Rheometers & Viscometers
- Centrifuge
- Liquid Handling and Dispensing
- Microplate Instruments
- Ph & Electrochemistry
- Rheometers & Viscometers
- Thermoregulators
- Laboratory Water Purification Systems
- Hot Plates, Stirrers & Shakers
- Biological Safety Cabinets, Fume Hoods & Clean Benches
- Cold Storage - Laboratory Refrigerators & Freezers
- Spectrometers & Spectrophotometers
- Turbidity Meters
HAAKE™ Viscotester™ iQ Rheometers
Measure and analyze the rheological properties of a wide range of liquid, paste and semi-solid samples with the Thermo Scientific™ HAAKE™ Viscotester™ iQ and Viscotester iQ Air rheometers. The Viscotester iQ rheometer is an intuitive solution designed to meet the daily rheological requirements of QC labs. The Viscotester iQ Air rheometer is the smallest commercially available oscillation air bearing rheometer in the world. Both set new standards in modularity, ease of use, increased efficiency, and intelligent user guidance, from simple viscosity determinations to complex rheological investigationMeasure and analyze the rheological properties of a wide range of liquid, paste and semi-solid samples with the Thermo Scientific™ HAAKE™ Viscotester™ iQ and Viscotester iQ Air rheometers. The Viscotester iQ rheometer is an intuitive solution designed to meet the daily rheological requirements of QC labs. The Viscotester iQ Air rheometer is the smallest commercially available oscillation air bearing rheometer in the world. Both set new standards in modularity, ease of use, increased efficiency, and intelligent user guidance, from simple viscosity determinations to complex rheological investigation
Frequency Range0.1 to 50 Hz
Minimum deflection angle: 10 µradTorque Range0.01 mNm – 100 mNm
Torque resolution: 0.001 mNmAngular Resolution1.25 µrad
Angular velocity range: 0.001 rad/s – 157 rad/s
0.01 rpm – 1500 rpmWeight (Metric)18 kg (HAAKE Viscotester iQ rheometer incl. Peltier temperature module, heat exchanger and measuring geometry)DescriptionHAAKE Viscotester iQ Air rheometer (air bearing)Operating Temperature Range
Universal Peltier controlled Module (TM-PE-C)
Coaxial cylinders: -5 °C up to 160 °C
Plates and cones: 0 °C up to 140 °C
Depending on ambient temperature
Universal Liquid controlled Module (TM-LI-C32 / – C48)
Coaxial cylinders: -20 °C up to 180 °C
Plates and cones: -10 °C up to 160 °C
Depending on the circulator model and the bath liquid
Peltier controlled Plate (TM-PE-P) 0 °C up to 160 °C
Liquid controlled Plate (TM-LI-P) -20 °C up to 180 °C
Depending on the circulator model and the bath liquid
Electrically controlled Cylinder (TM-EL-C) up to 300 °C
Available for pressure cell configuration
Measuring MethodIn rotation: Controlled Rate (CR), Controlled Stress (CS)
In oscillation: Controlled Deformation (CD), Controlled Stress (CS)Shear RateShear rate range: 0.004 s -1 – 11415 s -1
(Depending on the measuring geometry used. Calculated theoretical values.)
Shear stress range: 0.04 Pa – 63660 Pa
(Depending on the measuring geometry used. Calculated theoretical values.)Viscosity RangeIn rotation: 0.001 Pa s – 600000 Pa s (Depending on the measuring geometry used. Calculated theoretical values.)
In oscillation: 0.03 Pa s and higherMeasuring GeometriesCoaxial cylinders, double-gap cylinders, parallel plates, cones, vane rotorsInterfaceTCP/IP for communication with PC
USB: 1 port for USB flash drive for HAAKE Viscotester iQ RheoApp, 1 port for keyboard or barcode readerDimensions (L x W x H)270mm x 500mm x 500mm
(HAAKE Viscotester iQ rheometer incl. Peltier temperature module, heatv exchanger and measuring geometry)Power SupplyAutoswitch: 100-240 VAC, 50/60 HzPatentsQuick coupling: DE102012018592
Design: Europe 001320964, Japan 1471355, China ZL201230476257.6, US 07066585Unit SizeEach
262-0100
HAAKE™ MARS™ Rheometers
Meet the demands of advanced quality control and applied R&D with the Thermo Scientific™ HAAKE™ MARS™ Rheometer. This highly flexible Modular Advanced Rheometer System (MARS) provides accuracy, easy handling, and many application-oriented solutions for comprehensive material characterization. New Connect Assist functionality allows for effortless, error-free exchange of measuring geometries and temperature modules to speed up your workflow. Bring the HAAKE MARS’ flexibility to your lab for rapidly changing testing requirements today and into the future
Frequency Range0.000001 to 100 HzTorque RangeMin. torque rotation CS (µNm): 0.01
Min. torque rotation CR (µNm): 0.01
Min. torque oscillation CS (µNm): 0.002
Min. torque oscillation CD (µNm): 0.002
Max. torque (mNm): 200
Torque resolution (nNm): 0.1Angular Resolution(nrad) 12Weight (Metric)59kgBearingAir bearing: 2x radial, 1x axialWidth (Metric)600mmDepth (Metric)600mmMotorType: Drag cupMotor Inertia(kgm2) 10-5DescriptionHAAKE MARS 60 RheometerNormal ForceMin. Normal force (N): 0.01
Max. Normal force (N): 50
Normal force resolution (N): 0.001Height (Metric)890mmOperating Temperature RangeMin. temperature (°C): -150
Max. temperature (°C): 600
Depending on temperature moduleSpeed RangeMax. lift travel (mm): 240
Gap resolution (µm): 0.5
Min. lift speed (µm/s): 0.02
Max. lift speed (mm/s) 20Rotational Speed RangeMin. rotational speed CS (rpm): 10-7
Min. rotational speed CR (rpm): 10-8
Max. rotational speed (rpm): 4500
Step in velocity (ms): 10Unit SizeEach
379-0600
HAAKE™ CaBER™ 1 Capillary Breakup Extensional Rheometer
The Thermo Scientific HAAKE CaBER Capillary Breakup Extensional Rheometer has been discontinued. We continue to offer spare parts and services for the CaBER rheometer to support your daily work
| Description | Rheometer, Extensional; HAAKE CaBER 1 |
| Unit Size | Each |
398-0001
HAAKE™ PCR Process Control Rheometer
Thermo Scientific™ HAAKE PCR (Process Control Rheometer) measures the melt index at standard ASTM loads and (HAAKE PCR 630) still maintains a minimum lag time which remains almost constant over the wide melt index measurement range. The HAAKE PCR online rheometer features innovative process control technology for online rheological measurements of melt index and melt viscosity
| Description | PCR 630 online rheometer |
| Unit Size | Each |
550-0030
HAAKE™ MARS™ iQ Rotational Rheometer
| Frequency Range | 0.01 to 20 Hz |
| Torque Range | Min. torque rotation: 0.2 mNm Max. torque rotation: 125 mNm Min. torque oscillation: 0.2 mNm Max torque oscillation: 125 mNm Torque resolution: 2.0 µNm |
| Angular Resolution | 0.63 µrad |
| Weight (Metric) | 57 kg |
| Operating Temperature Range | Depending on temperature module, cooling option and upper hood Min. temperature: -60 °C Max. temperature: 400 °C |
| Speed Range | Max. lift travel: 230 mm Gap resolution: 0.05 µm Min. lift speed: 0.05 µm/s Max. lift speed: 20 mm/s |
| Item Description | HAAKE MARS iQ Rheometer – ball-bearing |
| Rotational Speed Range | Min. angular velocity: 0.001 rad/s Max. angular velocity: 209.4 rad/s Min. rotation speed: 0.01 rpm Max rotation speed: 2000 rpm |
| Dimensions (L x W x H) | 480 x 390 x 670 mm |
| Unit Size | Each |
379-0800
HAAKE™ Viscotester™ 3 Rotational Viscometer
Perform viscosity measurements with ease. The Thermo Scientific™ HAAKE™ Viscotester™ 3 rotational viscometer ensures quick, reliable tests for QC applications.
Use it as a handheld viscometer or on a lab stand. Color coding ensures measuring geometries match the analysis, the display is readable in any lighting, and the viscometer remembers the reference point measurement for you. All that comes in a ready-to-go carrying case.
HAAKE Viscotester 3 Rotational Viscometer is the replacement for the discontinued Thermo Scientific™ HAAKE™ Viscotester™ 1 plus and 2 plus Rotational Viscometer
| Description | HAAKE Viscotester 3 Rotational Viscometer for higher viscosity measurements |
| Operating Temperature Range | Up to 150 °C |
| Item Description | Base viscometer comes in carrying case with instrument holder (for lab stand), one measuring cup (No. 3), three rotors (No. 1, 2 and 3), four rechargeable batteries and one power supply adapter. Easily upgrade your Thermo Scientific HAAKE Viscotester 2 Plus viscometer to this model; the results are compatible. |
| Rotational Speed Range | 62,5 rpm |
| Viscosity Range | 30 – 400 000 mPa s |
| Power Supply | Operable by battery or power supply |
| Measuring Accuracy | +/- 5% FSD (rotors R1, R2, R3) +/- 7.5% FSD (rotor R5) +/- 10% FSD (rotor R4) |
| Unit Size | Each |
399-0112
HAAKE™ Falling Ball Viscometer C
Measure viscosity precisely using only a stop watch and no power connection with the Thermo Scientific™ HAAKE™ Falling Ball Viscometer C.
The measuring accuracy of the HAAKE Falling Ball Viscometer C is among the highest available in any type of viscometer, particularly when supported with the precise temperature control of a circulator. It provides accurate measurement of the viscosity of transparent Newtonian liquids and gases. The HAAKE Falling Ball Viscometer C also meets the requirements of the German DIN 53015 and ISO 12058 standard, and it is accepted as an official reference instrument
| Temperature Range (Metric) | -20° to 150°C |
| Product Type | Falling Ball Viscometer |
| Viscosity Range | 0.5 mPas – 10^5 mPas (cP) |
| Comparability | <1% |
| Glass | Borosilicate glass |
| Material | Falling tube, balls 1, 2 and G, borosilicate glass; balls 3, 4, 5 and 6, Nickel iron alloy |
| Reproducibility | <0.5% |
| Certifications/Compliance | The HAAKE Falling Ball viscometer meets the requirements of the DIN 53015/ISO 12058 standards |
| Unit Size | Each |
3560001
HAAKE™ Viscotester™ E, D and C Rotational Viscometer
The HAAKE Viscotester E, D, C viscometers are discontinued.
Available options for consideration are HAAKE Viscotester iQ rheometers or the HAAKE Viscotester 3 viscometer. If you need assistance in selecting the best solution for your needs, please contact us for support.
| Electrical Requirements | 100 – 240V 50/60 Hz |
| Measuring Accuracy | ±1% FSD |
| Product Type | Rotational Viscometer |
| Viscosity | 100 mPa to 13.000.000 mPa (R-Version), 15 mPa to 2.000.000 mPa (L-Version) |
| Reproducibility | 0.002 |
| Hertz | 50/60 Hz |
| Voltage | 100 – 240V |
| Description | E, D and C Rotational Viscometer |
| Viscosity Range | depending on version (L or R) |
| Certifications/Compliance | The HAAKE Viscotester E, D and C meet the following standards: BS: 6075, 5350 ISO: 2555, 1652 ASTM: 115, 789, 1076, 1084, 1286, 1417, 1439, 1638, 1824, 2196,2336, 2364, 2393, 2556, 2669, 2849,2983, 2994, 3232, 3236, 3716 |
| Unit Size | Each |
362-0012
Indicating Half Cell Ion Selective Electrodes
Indicating half cell ion selective electrodes must be integrated into a workflow with a reference electrode and temperature probe (ATC). Electrodes with ion-specific membranes only contain the indicator electrode component that is able to determine the ion concentration of water and other aqueous solutions. To measure fluoroborate ions in water and aqueous solutions accurately, use the Fluoroborate Half-cell ion selective electrode, which utilizes the Orion™ Fluoroborate Sensing Module.
Combination pH ORP Titration Electrodes (69)
Automatic Temperature Compensation Probes (15)
Micro pH Electrodes (5)
Combination Ion Selective Electrodes (23)
pH Electrode Accessories (13)
Conductivity Electrodes (27)
Dissolved Oxygen and BOD Probes (9)
Indicating Half Cell Ion Selective Electrodes (5)
Ion Selective Electrode Accessories (2)
Electrochemistry Analyzers Online Sensors (6)
Indicating Half Cell Electrodes (5)
Multiparameter Electrode Sets (4)
Dissolved Oxygen Probe Accessories (17)
Conductivity Cell Accessories (1)
Salinity Cell Accessories (1)
Orion™ ISE Filling Solutions
Enhance the performance and extend the life of your ion selective electrodes with Thermo Scientific™ Orion™ ISE Filling Solutions. These solutions are specially formulated to work with the recommended ion selective electrodes and prevent electrode interferences from filling solution.
Combination pH ORP Titration Electrodes (69)
Automatic Temperature Compensation Probes (15)
Micro pH Electrodes (5)
Combination Ion Selective Electrodes (23)
pH Electrode Accessories (13)
Conductivity Electrodes (27)
Dissolved Oxygen and BOD Probes (9)
Indicating Half Cell Ion Selective Electrodes (5)
Ion Selective Electrode Accessories (2)
Electrochemistry Analyzers Online Sensors (6)
Indicating Half Cell Electrodes (5)
Multiparameter Electrode Sets (4)
Dissolved Oxygen Probe Accessories (17)
Conductivity Cell Accessories (1)
Salinity Cell Accessories (1)
| Description | Fill Solution For Ammonia High Performance ISE |
| Quantity | 60 mL |
| For Use With (Equipment) | Thermo Scientific Orion Ion Selective Electrodes |
| Type | Ion Selective Electrode Filling Solution |
| Unit Size | Each |
951209
Orion™ ISE Ionic Strength Adjustors (ISA) and Special Reagents
Take more accurate and reproducible ISE measurements with Thermo Scientific™ Orion™ ISE Ionic Strength Adjustors (ISA) and Special Reagents. Ionic strength adjustors are used for analysis with ion selective electrodes, and special reagents are used with some ion selective electrodes
Combination pH ORP Titration Electrodes (69)
Automatic Temperature Compensation Probes (15)
Micro pH Electrodes (5)
Combination Ion Selective Electrodes (23)
pH Electrode Accessories (13)
Conductivity Electrodes (27)
Dissolved Oxygen and BOD Probes (9)
Indicating Half Cell Ion Selective Electrodes (5)
Ion Selective Electrode Accessories (2)
Electrochemistry Analyzers Online Sensors (6)
Indicating Half Cell Electrodes (5)
Multiparameter Electrode Sets (4)
Dissolved Oxygen Probe Accessories (17)
Conductivity Cell Accessories (1)
Salinity Cell Accessories (1)
| Concentration | 10 ppm |
| Description | Acid Reagent for Residual Chlorine Electrode |
| For Use With (Application) | Ionic strength adjustors used for analysis with ion selective electrodes and special reagents used with some ion selective electrodes |
| Packaging | Bottle |
| Quantity | 475 mL |
| For Use With (Equipment) | Ion Selective Electrode |
| Type | Ion Selective Electrode Reagents |
| Unit Size | Each |
977011
Electrochemistry Analyzers Online Sensors
Electrochemistry analyzers online sensors are able to measure specific species quantity using electrochemistry sensors as a detection method. Sensors may have the ability to connect to the internet. The Thermo Scientific™ Orion™ Online ATC Probe is able to withstand rigorous use and takes automatically corrected electrode slope variation pH measurements with ease.
Orion™ 2001SC ROSS combination pH Electrode
Take high purity pH measurements with the highest accuracy and precision using the Thermo Scientific™ Orion™ 2001SC ROSS Combination pH Electrode. Combining pH sensing and reference electrodes, this combination electrode provides a fast response for online pH electrodes.
Orion™ Industrial Ion Selective Electrode
Orion™ 2001SC ROSS combination pH Electrode
Orion™ 2002SS and 2002CC Conductivity Cells
Orion™ pHR Process ROSS™ Electrode
Orion™ pHR Process ROSS™ Electrode
| Accuracy (pH) | 0.02 |
| Diameter (English) | 0.5 in. |
| Description | 2001SC ROSS combination pH electrode |
| Diameter (Metric) | 12 mm |
| Type | pH Electrode |
| Drift | <0.5 pH units for 30 days |
| Electrolyte | ROSS |
| Isopotential Point | pH 7 |
| Length (English) Cable | 5 in. |
| Length (Metric) Cable | 125 mm |
| pH Range | 0.01 to 14.00 |
| Slope | 92 to 102% |
| Temperature (English) Range | 32°F to 212°F |
| Temperature (Metric) Range | 0°C to 100°C |
| Certifications/Compliance | Certificate of Analysis (COA), Certificate of Conformance (COC) |
| Unit Size | Each |
2001SC
Orion™ 2002SS and 2002CC Conductivity Cells
Orion™ Industrial Ion Selective Electrode
Orion™ 2001SC ROSS combination pH Electrode
Orion™ 2002SS and 2002CC Conductivity Cells
Orion™ pHR Process ROSS™ Electrode
Orion™ pHR Process ROSS™ Electrode
| Description | Stainless steel 2-electrode conductivity cell |
| Type | Conductivity Cell |
| Length (English) Cable | 16.4 ft. |
| Length (Metric) Cable | 5 m |
| Max. Pressure | 6.9 bar (100psi) |
| Measurement Ranges | 0.01 uS/cm to 300 mS/cm |
| Temperature (English) Range | 32°F to 212°F |
| Temperature (Metric) Range | -5°C to +100°C |
| Certifications/Compliance | ISO 9001:2000 |
| Unit Size | Each |
2002SS
Orion™ pHR Process ROSS™ Electrode
Save time and money while achieving fast, accurate measurements in a variety of samples with the Thermo Scientific™ Orion™ pHR Process ROSS™ Electrode. With minimal maintenance and a longer lifetime, this product offers superior performance, reliability and longevity for a variety of applications, including pure water. The double junction design with replaceable salt bridge lengthens electrode life providing better value. When performance starts to degrade, simply remove and replace the old salt bridge and electrolyte to rejuvinate response.
Orion™ Industrial Ion Selective Electrode
Orion™ 2001SC ROSS combination pH Electrode
Orion™ 2002SS and 2002CC Conductivity Cells
Orion™ pHR Process ROSS™ Electrode
Orion™ pHR Process ROSS™ Electrode
ContainsPre-amplifierDescriptionpHR Reference Fill Solution Bridge, with pre-amplifier; 30 ft. cableTypeFill Solution Bridge with Pre-amplifierIncludeswith pre-amplifier; 30 ft. cableLength (English) Cable30 ft.Length (Metric) Cable6.1 mMax. Flow Rate9.1 ft./sec.Max. Transmission Distance3000 ft. (914m)Offset0±25mVpH Range0 to 14pH Measurement Response30 seconds for 95% of change for a ±3 pH changepH Measurement Repeatability±0.075Pressure Range0 to 100psigSlope92 to 102%Temperature (Metric) Range0°C to 95°CTemperature Repeatability±0.5°CTemperature Response<3 minutes for 90% change for a 10°C temperature changeCertifications/ComplianceCertificate of Analysis (COA), Certificate of Conformance (COC)Unit SizeEach
SH36A9E230
Orion™ ROSS™ Sure-Flow™ pH Electrode with Sure-flow junction, BNC connector
Measure general pH samples as well as viscous or colloidal samples with the free-flowing sleeve junction design of the Thermo Scientific™ Orion™ 8172BNWP ROSS™ Sure-Flow™ pH Electrode.
Orion™ 900100 Sure-Flow™ Reference Half-Cell Electrode
Orion™ 800500U ROSS Ultra™ Reference Electrode
Orion™ 8101BNWP ROSS™ Half-Cell Electrode
Orion™ 900200 Sure-Flow™ Reference Half-Cell Electrode
Orion™ 800500U ROSS Ultra™ Reference Electrode
| Description | Orion ROSS Sure-Flow pH electrode |
| Diameter (Metric) Cap | 16 mm |
| Filling Solution Type | 3M KCl (810007) |
| For Use With (Application) | Biological/Pharmaceutical –TRIS buffer, proteins, enzymes; Emulsions – Foods, cosmetics, oils; Emulsions – Petroleum products, paint; General Purpose – Most sample types; High Ionic Strength – Acids, bases, brines, pH > 12 or pH < 2; Low Ionic Strength – |
| For Use With (Equipment) | Standard pH Meter, BNC connector |
| Includes | Detachable bulb guard, 2 x 60mL bottles of ORion ROSS electrode fill solution |
| Internal Reference | ROSS |
| Precision | 0.01 |
| Temperature (English) Operating | 32°F to 212°F |
| Connector Types | WPBNC |
| Junction | Sure-Flow |
| Material | Glass Body |
| Temperature (Metric) Operating | 0°C to 100°C |
| Type | Combination pH Electrode, glass body, BNC waterproof connector |
| pH Range | 0 to 14 |
| Unit Size | Each |
8172BNWP
Orion™ 900100 Sure-Flow™ Reference Half-Cell Electrode
Precisely measure with ion-selective electrodes using the Thermo Scientific™ Orion™ 900100 Sure-Flow™ Reference Half-Cell Electrode, a sleeve-type Ag/AgCl reference electrode.
Orion™ 900100 Sure-Flow™ Reference Half-Cell Electrode
Orion™ 800500U ROSS Ultra™ Reference Electrode
Orion™ 8101BNWP ROSS™ Half-Cell Electrode
Orion™ 900200 Sure-Flow™ Reference Half-Cell Electrode
Orion™ 800500U ROSS Ultra™ Reference Electrode
| Description | 900100 Sure-Flow Reference Half Cell Electrode |
| Diameter (Metric) Body | 12 mm |
| Electrode | Single Junction Ref Electrode |
| Filling Solution Type | Orion 900001 Filling Solution |
| For Use With (Application) | ISE determinations |
| Internal Reference | Ag/AgCl |
| Length (Metric) | 110 mm |
| Reference Electrolyte | Equitransferent solution with Ag/AgCI |
| Junction | Sure-Flow Sleeve Junction |
| Temperature (Metric) Operating | 0°C to 100°C |
| Type | Reference Half-Cell Electrode |
| pH Range | 0 to 14 |
| Unit Size | Each |
900100
Orion™ 900200 Sure-Flow™ Reference Half-Cell Electrode
Perform ISE determinations with the Thermo Scientific™ Orion™ 900200 Sure-Flow™ Reference Half-Cell Electrode, a double junction reference electrode.
Orion™ 900100 Sure-Flow™ Reference Half-Cell Electrode
Orion™ 800500U ROSS Ultra™ Reference Electrode
Orion™ 8101BNWP ROSS™ Half-Cell Electrode
Orion™ 900200 Sure-Flow™ Reference Half-Cell Electrode
Orion™ 800500U ROSS Ultra™ Reference Electrode
Description900200 Sure-Flow Reference Half-Cell ElectrodeDiameter (Metric) Body12 mmDiameter (Metric) Cap16 mmFilling Solution Typevariety of filling solutionsInternal ReferenceAg/AgCl Double JunctionLength (Metric)110 mmLength (Metric) Cable1 mConnector TypesPin-tipJunctionSure-FlowMaterialEpoxy BodyTemperature (Metric) Operating0°C to 100°CTypeReference Half-Cell ElectrodepH Range0 to 15Unit SizeEach
900200TS
Orion™ 8101BNWP ROSS™ Half-Cell Electrode
Get results three to five times more precise than those obtained with conventional electrodes with the Thermo Scientific™ Orion™ 8101BNWP ROSS™ Half-Cell Electrode. This electrode provides stable readings to 0.01 pH in less than 30 seconds.
Orion™ 900100 Sure-Flow™ Reference Half-Cell Electrode
Orion™ 800500U ROSS Ultra™ Reference Electrode
Orion™ 8101BNWP ROSS™ Half-Cell Electrode
Orion™ 900200 Sure-Flow™ Reference Half-Cell Electrode
Orion™ 800500U ROSS Ultra™ Reference Electrode
DescriptionBNC waterproof connectorDiameter (Metric) Body12 mmDiameter (Metric) Cap16 mmDriftDrift is less than 0.002 pH per day, restandardization is minimizedFor Use With (Equipment)Orion ROSS Reference Electrode 800300 or 800500UInternal ReferenceROSSLength (Metric)120 mmPrecision0.01Connector TypesBNCJunctionDoubleMaterialGlass BodyTemperature (Metric) Operating0°C to 100°CTypeHalf-Cell Electrode, BNC waterproof connectorpH Range0 to 14Unit SizeEach
8101BNWP
Orion™ Low Resistance pH Electrode, with BNC waterproof connector
Use the Thermo Scientific™ Orion™ 9162BNWP Low Resistance pH Electrode in viscous solutions. The electrode includes silver/silver chloride references, widely used because of their accuracy and broad temperature range.
Orion™ 900100 Sure-Flow™ Reference Half-Cell Electrode
Orion™ 800500U ROSS Ultra™ Reference Electrode
Orion™ 8101BNWP ROSS™ Half-Cell Electrode
Orion™ 900200 Sure-Flow™ Reference Half-Cell Electrode
Orion™ 800500U ROSS Ultra™ Reference Electrode
| Description | With BNC waterproof connector |
| Diameter (Metric) Body | 12 mm |
| Diameter (Metric) Cap | 16 mm |
| For Use With (Equipment) | Orion pH Meter |
| Internal Reference | Ag/AgCl |
| Length (Metric) | 110 mm |
| Precision | 0.02 |
| Connector Types | BNC |
| Material | Glass Body |
| Temperature (Metric) Operating | 0°C to 90°C |
| Type | Half-Cell Electrode, low resistance, BNC connector |
| pH Range | 0 to 14 |
| Unit Size | Each |
9162BNWP
Orion™ BOD Adapters for Polarographic Dissolved Oxygen Probe
Help ensure proper and optimal probe performance with Thermo Scientific™ Orion™ BOD Adapters for Polarographic Dissolved Oxygen Probes. Adapters include stir funnel and electrode adapter sleeve for BOD bottle
Orion™ 900100 Sure-Flow™ Reference Half-Cell Electrode
Orion™ 800500U ROSS Ultra™ Reference Electrode
Orion™ 8101BNWP ROSS™ Half-Cell Electrode
Orion™ 900200 Sure-Flow™ Reference Half-Cell Electrode
Orion™ 800500U ROSS Ultra™ Reference Electrode
| Description | For use with 083005MD, 083010MD, 083025MD, 083060MD, 083005A, 083010A, 083005 |
| Includes | Stir funnel and electrode adaptor sleeve |
| For Use With (Equipment) | Orion Dissolved Oxygen Probe (lab or field) |
| Type | BOD Adapter |
| Unit Size | Each |
080360
Orion™ RDO™ Calibration Sleeve
Replace the Thermo Scientific™ Orion™ RDO™ Calibration Sleeve on RDO probes as needed.
| Description | RDO Calibration Sleeve |
| For Use With (Equipment) | RDO Probe |
| Type | Calibration Sleeve |
| Unit Size | Each |
087003
Orion™ Membrane Caps for Polarographic Dissolved Oxygen Probe
Reduce probe servicing time and eliminate assembly problems using Thermo Scientific™ Orion™ Membrane Caps for Polarographic Dissolved Oxygen Probe. Convenient screw-on membrane caps help ensure optimal probe performance
| Includes | Three Caps |
| Probe Type | Polarographic DO |
| For Use With (Equipment) | Orion DO Probes 080510MD, 081010MD, 081010 |
| Type | Dissolved Oxygen Probe Accessories |
| Unit Size | Each |
081003
Orion™ Gas-Sensing ISE membranes
Choose from loose or preassembled membranes for ease of use with Thermo Scientific™ Orion™ Gas-Sensing ISE membranes.
Fresh membranes provide optimum performance with gas-sensing ion selective electrodes. Ammonia electrodes require different membranes if using standard electrode or high performance ammonia electrode.
DescriptionGas-Sensing ISE membraneFor Use With (Equipment)Nitrogen Oxide ElectrodeTypeGas-Sensing ISE MembraneUnit SizeEach
954604
Orion™ Protective Guards for Conductivity and Dissolved Oxygen Probes
Provide additional probe protection and weight with Thermo Scientific™ Orion™ Protective Guards for Conductivity and Dissolved Oxygen Probes. Use the all stainless-steel guard when optimum protection and weight are required. Combine the stainless steel cap and plastic sleeve when weight for submersion and standard protection is needed. Or, when minimal weight and protection are required, use the all-plastic guard.
| Description | Plastic |
| Material | Stainless steel, plastic |
| For Use With (Equipment) | Conductivity Cells, Dissolved Oxygen Probes |
| Type | Protective Guards for Conductivity Cells and Dissolved Oxygen Probes |
| Unit Size | Each |
081045
Orion™ Calibration Sleeves for Dissolved Oxygen Probes
Calibrate and store probes with Thermo Scientific™ Orion™ Calibration Sleeves for Dissolved Oxygen Probes.
| Description | Calibration Sleeve with Stand |
| For Use With (Equipment) | Dissolved Oxygen Probe |
| Type | Calibration Sleeve |
| Unit Size | Each |
086021A
Orion™ Probe Maintenance Kits for Dissolved Oxygen Meters
Help ensure optimal performance of Orion polarographic dissolved oxygen probes with Thermo Scientific™ Orion™ Probe Maintenance Kits for Dissolved Oxygen Meters, which include electrolyte solution, polishing disk and two membrane caps.
| Description | Probe maintenance kit |
| Includes | 2 Membrane caps, electrolyte solution, and polishing disk |
| For Use With (Equipment) | Dissolved Oxygen Probe and Meter |
| Type | Dissolved Oxygen Probe Accessories |
| Unit Size | Each |
080513
Help ensure optimal performance of Orion polarographic dissolved oxygen probes with Thermo Scientific™ Orion™ Probe Maintenance Kits for Dissolved Oxygen Meters, which include electrolyte solution, polishing disk and two membrane caps.
| Description | Probe maintenance kit |
| Includes | 2 Membrane caps, electrolyte solution, and polishing disk |
| For Use With (Equipment) | Dissolved Oxygen Probe and Meter |
| Type | Dissolved Oxygen Probe Accessories |
| Unit Size | Each |
080513
Orion™ Ion Selective Electrode Accessories
Use Thermo Scientific™ Orion™ Ion Selective Electrode Accessories for solid state and plastic membrane ion selective electrodes.
| Description | Handle for Ion+ ISE Combination Plastic Membrane Electrodes with BNC waterproof connector |
| For Use With (Equipment) | Ion Selective Electrode |
| Type | Ion Selective Electrode Accessories |
| Unit Size | Each |
9700BNWP
Orion™ Resistor Kits and Flow Cell Conductivity Probe Accessories
Confidently perform conductivity tests and measurements with Thermo Scientific™ Orion™ Accessories. Find an additional or replacement Glass Flow Cell for use with the Orion 2-Cell Ultra-pure Conductivity Probe. Use the Thermo Scientific Orion Conductivity Resistor Calibration Kit to verify the performance of Thermo Scientific™ Orion™ Versa Star Pro™ and Orion Star™ Bench and Portable Conductivity Meters. Each conductivity calibration kit includes six resistors that simulate nominal conductance values between 1 μS and 100 mS and have 8 pin MiniDIN connect
| Description | Conductivity Calibration Resistor Kit with 8 Pin MiniDIN Connection |
| For Use With (Equipment) | 3-Star Conductivity Meter, 4-Star pH/Conductivity Meter, 5-Star pH/DO/Conductivity Meter, 5-Star pH/ISE/DO/Conductivity Meter |
| Type | Conductivity Calibration Resistor Kit |
| Unit Size | Each |
1010001
