ºF) |
Dimensions | 50 x 185 x 21 mm (2 x 7.3 x 0.9“) |
Weight | 50 g (1.8 oz.) |
Notes | Certi‑cation |
The Checktemp® 1 Digital Thermometer – HI98509 is a high-accuracy thermometer with a 1 m (3.3’) flexible, silicone cable connecting the meter and the stainless steel probe. The sharp-tip penetration probe easily lances semi-solid products such as fruits, vegetables, and cheeses. This probe can also handle liquid, air and measurements in frozen materials. The probe incorporates an NTC thermistor sensor to measure the temperature.
Thermistors make it possible to obtain extremely high accuracy in a very short period of time. The Hanna CAL Check™ feature has been incorporated into the Checktemp®1 for reliable and accurate measurements. CAL Check™ automatically runs a self-check upon startup and reports status back to the user; “-0-” for ok and “Err” if something is wrong.
Checktemp®1 makes routine controls fast and simple for both incoming and outgoing goods. Constructed of AISI 316 stainless steel material, this probe is in compliance with food regulations, making it an ideal instrument for measuring temperature according to HACCP requirements.
Features at-a-glance:
- ±0.2°C (±0.5°F) – Accuracy
- Most accurate temperature tester in the world
- CAL Check™ – Automatically verifies calibration at startup
- Silicone probe cable – 3.3’ silicone cable maintains flexibility and performance
- °C/°F Status – User selectable
- Large display with wide environmental temperature range and viewing angle.
- IP 65 water resistant protection
- HACCP Compatible – Use as a tool for control in HACCP analysis
- AISI 316 stainless steel penetration Probe
- Auto-Off (select from 8 min., 60 min., or turn the feature off)
SKU | HI98509 |
Product Name | Checktemp® 1 Digital Thermometer – HI98509 |
Quote Required | Yes |
Temperature Range | -50.0 to 150.0 ºC / -58.0 to 302 ºF |
Temperature Resolution | 0.1 ºC (-50.0 to 150.0 ºC) |
Temperature Accuracy | ±0.2 ºC (-30.0 to 120.0 ºC) |
Temperature Probe | stainless steel, 1 m (3.3′) cable |
Automatic Shut-Off | 8 min (default), 60 min or OFF |
Battery Type/Life | 3 x 1.5 V AAA alkaline; approx. 2 years |
Environment | -30 to 50 ºC (-22 to 122 ºF) |
Dimensions | 107 x 59 x 17 mm (4.2 x 5.3 x 0.7″) |
Weight | 130 g (4.6 oz. |
Notes | Certi‑cation |
The HI147 is a remote temperature ideal for monitoring in food care environments.
It contains magnets for easy placement on a metal surface and delivers high accuracy measurements over a wide temperature range. The thermometer’s unique CAL Check™ feature allows for an internal calibration of the device with the flick of a switch, thereby alleviating the time preparing an ice bath.
Features at-a-glance
CAL Check™ – The thermometer’s unique CAL Check™ feature allows for an internal calibration of the device with the flick of a switch, thereby alleviating the time preparing an ice bath.
Magnetized – Two magnets located on the back of the device all for easy placement on the outside of a refrigerator or metal cabinet.
Food Compatible Cable – The thermometer is specially designed with a food compatible cable for continuous monitoring of temperature in food care environm
SKU | HI147-web |
Product Name | Checkfridge™ Remote Sensor Thermometer – HI147 |
Quote Required | Yes |
Temperature Range | HI147-00 -50.0 to 150.0°C |
Temperature Resolution | HI147-00 0.1°C |
Temperature Accuracy | HI147-00 ±0.3°C (-20 to 90°C); ±0.5°C (outside) |
Battery Type/Life | 1.5V AAA / approximately 3 years of continuous use |
Environment | 0 to 50°C (32 to 122°F); RH max 95% |
Dimensions | 93 x 39 x 31 mm (3.7 x 1.5 x 1.2’’) |
Weight | 60 g (2.1 oz.) |
Ordering Information | HI147 is supplied with battery and instructions. |
The Checktemp Dip Digital Thermometer is a high-accuracy NTC thermistor thermometer connected to a weighted, stainless steel probe by a 3 m (9.9’) flexible, silicone cable.
The weighted, stainless steel probe is designed to measure temperature in tanks, vats, streams, and lakes. Attached to the meter by 3 m of cable, the probe is capable of taking temperature readings at various depths. The probe is made of AISI 316 stainless steel which makes it easy to clean and ideal for temperature measurement in a variety of food and beverage applications such as in wine casks or milk storage tanks.
The HI98539 Checktemp Dip is equipped with Hanna’s exclusive CAL Check® feature for reliable and accurate measurements. CAL Check automatically runs a self-check upon startup and looks for any drift in the internal electronics. The Checktemp Dip then reports the instruments status back to the user in a matter of seconds; 0 for ok and Err if something is wrong.
Features at-a-glance:
- ±0.3°C (±0.5°F) Accuracy
- CAL Check™ – Automatically verifies calibration at startup
- 3 m (9.9’) silicone cable
- °C/°F readout – User selectable
- Clear LCD display that is easy to read
- IP 65 water resistant protection
- HACCP Compatible – Use as a tool for control in HACCP analysis
- AISI 316 stainless steel weighted probe
- User-selectable auto-off (select from 8 min., 60 min., or disable)
SKU | HI98539 |
Product Name | Checktemp Dip Digital Thermometer – HI98539 |
Quote Required | Yes |
Thermistor Temperature Range | -20.0 to 80.0°C/ -4.0 to 176.0°F |
Thermistor Temperature Resolution | 0.1°C/ 0.1°F |
Thermistor Temperature Accuracy | ±0.3°C/ ±0.5 ºF |
Automatic Shut-Off | 8 min (default), 60 min or OFF |
Battery Type/Life | 3 x 1.5V AAA Batteries/Approximately 2 years of use |
Environment | -30 to 50°C (-22 to 122°F); RH max 95%; IP65 |
Dimensions | 107 x 59 x 17 mm (4.2 x 2.3 x 0.7’’) |
Weight | 109 g (3.8 oz.) |
Ordering Information | HI98539 (Checktemp Dip) is supplied with weighted stainless steel probe, 3 m (9.9’) silicone cable, batteries, and instructions. |
HI145 thermometers were developed for HACCP programs that require high standards of performance with simplicity of use. The durable T-shaped handle fits comfortably in hand and is ideal for applications where applied force is necessary for insertion, such as with incoming meat inspection and semi-frozen foods. The LCD positioned on top of the meter allows for easy reading in cooking applications.
Features at-a-glance
CAL Check™ – When the HI145 is turned on, a calibration test is immediately performed. With this unique feature, the HI145 series performs a self-check of its calibration status and displays it on the LCD, ensuring accuracy, repeatability, and condence in readings.
HACCP Compliant – The HI145 is in compliance with food regulations, making it an ideal instrument for use as a tool for control in HACCP analysis.
AISI 316 Stainless Steel Probe – The HI145 thermometer is equipped with a 125 mm (5”) long AISI 316 stainless steel probe. The sharp conical tip provides fast response and improved accuracy over the entire range.
Enhanced Battery Life – The HI145 uses AAA batteries and offers an exceptional 10,000 hours of continuous use.
Auto Shut-off – The battery life of the thermometer is preserved by this feature which automatically turns the meter off after 8 minutes of non-use.
SKU | HI145-01 |
Product Name | T-Shaped Fahrenheit Thermometer (125mm) – HI145-01 |
Quote Required | Yes |
Temperature Range | -58.0 to 428°F |
Temperature Resolution | 0.1°F (-58.0 to 199.9°F); 1°F (200 to 428°F) |
Temperature Accuracy | ±0.6°F (-4 to 194°F); ±0.4% F.S. (outside) |
Automatic Shut-Off | after 8 minutes of non-use |
Battery Type/Life | 1.5V AAA / approximately 10,000 hours of continuous use |
Environment | -10 to 50°C (14 to 122°F); RH max 95% |
Dimensions | 92 x 165 x 38 mm (3.6 x 6.5 x 1.5”) |
Weight | 65 g (2.3 oz) |
Ordering Information | HI145-01 is supplied complete with 125 mm probe, battery, and instruction manual. |
HI145 thermometers were developed for HACCP programs that require high standards of performance with simplicity of use. The durable T-shaped handle fits comfortably in hand and is ideal for applications where applied force is necessary for insertion, such as with incoming meat inspection and semi-frozen foods. The LCD positioned on top of the meter allows for easy reading in cooking applications.
Features at-a-glance
CAL Check™ – When the HI145 is turned on, a calibration test is immediately performed. With this unique feature, the HI145 series performs a self-check of its calibration status and displays it on the LCD, ensuring accuracy, repeatability, and condence in readings.
HACCP Compliant – The HI145 is in compliance with food regulations, making it an ideal instrument for use as a tool for control in HACCP analysis.
AISI 316 Stainless Steel Probe – The HI145 thermometer is equipped with a 300 mm (12”) long AISI 316 stainless steel probe, ideal for monitoring hot liquids, such as in deep frying and soup preparation.
Enhanced Battery Life – The HI145 uses AAA batteries and offers an exceptional 10,000 hours of continuous use.
Auto Shut-off – The battery life of the thermometer is preserved by this feature which automatically turns the meter off after 8 minutes of non-use.
SKU | HI145-30 |
Product Name | T-Shaped Fahrenheit Thermometer (300mm) – HI145-30 |
Quote Required | Yes |
Temperature Range | -58.0 to 428°F |
Temperature Resolution | 0.1°F (-58.0 to 199.9°F); 1°F (200 to 428°F) |
Temperature Accuracy | ±0.6°F (-4 to 194°F); ±0.4% F.S. (outside) |
Automatic Shut-Off | after 8 minutes of non-use |
Battery Type/Life | 1.5V AAA / approximately 10,000 hours of continuous use |
Environment | -10 to 50°C (14 to 122°F); RH max 95% |
Dimensions | 92 x 340 x 38 mm (3.6 x 13.4 x 1.5”) |
Weight | 80 g (2.8 oz.) |
Ordering Information | HI145-30 is supplied complete with 300mm probe, battery, and instruction manual. |
HI145 thermometers were developed for HACCP programs that require high standards of performance with simplicity of use. The durable T-shaped handle fits comfortably in hand and is ideal for applications where applied force is necessary for insertion, such as with incoming meat inspection and semi-frozen foods. The LCD positioned on top of the meter allows for easy reading in cooking applications.
Features at-a-glance
CAL Check™ – When the HI145 is turned on, a calibration test is immediately performed. With this unique feature, the HI145 series performs a self-check of its calibration status and displays it on the LCD, ensuring accuracy, repeatability, and condence in readings.
HACCP Compliant – The HI145 is in compliance with food regulations, making it an ideal instrument for use as a tool for control in HACCP analysis.
AISI 316 Stainless Steel Probe – The HI145 thermometer is equipped with a 125 mm (5”) long AISI 316 stainless steel probe. The sharp conical tip provides fast response and improved accuracy over the entire range.
Enhanced Battery Life – The HI145 uses AAA batteries and offers an exceptional 10,000 hours of continuous use.
Auto Shut-off – The battery life of the thermometer is preserved by this feature which automatically turns the meter off after 8 minutes of non-use.
SKU | HI145-00 |
Product Name | T-Shaped Celsius Thermometer (125mm) – HI145-00 |
Quote Required | Yes |
Temperature Range | -50.0 to 220°C |
Temperature Resolution | 0.1°C (-50.0 to 199.9°C); 1°C (200 to 220°C) |
Temperature Accuracy | ±0.3°C (-20 to 90°C); ±0.4% F.S. (outside) |
Automatic Shut-Off | after 8 minutes of non-use |
Battery Type/Life | 1.5V AAA / approximately 10,000 hours of continuous use |
Environment | -10 to 50°C (14 to 122°F); RH max 95% |
Dimensions | 92 x 165 x 38 mm (3.6 x 6.5 x 1.5”) |
Weight | 65 g (2.3 oz) |
Ordering Information | HI145-00 is supplied complete with 125 mm probe, battery, and instruction manual. |
HI145 thermometers were developed for HACCP programs that require high standards of performance with simplicity of use. The durable T-shaped handle fits comfortably in hand and is ideal for applications where applied force is necessary for insertion, such as with incoming meat inspection and semi-frozen foods. The LCD positioned on top of the meter allows for easy reading in cooking applications.
Features at-a-glance
CAL Check™ – When the HI145 is turned on, a calibration test is immediately performed. With this unique feature, the HI145 series performs a self-check of its calibration status and displays it on the LCD, ensuring accuracy, repeatability, and condence in readings.
HACCP Compliant – The HI145 is in compliance with food regulations, making it an ideal instrument for use as a tool for control in HACCP analysis.
AISI 316 Stainless Steel Probe – The HI145 thermometer is equipped with a 300 mm (12”) long AISI 316 stainless steel probe, ideal for monitoring hot liquids, such as in deep frying and soup preparation.
Enhanced Battery Life – The HI145 uses AAA batteries and offers an exceptional 10,000 hours of continuous use.
Auto Shut-off – The battery life of the thermometer is preserved by this feature which automatically turns the meter off after 8 minutes of non-use.
SKU | HI145-20 |
Product Name | T-Shaped Celsius Thermometer (300mm) – HI145-20 |
Quote Required | Yes |
Temperature Range | -50.0 to 220°C |
Temperature Resolution | 0.1°C (-50.0 to 199.9°C); 1°C (200 to 220°C) |
Temperature Accuracy | ±0.3°C (-20 to 90°C); ±0.4% F.S. (outside) |
Automatic Shut-Off | after 8 minutes of non-use |
Battery Type/Life | 1.5V AAA / approximately 10,000 hours of continuous use |
Environment | -10 to 50°C (14 to 122°F); RH max 95% |
Dimensions | 92 x 340 x 38 mm (3.6 x 13.4 x 1.5”) |
Weight | 80 g (2.8 oz.) |
Ordering Information | HI145-20 is supplied complete with 300mm probe, battery, and instruction manual. |
The HI98517 KEY® is a pocket thermometer with an interchangeable probe for quick spot measurements. With a fast response time, KEY® is ideal for quality control and industrial temperature monitoring.
With a response time of less than 20 seconds in water, KEY® is ideal for quality control and industrial temperature monitoring. Four interchangeable temperature probes are available to meet specific requirements, each constructed out of rugged AISI 316 stainless steel. The HI98517-13 probe is for penetration and is included with the meter, providing a fast response typical of a thermocouple probe. The HI98517-15 and HI98517-30 probes are for general liquid monitoring, while the HI98517-12 is a surface probe made for machine shops, molding facilities, and welding surfaces.
Features at-a-glance
- AISI 316 Stainless Steel Probes – The HI98157 KEY® thermometer is equipped with a 130 mm (5.1”) long AISI 316 stainless steel probe. The sharp conical tip provides fast response and improved accuracy over the entire range. Additional probes can be exchanged for more accurate measurements in liquids and on surfaces.
- Enhanced Battery Life – The HI98517 offers an exceptional 700 hours of continuous use.
- Battery Error Prevention System (BEPS) – The Battery Error Prevention System detects when the batteries become too weak to ensure reliable measurements.
SKU | HI98517 |
Product Name | KEY® Pocket Thermometer – HI98517 |
Quote Required | Yes |
Temperature Range | -40 to 550°C |
Temperature Resolution | 1°C |
Temperature Accuracy | ±2°C |
Battery Type/Life | 1.5V (4) / approximately 700 hours of continuous use |
Environment | 0 to 50°C (32 to 122°F); RH max 95% |
Dimensions | 175 x 41 x 23 mm (6.2 x 1.4 x 0.8’’) |
Weight | 78 g (3.0 oz) |
Ordering Information | HI98517 is supplied with HI98517-13 probe, batteries, and instruction manual. |
